summaryrefslogtreecommitdiffstats
path: root/configure.ac
Commit message (Collapse)AuthorAgeFilesLines
* build: add --enable-asan configure optionsNiels de Vos2018-08-301-6/+23
| | | | | | | | | | | | | | Introduce a `./configure --enable-asan` to build with `-fsanitize=address -fno-omit-frame-pointer` options. This uses the libasan.so shared library, so that needs to be available. While running builds with the ASAN options, several linker issues surfaced and these have been addressed with this change as well. Building with --enable-asan has been tested on Fedora 28. Change-Id: I428a9da70dd8f7d0056cfbe5c398619a571469b2 Updates: #492 Signed-off-by: Niels de Vos <ndevos@redhat.com>
* build: use standard PKG_CHECK_MODULES for libxml2 availabilityNiels de Vos2018-08-161-2/+1
| | | | | | | | | | | | | In case the development parts of libxml2 are not installed, it was required to re-run ./autogen.sh to cleanup the cached values for the check. This is not nice towards users. By using the standard PKG_CHECK_MODULES for libxml-2.0 the results of the check are not cached and will be probed again when running ./configure. Change-Id: I3c4586e5555a521be5d4fb61bdb873ae0317311a Fixes: bz#1599219 Reported-by: Sachidananda Urs <surs@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com>
* build: remove bundled arg-standaloneNiels de Vos2018-07-281-22/+15
| | | | | | | | | | | | | | libargp or argp-standalone is available on all commonly used distributions. There is no need to bundle an unmaintained version of argp-standalone in this repository anymore. FreeBSD places the argp.h file in /usr/local/include when argp-standalone is installed. This path is not added to CPPFLAGS by default, so thats done in configure.ac as well. Change-Id: I384a53ab0a008ec9d48fd83afeaf8fbc197e91ee Fixes: bz#1609337 Signed-off-by: Niels de Vos <ndevos@redhat.com>
* build: remove uuid from contrib/Niels de Vos2018-07-271-4/+17
| | | | | | | | | | | | | | Bundling libuuid is not needed anymore, all current distributions provide it now. Some OS's provide their own uuid_*() functions in libc. These may not be fully compatible with libuuid.so found on Linux systems. In that case, either e2fsprogs-libuuid can be installed, or support for the native uuid_*() functions can be added to libglusterfs/src/compat-uuid.h. Change-Id: Icfa48caea81307a3bca549364969c2038911942b Fixes: bz#1607319 Signed-off-by: Niels de Vos <ndevos@redhat.com>
* build: rename event.h to gf-event.hNiels de Vos2018-07-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Newer FreeBSD versions (noticed with 10.3-RELEASE) provide a event.h file that on occasion gets included instead of the libglusterfs file. When this happens, 'struct event_pool' will not be defined and building will fail with errors like: autoscale-threads.c:18:55: error: incomplete definition of type 'struct event_pool' int thread_count = pool->eventthreadcount; ~~~~^ autoscale-threads.c:17:16: note: forward declaration of 'struct event_pool' struct event_pool *pool = ctx->event_pool; ^ This problem is caused by 'pkg-config --cflags uuid' that adds /usr/local/include to the GF_CPPFLAGS. The use of libuuid is preferred so that the contrib/uuid/ directory can be removed. By renaming event.h to gf-event.h there is no conflict between the different event.h files anymore and compiling on FreeBSD works without issues. Change-Id: Ie69f6b8a4f8f8e9630d39a86693eb74674f0f763 Updates: bz#1607319 Signed-off-by: Niels de Vos <ndevos@redhat.com>
* Fix compile warningsXavi Hernandez2018-07-101-3/+0
| | | | | | | | | | | This patch fixes compile warnings that appear with newer compilers. The solution applied is only to remove the warnings, but it doesn't always solve the problem in the best way. It assumes that the problem will never happen, as the previous code assumed. Change-Id: I6e8470d6c2e2dbd3bd7d324b5fd2f92ffdc3d6ec updates: bz#1193929 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* cloudsync: Adding s3 plugin for cloudsyncSusant Palai2018-05-301-0/+22
| | | | | | | | | | | | | | | | | | This is a plugin which provides an interface to retrive files from amazon-s3 which are archived in to s3. Users need to give the above information for cloudsync to retrieve the file from s3. TODO: 1- A separate commit in to developer-guide will detail about the usage of this plugin in more detail. 2- Need to create target file in aws-bucket with "gfid" names. Helps avoiding name collisions. Change-Id: I2e4a586f4e3f86164de9178e37673a07f317e7d9 Updates: #387 Signed-off-by: Susant Palai <spalai@redhat.com>
* build: Disallow unresolved symbol referencesPrashanth Pai2018-05-181-6/+21
| | | | | | | | | | | | | | | | | | | | | | | | In the past, it was often[1] forgotten for xlators to be linked against the symbols they refer to. This often caused glusterd2 to fail while loading xlator's shared object (.so) file. This change adds "--no-undefined" as a linker flag which causes the linker to treat unresolved symbol references as an error and hence fail linking. [1]: https://review.gluster.org/#/c/19912/ https://review.gluster.org/#/c/19664/ https://review.gluster.org/#/c/19056/ https://review.gluster.org/#/c/17659/ https://bugzilla.redhat.com/show_bug.cgi?id=1532238 Bonus: Added cloudsync and utime xlator's generated source files to .gitignore Updates: bz#1193929 Change-Id: I9604a4a87b7313a5fa43bda5fdb37dfa7ef8facd Signed-off-by: Prashanth Pai <ppai@redhat.com>
