summaryrefslogtreecommitdiffstats
path: root/geo-replication
Commit message (Collapse)AuthorAgeFilesLines
* geo-rep: Symlink Rename issueAravinda VK2016-01-032-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | If ENTRY creation failed for symlink in Slave and symlink renamed in Master. If Source not exists to Rename in Slave Geo-rep interprets as Create of Target file. Geo-rep sends blob of regular file to create symlink instead of sending blob of symlink. With this patch, Geo-rep identifies symlink and sends respective blob. BUG: 1292697 Change-Id: If9351974d1945141a1d3abb838b7d0de7591e48e Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/12917 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Tested-by: Milind Changire <mchangir@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> (cherry picked from commit 3151194fad1aed3ab340b53aeeb4e8d131538d12) Reviewed-on: http://review.gluster.org/12998 Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Fix syntax errors in GsyncdErrorAravinda VK2016-01-031-3/+2
| | | | | | | | | | | | | | | | %s was not replaced by actual values in GsyncdError BUG: 1279644 Change-Id: I3c0a10f07383ca72844a46f930b4aa3d3c29f568 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/12566 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> (cherry picked from commit 74699ddd777f7e862991cf3afad91823d30e5b84) Reviewed-on: http://review.gluster.org/12724 Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Fix getting subvol countKotresh HR2016-01-031-1/+4
| | | | | | | | | | | | | | | | Tiering doesn't support disperse volume as hot tier, hence xml output doesn't give 'hotdisperseCount'. Remove the usage of 'hotdisperseCount' in geo-rep and return 0 instead. BUG: 1293309 Change-Id: I3f50d21cb51db91e31faebf69af4f72360420b73 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13062 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/13068
* geo-rep: Fix getting subvol numberKotresh HR2016-01-032-17/+47
| | | | | | | | | | | | | | | | | | | Fix getting subvol number if the volume type is tier. If the volume type was tier, the subvol number was calculated incorrectly and hence few of workers didn't become ACTIVE resulting in files not being replicated from corresponding brick. This patch addresses the same. BUG: 1293309 Change-Id: I318de346657d330a2394507514bdff61feb92d27 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12994 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-on: http://review.gluster.org/13059
* Add support for sparse files to tarssh methodAlex Markelov2015-12-301-1/+1
| | | | | | | | | | | | | | | | | | | Without '--sparse' option tar will not properly archive sparse file and geo-replication will result in non-sparse file on the remote end. Here is more on how I arrived at this http://markelov.org/wiki/index.php/GlusterFS_3.6.1_on_CentOS_6.5:_geo-replication_and_sparse_files_problem Change-Id: I8d671964a1b48bbb916e4a064571221bf3631494 BUG: 1290719 Signed-off-by: Alex Markelov <alex@markelov.org> Reviewed-on: http://review.gluster.org/12476 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> (cherry picked from commit eff14863fb6a6da0ccf8a40343160b09f29ea493) Reviewed-on: http://review.gluster.org/12949 Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: use cold tier bricks for namespace operationsSaravanakumar Arumugam2015-12-074-17/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: symlinks are not getting synced to slave in a Tiering based volume. Solution: Now, symlinks are created directly in cold tier bricks( in the backend). Earlier, cold tier was avoided for namespace operations and only hot tier was used while processing changelogs. Now, cold tier is HASH subvolume in a Tiering volume. So, carry out namespace operation only in cold tier subvolume and avoid hot tier subvolume to avoid any races. Earlier, XSYNC was used(and changeloghistory avoided) during initial sync in order to avoid race while processing historychangelog in Hot tier. This is no longer required as there is no race from Hot tier. Also, avoid both live and history changelog ENTRY operations from Hot tier to avoid any race with cold tier. Change-Id: Ia8fbb7ae037f5b6cb683f36c0df5c3fc2894636e BUG: 1288027 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/12844 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> (cherry picked from commit 93f31189ce8f6e2980a39b02568ed17088e0a667) Reviewed-on: http://review.gluster.org/12891
* geo-rep: fd close and fcntl issueAravinda VK2015-12-071-15/+19
| | | | | | | | | | | | | | | | | | | | | When any of the open fd of a file is closed on which fcntl lock is taken even though another fd of the same file is open on which lock is taken, all fcntl locks will be released. This causes both replica workers to be ACTIVE sometimes. This patche fixes that issue. BUG: 1287456 Change-Id: I8f113230d16075f18020044898a7eda5e2a5a0ac Original-Author: Aravinda VK <avishwan@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12752 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/12842
