summaryrefslogtreecommitdiffstats
path: root/extras
Commit message (Collapse)AuthorAgeFilesLines
* geo-rep: Handle copying of common_secret.pem.pub to slave correctly.Kotresh HR2015-01-211-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current Behaviour: 1. Geo-replication gsec_create creates common_secret.pem.pub file containing public keys of the all the nodes of master cluster in the location /var/lib/glusterd/ 2. Geo-replication create push-pem copies the common_secret.pem.pub to the same location on all the slave nodes with same name. Problem: Wrong public keys might get copied on to slave nodes in multiple geo-replication sessions simultaneosly. E.g. A geo-rep session is established between Node1(vol1:Master) to Node2 (vol2:Slave). And one more geo-rep session where Node2 (vol3) becomes master to Node3 (vol4) as below. Session1: Node1 (vol1) ---> Node2 (vol2) Session2: Node2 (vol3) ---> Node3 (vol4) If steps followed to create both geo-replication session is as follows, wrong public keys are copied on to Node3 from Node2. 1. gsec_create is done on Node1 (vol1) -Session1 2. gsec_create is done on Node2 (vol3) -Session2 3. create push-pem is done Node1 - Session1. -This overwrites common_secret.pem.pub in Node2 created by gsec_create in second step. 4. create push-pem on Node2 (vol3) copies overwrited common_secret.pem.pub keys to Node3. -Session2 Consequence: Session2 fails to start with Permission denied because of wrong public keys Solution: On geo-rep create push-pem, don't copy common_secret.pem.pub file with same name on to all slave nodes. Prefix master and slave volume names to the filename. NOTE: This brings change in manual steps to be followed to setup non-root geo-replication (mountbroker). To copy ssh public keys, extra two arguments needs to be followed. set_geo_rep_pem_keys.sh <mountbroker_user> <master vol name> \ <slave vol name> Path to set_geo_rep_pem_keys.sh: Source Installation: /usr/local/libexec/glusterfs/set_geo_rep_pem_keys.sh Rpm Installatino: /usr/libexec/glusterfs/set_geo_rep_pem_keys.sh Change-Id: If38cd4e6f58d674d5fe2d93da15803c73b660c33 BUG: 1183229 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9460 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* build: add a tmpfiles.d config file for /run/glusterNiels de Vos2015-01-192-0/+7
| | | | | | | | | | | | | | | | | | New distrubutions have a /run directory on a volatile tmpfs filesystem. This causes /run/gluster to be removed with each reboot. A tmpfiles.d configuration is used to create the directory on boot. EL5 and EL-6 do not use /run, current Fedora versions do. By checking %{_tmpfilesdir} in the .spec, we can identify if the distribution uses tmpfiles.d. Change-Id: I231e7d6603d573cb905246558e14a51577c0eb56 BUG: 1182934 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9458 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com>
* Stop logrotate from complaining about missing files.Jan-Hendrik Zab2014-12-111-1/+1
| | | | | | | | | | | | | | Previously logrotate reported errors for files missing in "/var/log/glusterfs/geo-replication-slaves/*/*.log". Fixed by reordering directives in the example config. Change-Id: I7cdb9e0d82f08aa27d5e26664660204fdeb8e98e BUG: 1170825 Signed-off-by: Jan-Hendrik Zab <zab@l3s.de> Reviewed-on: http://review.gluster.org/9264 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com>
* build: only install geo-rep scripts when enabledNiels de Vos2014-12-071-1/+1
| | | | | | | | | | | | | | When geo-replication is not enabled, the related scripts should not get installed. EPEL-5 does not support geo-replication, and the installed but unpackaged scripts cause rebuilding for .el5 to fail. BUG: 1169005 Change-Id: I1b6a352b73bd1ed1c5b330f54e26e81aed9a5a4e Reported-by: Lalatendu Mohanty <lmohanty@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9221 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* extras: geo-rep: Customize the generate gfid script to dirs listAravinda VK2014-11-261-5/+22
| | | | | | | | | | | generate-gfid-file.sh now accepts dirs list file and generate gfids only for those dirs list. Change-Id: Ia78a0a744dc8a079db56c38578cc6fcac2a6fa90 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/8540 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* extras/hookscripts: Fix set behaviour for user.cifs and user.smbRaghavendra Talur2014-11-111-12/+28