* utime: ctime client side xlatorKotresh HR2018-05-061-0/+2
| | | | | | | | | | | | | | The client side utime xlator does two things. 1. Update unix epoch time in frame->root->ctime 2. Update the frame->root->flags based on the fop which indicates time attributes that should be updated for the parent/entry. Credits: Rafi KC <rkavunga@redhat.com> Updates: #208 Change-Id: I9cad297040c70798a0a8468a080eb4aeff73138d Signed-off-by: Kotresh HR <khiremat@redhat.com>
* feature/thin-arbiter: Implement thin-arbiter translatorAshish Pandey2018-04-251-0/+2
| | | | | | | Updates #352 Change-Id: I3d8caa6479dc8e48bec62a09b056971bb061f0cf Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* build: exclude '--with-previous-options' to prevent infinite loopXie Changlong2018-04-161-1/+1
| | | | | | | | | | | | Reproducible Steps: 1. cd glusterfs/; rm -rf *; git reset --hard #clean repo 2. cd extras/LinuxRPM/; ./make_glusterrpms #it's ok here 3. ./make_glusterrpms #infinite loop 4. cd ../../; make distclean #infinite loop Change-Id: I162953d4576cedea7c6f6c631a77163a5cca023e updates: #439 Signed-off-by: Xie Changlong <xiechanglong@cmss.chinamobile.com>
* core/build/various: python3 compat, prepare for python2 -> python3Kaleb S. KEITHLEY2018-04-121-45/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note 1) we're not supposed to be using #!/usr/bin/env python, see https://fedoraproject.org/wiki/Packaging:Guidelines?rd=Packaging/Guidelines#Shebang_lines Note 2) we're also not supposed to be using "!/usr/bin/python, see https://fedoraproject.org/wiki/Changes/Avoid_usr_bin_python_in_RPM_Build#Quick_Opt-Out The previous patch (https://review.gluster.org/19767) tried to do too much in one patch, so it was abandoned. This patch does two things: 1) minor cleanup of configure(.ac) to explicitly use python2 2) change all the shebang lines to #!/usr/bin/python2 and add them where they were missing based on warnings emitted during rpmbuild. In a follow-up patch python2 will eventually be changed to python3. Before that python2-isms (e.g. print, string.join(), etc.) need to be converted to python3. Some of those can be rewritten in version agnostic python. E.g. print statements become print() with "from __future_ import print_function". The python 2to3 utility will be used for some of those. Also Aravinda has given guidance in the comments to the first patch for changes. updates: #411 Change-Id: I471730962b2526022115a1fc33629fb078b74338 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* experimental/cloudsync: Download xlator for archival featureSusant Palai2018-04-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spec-files: https://review.gluster.org/#/c/18854/ Overview: * Cloudsync maintains three file states in it's inode-ctx i.e 1 - LOCAL, 2 - REMOTE, 3 - DOWNLOADING. * A data modifying fop is allowed only if the state is LOCAL. If the state is REMOTE or DOWNLOADING, client will download or wait for the download to finish initiated by other client. * Multiple download and upload from different clients are synchronized by inodelk. * In POSIX a state check is done (part of different commit)before allowing the fop to continue. If the state is remote/downloading the fop is unwound with EREMOTE. The client will then download the file and continue with the fop again. * Basic Algo for fop (let's say write fop): - If LOCAL -> resume fop - If REMOTE -> - INODELK - STAT (this gets state and heal the state if needed) - DOWNLOAD - resume fop Note: * Developers will need to write plugins for download, based on the remote store they choose. In phase-1, support will be added for one remote store per volume. In future, more options for multiple remote stores will be explored. TODOs: - Implement stat/lookup/readdirp to return size info from xattr - Make plugins configurable - Implement unlink fop - Add metrics collection - Add sharding support Design Contributions: Aravinda V K <avishwan@redhat.com> Amar Tumballi <amarts@redhat.com> Ram Ankireddypalle <areddy@commvault.com> Susant Palai <spalai@redhat.com> updates: #387 Change-Id: Iddf711ee7ab4e946ae3e472ff62791a7b85e6d4b Signed-off-by: Susant Palai <spalai@redhat.com>
* build: revert configure --without-ipv6-default behaviourKaleb S. KEITHLEY2018-04-021-14/+31
| | | | | | | | | | | | | | | | | | | | | | | | | patch https://review.gluster.org/19692 breaks gluster on systems with IPv6 enabled but don't have IPv6 reverse DNS. Also it defaulted to enabling ipv6-default regardless of whether --with-ipv6-default or --without-ipv6-default were specified in the options to configure. (Also the patch was merged without review.) Prefer libtirpc over glibc rpc. On newer linux with tirpc and without glibc rpc use tirpc (obviously) on less new linux with both tirpc and glibc rpc default to use tirpc, unless --without-tirpc is specified, in which case use glibc rpc On less new linux without tirpc fall back to glib rpc (obviously) ipv6-default requires libtirpc. It is off by default. It must be explicitly enabled with --with-ipv6-default. If --with-ipv6-default is specified, but tirpc is not available, disable it and issue a warning Change-Id: Ib96a230fafb83ec83a71948fe55af1215a7a6ffa BUG: 1562052 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* build: Fix misleading TIRPC result in configure summaryJames Le Cuirot2018-03-241-5/+4
