summaryrefslogtreecommitdiffstats
path: root/libglusterfs
Commit message (Collapse)AuthorAgeFilesLines
* syncop: Change return value of syncopPranith Kumar K2014-01-191-39/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: We found a day-1 bug when syncop_xxx() infra is used inside a synctask with compilation optimization (CFLAGS -O2). Detailed explanation of the Root cause: We found the bug in 'gf_defrag_migrate_data' in rebalance operation: Lets look at interesting parts of the function: int gf_defrag_migrate_data (xlator_t *this, gf_defrag_info_t *defrag, loc_t *loc, dict_t *migrate_data) { ..... code section - [ Loop ] while ((ret = syncop_readdirp (this, fd, 131072, offset, NULL, &entries)) != 0) { ..... code section - [ ERRNO-1 ] (errno of readdirp is stored in readdir_operrno by a thread) /* Need to keep track of ENOENT errno, that means, there is no need to send more readdirp() */ readdir_operrno = errno; ..... code section - [ SYNCOP-1 ] (syncop_getxattr is called by a thread) ret = syncop_getxattr (this, &entry_loc, &dict, GF_XATTR_LINKINFO_KEY); code section - [ ERRNO-2] (checking for failures of syncop_getxattr(). This may not always be executed in same thread which executed [SYNCOP-1]) if (ret < 0) { if (errno != ENODATA) { loglevel = GF_LOG_ERROR; defrag->total_failures += 1; ..... } the function above could be executed by thread(t1) till [SYNCOP-1] and code from [ERRNO-2] can be executed by a different thread(t2) because of the way syncop-infra schedules the tasks. when the code is compiled with -O2 optimization this is the assembly code that is generated: [ERRNO-1] 1165 readdir_operrno = errno; <<---- errno gets expanded as *(__errno_location()) 0x00007fd149d48b60 <+496>: callq 0x7fd149d410c0 <address@hidden> 0x00007fd149d48b72 <+514>: mov %rax,0x50(%rsp) <<------ Address returned by __errno_location() is stored in a special location in stack for later use. 0x00007fd149d48b77 <+519>: mov (%rax),%eax 0x00007fd149d48b79 <+521>: mov %eax,0x78(%rsp) .... [ERRNO-2] 1281 if (errno != ENODATA) { 0x00007fd149d492ae <+2366>: mov 0x50(%rsp),%rax <<----- Because it already stored the address returned by __errno_location(), it just dereferences the address to get the errno value. BUT THIS CODE NEED NOT BE EXECUTED BY SAME THREAD!!! 0x00007fd149d492b3 <+2371>: mov $0x9,%ebp 0x00007fd149d492b8 <+2376>: mov (%rax),%edi 0x00007fd149d492ba <+2378>: cmp $0x3d,%edi The problem is that __errno_location() value of t1 and t2 are different. So [ERRNO-2] ends up reading errno of t1 instead of errno of t2 even though t2 is executing [ERRNO-2] code section. When code is compiled without any optimization for [ERRNO-2]: 1281 if (errno != ENODATA) { 0x00007fd58e7a326f <+2237>: callq 0x7fd58e797300 <address@hidden><<--- As it is calling __errno_location() again it gets the location from t2 so it works as intended. 0x00007fd58e7a3274 <+2242>: mov (%rax),%eax 0x00007fd58e7a3276 <+2244>: cmp $0x3d,%eax 0x00007fd58e7a3279 <+2247>: je 0x7fd58e7a32a1 <gf_defrag_migrate_data+2287> Fix: Make syncop_xxx() return (-errno) value as the return value in case of errors and all the functions which make syncop_xxx() will need to use (-ret) to figure out the reason for failure in case of syncop_xxx() failures. Change-Id: I314d20dabe55d3e62ff66f3b4adb1cac2eaebb57 BUG: 1040356 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6475 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: Start using library versioning for various librariesHarshavardhana2014-01-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to libtool three individual numbers stand for CURRENT:REVISION:AGE, or C:R:A for short. The libtool script typically tacks these three numbers onto the end of the name of the .so file it creates. The formula for calculating the file numbers on Linux and Solaris is /path/to/library/<library_name>.(C - A).(A).(R) As you release new versions of your library, you will update the library's C:R:A. Although the rules for changing these version numbers can quickly become confusing, a few simple tips should help keep you on track. The libtool documentation goes into greater depth. In essence, every time you make a change to the library and release it, the C:R:A should change. A new library should start with 0:0:0. Each time you change the public interface (i.e., your installed header files), you should increment the CURRENT number. This is called your interface number. The main use of this interface number is to tag successive revisions of your API. The AGE number is how many consecutive versions of the API the current implementation supports. Thus if the CURRENT library API is the sixth published version of the interface and it is also binary compatible with the fourth and fifth versions (i.e., the last two), the C:R:A might be 6:0:2. When you break binary compatibility, you need to set AGE to 0 and of course increment CURRENT. The REVISION marks a change in the source code of the library that doesn't affect the interface-for example, a minor bug fix. Anytime you increment CURRENT, you should set REVISION back to 0. Change-Id: Id72e74c1642c804fea6f93ec109135c7c16f1810 BUG: 862082 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5645 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: Metadata cleanupVarun Shastry2014-01-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quota