summaryrefslogtreecommitdiffstats
path: root/libglusterfs
Commit message (Collapse)AuthorAgeFilesLines
* feature/geo-rep: Keep marker.tstamp's mtime unchangeable during snapshot.Kotresh H R2014-09-082-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Geo-replicatoin does a full xsync crawl after snapshot restoration of slave and master. It does not do history crawl. Analysis: Marker creates 'marker.tstamp' file when geo-rep is started for the first time. The virtual extended attribute 'trusted.glusterfs.volume-mark' is maintained and whenever it is queried on gluster mount point, marker fills it on the fly and returns the combination of uuid, ctime of marker.tstamp and others. So ctime of marker.tstamp, in other sense 'volume-mark' marks the geo-rep start time when the session is freshly created. From the above, after the first filesystem crawl(xsync) is done during first geo-rep start, stime should always be less than 'volume-mark'. So whenever stime is less than volume-mark, it does full filesystem crawl (xsync). Root Cause: When snapshot is restored, marker.tstamp file is freshly created losing the timestamps, it was originally created with. Solution: 1. Change is made to depend on mtime instead of ctime. 2. mtime and atime of marker.tstamp is restored back when snapshot is created and restored. BUG: 1138952 Change-Id: I0e19e1cb2593171b9a2b41d0d303330feb7fd2b3 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8401 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/8642
* features/changelog: Capture "correct" internal FOPsVenky Shankar2014-09-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes changelog capturing internal FOPs in a cascaded setup, where the intermediate master would record internal FOPs (generated by DHT on link()/rename()). This is due to I/O happening on the intermediate slave on geo-replication's auxillary mount with client-pid -1. Currently, the internal FOP capturing logic depends on client pid being non-negative and the presence of a special key in dictionary. Due to this, internal FOPs on an inter-mediate master would be recorded in the changelog. Checking client-pid being non-negative was introduced to capture AFR self-heal traffic in changelog, thereby breaking cascading setups. By coincidence, AFR self-heal daemon uses -1 as frame->root->pid thereby making is hard to differentiate b/w geo-rep's auxillary mount and self-heal daemon. BUG: 1138952 Change-Id: Ia08a2cfa3b02bb785f343794f5b2695d44398c4c Original-Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8347 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/8638
* Always check for ENODATA with ENOATTREmmanuel Dreyfus2014-09-071-0/+6
| | | | | | | | | | | | | | | | | | | | Linux defines ENODATA and ENOATTR with the same value, which means that code can miss on on the two without breaking. FreeBSD does not have ENODATA and GlusterFS defines it as ENOATTR just like Linux does. On NetBSD, ENODATA != ENOATTR, hence we need to check for both values to get portable behavior. This is a backport of I003a3af055fdad285d235f2a0c192c9cce56fab8 BUG: 1138897 Change-Id: I272cd53e637993c7fd2ac74bd607001d3581ced7 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8634 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-09-033-4/+8
| | | | | | | | | | | | | | | | | | | | | | | Backport from master branch - http://review.gluster.org/#/c/8246/ - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I06e684ac4c26d1e74c9daf76753403ad15f79276 BUG: 1130308 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8486 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* porting: extattr_remove_fd() doesn't existHarshavardhana2014-07-211-1/+1
| | | | | | | | | | Fix typo extattr_remove_fd() --> extattr_delete_fd() Change-Id: I0dc3399722eb272d3c04836726e22b212ef15eba BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8335 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Improvements to peer identificationKaushal M2014-07-152-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves the peer identification mechanism in glusterd and lays down the framework for further improvements, including better multi network support in glusterd. This patch mainly does two things, 1. Extend the peerinfo object to store a list of addresses instead of a single hostname as it does now. This also includes changes to make the peer update behaviour of 'peer probe' to add to the list. 2. Improve glusterd_friend_find_by_hostname() to perform better matching of hostnames. glusterd_friend_find_by_hostname() now does and initial quick string compare against all the peer addresses known to glusterd, after which it tries a more thorough search using address resolution and matching the struc sockaddr's. The above two changes together improve the peer