* geo-rep: Avoid cold tier bricks during ENTRY operationSaravanakumar Arumugam2015-12-074-5/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a series of patch which aims to fix geo-replication in a Tiering Volume. Problem: Consider, a file is placed in volume initially and then hot tier is attached. During any operation on the file, due to lookup a linkto file is created in hot tier. Now, any namespace operation carried out on the file is recorded in both cold and hot tier. There is a room for races when both changelogs are replayed. Solution: So, We are going to replay (namespace related)operations only in the hot tier. Why? a. If the file is directly placed in Hot tier , all fops will be recorded in HOT tier. b. If the file is already present in Cold tier, and if any fop is carried out, it creates linkto file in Hot tier. Now, operations like UNLINK, RENAME are captured in Hot tier(by means of linkto file). This way, we can get both tier's operation in HOT tier itself. Now, once the file is demoted to COLD tier, any namespace operation carried out on the cold tier can be avoided as we directly RECORD the same in HOT tier. How? 1. Check whether the brick is cold tier and skip ENTRY operation. 2. Also, if it is cold tier brick, use Xsync(which is used during initial run). This will help in getting all cold tier bricks changes using File System crawl and helps in avoiding races with hot tier brick(which can happen if historychangelog used in cold tier brick). Dependent patches: 1. http://review.gluster.org/12239 2. http://review.gluster.org/12326 Change-Id: I7692b1dbb8813a7e253451bca02f8f09a5782dde BUG: 1275173 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/12355 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> (cherry picked from commit 6188b5fcebc56b3d8af1956beeec9988f3e8f268) Reviewed-on: http://review.gluster.org/12429 Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: geo-rep to handle CAPS based HostnameSaravanakumar Arumugam2015-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Problem: geo-replication session creation fails when Hostname is having CAPS in it. Issue is with the regex pattern which handles only small lettered Hostname. Fix: Fix the regex pattern to handle CAPS based hostname as well. Change-Id: I5c99c102e9706acc2b1fab1e6bf158e68beed373 BUG: 1287960 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/12216 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> (cherry picked from commit f6142e97c6219d2c1c482a414690020ed1275bdb) Reviewed-on: http://review.gluster.org/12862 Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Fix Geo-rep logging to log datetime in GMT/UTCAravinda VK2015-12-021-0/+1
| | | | | | | | | | | | | | | | Geo-rep is logging in Local time, all other Gluster logs are in GMT/UTC. It is very difficult to co-relate Geo-rep logs with other Gluster logs. BUG: 1284737 Change-Id: Ieae8bda7e4788e587cf4595e21e0e772c210cfbb Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/12583 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> (cherry picked from commit 41e900199d7f369862b21b739dd11602d0d7c48d) Reviewed-on: http://review.gluster.org/12723 Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* geo-rep: Fix FD leak from Active Geo-rep workerAravinda VK2015-12-012-0/+16
| | | | | | | | | | | | | | | | | | | | | Active worker tries to acquire lock in each iteration. On every successfull lock acqusition it was not closing previously opened lock fd. To see the leak, get the PID of worker, ps -ax | grep feedback-fd watch ls /proc/$pid/fd BUG: 1225567 Change-Id: Ic476c24c306e7ab372c5560fbb80ef39f4fb31af Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/12332 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> (cherry picked from commit 42def948ac8e5d24278cb000cc8f8906b83a8592) Reviewed-on: http://review.gluster.org/12650 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: Handle FXATTROP and XATTROPKotresh HR2015-11-271-1/+2
| | | | | | | | | | | | | | | | | | | GEO-REP INTEROP WITH SHARD FEATURE If it is FXATTROP or XATTROP in changelog, add the gfid to rsync queue. BUG: 1284453 Change-Id: If598da1543bbff7fe9228ba57c7e813ed2a3a7f2 Reviewed-on: http://review.gluster.org/12226 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12721 Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Fix syncing chown in xsync crawlKotresh HR2015-11-271-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GEO-REP INTEROP WITH SHARD FEATURE Problem: The sequence of entry creation and chown in master is recorded as creation of entry with resulted user:group in xsync changelog. During sync, entry creation is always split into two ops, MKNOD and SETATTR. Hence the issue is not being hit otherwise it would have failed with EPERM if parent is owned by different user. But with shard translator being enabled on slave, doing entry creation with MKNOD and SETATTR is not allowed, SETATTR fails as it accesses inode structure which is not linked. Solution: The sequence of entry creation and chown in master should be recorded as MKNOD and SETATTR separately always and do entry creation with single op in gfid-access xlator. The gfid-access patch will be sent separately. BUG: 1284453 