summaryrefslogtreecommitdiffstats
path: root/extras
Commit message (Collapse)AuthorAgeFilesLines
* cli/hooks : Add volume set options to enable/disable nfs-ganesha support.Meghana M2014-05-037-2/+291
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. gluster volume set nfs-ganesha.enable ON/OFF If the option is set to ON, the volume field in the nfs-ganesha configuartion file is edited. Gluster-nfs is disabled on that volume and the volume is exported using nfs-ganesha. 2.gluster volume set nfs-ganesha.host IP This is used to provide the IP of the nfs-ganesha host. Note : nfs-ganesha.host MUST be set before using nfs-ganesha.enable ON The switch from gluster-nfs to nfs-ganesha is mostly done by the hook-scripts in the post phase of the 'set' option. As a result, gluster volume reset does not function as it is expected to. By default, nfs-ganesha will be set to off but the process will not be killed. Hence, a few changes have to be made post 'reset' option as well. Those changes also have been added. Change-Id: I7fdc14ee49d1724af96eda33c6a3ec08b1020788 BUG: 1092283 Signed-off-by: Meghana <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/7321 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* extras/hookscripts: Remove %P from smb share path value.Raghavendra Talur2014-05-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | We had added %P in the value for path in smb share definitions to avoid ctdb errors. However, %P does not work well for windows clients and they fail to access the share. Solution for the original problem: The error messages were being generated by a monitoring script that ctdb runs. The script reads the path value from testparm and tests if it exists in the local machine. This particular check does not hold valid for virtual file system backends like gluster. There is no harm in asking ctdb to not to check the existence of such backend and can be done by setting the following config in ctdb.conf: CTDB_SAMBA_SKIP_SHARE_CHECK=YES. Change-Id: I91627c8a279126a5cc24c6347847f9bfbad53dd5 BUG: 1068776 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/7598 Reviewed-by: Jose A. Rivera <jarrpa@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* scripts: CTDB lockvol ping-timeout should be 10secsHarshavardhana2014-05-021-0/+9
| | | | | | | | | | | | | | | Users often forget to update the ping-timeout, perhaps we should take care of this automatically Change-Id: I6d14df8aa52665847233cb1760dfd54f41baadec BUG: 1091600 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7569 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jose A. Rivera <jarrpa@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Ping timer implmentationKrishnan Parthasarathi2014-04-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch refactors the existing client ping timer implementation, and makes use of the common code for implementing both client ping timer and the glusterd ping timer. A new gluster rpc program for ping is introduced. The ping timer is only started for peers that have this new program. The deafult glusterd ping timeout is 30 seconds. It is configurable by setting the option 'ping-timeout' in glusterd.vol . Also, this patch introduces changes in the glusterd-handshake path. The client programs for a peer are now set in the callback of dump_versions, for both the older handshake and the newer op-version handshake. This is the only place in the handshake process where we know what programs a peer supports. Change-Id: I035815ac13449ca47080ecc3253c0a9afbe9016a BUG: 1038261 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5202 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Update references to the maillinglist to gluster-devel@gluster.orgNiels de Vos2014-04-271-2/+2
| | | | | | | | | | | | | | gluster-devel@nongnu.org has moved to gluster-devel@gluster.org. All occurrences in the current (non legacy) documentation and code have been adjusted. Change-Id: I053162e633f7ea14fd3eed239ded017df165147c BUG: 1091705 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7573 Reviewed-by: Justin Clift <justin@gluster.org> Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* rpcgen: Remove autogenerated files instead build on demandHarshavardhana2014-04-251-98/+0
| | | | | | | | | | | | | Avoid modifying autogenerated files and keeping them in repository - autogenerate them on demand from ".x" files Change-Id: I2cdb1fe9b99768ceb80a8cb100fa00bd1d8fe2c6 BUG: 1090807 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7526 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-241-0/+1
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Add upgrade scripts for quotaKrutika Dhananjay2014-04-173-1/+87
| | | | | | | | | Change-Id: I289662300d32f75e2fc6e789037c3224054a38a5 BUG: 969461 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7418 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* scripts: Use `/bin/bash` not `/bin/sh`Harshavardhana2014-04-171-1/+1