| | | | | | | | | | | | | | | Setting either of user.cifs or user.smb to disable should disable smb shares when the smb share is already available. Change-Id: I213ffca9cedc14107daeb30271d1f41dd9d7fcf4 BUG: 1105147 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/9042 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jose A. Rivera <jarrpa@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* logrotate: gluster logrotate config should not be globalLalatendu Mohanty2014-10-292-37/+45
| | | | | | | | | | | | | Issue : Previously glusterfs logrotate config file pollutes global config. So moved the directives inside the curly braces, so they don't pollute the global config state. Change-Id: I8836893dfcdf457d9c5d766612d687bfce64e2ae BUG: 1126802 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/8994 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Hooks : Infinite while loop introduced by another change.Meghana Madhusudhan2014-10-241-1/+5
| | | | | | | | | | | | | | | A change made to all the hook scripts introduced an infinite while loop in the script S31ganesha-reset.sh. It resulted in 100% CPU usage by this script. Change-Id: If62d8f0e065c6e6511363b8b26eae433f59bc5c3 BUG: 1155489 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/8966 Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Revert "extras: reverse test for '}' vs. following 'else' placement"Harshavardhana2014-10-141-5/+5
| | | | | | | | | | | | | This reverts commit 0a8371bdfdd88e662d09def717cc0b822feb64e8. Change-Id: I946f449ad213cea70fbbd9cd3951f5838b9f82e5 BUG: 1120646 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8927 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* extras: reverse test for '}' vs. following 'else' placementJeff Darcy2014-10-021-5/+5
| | | | | | | | | | | | The two-line form "}\nelse {" has been more common than the one-line form "} else {" in our code for years, and IMO for good reason (see the comment in the diff). Change-Id: Ic22c76fe76f0d91300daff36e755a18a8db58852 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8888 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: remove warnings for recommended styleJeff Darcy2014-09-231-51/+2
| | | | | | | | | | | | | | | | | | | | | | Specifically: * space before function arguments * brace around single statement Ideally we would *reverse* these tests so they warn under the exact opposite conditions, but that would mean learning the internals of a script written in a defective language with cryptic variable names and too few comments. Life's too short. For now, just cutting down on some of the spam (which might obscure more serious issues) should suffice. BUG: 1120646 Change-Id: I5ec684d0d788a34f29af9b1761743c8860973993 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8813 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Harshavardhana <harsha@harshavardhana.net>
* extras/checkpatch.pl: update coding guidelines scriptHarshavardhana2014-09-231-12/+1
| | | | | | | | | | | | | | - Allow 'quoted string split across lines' since its a GlusterFS common practice - Remove a useless "+" - perl 5.20 complains with following warning "Useless use of greediness modifier '+'" Change-Id: Ibaf276ec84757b3ecc3e6db7f5e720b8e8a12dff BUG: 1120646 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8811 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* extras/checkpatch.pl: linux kernel style patch verificationHarshavardhana2014-09-181-0/+4384
| | | | | | | | | | | | | | | | | | | | | | | | | | This is to bring in adherence to coding policy, prior to patch submission for review. - no tabs - no whitespace - indentation (linux style) etc. This is in the interest at large for the GlusterFS codebase to be more cleaner and readable. ./rfc.sh - now supports running this for all patches diverged from "origin/master" revision. NOTE: One should take this as a handle for good guidelines and never use it as a tool for correctness, use common-sense in all the cases ;-) Change-Id: Ib9a5ed207cde152cb92b8d38cec83e8ce9ef7f28 BUG: 1120646 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8181 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anders Blomdell <anders.blomdell@control.lth.se>
* osx: LaunchDaemon plist filename should start with org instead of comJustin Clift2014-09-152-2/+2
| | | | | | | | | Change-Id: I5e06bcc473224667387c555355d7e1e81bf4911b BUG: 1141659 Reviewed-on: http://review.gluster.org/8734 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* osx: Remove legacy extras/MacOSX directoryJustin Clift2014-09-153-116/+6