and marker uses 'trusted.glusterfs.quota*' and 'trusted.pgfid*' xattrs to store its configurations and accounting information and also to build the parent inode chain in case of absense of path. Problem: After disabling and then enabling quota back, the xattrs may contain stale data leading to impaired accounting and thus improper enforcement. Solution: Clean up all the quota related xattrs after quota disable. Marker xlator implements a virtual xattr to cleanup quota and pgfid xattrs. In this approach glusterd mounts an auxiliary mount and sends the below command to all the files by crawling the mountpoint. #setfattr -n "glusterfs.quota-xattr-cleanup" -v 1 <path/to/file> Credit: Krishnan Parthasarathi <kparthas@redhat.com> Varun Shastry <vshastry@redhat.com> Change-Id: I9380eca58a285dc27dd572de1767aac8f2cd8049 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6369 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* consolidate code for #ifdef HAVE_LINKAT usageVijay Bellur2014-01-141-1/+7
| | | | | | | | | | | | | | | | | | | | | sys_link() now does ifdef HAVE_LINKAT linkat (...) else link (...) endif Use sys_link() in all places where we previously had the conditional behavior. Change-Id: I8bce5ac1175efd2ba7ab4bb5b372f6d1e0365d28 BUG: 764655 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6633 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Anand Avati <avati@redhat.com>
* storage/posix: UNWIND right op_error and op_errno in *setxattr()Vijay Bellur2014-01-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | 1. errno was being set after gf_log() in posix_{f}handle_pair, this would cause errno to be overwritten. 2. dht would expect -1 for indication of failure in setxattr callback (dht_err_cbk()). posix_{f}setxattr has been changed to set op_ret as -1 instead of -op_errno. 3. dict_foreach() has been changed to return an error if the invoked fn() returns < 0. Bug report and test case credits to Zorro Lang <zlang@redhat.com> Change-Id: I96c15f12a5d7717b7584ba392f390a0b4f704a98 BUG: 1051896 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6684 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* locks: various fixesAnand Avati2014-01-132-1/+1
| | | | | | | | | | | | | | | | - implement ref/unref of entry locks (and fix bad pointer deref crashes) - code cleanup and deleted various data types - fix improper read/write lock conflict detection in entrylk - fix indefinite hang of blocked locks on disconnect - register locks in client_t synchronously, fix crashes in disconnect path Change-Id: Id273690c9111b8052139d1847060d1fb5a711924 BUG: 849630 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6638 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Glusterd : glusterd process generates core due to NULL store handleAtin Mukherjee2014-01-031-8/+8
| | | | | | | | | | | | | | | | | | | | | | | Problem : glusterd crashed as backtrace revealed that store handle was set to NULL. Solution : In glusterd_store_global_info() function out block the handle is dereferenced with out any NULL check which caused this segmentation fault. A NULL check is introduced to avoid this. While testing this fix, another issue was noticed where GF_ASSERT macro again does not gurantee the NULL dereference check and hence this macro call has been replaced by GF_VALIDATE_OR_GOTO macro call in places where there is a danger of macro getting crashed due to NULL dereference check. Change-Id: Ic301aa45ce4bbdc2da751d2386439df7bb24c016 BUG: 1040844 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/6619 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Use linkat() instead of link() for portability sakeEmmanuel Dreyfus2014-01-021-1/+1
| | | | | | | | | | | | | | | | POSIX does not says wether link(2) on symlink should link on symlink itself or on target. Linux use symlink, most other systems use target. Using linkat(2) allows the behavior to be specified, so that the behavior is portable. Also fix configure test for NetBSD linkat(2), which ceased to work. BUG: 764655 Change-Id: I2633fde3b0828ca8c199e11c827720c513e15852 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6613 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Use linkat() instead of link() for portability sakeEmmanuel Dreyfus2014-01-021-0/+5
| | | | | | | | | | | | | | | | POSIX does not says wether link(2) on symlink should link on symlink itself or on target. Linux use symlink, most other systems use target. Using linkat(2) allows the behavior to be specified, so that the behavior is portable. Also fix configure test for NetBSD linkata(2), which ceased to work. BUG: 764655 Change-Id: Iccd27ac076b7a74e40dcbaa1c4762fd3ad59da5f Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6539 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Add missing goto in eh_new()Vijay Bellur2014-01-011-0/+1
| | | | | | | | | Change-Id: I64bbd8d5d919e78286a0521b62ca75f22ad296fa BUG: 795419 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6623 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* gfapi: Closed the logfile fd and initialize to NULL in glfs_finiPoornima G2013-12-262-1/+36