| | | | | | | | | | | | | | | | | If using `/bin/sh` this is what we see $ ./who-wrote-glusterfs.sh ./who-wrote-glusterfs.sh: 39: shift: can't shift that many Use `/bin/bash` instead where 'shift' without an argument is supported. Change-Id: I2be05f0062eb8456631c1cee859757052f1b6dc7 BUG: 1087771 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7496 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* scripts: add new email aliasesNiels de Vos2014-04-162-0/+3
| | | | | | | | | | | | | Two developers started to use new email addresses, marking them as aliases. Also assign @gmail.com addresses to the "(unknown)" employer. Change-Id: Ic5722c1611b003182c0288ba530d6ab275c2ca1b BUG: 1087771 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7484 Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* build: set run levels for glusterd init script properlyBala.FA2014-04-121-2/+2
| | | | | | | | | | | | 'chkconfig --add glusterd' does not set run levels for start/stop. This patch fixes it. Change-Id: I8962f5207d034b6875353e15eb60c4d08c5a4fe4 BUG: 1086141 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/7432 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Made spelling changes to 19 filesAkshataDM2014-03-161-1/+1
| | | | | | | | | | Change-Id: If91cf44578fe0b5176ea01ae5c5962e31606f640 BUG: 1075417 Signed-off-by: AkshataDM <oxta28@gmail.com> Reviewed-on: http://review.gluster.org/7280 Reviewed-by: Varun Shastry <vshastry@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* scripts: CTDB hooks should add `_netdev` for network mountsHarshavardhana2014-03-112-2/+2
| | | | | | | | | | | Change-Id: I86ad5e9ed291866a8d478768fb447e269f51c39e BUG: 1075182 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7221 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jose A. Rivera <jarrpa@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* hook-scripts: Move smb hooks to right place.Raghavendra Talur2014-03-1012-23/+137
| | | | | | | | | | | | | | Moved the hook-scripts to dirs corresponding to event. Also, edited S30samba-set.sh to with changes in other two hook scripts to bring uniformity. Change-Id: Ib98c0a18d4bb5d0ba4b881b2e19b40d72580b1c2 BUG: 1073468 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/7201 Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Bala FA <barumuga@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: Add missing rpmbuild/BUILD dir for CentOS 5.xJustin Clift2014-03-011-0/+1
| | | | | | | | | | | | | The rpmbuild/BUILD directory isn't created automatically by the build system on CentOS 5.x. This 1-line patch adds its creation to the build process. BUG: 1071504 Change-Id: I90ad70608776cb491f2ba92fb7d6044cff4defcc Signed-off-by: Justin Clift <justin@gluster.org> Reviewed-on: http://review.gluster.org/7175 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* extras/hookscripts: Add `%P` as default relative rootHarshavardhana2014-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ctdb in its monitoring script looks for the "path" variable values at the system level not at share level. This relative root path, if any should be default for all volumes, to avoid issues with ctdb when doing subdirectory shares. Error: 2014/02/21 12:50:34.355754 [41083]: ERROR: samba directory "/foodir" not available Fix: Add %P in your smb.conf [gluster-foodir] ... ... path = %P/foodir ... ... Change-Id: If3c110d844ba8301c901dbce40b23cac99d6d55b BUG: 1068776 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7147 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jose A. Rivera <jarrpa@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Use libglusterfs wrapper to make setxattr portableEmmanuel Dreyfus2014-02-131-3/+4
| | | | | | | | | BUG: 764655 Change-Id: I332922521bef5684f18d5f7b226cb36d5303ae47 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6982 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* spec: geo-rep: Include hooks and upgrade scriptsAravinda VK2014-02-101-0/+9
| | | | | | | | | | | | | | Added hook script S56glusterd-geo-rep-create-post.sh to %{_sharedstatedir}/glusterd/hooks/1/gsync-create/post/ and upgrade scripts added to %{_datadir}/glusterfs/scripts/ BUG: 1036539 Change-Id: Id114b827824e55516181ab8f564d419c258be3e2 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/6926 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: Add rpc coverage tests.Vijay Bellur2014-01-271-480/+0
| | | | | | | | | | | | | 1. Moves rpc-coverage.sh from extras/ to tests/basic/ 2. Fixes a symlink test Change-Id: I2fb8f8441434acfd7bd7fff72deedfbd2410d08c BUG: 764966 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6609 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* build: Install /var/lib/glusterd/groups/virt by defaultNiels de Vos2014-01-211-7/+10
| | | | | | | | | | | | | | | | /var/lib/glusterd/groups/virt is not installed by default, but that should be the case. It is provided as extras/groups-virt.example. "make install" should correctly install this file, and the rpm packages should include it. Change-Id: I5284306cfc2882e3147bd72f496ad29db906fcb2 BUG: 1053854 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6717 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: Make grep search more accuratelyVarun Shastry2014-01-161-2/+2