| | | | | | | | | | BUG: 1141682 Change-Id: Ic84171b070985a11b70d4548aa5e507a121d2164 Signed-off-by: Justin Clift <justin@gluster.org> Reviewed-on: http://review.gluster.org/8736 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Hook scripts should exit with correct exit status.Meghana Madhusudhan2014-08-312-9/+16
| | | | | | | | | | | | | | | | | | When volume set options other than nfs-ganesha.host and nfs-ganesha.enable are executed, the hook script S31ganesha-set.sh should exit with exit status 0. The present behaviour results in an error message in one of the logs that could be misleading. Similarly, hook script S30samba-set.sh should exit with exit status 0 if samba is not installed. Fixing the issue with a minor change in the script. Change-Id: I35d1dc8400bb7043385800ed97adc5321829437f BUG: 1122978 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/8385 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Regression test portability: mktempEmmanuel Dreyfus2014-08-204-4/+4
| | | | | | | | | | | | | | Linux mktemp accepts to run without a template, NetBSD mandates it. Since the template option has the same syntax, add it everywhere. While there, also do this in scripts outside of regression testing. BUG: 764655 Change-Id: I3ec140afbc9009257c81a56d77afcc21fef74cc4 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8432 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net>
* who-wrote-glusterfs: use the set $GITDM_REPO variablePatrick Uiterwijk2014-08-191-1/+1
| | | | | | | | | | | Change-Id: Ic119f83fff3930e164f3c81df1c9b60d5eb2d99f BUG: 1131272 Signed-off-by: Patrick Uiterwijk <puiterwijk@redhat.com> Reviewed-on: http://review.gluster.org/8495 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* extras/LinuxRPM: error in Makefile.amKaleb S. KEITHLEY2014-08-081-1/+1
| | | | | | | | | | Change-Id: I50de95ca6eff09338ce4a6f9f2b42aeccd10cae2 BUG: 1128192 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/8444 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-08-0711-123/+138
| | | | | | | | | | | | | | | | | | | | | | - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I2339a0d9275de5939ccad3e52b535598064a35e7 BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8246 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gluster vol set nfs-ganesha.enable off fails to unexport volume.Meghana Madhusudhan2014-08-051-1/+1
| | | | | | | | | | | | | | | | | | Due to a parameter type change in upstream nfs-ganesha ( v2.1 and above ), gluster vol set <volname> nfs-ganesha.enable off doesn't unexport the volume in question if it was already exported. A minor change in the hook script would result in the expected behaviour. Change-Id: I46f76f3cde6b6ebd7a94d5ee16f05a3648a2840f BUG: 1124711 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/8390 Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Make RPM's with current git tagAnders Blomdell2014-07-302-5/+21
| | | | | | | | | | | | | | | | 1. clear autom4te.cache 2. autogen.sh 3. configure --with-previous-options Change-Id: I90c1820d22207d18b1bb367444b21918467baea5 BUG: 1117921 Signed-off-by: Anders Blomdell <anders.blomdell@control.lth.se> Reviewed-on: http://review.gluster.org/8293 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* gluster: Fix the recursive goto outs in the source code.Avra Sengupta2014-07-212-3/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added a script check_goto.pl, that when run from the source code root, will scan all .c files to match the following pattern: label: if (condition) goto label; On finding such a pattern the script will print the file name and the line number. There are certain cases where the above recursive pattern is intended. Hence adding those labels to ignore-labels. Thanks Vijaikumar Mallikarjuna for the perl script. Also fixed all such existing errors Change-Id: I1b821d0a8c296f16e40faff20bd029bdc880c2e9 BUG: 1119256 Signed-off-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/8307 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* Changing the position of nfs-ganesha.logMeghana Madhusudhan2014-07-091-1/+8
| | | | | | | | | | | | | | | Changing the position of ganesha.log from /tmp/ganesha.log to /var/log/nfs-ganesha/ganesha.nfsd.log Change-Id: Iff95fbc7fc690f4fdbc1789d84f3e41aaca9045b BUG: 1116723 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/8249 Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* porting: Port for FreeBSD rebased from Mike Ma's effortsHarshavardhana2014-07-023-5/+29