| | | | | | | | | | | | | | Requesting ipv6-default even if you explicitly disable libtirpc will then implicitly enable libtirpc because that is required. That is fine but the configure summary should not then show TIRPC as disabled when it is not. The result has also been made clearer by stating that TIRPC is "missing" when it has been tried but not found. BUG: 1553938 Change-Id: I945bd6859aaf3defa682b0d05ee34a9827b9c45f Signed-off-by: James Le Cuirot <chewi@gentoo.org>
* build: Fix configure --without-ipv6-default behaviourJames Le Cuirot2018-03-241-1/+1
| | | | | | | | | | | | | | | | The current behaviour disables ipv6-default when no switch is given at all but otherwise checks if libtirpc was requested, regardless of whether you have given --with-ipv6-default or --without-ipv6-default. I believe the intention was to enable when libtirpc is requested by default but otherwise respect the switch given. This is important because ipv6-default breaks Gluster for systems that have IPv6 disabled. BUG: 1553926 Change-Id: I76b91ae2699574b2e5b777453732bb5cbd79bbca Signed-off-by: James Le Cuirot <chewi@gentoo.org>
* build: fix typo, spelling mistakeKaleb S. KEITHLEY2018-03-021-1/+1
| | | | | | | transistional -> transitional Change-Id: I1eb7e063288384458c305afea6d6c46a358701ff Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* xlators/features/namespace: Add namespace xlator and link into brick graphVarsha Rao2018-02-211-0/+2
| | | | | | | | | | | | | | | | | | | | | The following release-3.8-fb branch patch is upstreamed: > features/namespace: Add namespace xlator and link into brick graph > Commit ID: dbd30776f26e > https://review.gluster.org/#/c/18041/ > By Michael Goulet <mgoulet@fb.com> Changes in this patch: Removes extra config.h and namespace.h file in namespace.c Adds default_getspec_cbk to libglusterfs.sym Rename dict_for_each to dict_foreach_inline Remove fd.h header file stack.h Add test case for truncate, open and symlink This patch is required to forward port io-threads namespace patch. Updates: #401 Change-Id: Ib88c95b89eecee9b8957df8a4c8712c899c761d1 Signed-off-by: Varsha Rao <varao@redhat.com>
* build: add --without-server optionNiels de Vos2018-02-191-7/+15
| | | | | | | | | | | | | | | | With Gluster 4.0 we will not provide the server components for EL6 and older. At one point Gluster 4.x will get GlusterD2, which requires Golang tools in the distribution. EL6 does not contain these at the moment. With this change, it is possible to `./configure --without-server` which prevents building glusterd and the xlators for the bricks. Building RPMs can pass `--without server` and the glusterfs-server sub-package will not be created. Change-Id: I97f5ccf9f2c76e60d9af83915fc59fae57ad6d25 BUG: 1074947 Signed-off-by: Niels de Vos <ndevos@redhat.com>
* build: Remove unwanted autoconf messages for libtirpcAnoop C S2018-02-041-2/+0
| | | | | | | | | | | | | AC_MSG_RESULT is normally used when it is preceded by AC_MSG_CHECKING during explicit checking of certain requirements. With PKG_CHECK_MODULES being used for checking the presence of libtirpc itself generates the following message: checking for TIRPC... yes Change-Id: I3f088a45ef2ced6f6fd9e1524e758c812deecb8f BUG: 1536186 Signed-off-by: Anoop C S <anoopcs@redhat.com>
* build: restore ability to control verbosity settingsJan Engelhardt2018-01-261-8/+0
| | | | | | | | | | | | | | | `make V=1` is broken — no commands are printed whatsoever. At the same time, `make V=0` *also* is broken in that no summary lines ("CC  foo.o") are printed, either. Kill the annoying hardcoded --quiet in configure.ac, since it seems to override everything that automake offers. Change-Id: I377c0e0469619a33586afb4a93dde6d241e7bc21 Fixes: #381 BUG: 1539023 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Niels de Vos <ndevos@redhat.com> [ndevos: silence rpc/xdr/gen rpgcen]
* build: glibc has removed rpc headers and rpcgen in Fedora28, use libtirpcKaleb S. KEITHLEY2018-01-241-18/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Other Linux distributions are doing the same; some others have already done so. Switch to libtirpc(-devel) and unbundled rpcgen packages. For now rpcgen is still provided by the glibc-rpcgen RPM, but rpcsvc-proto's rpcgen subpackage is available now but will not be used until glibc-rpcgen is retired. (note, rpcsvc-proto's rpcgen is just named rpcgen-...rpm. I.e. not rpcsvc-proto-rpcgen.) Right now either one will satisfy the BuildRequires: rpcgen. Also, when a .spec file has BuildRequires: foo-devel it is not necessary to also have: BuildRequires: foo or even: BuildRequires: foo foo-devel The foo-devel package has a dependency on foo, which will install foo automatically. It's usually also not necessary to have a corresponding Requires: foo as the rpmbuild process will also automatically determine the install-time dependencies. And other minor glusterfs.spec.in cleanup of ipv6-default, including sorting the argument definitions because the comment says "keep them sorted" (Though nobody appears to have ever sorted them in the first place.) Change-Id: I86f847dfda0fef83e22c6e8b761342d652a2d9ba BUG: 1536186 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* dentry fop serializer: added new server side xlator for dentry fop serializationSakshi Bansal2018-01-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problems