| | | | | | | | | | | | | | The hook script was searching the info file for "features.quota" to know the quota status (enable/disabled). When features.quota-deem-statfs the grep is not accurate. Fixed this issue. Change-Id: I4104a93c1c1e0ac9fd7ef7bfef993425ab50e651 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6380 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: Metadata cleanupVarun Shastry2014-01-163-54/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quota and marker uses 'trusted.glusterfs.quota*' and 'trusted.pgfid*' xattrs to store its configurations and accounting information and also to build the parent inode chain in case of absense of path. Problem: After disabling and then enabling quota back, the xattrs may contain stale data leading to impaired accounting and thus improper enforcement. Solution: Clean up all the quota related xattrs after quota disable. Marker xlator implements a virtual xattr to cleanup quota and pgfid xattrs. In this approach glusterd mounts an auxiliary mount and sends the below command to all the files by crawling the mountpoint. #setfattr -n "glusterfs.quota-xattr-cleanup" -v 1 <path/to/file> Credit: Krishnan Parthasarathi <kparthas@redhat.com> Varun Shastry <vshastry@redhat.com> Change-Id: I9380eca58a285dc27dd572de1767aac8f2cd8049 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6369 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Updating extras/Ubuntu with latest upstart configs (BUG: 1047007)Louis Zuckerman2013-12-293-9/+10
| | | | | | | | | Change-Id: Ia769589f6af1d7ca3577185fd4c56eb9f43b3e2e BUG: 1047007 Signed-off-by: Louis Zuckerman <me@louiszuckerman.com> Reviewed-on: http://review.gluster.org/6611 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/geo-rep: more glusterd and cli fixes for geo-rep.Ajeet Jha2013-12-121-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | -> handle option validation cases in reset case. -> Creating valid conf path when glusterd restarts. -> Reading the gsyncd worker thread status and displaying it. -> Displaying status-detail per worker. -> Fetch checkpoint info in geo-rep status. -> use-tarssh value validation added. misc: misc geo-rep fixes based on cluster, logrotate etc.. -> cluster/dht: fix 'stime' getxattr getting overwritten. -> cluster/afr: return max of 'stime' values in subvol. -> geo-rep-logrotate: Sending SIGHUP to geo-rep auxiliary. -> cluster/dht: fix convoluted logic while aggregating. -> cluster/*: fix 'stime' min/max fetch logic. Change-Id: I811acea0bbd6194797a3e55d89295d1ea021ac85 BUG: 1036552 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/6405 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: FedoraSCM sources are not longer needed to build RPMsKaleb S. KEITHLEY2013-12-061-12/+2
| | | | | | | | | | | Also some updates to .gitignore Change-Id: I576af453ca7d1ec1f3db21ee4d8386927988e7db BUG: 950083 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/6458 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/quota: Add the quota config xattr to newly added brickVarun Shastry2013-11-266-0/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: Quota directory limit configuration is stored in the xattrs. When a new brick is added these 'limit-set' xattrs have to be created to the directory in the new brick. This is done by the dht directory healing when the directory is created in the new brick. Since 'root' directory is already created DHT doesn't heal the limit-set xattr root. Solution: When the add-brick command is issued run the below hook script to heal the 'limit-set' xattr. The hook script does the following only if limit is configured on root. 1. Create an auxiliary mount. 2. getxattr 'limit-set' on the root 3. setxattr the same value on the root But this script needs the volume to be started to make the auxiliary mount. To handle the case when the add-brick is issued when the volume was stopped, symlink is created by the 'master' script to the corresponding location and these two are by default disabled. So, a 'master' script is added in the add-brick/pre. When add-brick command is issued, it enables one of the scripts mentioned above based on the condition, if volume is started - enable add-brick/post script else - enable start/post script After the actual script completes its job, it disables itself. Note: The enabling and disabling of the script is based on the glusterd's logic, that it only runs the scripts which starts its name with 'S'. So, Enable - symlink the file to 'S'* Disable - unlink the symlink. Change-Id: I2d3947a4d686c54417ec95f530af3bdd3444f4e2 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6104 Reviewed-by: Brian Foster <bfoster@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* group-virt: To minimize 'split-brain' enable quorum under virt profileHarshavardhana2013-11-221-0/+2