Change-Id: Ia577aa5270cb96b86830885d6c4c01fb0133eeed Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12205 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/12729 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: New Config option for ssh_portAravinda VK2015-11-242-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | If different port used for SSH instead of 22, Geo-replication was failing to establish SSH connection. ssh_port option can be added using config:ssh_command and config:ssh_command_tar, but user has to remember complete ssh command used with parameter to add/modify ssh port. This patch adds new config option for ssh_port, gluster volume geo-replication <MASTERVOL> <SLAVEHOST::<SLAVEVOL> \ config ssh_port 52022 Change-Id: I7753a09485f0b1f49d2b2a80b962c720817c96f4 Signed-off-by: Aravinda VK <avishwan@redhat.com> BUG: 1283060 Reviewed-on: http://review.gluster.org/12444 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> (cherry picked from commit 7d35eb5926869ed084295600502a85ce13be506f) Reviewed-on: http://review.gluster.org/12607 Reviewed-by: Kotresh HR <khiremat@redhat.com>
* geo-rep: Make restrictive ssh keys optionalKotresh HR2015-11-241-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In containerized environment where networking configuration is "net=host", both host and containers use the same IP. The validations gsyncd shell and rsync to be the siblings fails. Hence, for now, creating restrictive ssh keys is made optional as follows. If the argument 'container' is passed, it will create non restrictive ssh keys else restrictive ssh keys. e.g., gluster system:: execute gsec_create container Creates non restrictive ssh keys. gluster system:: execute gsec_create Creates restrictive ssh keys. Change-Id: Ibed362f64b9b4c9931207f863a2da944c6bd1d66 BUG: 1283060 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12459 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> (cherry picked from commit 6e036c758add503a170cc3134e95fea3e78e89cb) Reviewed-on: http://review.gluster.org/12606
* geo-rep: Kill Geo-rep Worker when Agent process diesAravinda VK2015-11-243-14/+44
| | | | | | | | | | | | | | | | | | | | When Changelog agent process dies, Geo-replication fails to detect and worker will run without respective Changelog agent. Status shows Active/Passive without any progress. With this patch, Worker process gets killed whenever Changelog agent dies. Change-Id: I30b4cc77f924f7e8174b8bfe415ac17f0b3851b4 Signed-off-by: Aravinda VK <avishwan@redhat.com> BUG: 1279362 Reviewed-on: http://review.gluster.org/12485 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit 5d1ff7efd6ab3bd29a29922a9ea1e1aaf02544ad) Reviewed-on: http://review.gluster.org/12550
* glusterd/geo-rep: Adding ssh-port option for geo-rep createKotresh HR2015-11-231-5/+5
| | | | | | | | | | | | | | | | | | | | | | Geo-replication uses default ssh port 22 for setup. i.e., to distribute ssh keys to slaves. In container environments, custom port number might be used. Hence to support custom port number for ssh, option is provided in geo-rep create command to take the same. Change-Id: I0fb61959b1c085342b8e4c21ac4e076fba5462f1 BUG: 1283060 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12504 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> (cherry picked from commit 5bb3c521431cc27b2826acd889bffb2f90ae7f73) Reviewed-on: http://review.gluster.org/12652 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Update last_synced_time in XSyncAravinda VK2015-11-091-14/+9
| | | | | | | | | | | | | | | | | During XSync crawl, last_synced time in status file was not updated. This patch fixes the issue by updating status file when stime xattr is updated after Xsync or Changelog Crawl. Change-Id: I4dc3a2d4c3d8378a939da0868caf1aef4f789599 Signed-off-by: Aravinda VK <avishwan@redhat.com> BUG: 1279306 Reviewed-on: http://review.gluster.org/11771 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> (cherry picked from commit ee0b1a3bf11a4d05696212d91c932ddb7c7091ee) Reviewed-on: http://review.gluster.org/12545 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Update geo-rep status, if monitor process is killedSaravanakumar Arumugam2015-11-012-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When the monitor process itself is getting killed, geo-rep session still shows as active. Status command will just pick up the content from the status file to show the output. Monitor process is the one which updates the Status file. When the monitor process itself gets killed, there is no way to update the status file. So, geo-rep session status command ends up showing last updated Status present in the status file. Solution: While getting the status output, check whether monitor process is running. If it is NOT running, update the status as STOPPED. Change-Id: I86a7ac1746dd8f27eef93658e992ef16f6068d9d BUG: 1276060 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/11873 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> (cherry picked from commit 4d4c7d5dc54850dcf916083b2b1398d9bfe2bfe6) Reviewed-on: http://review.gluster.org/12448 Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Add data operation if mknod with tier attributeSaravanakumar Arumugam2015-10-291-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a series of patches which aims to fix geo-replication in a Tiering Volume. Problem: Consider, a file is placed in volume initially and then hot tier is attached. During any operation on the file, due to lookup a linkto file is created in hot tier. Now, any namespace operation carried out on the file is recorded in both cold and hot tier. There is a room for races when both changelogs are replayed. Solution: So, We are going to replay (namespace related)operations only in the hot tier. Why? a. If the file is directly placed in Hot tier, all fops will be recorded in HOT tier. b. If the file is already present in Cold tier, and if any fop is carried out, it creates linkto file in Hot tier. Now, operations like UNLINK, RENAME are captured in Hot tier(by means of linkto file). This way, we can get both tier's operation in HOT tier itself. But, We may miss initial Data sync immediately after creating the file as it is only recording MKNOD. So, if MKNOD encountered with sticky bit set, queue DATA operation for the corresponding gfid. (This is addressed here in this patch) So, If tier-gfid linkto is set, we need to record the corresponding MKNOD. Earlier this was avoided as it was set as INTERNAL fop. (This changelog related changes are addressed in the patch: - http://review.gluster.org/12417) Change-Id: I2fa84cfa2b0f86506c3d15d484138ab9651e4f83 BUG: 1275173 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/12326 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> (cherry picked from commit ffc39c9d8807464b5c78959bc43dc12b22f5a37b) Reviewed-on: http://review.gluster.org/12427 Reviewed-by: Venky Shankar <vshankar@redhat.com>
* gverify: Adding StrictHostKeyChecking=no for ssh verificationM S Vishwanath Bhat2015-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | | Before actually checking the compatibility between master and slave, gverify checks if there is a passwordless ssh connection between master to slave. So if the entry of the slave was not present in 'known_hosts' file in master gverify used to complain that passwordless ssh has not been setup. This used to happen even if there is a passwordless ssh between master to slave. This patch fixes the above problem by using StrictHostKeyChecking=no while doing ssh to slave. Reviewed-on: http://review.gluster.org/11106 Change-Id: I01577ffa82a4504b4674fe26a5256ca890777557 BUG: 1231678 Signed-off-by: M S Vishwanath Bhat <vbhat@redhat.com> Reviewed-on: http://review.gluster.org/11225 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* geo-rep: Do not crash worker on ESTALEKotresh HR2015-08-051-9/+1
| | | | | | | | | | | | | | | | Handle ESTALE returned by lstat gracefully by retrying it. Do not crash the worker. BUG: 1249547 Change-Id: I57fb9933900153ab41c3d9b73748b1cdaa8d89ca Reviewed-on: http://review.gluster.org/11772 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11820 Reviewed-by: Milind Changire <mchangir@redhat.com>
* geo-rep: Fix history failureKotresh HR2015-08-052-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | Both ACTIVE and PASSIVE workers register to changelog at almost same time. When PASSIVE worker becomes ACTIVE, the start and end time would be current stime and register_time repectively for history API. Hence register_time would be less then stime for which history obviously fails. But it will be successful for the next restart as new register_time > stime. Fix is to pass current time as the end time to history call instead of the register_time. Also improvised the logging for ACTIVE/PASSIVE switching. BUG: 1247882 Change-Id: I40c582cc32fe29a6c30340ec81a3b5d30e461e71 Reviewed-on: http://review.gluster.org/11524 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11784 Reviewed-by: Milind Changire <mchangir@redhat.com>
* geo-rep: Fix fd referenced before assignmentKotresh HR2015-07-121-2/+6
| | | | | | | | | | | | | | | | Fix fd reference before assignment in mgmt_lock function. BUG: 1240607 Change-Id: Ib8a5207a516eecb55a5f906ff5d49abc98cab2a6 Reviewed-on: http://review.gluster.org/11318 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11563 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Fix add user in mountbroker user managementKotresh HR2015-06-281-1/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | The CLI 'gluster system:: execute mountbroker user <USERNAME> <VOLUMES>' to set volumes associated with a user replaces existing user and associated volumes upon setting with existing user. This patch fixes it by appending the volumes if the user already exists. It also introduces following CLI to remove volume for a corresponding user. 