| | | | | | | | | | | | | | | | | | Currently if logfile is closed and other threads call gf_log after glfs_fini() is executed, it may lead to memory corruption. Adding gf_log_fini() which closes the logfile and initializes the logfile to NULL, thus any further logging happens to stderr. Also added gf_log_globals_fini() which should be filled in the future to release all the logging resources. Change-Id: I879163e1a3636e65300d166f782517ee773cab65 BUG: 1030228 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/6552 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* pathinfo: Provide user namespace access.Vijaykumar M2013-12-161-3/+6
| | | | | | | | | | | | | | | | | Locality can be now queried by unprivileged users with key "glusterfs.pathinfo". Setting both "glusterfs.pathinfo" and "trusted.glusterfs.pathinfo" on disk is prevented with this patch. Original Author: Vijay Bellur <vbellur@redhat.com> Change-Id: I4f7a0db8ad59165c4aeda04b23173255157a8b79 Signed-off-by: Vijaykumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/5101 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/geo-rep: more glusterd and cli fixes for geo-rep.Ajeet Jha2013-12-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | -> handle option validation cases in reset case. -> Creating valid conf path when glusterd restarts. -> Reading the gsyncd worker thread status and displaying it. -> Displaying status-detail per worker. -> Fetch checkpoint info in geo-rep status. -> use-tarssh value validation added. misc: misc geo-rep fixes based on cluster, logrotate etc.. -> cluster/dht: fix 'stime' getxattr getting overwritten. -> cluster/afr: return max of 'stime' values in subvol. -> geo-rep-logrotate: Sending SIGHUP to geo-rep auxiliary. -> cluster/dht: fix convoluted logic while aggregating. -> cluster/*: fix 'stime' min/max fetch logic. Change-Id: I811acea0bbd6194797a3e55d89295d1ea021ac85 BUG: 1036552 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/6405 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs: Explicitly open /dev/stderr logfileBharata B Rao2013-12-101-3/+1
| | | | | | | | | | | | | | | | Currently if stderr is specified as logfile, /dev/stderr isn't opened but stderr is directly used. However libgfapi closes the logfile (and hence stderr) from glfs_fini() which results in stderr becoming unavailable for the application that links to libgfapi. Prevent this unexpected behaviour for the application by explicitly opening /dev/stderr like it is done for any other logfile. Change-Id: I76b754598a2acf40b91ff0461726c5918e278c84 BUG: 1038924 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-on: http://review.gluster.org/6452 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs: Free IP address string in gf_is_local_addr()Vijay Bellur2013-12-051-2/+5
| | | | | | | | | | Change-Id: Ib113de269134c907aa2f35459e2764c142b94477 BUG: 1032122 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6433 Tested-by: Lukáš Bezdička <lukas.bezdicka@gooddata.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: Inconsistent behaviour of setfacl/getfaclSantosh Kumar Pradhan2013-12-031-2/+23
| | | | | | | | | | | | | | The permissions returned by NFS ACL are wrong, which are rejected by NFS client as "Invalid argument". Refactor the NFS ACL code to return the proper permissions which would match with the requested permissions. Change-Id: I409a6600538a90f2c5c2e8d84657c3b508468fe6 BUG: 1035218 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6368 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli, glusterd: More quota fixes ...Krutika Dhananjay2013-11-302-73/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... which may be grouped under the following categories: 1. Fix incorrect cli exit status for 'quota list' cmd 2. Print appropriate error message on quota parse errors in cli Authored by: Anuradha Talur <atalur@redhat.com> 3. glusterd: Improve quota validation during stage-op 4. Fix peer probe issues resulting from quota conf checksum mismatches 5. Enhancements to CLI output in the event of quota command failures Authored by: Kaushal Madappa <kmadappa@redhat.com> 7. Move aux mount location from /tmp to /var/run/gluster Authored by: Krishnan Parthasarathi <kparthas@redhat.com> 8. Fix performance issues in quota limit-usage Authored by: Krutika Dhananjay <kdhananj@redhat.com> Note: Some functions that were used in earlier version of quota, that aren't called anymore have been removed. Change-Id: I9d874f839ae5fdcfbe6d4f2d727eac091f27ac57 BUG: 969461 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6366 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* iobufs: make iobref container size dynamicAnand Avati2013-11-263-8/+49
| | | | | | | | | | | | | | | With gfapi we can receive read/write size beyond the natural limits of FUSE and NFS server. iobref was hardcoded to hold iobuf refs up to 16 in count, which imposes a natural limit of 2MB with 128KB page sizes of read-ahead and io-cache. Fix this by making iobref's iobuf ref container size dynamic. Change-Id: I93d88104d6c5e7af96cc9f1bfcc870d80fa81dad BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6348 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* socket: limit vector count to IOV_MAXAnand Avati2013-11-261-0/+3
| | | | | | | | | | | | | IOV_MAX is the maximum supported vector count on a given platform. Limit the count to IOV_MAX if higher. As we are performing non-blocking IO getting a smaller return value is handled naturally. Change-Id: I94ef67a03ed0e10da67a776af2b55506bf721611 BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6354 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* cluster/dht: instruct marker whenever it shouldn't do accountingRaghavendra G2013-11-261-0/+1