| | | | | | | | | | | | | | | | | | Quorum as default is necessary when storing virtual machine images. It would be necessary to enable both server and client quorum Currently defaulted values are: ---------------- server-quorum-type=server quorum-type=auto ---------------- Change-Id: Ic2adb5856ce3c2589476e872e988cae6eeb9b25e BUG: 1032080 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6340 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* mgmt/glusterd: add option to specify a different base-portKaleb S. KEITHLEY2013-10-311-0/+1
| | | | | | | | | | | | | | | | | | This is (arguably) a hack to work around a bug in libvirt which is not well behaved wrt to using TCP ports in the unreserved space between 49152-65535. (See RFC 6335) Normally glusterd starts and binds to the first available port in range, usually 49152. libvirt's live migration also tries to use ports in this range, but has no fallback to use (an)other port(s) when the one it wants is already in use. Change-Id: Id8fe35c08b6ce4f268d46804bbb6dddab7a6b7bb BUG: 1018178 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/6210 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras/hook-scripts: Enable per client logging for gluster shares served by ↵Poornima2013-10-222-2/+2
| | | | | | | | | | | | | | SAMBA Edited hook scrips to add a variable in the option 'log file', which will be substituted for client IP. Change-Id: I50f143bb3114eb00afab2e1237d749804c885ca6 BUG: 1020848 Signed-off-by: Poornima <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/6109 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: disable logging framework on rhel6Bala.FA2013-10-181-4/+7
| | | | | | | | | | | | As rsyslog-mmcount is not yet available in rhel6 variant, this patch disables logging framework on rhel6 and its dependency BUG: 1018308 Change-Id: I6b7c04640f8d38055e00c697d1017c7a530463d0 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6108 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* extras/hookscripts: Fix the multiple entries in smb.conf problem.Raghavendra Talur2013-10-083-12/+10
| | | | | | | | | | | | | | | | | | | | | Problem: 1. Force starts and user.smb sets were adding multiple entries to the smb.conf file for the same volume. Make a check for the entry and search with exact name. 2. Again, while deleting the share name from smb.conf search with exact name so that volumes with names which are substrings of ones to be deleted don't get deleted. 3. We don't need to use a tmp file while using sed -i, fixed that. Change-Id: Ie0f7c9d4790ef9a177a043378a761c9ffe1628e5 BUG: 994727 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/6043 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Lalatendu Mohanty <lmohanty@redhat.com>
* hookscripts: Changes in hook scripts to make it work on all Linux/GNU ↵Lalatendu Mohanty2013-10-042-7/+37
| | | | | | | | | | | | | | | | | | distribution Removed the hard coded values for smb.conf, smb logfile location and smbd.pid. The current hook scripts also work for manully compiled (make, make install) instance of gluster and Samba. But we have to manually copy the hook scripts to respective locations. Change-Id: I14056830fcd2ecb48b3c4df89265f4408c8de3e3 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/5947 Reviewed-by: poornima g <pgurusid@redhat.com> Reviewed-by: susant palai <spalai@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* geo-rep: logrotate: Logrotate handlingAravinda VK2013-10-032-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In existing georep logrotate was implemented by handling SIGSTOP and SIGCONT, gsyncd was failing to start again after SIGSTOP. New approach uses WatchedFileHandler in logging, which tracks the log file changes or logrotate. Reopens the log file if logrotate is triggered or if same log file is updated from other process. As per python doc: http://docs.python.org/2/library/logging.handlers.html: The WatchedFileHandler class, located in the logging.handlers module, is a FileHandler which watches the file it is logging to. If the file changes, it is closed and reopened using the file name. A file change can happen because of usage of programs such as newsyslog and logrotate which perform log file rotation. This handler, intended for use under Unix/Linux, watches the file to see if it has changed since the last emit. (A file is deemed to have changed if its device or inode have changed.) If the file has changed, the old file stream is closed, and the file opened to get a new stream. Change-Id: I30f65eb1e9778b12943d6e43b60a50344a7885c6 BUG: 1012776 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/5968 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras: add script and config for generating "Who wrote GlusterFS"Niels de Vos2013-09-294-0/+121