| | | | | | | | | | | | | | | | | | | - Provides a working Gluster Management Daemon, CLI - Provides a working GlusterFS server, GlusterNFS server - Provides a working GlusterFS client - execinfo port from FreeBSD is moved into ./contrib/libexecinfo for ease of portability on NetBSD. (FreeBSD 10 and OSX provide execinfo natively) - More portability cleanups for Darwin, FreeBSD and NetBSD - Provides a new rc script for FreeBSD Change-Id: I8dff336f97479ca5a7f9b8c6b730051c0f8ac46f BUG: 1111774 Original-Author: Mike Ma <mikemandarine@gmail.com> Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8141 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* extras: add a script to stop all the glusterfs processAmar Tumballi2014-06-171-0/+33
| | | | | | | | | Change-Id: I9f73bf0308625695ed78db06478963d16644852a Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.org/6270 Reviewed-by: Sachidananda Urs <sacchi@gmail.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* extras: bash command completion for glusterVarun Shastry2014-06-134-2/+507
| | | | | | | | | | Change-Id: Ifd6e68b0288dc65e41e467b4ad02bfc3bded341f BUG: 1108767 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/7979 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Core: Fix issues reported by CppcheckLalatendu Mohanty2014-06-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed in this patch: [glusterfs/extras/geo-rep/gsync-sync-gfid.c:105]: (error) Resource leak: fp [glusterfs/libglusterfs/src/xlator.c:651]: (error) Uninitialized variable: gfid [glusterfs/libglusterfs/src/xlator.c:652]: (error) Uninitialized variable: gfid [glusterfs/xlators/cluster/ha/src/ha.c:2699]: (error) Possible null pointer dereference: priv [glusterfs/xlators/features/changelog/src/changelog.c:1464]: (error) Possible null pointer dereference: priv [glusterfs/xlators/mgmt/glusterd/src/glusterd-mgmt-handler.c:865]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-mgmt-handler.c:194]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-syncop.c:1408]: (error) Possible null pointer dereference: this [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:7002]: (error) Possible null pointer dereference: path_tokens Fixed in 3.4 and 3.5 branch (http://review.gluster.org/#/c/7583/ , http://review.gluster.org/#/c/7605/ will be backported in a separate patch) [glusterfs/xlators/mount/fuse/src/fuse-bridge.c:4688]: (error) Uninitialized variable: finh [glusterfs/xlators/mount/fuse/src/fuse-bridge.c:3081]: (error) Possible null pointer dereference: state [glusterfs/xlators/cluster/dht/src/dht-rebalance.c:1719]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/cluster/stripe/src/stripe.c:4940]: (error) Possible null pointer dereference: local [glusterfs/xlators/mgmt/glusterd/src/glusterd-replace-brick.c:915]: (error) Resource leak: file [glusterfs/xlators/mgmt/glusterd/src/glusterd-replace-brick.c:999]: (error) Resource leak: file [glusterfs/xlators/mgmt/glusterd/src/glusterd-sm.c:248]: (error) Possible null pointer dereference: new_ev_ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:5297]: (error) Possible null pointer dereference: this [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:6273]: (error) Possible null pointer dereference: this [glusterfs/xlators/performance/quick-read/src/quick-read.c:586]: (error) Possible null pointer dereference: iobuf [glusterfs/xlators/nfs/server/src/nfs-common.c:89]: (error) Dangerous usage of 'volname' (strncpy doesn't always null-terminate it). False positives [glusterfs/geo-replication/src/gsyncd.c:99]: (error) Memory leak: str [glusterfs/geo-replication/src/gsyncd.c:395]: (error) Memory leak: argv [glusterfs/xlators/nfs/server/src/nlm4.c:1199]: (error) Possible null pointer dereference: fde [glusterfs/xlators/mgmt/glusterd/src/glusterd-geo-rep.c:1659]: (error) Possible null pointer dereference: command [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:7001]: (error) Possible null pointer dereference: path_tokens Insignificant/Don't care [glusterfs/contrib/uuid/gen_uuid.c:369]: (warning) %ld in format string (no. 2) requires 'long *' but the argument type is 'unsigned long *'. [glusterfs/contrib/uuid/gen_uuid.c:369]: (warning) %ld in format string (no. 3) requires 'long *' but the argument type is 'unsigned long *'. [glusterfs/extras/test/test-ffop.c:27]: (error) Buffer overrun possible for long command line arguments. [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:138]: (error) Possible null pointer dereference: __ptr [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:140]: (error) Possible null pointer dereference: __ptr [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:331]: (error) Possible null pointer dereference: __ptr Change-Id: I7696ed1a2a9553b79f9714e10210a8d563a5abd8 BUG: 1091677 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/7693 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* extras/hookscripts: When set option disables smb, don't start smb.Raghavendra Talur2014-06-121-1/+1