'gluster system:: execute mountbroker volumedel <USERNAME> <VOLUME>' <USERNAME>: username <VOLUME>: comman separated list of volumes to delete If it is the last volume to be deleted associated with the user, it will delete the user as well as it doesn't make sense to keep only user without volumes associated. Change-Id: I4c7240ce912e1b836794bf0682a5fc6e5b2adc70 BUG: 1235428 Reviewed-On: http://review.gluster.org/11385 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11386 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: ignore ESTALE as ENOENTAravinda VK2015-06-282-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | When DHT can't resolve a File it raises ESTALE, ignore ESTALE errors same as ENOENT after retry. Affected places: Xattr.lgetxattr os.listdir os.link Xattr.lsetxattr os.chmod os.chown os.utime os.readlink BUG: 1236093 Change-Id: I53f8dfa47911da93e0dcc20213afcbb47a14ccd8 Reviewed-On: http://review.gluster.org/11296 Original-Author: Aravinda VK <avishwan@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11430 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Fix geo-rep fanout setup with meta volumeKotresh HR2015-06-251-2/+2
| | | | | | | | | | | | | | | | | | | Lock filename was formed with 'master volume id' and 'subvol number'. Hence multiple slaves try acquiring lock on same file and become PASSIVE ending up not syncing data. Using 'slave volume id' in lock filename will fix the issue making lock file unique across different slaves. Change-Id: I64c84670a5d9e1b0dfbdeb4479ee6b8e0c6b829e BUG: 1234898 Reviewed-On: http://review.gluster.org/11367 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11366 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Fix glusterd working directoryKotresh HR2015-06-251-0/+1
| | | | | | | | | | | | | | | | | | | Mountbroker setup in geo-replication requires the script 'set_geo_rep_pem_keys.sh to be run manually out of gluster context. Hence the ${GLUSTERD_WORKDIR} is never set. So getting glusterd working dir using 'gluster system:: getwd'. BUG: 1235297 Reviewed-On: http://review.gluster.org/11381 Change-Id: If708ad4294ee726ba7769b8052a0b3a25f93df2a Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11382 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Fix toggling of use_meta_volume configKotresh HR2015-06-251-1/+1
| | | | | | | | | | | | | | | | | If meta-volume is deleted and use_meta_volume is set to false, geo-rep still fails complaining meta volume is not mounted. The patch fixes that issue. BUG: 1234695 Change-Id: I5ec7ad85399b90e85bca1d36750dd3fb29222db9 Reviewe-On: http://review.gluster.org/11358 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11359 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* build: fix compiling on older distributionsNiels de Vos2015-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | data-tiering is disabled on RHEL-5 because it depends on a too new SQLite version. This change also prevents installing some of files that are used by geo-replication, which is also not available on RHEL-5. geo-replication depends on a too recent version of Python. Due to an older version of OpenSSL, some of the newer functions can not be used. A fallback to previous functions is done. Unfortunately RHEL-5 does not seem to have TLSv1.2 support, so only older versions can be used. Cherry picked from commit 0209b18fd65f9df5ebd0a8764ebf864d0d392998: > Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 > BUG: 1222317 > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: http://review.gluster.org/10803 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> > Reviewed-by: Vijay Bellur <vbellur@redhat.com> Also including the changes from http://review.gluster.org/11140: > build: improve detection of new OpenSSL features > > Building on Mac OS X revealed that the current check for > CRYPTO_THREADID_set_callback() availability in OpenSSL is not correct. > > There also does not seem to be a guarantee that TLSv1_2_method() is > available when TLS1_2_VERSION is #define'd. > > Change-Id: I21508065fc181a1c74bee4fd6d23bb5bdf7cea7a > BUG: 1222317 > Reviewed-on: http://review.gluster.org/11140 > Original-author: Kaleb KEITHLEY <kkeithle@redhat.com> > Signed-off-by: Niels de Vos <ndevos@redhat.com> Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 BUG: 1228510 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11096 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* geo-rep: Ignore ESTALE during unlink/rmdirAravinda VK2015-05-311-4/+6
| | | | | | | | | | | | | | | | | | during unlink/rmdir of Parent_GFID/Basename, if parent directory does not exists. Parent GFID will not get resolved and DHT raises ESTALE instead of ENOENT. Now ESTALE errors ignored during unlink/rmdir BUG: 1223286 Change-Id: If275c89fb9fc7d16004550805a4cd65be818540d Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed On: http://review.gluster.org/#/c/10837/ Reviewed-on: http://review.gluster.org/10913 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Fix Data counter issue in statusAravinda VK2015-05-311-2/+12