addressed by this xlator : [1]. To prevent race between parallel mkdir,mkdir and lookup etc. Fops like mkdir/create, lookup, rename, unlink, link that happen on a particular dentry must be serialized to ensure atomicity. Another possible case can be a fresh lookup to find existance of a path whose gfid is not set yet. Further, storage/posix employs a ctime based heuristic 'is_fresh_file' (interval time is less than 1 second of current time) to check fresh-ness of file. With serialization of these two fops (lookup & mkdir), we eliminate the race altogether. [2]. Staleness of dentries This causes exponential increase in traversal time for any inode in the subtree of the directory pointed by stale dentry. Cause : Stale dentry is created because of following two operations: a. dentry creation due to inode_link, done during operations like lookup, mkdir, create, mknod, symlink, create and b. dentry unlinking due to various operations like rmdir, rename, unlink. The reason is __inode_link uses __is_dentry_cyclic, which explores all possible path to avoid cyclic link formation during inode linkage. __is_dentry_cyclic explores stale-dentry(ies) and its all ancestors which is increases traversing time exponentially. Implementation : To acheive this all fops on dentry must take entry locks before they proceed, once they have acquired locks, they perform the fop and then release the lock. Some documentation from email conversation: [1] http://www.gluster.org/pipermail/gluster-devel/2015-December/047314.html [2] http://www.gluster.org/pipermail/gluster-devel/2015-August/046428.html With this patch, the feature is optional, enable it by running: `gluster volume set $volname features.sdfs enable` Also the feature is tested for a month without issues in the experiemental branch for all the regression. Change-Id: I6e80ba3cabfa6facd5dda63bd482b9bf18b6b79b Fixes: #397 BUG: 1304962 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Signed-off-by: Amar Tumballi <amarts@redhat.com> Signed-off-by: Sunny Kumar <sunkumar@redhat.com>
* build: Use pkg-config to get libtirpc flagsJames Le Cuirot2017-11-291-4/+4
| | | | | | | This benefits cross-compiling and other exotic setups. Change-Id: Id9f168728d96264ccab23d2e618fa2b4003455a3 Signed-off-by: James Le Cuirot <chewi@gentoo.org>
* build: Allow libtirpc to be explicitly requestedJames Le Cuirot2017-11-221-2/+10
| | | | | | | | Some distributions like Gentoo no longer include the RPC stuff in their glibc packages. Change-Id: Ic47065e9c2f5a0ccd860df9d7185eff59990ff10 Signed-off-by: James Le Cuirot <chewi@gentoo.org>
* geo-rep: Refactoring Config and Arguments parsingAravinda VK2017-11-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fixed Python pep8 issues - Removed dead code - Rewritten configuration management - Rewritten Arguments/subcommands handling - Added Args upgrade to accommodate all these changes without changing glusterd code - use of md5 removed, which was used to hash the brick path for workdir Both Master and Slave nodes will have subdir for session in the format "<mastervol>_<primary_slave_host>_<slavevol> $GLUSTER_LOGDIR/geo-replication/<mastervol>_<primary_slave_host>_<slavevol> $GLUSTER_LOGDIR/geo-replication-slaves/<mastervol>_<primary_slave_host>_<slavevol> Log file paths renamed since session info is available with directory name itself. $LOG_DIR_MASTER/ - gsyncd.log - Gsyncd, Worker monitor logs - mnt-<brick-path>.log - Aux mount logs, mounted by each worker - changes-<brick-path>.log - Changelog related logs(One per brick) $LOG_DIR_SLAVE/ - gsyncd.log - Slave Gsyncd logs - mnt-<master-node>-<master-brick-path>.log - Aux mount logs, mounted for each connection from master-node:master-brick - mnt-mbr-<master-node>-<master-brick-path>.log - Same as above, but mountbroker setup Fixes: #73 Change-Id: I2ec2a21e4e2a92fd92899d026e8543725276f021 Signed-off-by: Aravinda VK <avishwan@redhat.com>
* libglusterfs/atomic: Improved atomic supportXavier Hernandez2017-11-141-3/+9
| | | | | | | | | | | | | | | | This patch solves a detection problem in configure.ac that prevented that compilation detects builtin __atomic or __sync functions. It also adds more atomic types and support for other atomic functions. An special case has been added to support 64-bit atomics on 32-bit systems. The solution is to fallback to the mutex solution only for 64-bit atomics, but smaller atomic types will still take advantage of builtins if available. Change-Id: I6b9afc7cd6e66b28a33278715583552872278801 BUG: 1510397 Signed-off-by: Xavier Hernandez <jahernan@redhat.com>
* gluster: IPv6 single stack supportKevin Vigor2017-10-241-0/+22
| | | | | | | | | | | | | | | | | | | | | | Summary: - This diff changes all locations in the code to prefer inet6 family instead of inet. This will allow change GlusterFS to operate via IPv6 instead of IPv4 for all internal operations while still being able to serve (FUSE or NFS) clients via IPv4. - The changes apply to NFS as well. - This diff ports D1892990, D1897341 & D1896522 to the 3.8 branch. Test Plan: Prove tests! Reviewers: dph, rwareing Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: I34fdaaeb33c194782255625e00616faf75d60c33 BUG: 1406898 Reviewed-on-3.8-fb: http://review.gluster.org/16059 Reviewed-by: Shreyas Siravara <sshreyas@fb.com> Tested-by: Shreyas Siravara <sshreyas@fb.com>