| | | | | | | | | | | | | | | | | | | | | | This script and configuration can be used to generate statistics similar to the "Who wrote <linux-version>" series available on http://lwn.net. Example usage for statistics from the initial branchpoint of 3.4 to the current development of the release-3.4 branch: $ extras/who-wrote-glusterfs/who-wrote-glusterfs.sh \ v3.4.0alpha...origin/release-3.4 By default the statistics will be calculated over the currently checked out branch. Change-Id: Ie7b8b655c50dcb14257e42599e2f89642c8b5b42 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5912 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd.service (systemd), ensure glusterd starts before local mountsKaleb S. KEITHLEY2013-09-201-0/+1
| | | | | | | | | | | | | | | | | | | | | NOTICE: this patch was accepted onto the release-3.4 branch for 3.4.1, but this same patch for master is languishing here in review. Try (emphasis on the try) to ensure that glusterd starts, and in turn starts glusterfsd before init attempt to mount any gluster (or gluster NFS) volumes in /etc/fstab. N.B. Joe Julian says this doesn't fix the problem for him, although it worked for me in kvm. Lennart Poettering says it should, and we should file a BZ against systemd if it doesn't. See https://lists.fedoraproject.org/pipermail/devel/2013-July/185870.html Change-Id: I4d8061217d8301beb0da485dc63a1984a7c57c37 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 1004795 Reviewed-on: http://review.gluster.org/5823 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Fix typo in systemd service definition fileJustin Clift2013-09-201-1/+1
| | | | | | | | | Change-Id: Ia9dac04ad508fbaafbed24b2137b09872a1ca53c BUG: 1010352 Signed-off-by: Justin Clift <jclift@redhat.com> Reviewed-on: http://review.gluster.org/5981 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* glusterd/gverify.sh: Stops session being created with invalid slave detailsVenky Shankar2013-09-041-2/+3
| | | | | | | | | | | | | create force will fail with proper message, if the ip is not reachable, or is unable to fetch slave details. Change-Id: I44a3ba777b37702ffd0e48e9cb46c51e293327d4 BUG: 988314 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/5516 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* doc: Move glusterd.vol to extras/ directoryLubomir Rintel2013-08-222-1/+12
| | | | | | | | | | It's actually not documentation. Change-Id: I30c84abc9a31edb2f849dd2d6ff6d3129d87392d Signed-off-by: Lubomir Rintel <lubo.rintel@gooddata.com> Reviewed-on: http://review.gluster.org/5474 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras/hookscripts: Add default logfile for glusterfs vfs plugin.Raghavendra Talur2013-08-222-0/+4
| | | | | | | | | | | | | | | Glusterfs vfs plugin for samba makes call into gfapi which brings up complete client process stack of gluster. Not having default log file means not logging client process at all. This patch adds default logfile and loglevel for vfs plugin. Change-Id: Ie0fb6bbb445d6f3349fc35c713743094c0f08915 BUG: 999910 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/5685 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* log: add logger.conf.example fileBala.FA2013-08-142-2/+13
| | | | | | | | | | | | This example file can be safely renamed as logger.conf to enable syslog logging Change-Id: If49dd6002a046915b2eca330b7a539f4fa1f94fa BUG: 928648 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/5622 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* log: add comments to rsyslog gluster configuration fileBala.FA2013-08-142-1/+71
| | | | | | | | | | | | Comments are added to rsyslog gluster configuration files to give clear meanings and example email alerting. Change-Id: I23577dc3b39bca89696c46ab6252dc5673d0803f BUG: 928648 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/5621 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* log: add rsyslog gluster configuration fileBala.FA2013-08-133-2/+60
| | | | | | | | | | | | | This patch comes with rsyslog gluster configuration file for fedora and rhel >= 6. It disables syslog at rpm build time if targetted platform is rhel < 6 as there is no rsyslog support. Change-Id: I95c076874b6891ff08dee1b35980f95529fb0f37 BUG: 928648 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/5543 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* extras/hook-scripts: Don't add multiple entries in smb.confRaghavendra Talur2013-08-071-2/+4
| | | | | | | | | | | | When volume is force started, there may be entry in smb.conf for that volume. Always check for entry before adding one. Change-Id: I44f893174a993abaa31c24c1a81bb38a58617808 BUG: 994727 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/5526 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* glusterd/cli changes for distributed geo-repAvra Sengupta2013-07-262-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commands: gluster system:: execute gsec_create gluster volume geo-rep <master> <slave-url> create [push-pem] [force] gluster volume geo-rep <master> <slave-url> start [force] gluster volume geo-rep <master> <slave-url> stop [force] gluster volume geo-rep <master> <slave-url> delete gluster volume geo-rep <master> <slave-url> config gluster volume geo-rep <master> <slave-url> status The geo-replication is distributed. The session will be created, and gsyncd will be spawned on all relevant nodes, instead of only one node. geo-rep: Collecting status detail related data Added persistent store for saving information about TotalFilesSynced, TotalSyncTime, TotalBytesSynced Changes in the status information in socket: Existing(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01; New(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01;SyncTime=0.69978; TotalSyncTime=2.890044;TotalFilesSynced=6;TotalBytesSynced=143640; Persistent details stored in /var/lib/glusterd/geo-replication/${mastervol}/${eSlave}-detail.status Change-Id: I1db7fc13ffca2e415c05200b0109b1254067f111 BUG: 847839 Original Author: Avra Sengupta <asengupt@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Csaba Henk <csaba@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5132 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* gsyncd: distribute the crawling loadAvra Sengupta2013-07-268-2/+395
| | | | | | | | | | | | | | | | | | | * also consume changelog for change detection. * Status fixes * Use new libgfchangelog done API * process (and sync) one changelog at a time Change-Id: I24891615bb762e0741b1819ddfdef8802326cb16 BUG: 847839 Original Author: Csaba Henk <csaba@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5131 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* test-ffop: the result of (O_TRUNC|O_RDONLY) is unspecifiedNiels de Vos2013-07-101-0/+2
| | | | | | | | | | | | | | | | | | On RHEL-6 an open(.., O_TRUNC|O_RDONLY) fails. test-ffop expects this to succeed, but the behaviour is unspecified according to 'man 2 open': O_TRUNC If the file already exists and is a regular file and the open mode allows writing (i.e., is O_RDWR or O_WRONLY) it will be truncated to length 0. If the file is a FIFO or terminal device file, the O_TRUNC flag is ignored. Otherwise the effect of O_TRUNC is unspecified. Change-Id: I76b55419871fc758cbe82532f9b75476a0c14101 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5268 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* extras/hook-scripts: Set of changes for new samba share method.Raghavendra Talur2013-06-284-42/+176
| | | | | | | | | | | | | | | | | | | New method of creating a share of gluster volume through samba eliminates the requirement of fuse mount and changes in fstab. glusterfs vfs plugin has to be specified as required vfs object. Path now is relative to the root of gluster volume. / signifies complete volume. Change-Id: I3d80452cd58513ef59d6a816c1ab62ebc3b76a62 BUG: 953694 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/5247 Reviewed-by: José Rivera <jrivera@redhat.com> Tested-by: José Rivera <jrivera@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: sync glusterfs.spec.in with Fedora glusterfs.specKaleb S. KEITHLEY2013-06-281-1/+2
| | | | | | | | | | | | | | * fix the hardening fix for shlibs * use %{__sed} macro * better short ChangeLog * fix hard-coded path in extras/systemd/glusterd.service in, use @prefix@ Change-Id: I267244b68a97cbcd6f6ab62fc322c78db45023bb BUG: 950083 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5264 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: sync glusterfs.spec.in with Fedora glusterfs.specKaleb S. KEITHLEY2013-06-265-13/+38
| | | | | | | | | | | | | | | | | | | | | | * add glusterfs-api and glusterfs-api-devel sub-packages * add extras/systemd/glusterd.service. Use it (or extras/init.d/glusterd) instead of the Fedora versions. * restores ability to build glusterfs RPMs from the dist tarball with 'rpmbuild {-ts,-tb,-ta} glusterfs-XXX.tar.gz' * other minor cleanups mostly to sync with fedora .spec and to build from the dist tarball. Any differences will be resolved in the fedora .spec in the next release (i.e. beta4 or GA). (still considering whether to add fedora glusterfsd.{init,service} files to glusterfs or remove them from fedora.) BUG: 950083 Change-Id: Ibda3cd57b24ef5c2a27446703e718e5044ec546c Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5230 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Bala FA <barumuga@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* extras: prevent "glusterd dead but subsys locked"Niels de Vos2013-05-251-1/+0
| | | | | | | | | | | | | | | | | | | | | Commit b5bf14a6 added support for a file under /var/lock/subsys, Hoewever, killproc does remove the $PIDFILE which cases subsequent checks on its existence to fail. When glusterd was stopped successfully, the $PIDFILE has been removed already, there is no need to try to remove is again. Upon executing '/sbin/service glusterd status', the message 'glusterd dead but subsys locked' would be returned because the file under /var/lock/subsys was not removed. Bug: 960476 Change-Id: I781fe463e3c5472e42d668155cee4f63d349a568 Reported-by: Satheesaran Sundaramoorthi <sasundar@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5074 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-16 23:21:32 +0000