| | | | | | | | | | | | | | | | | ENTRY and META operations executed sequentially, DATA operations are handled async, increment happens when a changelog parsed. Decrement happens after the sync of all files. files_in_batch was reset multiple times in batch instead of once. BUG: 1224100 Change-Id: I87617f2fd5f4d3221a1c9f9d5a8efb0686c42bbe Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed On: http://review.gluster.org/#/c/10911/ Reviewed-on: http://review.gluster.org/10912 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Disable xattrs and acls support with tar_sshKotresh HR2015-05-292-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Geo-rep can't sync xattrs and acls with tar over ssh for following reasons. Issue 1: xattrs doesn't sync with tar over ssh. Reason: untar doesn't respect '--overwrite' option when used along with '--xattrs'. So it sends unlink if the file exists on destination and re-creates afresh. But all entry operations are banned in aux-gfid-mount as it may lead to gfid-mismatch. Hence fails with EPERM. This happens only when some xattr is set on a file in master volume. Issue2: acls on directories does not sync with tar over ssh. Reason: tar tries to opendir ".gfid/<gfid1>" and is not supported by gfid-access-translator as readirp can't be handled on virtual inodes and hence fails with ENOTSUP where as it syncs for files. Since the issue is with tar commmand it self and nothing could be done from gluster side, disabling xattr and acls support with tar over ssh option. Geo-rep can sync xattrs and acls with 'rsync' as the sync engine. BUG: 1223644 Change-Id: Ieba9e749ddbc41683b58ed8b1cc2ca50517fe58b Reviewed On: http://review.gluster.org/#/c/10873 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10899 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Aravinda VK <avishwan@redhat.com>
* geo-rep: Fix corrupt gsyncd outputAravinda VK2015-05-091-3/+3
| | | | | | | | | | | | | | | When gsyncd fails with Python traceback, glusterd fails parsing gsyncd output and shows error. BUG: 1219938 Change-Id: Ic32fd897c49a5325294a6588351b539c6e124338 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10694 Reviewed-on: http://review.gluster.org/10695 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Fix Default values in Xml outputAravinda VK2015-05-081-0/+9
| | | | | | | | | | | | | | Default Values for last_synced, checkpoint_time and checkpoint_completion_time was zero instead of 'N/A' BUG: 1218586 Change-Id: I8a96688588dd6e22edf8bc06ee0f3afe12a9e0f5 Reviewed-on: http://review.gluster.org/10580 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10636 Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Fix Rsync hang issueAravinda VK2015-05-081-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | When rsync is executed using Python subprocess, by default stdout of subprocess will be None. With the log rsync performance patch stdout is assigned to PIPE. Rsync writes to that PIPE whenever it syncs files. If log_rsync_performance is disabled then nobody will consume stdout and that gets full. Rsync hangs if PIPE is full. log_rsync_performance option is introduced with patch 10070 With this patch stdout=PIPE only if log_rsync_performance is enabled. Also removed -v option from Rsync. Thanks Venky and Kotresh for RCA. BUG: 1219444 Change-Id: I4b06ca2ebdcb93ac8319f60bc637182fb3d38091 Original-Author: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10556 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10634 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Limit number of changelogs to process in batchAravinda VK2015-05-071-6/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changelog processing is done in batch, for example if 10 changelogs available for processing then process all at once. Collect Entry, Meta and Data operations separately, All the entry operations like CREATE, MKDIR, MKNOD, LINK, UNLINK will be executed first then rsync will be triggered for whole batch. Stime will get updated once the complete batch is complete. In case of large number of Changelogs in a batch, If geo-rep fails after Entry operations, but before rsync then on restart, it again starts from the beginning since stime is not updated. It has to process all the changelogs again. While processing same changelogs again, all CREATE will get EEXIST since all the files created in previous run. Big hit for performance. With this patch, Geo-rep limits number of changelogs per batch based on Changelog file size. So that when geo-rep fails it has to retry only last batch changelogs since stime gets updated after each batch. BUG: 1217930 Change-Id: I844448c4cdcce38a3a2e2cca7c9a50db8f5a9062 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10202 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10499 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Minimize rm -rf race in Geo-repAravinda VK2015-05-063-26/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While doing RMDIR worker gets ENOTEMPTY because same directory will have files from other bricks which are not deleted since that worker is slow processing. So geo-rep does recursive_delete. Recursive delete was done using shutil.rmtree. once started, it will not check disk_gfid in between. So it ends up deleting the new files created by other workers. Also if other worker creates files after one worker gets list of files to be deleted, then first worker will again get ENOTEMPTY again. To fix these races, retry is added when it gets ENOTEMPTY/ESTALE/ENODATA. And disk_gfid check