* build: make it possible to build cleanly 2x in a rowNiels de Vos2017-10-131-3/+1
| | | | | | | | | | | | | | | | | 'make clean' does not cleanup everything, and some of the files get cleaned too eagerly. Several files are being packaged in a 'make dist' tarball, that get rebuild each time anyway. Specifically, this change prevents - libglusterfs/src/generator.pyc from laying around - keeping rpc/xdr/gen/*.x symlinks - modifying tests/basic/{fuse,gfapi}/Makefile each run - including tests/env.rc and events/src/eventtypes.py in the tarball Change-Id: I774dd1abf3a9d3b6a89b938cf6ee7d7792c59a82 BUG: 1501317 Reported-by: Patrick Matthäi <pmatthaei@debian.org> Signed-off-by: Niels de Vos <ndevos@redhat.com>
* rpc: TLSv1_2_method() is deprecated in OpenSSL-1.1Kaleb S. KEITHLEY2017-09-131-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fedora 26 has OpenSSL-1.1. Compile-time warnings indicate that TLSv1_2_method() is now deprecated. As per the SSL man page: TLS_method(), TLS_server_method(), TLS_client_method() These are the general-purpose version-flexible SSL/TLS methods. The actual protocol version used will be negotiated to the highest version mutually supported by the client and the server. The supported protocols are SSLv3, TLSv1, TLSv1.1 and TLSv1.2. Applications should use these methods, and avoid the version- specific methods described below. ... TLSv1_2_method(), ... ... Note that OpenSSL-1.1 is the version of OpenSSL; Fedora 25 and RHEL 7.3 and other distributions (still) have OpenSSL-1.0. TLS versions are orthogonal to the OpenSSL version. TLS_method() is the new — in OpenSSL-1.1 — version flexible function intended to replace the TLSv1_2_method() function in OpenSSL-1.0 and the older (?), insecure TLSv23_method(). (OpenSSL-1.0 does not have TLS_method()) Change-Id: I190363ccffe7c25606ea2cf30a6b9ff1ec186057 BUG: 1491025 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/18268 Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* debug/delay-gen: Implement delay-generation featurePranith Kumar K2017-08-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background: I was working on a customer issue where the disks were responding some times after seconds. It was becoming very difficult to recreate the issues in our labs, so had to come up with this feature. Requirements: We need an xlator which can delay x% of ops for y micro seconds. We should be able to enable delays for specific fops. This feature is modeled after error-gen. Most of the logic is borrowed from that xlator. This is a minimum implementation of the feature which satisfied the requirements I had. May be in future with more requirements and understanding of the problem further we can improve upon this implementation. Here are the commands and what they do: Enable delay-gen: (This is similar to how err-gen is enabled on the brick side) - gluster volume set <volname> delay-gen posix Set the percentage of fops that need to be delayed - gluster volume set <volname> delay-gen.delay-percentage 50 Default is 10% Set the delay in micro seconds - gluster volume set <volname> delay-gen.delay-duration 500000 Default is 100000 Set comma separated fops to be delayed - gluster v set r2 delay-gen.enable read,write Default is all fops. Fixes #257 Change-Id: Ib547bd39cc024c9cdb63754d21e3aa62fc9d6473 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: https://review.gluster.org/17591 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* tools/setgfid2path: Tool to set GFID to Path xattr in brick backendAravinda VK2017-07-281-0/+2
| | | | | | | | | | | | | | | | | | | | Once storage/gfid2path feature is enabled using `gluster volume set <volname> storage.gfid2path enable`, it starts recording the gfid2path xattr on each files. But this feature will not add xattr to the existing files. This tool accepts the file path as argument and sets the necessary xattr required for this feature. Change-Id: I75ad82c86ce482950645e687ff2e33b413fa53da Updates: #139 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: https://review.gluster.org/17839 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Kotresh HR <khiremat@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* scripts/shared_storage : systemd helper scripts to mount shared storage post ↵Hendrik Visage2017-06-201-0/+1
| | | | | | | | | | | | | | | reboot Reported-by: Hendrik Visage <hvjunk@gmail.com> Change-Id: Ibcff56b00f45c8af54c1ae04974267c2180f5f63 BUG: 1452527 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: https://review.gluster.org/17339 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* brick mux: Detach brick on posix health check failureAtin Mukherjee2017-05-151-2/+2