| | | | | | | | | | | | | | When user.smb or user.cifs option is set to disable, we remove the share options from smb.conf. If smb process is running, a sighup is required but we should not start the process if its not running. Change-Id: I1e2163ff209ba858380f7da459ff1dba3cf673f2 BUG: 1105123 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/7994 Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* scripts: CTDB lockvol ping-timeout should be 10secsHarshavardhana2014-06-112-30/+32
| | | | | | | | | | | | | | | commit "4044e387dd40e2d12145fd32d5fd715406fcec8e" approach to this led to deadlocks instead we rely on an old trick at client side - without any need to modifying the volume globally. Change-Id: I6e3c6bf9c0a3a0dd99a51b5d2a6c1f050ed2384c BUG: 1091600 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8007 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Hooks/nfs-ganesha:Change the hook script to enable new function signature of ↵Meghana M2014-06-021-54/+56
| | | | | | | | | | | | | | | | | | | | add export. Minor changes in the hook script to avoid some possible confusion when volume set options are used. Adding a few additional checks to ensure correct behaviour. Edited a few config parameters that have changed in upstream ganesha recently. Change-Id: I85b842cbbd4b35b7f72f3beb60abf6532ddaa8c7 BUG: 1101416 Signed-off-by: Meghana M <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/7890 Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/geo-rep: Use getent passwd instead of $HOMEAvra Sengupta2014-05-201-2/+1
| | | | | | | | | | | | | | | | $HOME might not be set in the env variables, as is the case when these scripts are executed using the runner framework. Hence using getent passwd instead of $HOME Change-Id: I99f6bcd788d727be534b3040600d66c8dbb7ee92 BUG: 1099041 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7803 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* NetBSD build fixesEmmanuel Dreyfus2014-05-172-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Shell scripts: == is specific to bash and ksh. Use = instead. - Shell scripts: use sh instead of bash if bash functionnality is not used - Shell scripts: ${var/search/replace} is specific to bash - sed: The -i option is specific to GNU sed. - Makefiles: $< outside of generic rules only work in GNU make. - xdrproc_t() is not universally defined as variadic. Do not specify third argument if it is not used - NetBSD FUSE specific: only include <perfuse.h> in FUSE client code, it harms in other locations - configure: Search for gettext() in libintl as NetBSD stores it there - Like MacOS X, NetBSD has unmount(2) and not umount(2) (un vs u) Some other build issues previously included in this change were removed: - __THROW macro, addressed in http://review.gluster.com/#/c/7757/ - getmntent() compat shared with MacOS X, in http://review.gluster.com/#/c/7722/ This patchset adds warning fixes for mount_glusterfs BUG: 764655 Change-Id: I2f1faf8ff96362d3e2baf237b943df619011f1f4 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/7783 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* Hooks:Modified S31ganesha-set.sh to enable dynamic exports via NFS-ganeshaMeghana2014-05-162-61/+88
| | | | | | | | | | | | | | | | | | | | | | Dbus signals have to be sent to add and remove exports on the fly, without restarting nfs-ganesha server. Adding those signals in the hook script to enable the same. Adding another to check to enable IP modification, without restarting nfs-ganesha.Adding checks to find the configuration file in /etc/glusterfs-ganesha. Removing nested volume set options. This introduces some issues that will be documented clearly. Signed-off-by: Meghana <mmadhusu@redhat.com> Change-Id: I28f7983f2d18529dc813ddc9773b33c6caee1ad4 BUG: 1095656 Signed-off-by: Meghana <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/7709 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/geo-rep: Allow gverify.sh and S56glusterd-geo-rep-create-post.shAvra Sengupta2014-05-141-7/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to operate for non-root privileged slave volume Mounting the slave-volume on local node, to perform disk checks in order to allow gverify.sh to operate for non-root privileged slave volume Allowing the hook script S56glusterd-geo-rep-create-post.sh