| | | | | | | | | | | | | | | | | | This is needed for two reasons: * since dht-linkfiles are internal, they shouldn't be accounted. * hardlink handling in marker is broken. link/unlink of hardlinks present in same directory can break marker accounting. Hence, if src and dst are in same directory in case of rename, dht - if it breaks rename into link/unlink operations - should instruct marker to not to do accounting. Change-Id: I9c9f7384569f75a2792f6450ee7a5279bf751ae7 BUG: 1022995 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6203 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: add dht_is_linkfile helper procedure.Raghavendra G2013-11-263-0/+48
| | | | | | | | | | | | | | components other than distribute (like marker to exclude linkfiles from being accounted) also need awareness of what constitutes a linkfile. Hence its good to separate out this functionality into core. Change-Id: Ib944eeacc991bb1de464c9e73ee409fc7a689ff1 BUG: 1022995 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6152 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli/glusterd: Changes to quota command Quota featureRaghavendra G2013-11-262-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | re-work. Following are the cli commands that are new/re-worked: ====================================================== volume quota <VOLNAME> {enable|disable|list [<path> ...]|remove <path>| default-soft-limit <percent>} | volume quota <VOLNAME> {limit-usage <path> <size> [<percent>]} | volume quota <VOLNAME> {alert-time|soft-timeout|hard-timeout} {<time>} volume status [all | <VOLNAME> [nfs|shd|<BRICK>|quotad]] [detail|clients|mem|inode|fd|callpool] volume statedump <VOLNAME> [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history] glusterd changes: ================= * Quota limits are now set as extended attributes by glusterd from the aux mount created by the cli. * The gfids of the directories on which quota limits are set for a given volume are stored in /var/lib/glusterd/vols/<volname>/quota.conf file in binary format, and whose cksum and version is stored in /var/lib/glusterd/vols/<volname>/quota.cksum. Original-author: Krutika Dhananjay <kdhananj@redhat.com> Original-author: Krishnan Parthasarathi <kparthas@redhat.com> BUG: 969461 Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6003 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/quota: Improvements to quotaRaghavendra G2013-11-269-6/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Two stages of quota enforcement is done: Soft and hard quota Upon reaching soft quota limit on the directory it logs/alerts in the quota daemon log (ie DEFAULT_LOG_DIR/quotad.log) and no more writes allowed after hard quota limit. After reaching the soft-limit the daemon alerts the user/admin repeatively for every 'alert-time', which is configurable. * Quota enforcer is moved to server-side. It takes care of enforcing quota. Since enforcer doesn't have the cluster view, it relies on another service called quota-aggregator. Aggregator, on query can return the size of a directory based on the cluster view. Enforcer is always loaded in the server graph and is by passed if the feature is not enabled. Options specific to enforcer: server-quota - Specifies whether the feature is on/off. It is used to by pass the quota if turned off. deem-statfs - If set to on, it takes quota limits into consideration while estimating fs size. (df command). The algorithm followed is, i. Adjust statvfs based on limit configured on root. ii. If limit is set on the inode passed, use size/limits on that inode to populate statvfs. Otherwise, use size/limits configured on root. iii. Upon statvfs, update the ctx->size on the inode. iv. Don't let DHT aggregate, instead take the maximum of the usages from the subvols of the DHT, since each of it contains the complete information. Enforcer also makes use of gfid-to-path conversion functionality to work correctly when a client like nfs predominently relies on nameless lookups. * Quota Aggregator acts as a thin client to provide cluster view Its a lightweight *gluster client* process with no mount point, started upon enabling quota or restarting the volume. This is a single process run on each brick, which can answer queries on all volumes in the cluster. Its volfile stored in GLUSTERD_DEFAULT_WORKING_DIR/quotad/quotad.vol. Credits: Raghavendra Bhat <rabhat@redhat.com> Varun Shastry <vshastry@redhat.com> Shishir Gowda <sgowda@redhat.com> Kruthika Dhananjay <kdhananj@redhat.com> Brian Foster <bfoster@redhat.com> Krishnan Parthasarathi <kparthas@redhat.com> Change-Id: Id1cb25b414951da34c665a55f77385d482e0f9de BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/5952 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* posix: placeholders for GFID to path conversionRaghavendra G2013-11-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | what? ===== The following is an attempt to generate the paths of a file when only its gfid is known. To find the path of a directory, the symlink handle to the directory maintained in the ".glusterfs" backend directory is read. The symlink handle is generated