added for original path for which recursive_delete is called. This disk gfid check executed before every Unlink/Rmdir. If disk gfid is not matching with GFID from Changelog, that means other worker deleted the directory. Even if the subdir/file present, it belongs to different parent. Exit without performing further deletes. Retry on ENOENT during create is ignored, since if CREATE/MKNOD/MKDIR failed with ENOENT will not succeed unless parent directory is created again. Rsync errors handling was handling unlinked_gfids_list only for one Changelog, but when processed in batch it fails to detect unlinked_gfids and retries again. Finally skips the entire Changelogs in that batch. Fixed this issue by moving self.unlinked_gfids reset logic before batch start and after batch end. Most of the Geo-rep races with rm -rf is eliminated with this patch, but in some cases stale directories left in some bricks and in mount point we get ENOTEMPTY.(DHT issue, Error will be logged in Slave log) BUG: 1218922 Change-Id: I8716b88e4c741545f526095bf789f7c1e28008cb Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10204 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10599 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: Status EnhancementsAravinda VK2015-05-067-374/+608
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Discussion in gluster-devel http://www.gluster.org/pipermail/gluster-devel/2015-April/044301.html MASTER NODE - Master Volume Node MASTER VOL - Master Volume name MASTER BRICK - Master Volume Brick SLAVE USER - Slave User to which Geo-rep session is established SLAVE - <SLAVE_NODE>::<SLAVE_VOL> used in Geo-rep Create command SLAVE NODE - Slave Node to which Master worker is connected STATUS - Worker Status(Created, Initializing, Active, Passive, Faulty, Paused, Stopped) CRAWL STATUS - Crawl type(Hybrid Crawl, History Crawl, Changelog Crawl) LAST_SYNCED - Last Synced Time(Local Time in CLI output and UTC in XML output) ENTRY - Number of entry Operations pending.(Resets on worker restart) DATA - Number of Data operations pending(Resets on worker restart) META - Number of Meta operations pending(Resets on worker restart) FAILURES - Number of Failures CHECKPOINT TIME - Checkpoint set Time(Local Time in CLI output and UTC in XML output) CHECKPOINT COMPLETED - Yes/No or N/A CHECKPOINT COMPLETION TIME - Checkpoint Completed Time(Local Time in CLI output and UTC in XML output) XML output: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> cliOutput> geoRep> volume> name> sessions> session> session_slave> pair> master_node> master_brick> slave_user> slave/> slave_node> status> crawl_status> entry> data> meta> failures> checkpoint_completed> master_node_uuid> last_synced> checkpoint_time> checkpoint_completion_time> BUG: 1218586 Change-Id: I944a6c3c67f1e6d6baf9670b474233bec8f61ea3 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10121 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10574 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: log ENTRY failures from slave on masterMilind Changire2015-05-063-10/+48
| | | | | | | | | | | | | | | | ENTRY operations failures on slave left no trace for debugging purposes. This patch captures such failures on slave cluster and forwards them to the master and logs them. Failures of specific interest are the ones which return code EEXIST on the failing operations. Change-Id: Iecab876f16593c746d53f4b7ec2e0783367856bb Signed-off-by: Milind Changire <mchangir@redhat.com> BUG: 1217429 Reviewed-on: http://review.gluster.org/10048 Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10517 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System
* geo-rep: Changes required as part of changelog version 1.2Kotresh HR2015-05-041-0/+6
| | | | | | | | | | | | | | | | | | | | The index value for UNLINK and RMDIR in changelog is no more the last index. It varies based on whether the 'changelog.capture-del-path' is enabled or not. Hence, fixed index is used. The option to capture deleted path in changelog comes with the patch: http://review.gluster.org/#/c/10288/ And the parser changes with http://review.gluster.org/#/c/10166/ BUG: 1217935 Change-Id: I6d8a941129416381e24226faed9803f7e5fae8d0 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10344 Reviewed-on: http://review.gluster.org/10500 Tested-by: NetBSD Build System Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: Fix minor bugs in meta-volume setupKotresh HR2015-05-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | 1. Access unreferenced access of fd: In meta volume configuration for geo-rep, if geo-rep directory is not created yet, open fails with no fd, but it is accessed in close(fd). So after creating 'geo-rep' directory in meta-volume, open the lock file to get fd. 2. Fix volume_id in forming lock file name. For the very first time, gconf.volume_id would be null, as config is not reloaded yet. Hence, use 'uuid' function to get the volume id. BUG: 1217939 Change-Id: I06bf659ec506943c7ebf5303cc56a2e7748fbad0 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10458 Reviewed-on: http://review.gluster.org/10506 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Aravinda VK <avishwan@redhat.com>