to operate for non-root privileged slave volume Modified peer_add_secret_pub.in to accept username as argument and add the pem keys to the users's_home_dir/.ssh/authorized_keys Wrote set_geo_rep_pem_keys.sh which accepts username as argument and copies the pem keys from the user's home directory to $GLUSTERD_WORKING_DIR/geo-replication/ and then copies the keys to other nodes in the cluster and add them to the respective authorized keys. The script takes as argument the user name and assumes that the user will be present in all the nodes in the cluster. It is not needed for root. To summarize: For a privileged slave user, execute the following on master node as super user: gluster system:: execute gsec_create gluster volume geo-replication <master_vol> [root@]<slave_ip>::<slave_vol> create push_pem For a non-privileged slave user execute the following on master node as super user: gluster system:: execute gsec_create gluster volume geo-replication <master_vol> <slave_user>@<slave_ip>::<slave_vol> create push_pem then on the slave node execute the following as super user: /usr/local/libexec/glusterfs/set_geo_rep_pem_keys.sh <slave_user> BUG: 1077452 Change-Id: I88020968aa5b13a2c2ab86b1d6661b60071f6f5e Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7744 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* cli/hooks : Add volume set options to enable/disable nfs-ganesha support.Meghana M2014-05-037-2/+291
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. gluster volume set nfs-ganesha.enable ON/OFF If the option is set to ON, the volume field in the nfs-ganesha configuartion file is edited. Gluster-nfs is disabled on that volume and the volume is exported using nfs-ganesha. 2.gluster volume set nfs-ganesha.host IP This is used to provide the IP of the nfs-ganesha host. Note : nfs-ganesha.host MUST be set before using nfs-ganesha.enable ON The switch from gluster-nfs to nfs-ganesha is mostly done by the hook-scripts in the post phase of the 'set' option. As a result, gluster volume reset does not function as it is expected to. By default, nfs-ganesha will be set to off but the process will not be killed. Hence, a few changes have to be made post 'reset' option as well. Those changes also have been added. Change-Id: I7fdc14ee49d1724af96eda33c6a3ec08b1020788 BUG: 1092283 Signed-off-by: Meghana <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/7321 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* extras/hookscripts: Remove %P from smb share path value.Raghavendra Talur2014-05-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | We had added %P in the value for path in smb share definitions to avoid ctdb errors. However, %P does not work well for windows clients and they fail to access the share. Solution for the original problem: The error messages were being generated by a monitoring script that ctdb runs. The script reads the path value from testparm and tests if it exists in the local machine. This particular check does not hold valid for virtual file system backends like gluster. There is no harm in asking ctdb to not to check the existence of such backend and can be done by setting the following config in ctdb.conf: CTDB_SAMBA_SKIP_SHARE_CHECK=YES. Change-Id: I91627c8a279126a5cc24c6347847f9bfbad53dd5 BUG: 1068776 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/7598 Reviewed-by: Jose A. Rivera <jarrpa@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* scripts: CTDB lockvol ping-timeout should be 10secsHarshavardhana2014-05-021-0/+9
| | | | | | | | | | | | | | | Users often forget to update the ping-timeout, perhaps we should take care of this automatically Change-Id: I6d14df8aa52665847233cb1760dfd54f41baadec BUG: 1091600 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7569 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jose A. Rivera <jarrpa@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Ping timer implmentationKrishnan Parthasarathi2014-04-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch refactors the existing client ping timer implementation, and makes use of the common code for implementing both client ping timer and the glusterd ping timer. A new gluster rpc program for ping is introduced. The ping timer is only started for peers that have this new program. The deafult glusterd ping timeout is 30 seconds. It is configurable by setting the option 'ping-timeout' in glusterd.vol . Also, this patch introduces changes in the glusterd-handshake path. The client programs for a peer are now set in the callback of dump_versions, for both the older handshake and the newer op-version handshake. This is the only place in the handshake process where we know what programs a peer supports. Change-Id: I035815ac13449ca47080ecc3253c0a9afbe9016a BUG: 1038261 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5202 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Update references to the maillinglist to gluster-devel@gluster.orgNiels de Vos2014-04-271-2/+2