using the gfid of the directory. It (handle) contains the directory's name and parent gfid, which are used to recursively construct the absolute path as seen by the user from the mount point. A similar approach cannot be used for a regular file or a symbolic link since its hardlink handle, generated using its gfid, doesn't contain its parent gfid and basename. So xattrs are set to store the parent gfids and the number of hardlinks to a file or a symlink having the same parent gfid. When an user/application requests for the paths of a regular file or a symlink with multiple hardlinks, using the parent gfids stored in the xattrs, the paths of the parent directories are generated as mentioned earlier. The base names of the hardlinks (with the same parent gfid) are determined by matching the actual backend inode numbers of each entry in the parent directory with that of the hardlink handle. Xattr is set on a regular file, link, and symbolic link as follows, Xattr name : trusted.pgfid.<pargfidstr> Xattr value : <number of hardlinks to a regular file/symlink with the same parentgfid> If a regular file, hard link, symbolic link is created then an xattr in the above format is set in the backend. how to use? =========== This functionality can be used through getxattr interface. Two keys - glusterfs.ancestry.dentry and glusterfs.ancestry.path - enable usage of this functionality. A successful getxattr will have the result stored under same keys. Values will be, glusterfs.ancestry.dentry: -------------------------- A linked list of gf-dirent structures for all possible paths from root to this gfid. If there are multiple paths, the linked-list will be a series of paths one after another. Each path will be a series of dentries representing all components of the path. This key is primarily for internal usage within glusterfs. glusterfs.ancestry.path: ------------------------ A string containing all possible paths from root to this gfid. Multiple hardlinks of a file or a symlink are displayed as a colon seperated list (this could interfere with path components containing ':'). e.g. If there is a file "file1" in root directory with two hardlinks, "/dir2/link2tofile1" and "/dir1/link1tofile1", then [root@alpha gfsmntpt]# getfattr -n glusterfs.ancestry.path -e text file1 glusterfs.ancestry.path="/file1:/dir2/link2tofile1:/dir1/link1tofile1" Thanks Amar, Avati and Venky for the inputs. Original Author: Ramana Raja <rraja@redhat.com> BUG: 990028 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I0eaa9101e333e0c1f66ccefd9e95944dd4a27497 Reviewed-on: http://review.gluster.org/5951 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* fuse: revalidate group id cache on uid/gid change detectionAnand Avati2013-11-212-2/+18
| | | | | | | | | | | | | | | | | | | - Remember the uid and gid of the pid at the time of caching the group id list. - Next time when referring to the cache confirm that uid and gid of that pid has not changed since. If it has, treat it like a timeout/cache miss. - Solves group id caching issue caused when Samba runs on gluster FUSE mount and changes the uid/gid on a per syscall basis. Change-Id: I3382b037ff0b6d5eaaa36d9c898232543475aeda BUG: 1032438 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6320 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* syncops: expose @flags in syncop_rmdir()Anand Avati2013-11-212-3/+3
| | | | | | | | | Change-Id: I9b73c1db728e4cb3948fc118cceb292b21d48b96 BUG: 1021686 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6112 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* libglusterfs: use correct check for linux falloc.h availabilityBrian Foster2013-11-201-2/+11
| | | | | | | | | | | | We should check for HAVE_LINUX_FALLOC_H rather than HAVE_FALLOC_H to determine whether to include linux/falloc.h. Change-Id: I05eca4de2893a88d6b9cc5ebfce738708b9960d4 BUG: 1032378 Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/6314 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* mount/fuse: handle --gid-timeout=0 properlyAnand Avati2013-11-201-0/+1
| | | | | | | | | | | | | | Fix the bug which was using the timeout value as a flag to indicate if it was set (and hence would fail when timeout=0 would evaluate as False) Change-Id: Ie9a8f28d35603458cdac26c9a4e0343e7eda7344 BUG: 1032438 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6308 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* NetBSD missing backtrace(3) portability fixEmmanuel Dreyfus2013-11-192-1/+58
| | | | | | | | | | | | Implement backtrace(3) and backtrace_symbols(3) which do not exist in NetBSD While there, remove duplicate #include <stdio.h> BUG: 764655 Change-Id: Iccd695765906e085c3f8fcb670506d4fea68fa39 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6285 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* zerofill: Change the type of len argument of glfs_zerofill() to off_tBharata B Rao2013-11-147-9/+9
| | | | | | | | | | | | | | glfs_zerofill() can be potentially called to zero-out entire file and hence allow for bigger value of length parameter. Change-Id: I75f1d11af298915049a3f3a7cb3890a2d72fca63 BUG: 1028673 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-on: http://review.gluster.org/6266 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: M. Mohan Kumar <mohan@in.ibm.com> Tested-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: RFE for NFS connection behaviorSantosh Kumar Pradhan2013-11-142-0/+16