| | | | | | | | | | | | | | With brick mux enabled, we'd need to detach a particular brick if the underlying backend has gone bad. This patch addresses the same. Change-Id: Icfd469c7407cd2d21d02e4906375ec770afeacc3 BUG: 1450630 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17287 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* build: add site.h as a place to put environment-specific definesJeff Darcy2017-05-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most people consume Gluster in one of two ways: * From packages provided by their OS/distribution vendor * By building themselves from source For the first group it doesn't matter whether configuration is done in a configure script, via command-line options to that configure script, or in a header file. All of these end up as edits to some file under the packager's control, which is then run through their tools and process (e.g. rpmbuild) to create the packages that users will install. For the second group, convenience matters. Such users might not even have a script wrapped around the configure process, and editing one line in a header file is a lot easier than editing several in the configure script. This also prevents a messy profusion of configure options, dozens of which might need to be added to support a single such user's preferences. This comes back around as greater simplicity for packagers as well. This patch defines site.h as the header file for options and parameters that someone building the code for themselves might want to tweak. The project can ship one version to reflect the developers' guess at the best defaults for most users, and sophisticated users with unusual needs can override many options at once just by maintaining their own version of that file. Everybody wins. Further guidelines for how to determine whether an option should go in configure.ac or site.h are explained within site.h itself. Fixes #201 Change-Id: I5b8fb518d42450737423c4c1f43ebeb3130b4ff6 Signed-off-by: Jeff Darcy <jdarcy@fb.com> Reviewed-on: https://review.gluster.org/17206 Tested-by: Jeff Darcy <jeff@pl.atyp.us> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* rpc: Remove accidental IPV6 changesKaushal M2017-05-051-15/+0
| | | | | | | | | | | | | | They snuck in with the HALO patch (07cc8679c) Change-Id: I8ced6cbb0b49554fc9d348c453d4d5da00f981f6 BUG: 1447953 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: https://review.gluster.org/17174 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* SELinux : implementation of SELinux translatorManikandan Selvaganesh2017-05-031-0/+2
| | | | | | | | | | | | | | | | | | | | The patch implement a part of SELinux translator to support setting SELinux contexts on files in a glusterfs volume. URL: https://github.com/gluster/glusterfs-specs/blob/master/accepted/SELinux-client-support.md Change-Id: Id8916bd8e064ccf74ba86225ead95f86dc5a1a25 BUG: 1318100 Fixes : #55 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/13762 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Halo Replication feature for AFR translatorKevin Vigor2017-05-021-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Halo Geo-replication is a feature which allows Gluster or NFS clients to write locally to their region (as defined by a latency "halo" or threshold if you like), and have their writes asynchronously propagate from their origin to the rest of the cluster. Clients can also write synchronously to the cluster simply by specifying a halo-latency which is very large (e.g. 10seconds) which will include all bricks. In other words, it allows clients to decide at mount time if they desire synchronous or asynchronous IO into a cluster and the cluster can support both of these modes to any number of clients simultaneously. There are a few new volume options due to this feature: halo-shd-latency: The threshold below which self-heal daemons will consider children (bricks) connected. halo-nfsd-latency: The threshold below which NFS daemons will consider children (bricks) connected. halo-latency: The threshold below which all other clients will consider children (bricks) connected. halo-min-replicas: The minimum number of replicas which are to be enforced regardless of latency specified in the above 3 options. If the number of children falls below this threshold the next best (chosen by latency) shall be swapped in. New FUSE mount options: halo-latency & halo-min-replicas: As descripted above. This feature combined with multi-threaded SHD support (D1271745) results in some pretty cool geo-replication possibilities. Operational Notes: - Global consistency is gaurenteed for synchronous clients, this is provided by the existing entry-locking mechanism. - Asynchronous clients on the other hand and merely consistent to their region. Writes & deletes will be protected via entry-locks as usual preventing concurrent writes into files which are undergoing replication. Read operations on the other hand should never block. - Writes are allowed from _any_ region and propagated from the origin to all other regions. The take away from this is care should be taken to ensure multiple writers do not write the same files resulting in a gfid split-brain which will require resolution via split-brain policies (majority, mtime & size). Recommended method for preventing this is using the nfs-auth feature to define which region for each share has RW permissions, tiers not in the origin region should have RO perms. TODO: - Synchronous clients (including the SHD) should choose clients from their own region as preferred sources for reads. Most of the plumbing is in place for this via the child_latency array. - Better GFID split brain handling & better dent type split brain handling (i.e. create a trash can and move the offending files into it). - Tagging in addition to latency as a means of defining which children you wish to synchronously write to Test Plan: - The usual suspects, clang, gcc w/ address sanitizer & valgrind - Prove tests Reviewers: jackl, dph, cjh, meyering Reviewed By: meyering Subscribers: ethanr Differential Revision: https://phabricator.fb.com/D1272053 Tasks: 4117827 Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1 BUG: 1428061 Signed-off-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: http://review.gluster.org/16099 Reviewed-on: https://review.gluster.org/16177 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* extras/hook-scripts: SELinux brick file context management scriptsBrian Foster2017-05-011-0/+20