| | | | | | | | | | | | | | gluster-devel@nongnu.org has moved to gluster-devel@gluster.org. All occurrences in the current (non legacy) documentation and code have been adjusted. Change-Id: I053162e633f7ea14fd3eed239ded017df165147c BUG: 1091705 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7573 Reviewed-by: Justin Clift <justin@gluster.org> Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* rpcgen: Remove autogenerated files instead build on demandHarshavardhana2014-04-251-98/+0
| | | | | | | | | | | | | Avoid modifying autogenerated files and keeping them in repository - autogenerate them on demand from ".x" files Change-Id: I2cdb1fe9b99768ceb80a8cb100fa00bd1d8fe2c6 BUG: 1090807 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7526 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-241-0/+1
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Add upgrade scripts for quotaKrutika Dhananjay2014-04-173-1/+87
| | | | | | | | | Change-Id: I289662300d32f75e2fc6e789037c3224054a38a5 BUG: 969461 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7418 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* scripts: Use `/bin/bash` not `/bin/sh`Harshavardhana2014-04-171-1/+1
| | | | | | | | | | | | | | | | | If using `/bin/sh` this is what we see $ ./who-wrote-glusterfs.sh ./who-wrote-glusterfs.sh: 39: shift: can't shift that many Use `/bin/bash` instead where 'shift' without an argument is supported. Change-Id: I2be05f0062eb8456631c1cee859757052f1b6dc7 BUG: 1087771 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7496 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* scripts: add new email aliasesNiels de Vos2014-04-162-0/+3
| | | | | | | | | | | | | Two developers started to use new email addresses, marking them as aliases. Also assign @gmail.com addresses to the "(unknown)" employer. Change-Id: Ic5722c1611b003182c0288ba530d6ab275c2ca1b BUG: 1087771 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7484 Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* build: set run levels for glusterd init script properlyBala.FA2014-04-121-2/+2
| | | | | | | | | | | | 'chkconfig --add glusterd' does not set run levels for start/stop. This patch fixes it. Change-Id: I8962f5207d034b6875353e15eb60c4d08c5a4fe4 BUG: 1086141 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/7432 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Made spelling changes to 19 filesAkshataDM2014-03-161-1/+1
| | | | | | | | | | Change-Id: If91cf44578fe0b5176ea01ae5c5962e31606f640 BUG: 1075417 Signed-off-by: AkshataDM <oxta28@gmail.com> Reviewed-on: http://review.gluster.org/7280 Reviewed-by: Varun Shastry <vshastry@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* scripts: CTDB hooks should add `_netdev` for network mountsHarshavardhana2014-03-112-2/+2
| | | | | | | | | | | Change-Id: I86ad5e9ed291866a8d478768fb447e269f51c39e BUG: 1075182 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7221 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jose A. Rivera <jarrpa@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* hook-scripts: Move smb hooks to right place.Raghavendra Talur2014-03-1012-23/+137
| | | | | | | | | | | | | | Moved the hook-scripts to dirs corresponding to event. Also, edited S30samba-set.sh to with changes in other two hook scripts to bring uniformity. Change-Id: Ib98c0a18d4bb5d0ba4b881b2e19b40d72580b1c2 BUG: 1073468 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/7201 Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Bala FA <barumuga@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: Add missing rpmbuild/BUILD dir for CentOS 5.xJustin Clift2014-03-011-0/+1
| | | | | | | | | | | | | The rpmbuild/BUILD directory isn't created automatically by the build system on CentOS 5.x. This 1-line patch adds its creation to the build process. BUG: 1071504 Change-Id: I90ad70608776cb491f2ba92fb7d6044cff4defcc Signed-off-by: Justin Clift <justin@gluster.org> Reviewed-on: http://review.gluster.org/7175 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
generated by cgit (git 2.34.1) at 2024-11-18 16:19:04 +0000