| | | | | | | | | | | | | | | Implement reconfigure() for NFS xlator so that volume set/reset wont restart the NFS server process. But few options can not be reconfigured dynamically e.g. nfs.mem-factor, nfs.port etc which needs NFS to be restarted. Change-Id: Ic586fd55b7933c0a3175708d8c41ed0475d74a1c BUG: 1027409 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6236 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs/inode: introduce new APIs for ctx handlingAmar Tumballi2013-11-132-20/+264
| | | | | | | | | | | | | | * inode_ctx_reset{0,1,2}() for reseting value1, value2, and both respectively * inode_ctx_get0() - to get the first value only * inode_ctx_set0() - to set the first value only * inode_ctx_get1() - to get the second value only * inode_ctx_set1() - to set the second value only Change-Id: I4dfbdac81d6a3f4e5784e060c76edabb1692ce03 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.org/5890 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* bd: Add BD support to other xlatorsM. Mohan Kumar2013-11-131-0/+4
| | | | | | | | | | | | | | | | Make changes to distributed xlator to work with BD xlator. Unlike files, a block device can't be removed when its opened. So some part of the code were moved down to avoid this situation. Also before truncating a BD file its BD_XATTR should be set otherwise truncate will result in truncating posix file. So file is created with needed BD_XATTR and truncate is invoked. Also enables BD xlator in stripe volume type. Change-Id: If127516e261fac5fc5b137e7fe33e100bc92acc0 BUG: 1028672 Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5235 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* bd_map: Remove bd_map xlatorM. Mohan Kumar2013-11-132-24/+0
| | | | | | | | | | | Remove bd_map xlator and CLI related changes. Change-Id: If7086205df1907127c1a1fa4ba603f1c48421d09 BUG: 1028672 Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5747 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: zerofill supportM. Mohan Kumar2013-11-1010-0/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in the specified range. This fop will be useful when a whole file needs to be initialized with zero (could be useful for zero filled VM disk image provisioning or during scrubbing of VM disk images). Client/application can issue this FOP for zeroing out. Gluster server will zero out required range of bytes ie server offloaded zeroing. In the absence of this fop, client/application has to repetitively issue write (zero) fop to the server, which is very inefficient method because of the overheads involved in RPC calls and acknowledgements. WRITESAME is a SCSI T10 command that takes a block of data as input and writes the same data to other blocks and this write is handled completely within the storage and hence is known as offload . Linux ,now has support for SCSI WRITESAME command which is exposed to the user in the form of BLKZEROOUT ioctl. BD Xlator can exploit BLKZEROOUT ioctl to implement this fop. Thus zeroing out operations can be completely offloaded to the storage device , making it highly efficient. The fop takes two arguments offset and size. It zeroes out 'size' number of bytes in an opened file starting from 'offset' position. This patch adds zerofill support to the following areas: - libglusterfs - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi Client applications can exloit this fop by using glfs_zerofill introduced in libgfapi.FUSE support to this fop has not been added as there is no system call for this fop. Changes from previous version 3: * Removed redundant memory failure log messages Changes from previous version 2: * Rebased and fixed build error Changes from previous version 1: * Rebased for latest master TODO : * Add zerofill support to trace xlator * Expose zerofill capability as part of gluster volume info Here is a performance comparison of server offloaded zeofill vs zeroing out using repeated writes. [root@llmvm02 remote]# time ./offloaded aakash-test log 20 real 3m34.155s user 0m0.018s sys 0m0.040s [root@llmvm02 remote]# time ./manually aakash-test log 20 real 4m23.043s user 0m2.197s sys 0m14.457s [root@llmvm02 remote]# time ./offloaded aakash-test log 25; real 4m28.363s user 0m0.021s sys 0m0.025s [root@llmvm02 remote]# time ./manually aakash-test log 25 real 5m34.278s user 0m2.957s sys 0m18.808s The argument log is a file which we want to set for logging purpose and the third argument is size in GB . As we can see there is a performance improvement of around 20% with this fop. Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18 BUG: 1028673 Signed-off-by: Aakash Lal Das <aakash@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5327 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: fix bug in timespec adjustmentRavishankar N2013-11-103-6/+6
| | | | | | | | | | | | | The argument to the timespec_adjust_delta() function introudced in commit 6836118b21 needs to be passed by reference rather than by value for the function to do it's job. BUG: 1028663 Change-Id: I62a3636906e67ed35b7786e9553f6819b48f3626 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/6243 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* client_t: phase 2, refactor server_ctx and locks_ctx outKaleb S. KEITHLEY2013-10-318-348/+143