| | | | | | | | | | | | | | | | | | | | | | The SELinux policy for gluster defines the glusterd_brick_t type to support server side SELinux (e.g., server side labels). Add convenience hook scripts that users/packagers can install to ensure that new bricks are labeled correctly. The volume create hook script adds a new SELinux file context for each brick path and runs a restorecon to label the brick. The volume delete hook removes the per-brick SELinux file context. Change-Id: I5f102db5382d813c4d822ff74e873a7a669b41db BUG: 1047975 Signed-off-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: https://review.gluster.org/6630 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: conditionally build legacy gNFS server and associated sub-packagingKaleb S. KEITHLEY2017-04-281-0/+12
| | | | | | | | | | | | | | | | | | | Plus some additional logic in glusterd to ensure gnfs (glusterfs) daemons are never started if server/nfs xlator is not installed. As a service, nfs is still initialized. The glusterfs-gnfs RPM may be installed or uninstalled independent of anything else, including on a system where gluster is actively running, so the existence of the xlator is always tested before trying to start gnfs. Change-Id: I56743ad1cb36a84917226d7d26cb9d015d441e66 BUG: 1326219 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16958 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* build: ensure autoconf template expansions resolve variablesCsaba Henk2017-04-271-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure the following autotools managed variables: GLUSTERFS_LIBEXECDIR GLUSTERD_MISCDIR GLUSTERD_VOLFILE LOCALSTATEDIR get expanded to literal paths when the configure script generates the installed versions of certain text files from *.in templates. This change is partly implemented by restoring some of the "eval echo $variable" style forced expansions in configure that were removed in If5219cadc51ae316f7ba2e2831d739235c77902d. BUG: 1444228 Change-Id: I3b31b1259c5101252bbc37861683894e6eae29e6 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/17096 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* debug/sink: add xlator to aid in resource leak debuggingNiels de Vos2017-04-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | This new xlator does not allocate any resources on init(). This makes it a good option to use for debugging xlator releated resources leaks on fini(). By putting the sink xlator as single xlator in a .vol file, and loading it through gfapi, we can investigate the resource leaks that are happening through gfapi (and the Gluster core). By extending the .vol file with additional xlators, it is possible to analyze resource leaks of single xlators. Change-Id: Idb5faa861b623dd5b2a988b181e669b0d52c2a0e BUG: 1425623 Fixes: #176 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16806 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* Implement negative lookup cachePoornima G2017-04-201-0/+2
| | | | | | | | | | | | | | | | | | | | | Before creating any file negative lookups(1 in Fuse, 4 in SMB etc.) are sent to verify if the file already exists. By serving these lookups from the cache when possible, increases the create performance by multiple folds in SMB access and some percentage in Fuse/NFS access. Feature page: https://review.gluster.org/#/c/16436 Updates #82 Change-Id: Ib1c0e7ac7a386f943d84f6398c27f9a03665b2a4 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16952 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* xlator: do not call dlclose() when debuggingNiels de Vos2017-04-071-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Valgrind can not show the symbols if a .so after calling dlclose(). The unhelpful ??? in the output gets resolved properly with this change: ==25170== 344 bytes in 1 blocks are definitely lost in loss record 233 of 324 ==25170== at 0x4C29975: calloc (vg_replace_malloc.c:711) ==25170== by 0x52C7C0B: __gf_calloc (mem-pool.c:117) ==25170== by 0x12B0638A: ??? ==25170== by 0x528FCE6: __xlator_init (xlator.c:472) ==25170== by 0x528FE16: xlator_init (xlator.c:498) ==25170== by 0x52DA8D6: glusterfs_graph_init (graph.c:321) ==25170== by 0x52DB587: glusterfs_graph_activate (graph.c:695) ==25170== by 0x5046407: glfs_process_volfp (glfs-mgmt.c:79) ==25170== by 0x5043B9E: glfs_volumes_init (glfs.c:281) ==25170== by 0x5044FEC: glfs_init_common (glfs.c:986) ==25170== by 0x50451A7: glfs_init@@GFAPI_3.4.0 (glfs.c:1031) By not calling dlclose(), the dynamically loaded .so is still available upon program exit, and Valgrind is able to resolve the symbols. This will add an additional leak, so dlclose() is called for normal builds, but skipped when configuring with "./configure --enable-valgrind" or passing the "run-with-valgrind" xlator option. URL: http://valgrind.org/docs/manual/faq.html#faq.unhelpful Change-Id: I2044e21b1b8fcce32ad1a817fdd795218f967731 BUG: 1425623 