* geo-rep: Adhering to the common storage for geo-repKotresh HR2015-05-044-35/+23
| | | | | | | | | | | | | | | | | | | | Making geo-rep use the common storage shared by nfs, snapshot and geo-rep. The meta volume should be named as gluster_shared_storage, and it should be mounted at "/var/run/gluster/shared_storage/". Geo-rep will create a directory called 'geo-rep' in the meta-volume and all the lock files are created inside it. BUG: 1217939 Change-Id: I1d88798376d68340e2b2eff018c7e4f0121a608a Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10196 Reviewed-on: http://review.gluster.org/10503 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* geo-rep: Re Enable ignore_deletes OptionAravinda VK2015-05-032-2/+7
| | | | | | | | | | | | | | | | | | | | | | | If this option is set, Deletes will not be propogated to Slave. This option is applicable for UNLINK and RMDIR. gluster volume geo-replication <MASTER> <SLAVEHOST>::<SLAVEVOL> \ config ignore_deletes true Default value is false. PS: Use this option with caution, If you create the file in master with same path then it fails to sync to slave. Old file in Slave will have different GFID compared to New. BUG: 1217929 Change-Id: I1f7816d1ea36460a654873739d3fb1b6c13e0f8d Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9583 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10498 Tested-by: NetBSD Build System
* geo-rep: Do not fail-back to xsync if Changelog is failedAravinda VK2015-05-031-25/+16
| | | | | | | | | | | | | | | | | | Unless change_detector is set to xsync, do not fallback to xsync, except during Initial Sync or Partial History. When a brick goes down, Changelog exception is raised due to which geo-rep fallback to xsync. Even after brick comes back geo-rep will not consume Changelog. BUG: 1217928 Change-Id: I1f8ea26ac7735f6ee09b3b143ee3eb66bfc9fc37 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9758 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10496
* geo-rep: Log Rsync performanceAravinda VK2015-04-022-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | Introducing configurable option to log the rsync performance. gluster volume geo-replication <MASTERVOL> <SLAVEHOST>::<SLAVEVOL> \ config log-rsync-performance true Default value is False. Example log: [2015-03-31 16:48:34.572022] I [resource(/bricks/b1):857:rsync] SSH: rsync performance: Number of files: 2 (reg: 1, dir: 1), Number of regular files transferred: 1, Total file size: 178 bytes, Total transferred file size: 178 bytes, Literal data: 178 bytes, Matched data: 0 bytes, Total bytes sent: 294, Total bytes received: 32, sent 294 bytes received 32 bytes 652.00 bytes/sec Change-Id: If11467e29e6ac502fa114bd5742a8434b7084f98 Signed-off-by: Aravinda VK <avishwan@redhat.com> BUG: 764827 Reviewed-on: http://review.gluster.org/10070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Add support for aclsKotresh HR2015-03-304-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ACLS. When it sees SETXATTR in Changelog, it adds the file to data queue. rsync/tar+ssh will take care of syncing ACLS. User set ACLS will be synced to Slave. This requires "system.posix_acl_access" to go through when client-pid is equal GF_CLIENT_PID_GSYNCD in fuse layer. New config interface is introduced, sync-acls Which can be set using geo-rep config(Default is True) gluster volume geo-replication <VOLUME> <SLAVEHOST>::<SLAVEVOL> \ config sync-acls false Change-Id: I7eb3523fa72b8fed830efc98138891244e830d65 BUG: 1187021 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10001 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Use gfchangelog context init APIVenky Shankar2015-03-273-0/+10
| | | | | | | | | | | | | With the RPC based changes to {libgf}changelog, changelog_init is required before changelog_register. Change-Id: Id125b2bd2e51aaaffa22ecab463dfb739c50d83c Signed-off-by: Venky Shankar <vshankar@redhat.com> BUG: 1170075 Reviewed-on: http://review.gluster.org/9993 Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Tested-by: Saravanakumar Arumugam <sarumuga@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep/gverify: Ignore .trashcan while checking slave is empty.Kotresh HR2015-03-201-2/+2
| | | | | | | | | | | | | | | | With trash translator, '.trashcan' is created in gluster volume during init. So geo-rep create used to fail, with slave not being empty. The gverify script should ignore '.trashcan' while checking whether slave is empty. Change-Id: Ib7ee265c6aa99b63c7ccf103747d47a6f756ad35 BUG: 1203086 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9921 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Ignore .trashcan during xsync crawl.Kotresh HR2015-03-181-0/+1
| | | | | | | | | | | | | | | | With trash feature, .trashcan directory gets created at each export directory. Xsync picks .trashcan to sync and fails with EPERM. Xsync should ignore .trashcan directory. Change-Id: I45bd226c96011ace2c40dd2de878d886c7d34ce5 BUG: 1203293 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9934 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>