| | | | | | | | | | | | | | remove server_ctx and locks_ctx from client_ctx directly and store as into discrete entities in the scratch_ctx hooking up dump will be in phase 3 BUG: 849630 Change-Id: I94cea328326db236cdfdf306cb381e4d58f58d4c Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5678 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Rectify the guard macro name of glusterfs-acl.hSantosh Kumar Pradhan2013-10-211-4/+4
| | | | | | | | | Change-Id: I13bc7626c7f852647a75e3d5e397d2cd55757932 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6117 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* libglusterfs: Propositions should be logicalHarshavardhana2013-10-212-20/+20
| | | | | | | | | | | | | Mutually exclusive tests shouldn't be non-contradictory -- (A is B) && (A is not B) is not valid Change-Id: Icf97d1704fedca4b8eeeb67da8b7d4c8d4b578d5 BUG: 769692 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6115 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs: Return 'ERANGE' for ASCII string to number systemHarshavardhana2013-10-171-2/+7
| | | | | | | | | | | | | Using 'EOVERFLOW' should be limited to data structure alignments not Number systems. Change-Id: I7d337d414e998c0a729c95661df239e36c753a38 BUG: 1017746 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6101 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Changes to cli-glusterd communicationKaushal M2013-10-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Glusterd changes: With this patch, glusterd creates a socket file in DATADIR/run/glusterd.socket , and listen on it for cli requests. It listens for 2 rpc programs on the socket file, - The glusterd cli rpc program, for all cli commands - A reduced glusterd handshake program, just for the 'system:: getspec' command The location of the socket file can be changed with the glusterd option 'glusterd-sockfile'. To retain compatibility with the '--remote-host' cli option, glusterd also listens for the cli requests on port 24007. But, for the sake of security, it listens using a reduced cli rpc program on the port. The reduced rpc program only contains read-only procs used for 'volume (info|list|status)', 'peer status' and 'system:: getwd' cli commands. CLI changes: The gluster cli now uses the glusterd socket file for communicating with glusterd by default. A new option '--gluster-sock' has been added to allow specifying the sockfile used to connect. Using the '--remote-host' option will make cli connect to the given host & port. Tests changes: cluster.rc has been modified to make use of socket files and use different log files for each glusterd. Some of the tests using cluster.rc have been fixed. Change-Id: Iaf24bc22f42f8014a5fa300ce37c7fc9b1b92b53 BUG: 980754 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5280 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Add monotonic clocking counter for timer threadHarshavardhana2013-10-155-18/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs: Account for overflow in gf_string2bytesizeKaushal M2013-10-141-0/+6
| | | | | | | | | | | | | gf_string2bytesize will now return an error when a value is greater than UINT64_MAX and set errno to EOVERFLOW. This is needed because casting a double value greater than UINT64_MAX to uint64_t will convert it to 0. BUG: 1017746 Change-Id: I6f96efc1e3a1c236685593a6fb7f806a87e46019 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6068 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: [Feature] Command implementation to get heal-countVenkatesh Somyajulu2013-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently to know the number of files to be healed, either user has to go to backend and check the number of entries present in indices/xattrop directory. But if a volume consists of large number of bricks, going to each backend and counting the number of entries is a time-taking task. Otherwise user can give gluster volume heal vol-name info command but with this approach if no. of entries are very hugh in the indices/ xattrop directory, it will comsume time. So as a feature, new command is implemented. Command 1: gluster volume heal vn statistics heal-count This command will get the number of entries present in every brick of a volume. The output displays only entries count. Command 2: gluster volume heal vn statistics heal-count replica 192.168.122.1:/home/user/brickname Here if we are concerned with just one replica. So providing any one of the brick of a replica will get the number of entries to be healed for that replica only. Example: Replicate volume with replica count 2. Backend status: -------------- [root@dhcp-0-17 xattrop]# ls -lia | wc -l 1918 NOTE: Out of 1918, 2 entries are <xattrop-gfid> dummy entries so actual no. of entries to be healed are 1916. [root@dhcp-0-17 xattrop]# pwd /home/user/2ty/.glusterfs/indices/xattrop Command output: -------------- Gathering count of entries to be healed on volume volume3 has been successful Brick 192.168.122.1:/home/user/22iu Status: Brick is Not connected Entries count is not available Brick 192.168.122.1:/home/user/2ty Number of entries: 1916 Change-Id: I72452f3de50502dc898076ec74d434d9e77fd290 BUG: 1015990 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr : Implementation of command "gluster volume heal vn