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16809 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* libglusterfs: provide standardized atomic operationsNiels de Vos2017-04-051-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The current macros ATOMIC_INCREMENT() and ATOMIC_DECREMENT() expect a lock as first argument. There are at least two issues with this approach: 1. this lock is unused on architectures that have atomic operations 2. some structures use a single lock for multiple variables By defining a gf_atomic_t type, the unused lock can be removed, saving a few bytes on modern architectures. Because the gf_atomic_t type locates the lock for the variable (in case of older architectures), each variable is protected the same on all architectures. This makes the behaviour across all architectures more equal (per variable locking, by a gf_lock_t or compiler optimization). BUG: 1437037 Change-Id: Ic164892b06ea676e6a9566f8a98b7faf0efe76d6 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16963 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* packaging: (ganesha) remove glusterfs-ganesha subpackage and related files)Kaleb S. KEITHLEY2017-03-211-3/+0
| | | | | | | | | | | | | | | Indiana Jones and the Temple of Ganesha HA, part two. remove glsuterfs-ganesha subpackage, superceded by storhaug Change-Id: I42a1fc59159add108d77080b9b130696216aa76d BUG: 1418417 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16506 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com>
* build: libgfxdr.so calls GF_FREE(), needs to link with -lglusterfsKaleb S. KEITHLEY2017-03-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous change to remove the xdrgen script exposed (or created) a recursive build dependency: libglusterfs needs the generated headers, and libgfxdr should be linked with libglusterfs for GF_FREE/__gf_free. (Much grumbling about libglusterfs being the kitchen sink of gluster elided. This would not be necessary if there were two or more libs, a gluster "runtime" library with common gluster code shared by the xlators and daemons, and a utility library with things like the rbtree, memory allocation, and whatnot.) So. Link at build time or link at runtime? For truth-and-beauty, link with libglusterfs.so at build time. Without truth-and-beauty, don't link with libglusterfs and rely on the other things that link with libglusterfs to provide resolution of __gf_free(). Truth-and-beauty it is. But how to generate the headers first, then build libglusterfs, then come back and build libgfxdr? Autotools is a maze of twisty passages, all different. Things that work with gnu make on linux don't work with the BSD make. Finally I hit on this solution. Add a shadow directory where make only generates the headers, then build libglusterfs using the generated headers, and finally build libgfxdr and link with libglusterfs. See original BZ 1330604 change http://review.gluster.org/14085 Change-Id: Iede8a30e3103176cb8f0b054885f30fcb352492b BUG: 1429696 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16873 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build/packaging: Debian and Ubuntu don't have /usr/libexecKaleb S. KEITHLEY2017-03-131-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | GLUSTERFS_LIBEXECDIR is effectively hard-coded to /usr/libexec/glusterfs in configure(.ac) Debian-based distributions don't have a /usr/libexec/ directory This issues is partially mitigated by the use of $libexecdir in some of the Makefile.am files, but even so the incorrectly defined GLUSTERFS_LIBEXECDIR results in various things such as gsyncd, glusterfind, eventsd, etc., trying to invoke other scripts and programs from a location that doesn't exist. And once we correctly define GLUSTERFS_LIBEXECDIR, then we might as well use it appropriatedly. Change-Id: If5219cadc51ae316f7ba2e2831d739235c77902d BUG: 1430841 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16880 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Joe Julian <me@joejulian.name> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* transport: allow OS to assign us a portKevin Vigor2017-03-121-0/+11
| | | | | | | | | | | | | | | | Replace complex and slow port selection code with bind(0) which already respects privileged ports. Change-Id: I408a8528e58e1aafcd32eba6a8f1a759e0bf274e BUG: 1405628 Reviewed-on-release-3.8-fb: http://review.gluster.org/16150 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16178 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* posix: use nanosecond accuracy when availableNiklas Hambüchen2017-03-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Programs that set mtime, such as `rsync -a`, don't work correctly on GlusterFS, because it sets the nanoseconds to 000. This creates problems for incremental backups, where files get accidentally copied again and again. For example, consider `myfile` on an ext4 system, being copied to a GlusterFS volume, with `rsync -a` and then `cp -u` in turn. You'd expect that after the first `rsync -a`, `cp -u` agrees that the file need not be copied. BUG: 1422074 Change-Id: I89c7b6a73e2e06c02851ff76b7e5cdfaa271e985 Signed-off-by: Niklas Hambüchen <mail@nh2.me> Reviewed-on: https://review.gluster.org/16667 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Jeff Darcy <jdarcy@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-14 09:30:49 +0000