statistics"Venkatesh Somyajulu2013-10-144-10/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "gluster volume heal volumename statistics" command gives the summary of the afr crawl done based on the entries present in the xattrop directory. Whenever afr crawls are attempted, the beginning time of crawl, end time of crawl, no of files healed, heal-failed count and number of files in split brain are shown along with the type of the crawl. If crawl is already in progress then it will give the number of files healed, heal failed count and number of files in split-brain from the beginning of the crawl and instead of telling the end time of the crawl, "CRAWL IN PROGRESS" message will be shown. Output format: command: "gluster volume heal volume-name statistics" Output: Gathering afr crawl statistics crawl statistics on volume volume-name has been successful ------------------------------------------------ Crawl statistics for brick no 0 Hostname of brick 192.168.122.248 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 ------------------------------------------------ Crawl statistics for brick no 1 Hostname of brick 192.168.122.1 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 -------------------------------------------------- Change-Id: I10bf9d10b005741db9973fb1352e0dd59ed99aa9 BUG: 949400 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4790 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gfapi: object handle based API extensionsR.Shyamsundar2013-10-115-20/+278
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an ongoing effort to integrate NFS Ganesha ( https://github.com/nfs-ganesha/nfs-ganesha/wiki ) with GlusterFS as one of the file system back ends. Towards this we need extensions to gfapi that can handle object based operations. Meaning, instead of using full paths or relative paths from cwd, it is required that we can work with APIs, like the *at POSIX variants, to be able to create, lookup, open etc. files and directories. Hence the objects are the files or directories themselves and we give out handles to these objects that can be used for further operations. This code drop is an initial implementation of the proposed APIs. The new APIs are implemented as glfs_h_XXX variants in the file glfs-handleops.c to mirror glfs-fops.c style. The code leverages holding onto inode references and doling these out as opaque/cookie type objects to the callers, to enable them to be used as handles in other operations. An fd based approach was considered, but due to the extra footprint that the fd structure and its counterparts would incur, this was dropped to take the approach of holding inode references themselves. Tested by extending glfsxmp.c to invoke and exercise the added APIs, and further tested with a reference integration of the same as an FSAL with NFS Ganesha. Change-Id: I23629c99e905b54070fa2e6565147812e5f3fa5d BUG: 1016000 Signed-off-by: R.Shyamsundar <srangana@redhat.com> Reviewed-on: http://review.gluster.org/5936 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfsd, libgfapi: destroy the temporary graphs constructed for comparisonRaghavendra Bhat2013-10-034-17/+219
| | | | | | | | | | | | | | * The new and the oldgraphs which have been constructed whenever there is a volfile change (either reconfigure of the existing graph or creating a new graph) for comparison should be freed. Otherwise frequent graph changes will lead to huge memory leak Change-Id: I4faddb1aa9393b34cd2de6732e537a60f600026a BUG: 948178 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/5388 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs: add glusterfs-acl.h to Makefile.amAnand Avati2013-09-301-1/+1
| | | | | | | | | | | | Without this, glusterfs-acl.h is left out of 'make dist' and building RPM fails. Change-Id: I5dc9dc8eecdea4c4c0d06f0b3da23bd2df4e944e Signed-off-by: Anand Avati <avati@redhat.com> BUG: 1009210 Reviewed-on: http://review.gluster.org/6015 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gNFS: Incorrect NFS ACL encoding for XFSSantosh Kumar Pradhan2013-09-292-3/+81
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Incorrect NFS ACL encoding causes "system.posix_acl_default" setxattr failure on bricks on XFS file system. XFS (potentially others?) doesn't understand when the 0x10 prefix is added to the ACL type field for default ACLs (which the Linux NFS client adds) which causes setfacl()->setxattr() to fail silently. NFS client adds NFS_ACL_DEFAULT(0x1000) for default ACL. FIX: Mask the prefix (added by NFS client) OFF, so the setfacl is not rejected when it hits the FS. Original patch by: "Richard Wareing" Change-Id: I17ad27d84f030cdea8396eb667ee031f0d41b396 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/5980 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: block unused signals in created threadsAnand Avati2013-09-254-5/+35
| | | | | | | | | | | | | | | Block all signal except those which are set for explicit handling in glusterfs_signals_setup(). Since thread spawning code in libglusterfs and xlators can get called from application threads when used through libgfapi, it is necessary to do this blocking. Change-Id: Ia320f80521a83d2edcda50b9ad414583a0175281 BUG: 1011662 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5995 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-19 17:44:09 +0000