identification situation in glusterd a lot. More information regarding the problem this patch attempts to resolve and the approach chosen can be found at http://www.gluster.org/community/documentation/index.php/Features/Better_peer_identification This commit is a squashed commit of the following changes, the development branch of which can be viewed at, https://github.com/kshlm/glusterfs/tree/better-peer-identification or, https://forge.gluster.org/~kshlm/glusterfs-core/kshlms-glusterfs/commits/better-peer-identification commit 198f86e60fab74faf082eaa02657a4d8f60b92f0 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 14:34:06 2014 +0530 Update gluster.8 commit 35d597f3a6b3248373e727f7b7e889c92554d56c Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 09:01:01 2014 +0530 Address review comments https://review.gluster.org/#/c/8238/3 commit 47b5331e17304477322bd2daed5bbed503c34ca1 Merge: c71b12c 78128af Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 08:41:39 2014 +0530 Merge branch 'master' into better-peer-identification commit c71b12c164330e8d19d1df4734ab34ef9a8caad2 Merge: 57bc9de 0f5719a Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 19:50:19 2014 +0530 Merge branch 'master' into better-peer-identification commit 57bc9de9e4f49ff2b1620df9906cda50a3527a25 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 19:49:08 2014 +0530 More fixes to review comments commit 5482cc363a687a9e246a0780ec88acd53e218501 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 18:36:40 2014 +0530 Code refactoring in peer-utils based on review comments https://review.gluster.org/#/c/8238/2/xlators/mgmt/glusterd/src/glusterd-peer-utils.c commit 89b22c34757178f64d5fbaffa31e6302f841c060 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 12:30:00 2014 +0530 Hostnames in peer status commit 63ebf9485cf50d736cf640238a1ab241671fcaf1 Merge: c8c8fdd f5f9721 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 12:06:33 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit c8c8fdd2104b5b6b8a1af739b1dd952b74e6dd66 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 18:35:27 2014 +0530 Hostnames in xml output commit 732a92a0167ad7b1d70edbc35ebd8307c2766ae1 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 15:12:10 2014 +0530 Add hostnames to cli rsp dict during list-friends commit fcf43e3e317508f0c225024738a988a4af8e9205 Merge: c0e2624 72d96e2 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 12:53:03 2014 +0530 Merge branch 'master' into better-peer-identification commit c0e262416728a3c536a8347a216e471eb2251535 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 16:11:19 2014 +0530 Use list_for_each_entry_safe when cleaning peer hostnames commit 6132e60224eb592f3657e535a12a3e72c772da42 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 15:52:19 2014 +0530 Fix crash in gd_add_friend_to_dict commit 88ffa9a508fd5aac0b2a76e6e76487ce0cab786a Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 13:19:44 2014 +0530 gd_peerinfo_destroy -> glusterd_peerinfo_destroy commit 4b36930a715b1e13cd1a77d136ef1cf78a06d574 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 12:50:12 2014 +0530 More refactoring commit ee559b081d608c6501c10ae22166f26eeb65690e Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 12:14:40 2014 +0530 Major refactoring of code based on review comments at https://review.gluster.org/#/c/8238/1/xlators/mgmt/glusterd/src/glusterd-peer-utils.h commit e96dbc7bbb05fad2a9c424de41a394b8023fe48d Merge: 2613d1d 83c09b7 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 09:47:05 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 2613d1daebff0c56812de821c06ed4c16bb9d447 Merge: b242cf6 9a50211 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 15:28:57 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit b242cf66d95dd3dd5e3975aa430baa6bd74b8a29 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 15:08:18 2014 +0530 Fix a silly mistake, if (ctx->req) => if (ctx->req == NULL) commit c835ed26433830ceed57289143f596cf60421558 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 14:58:23 2014 +0530 Fix reverse probe. commit 9ede17f9329b854b02e8ad159f173244789fd08c Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 13:31:32 2014 +0530 Fix friend import for existing peers commit 891bf74c7350064dfb008d1b7294bcec28d680fd Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 13:08:36 2014 +0530 Set first hostname in peerinfo->hostnames to peerinfo->hostname commit 9421d6a217381a7427a7d84f369280883ca4297a Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 12:21:40 2014 +0530 Fix gf_asprintf return val check in glusterd_store_peer_write commit defac978c1d94011ce8195e311839b9ffce057e7 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 11:16:13 2014 +0530 Fix store_retrieve_peers to correctly cleanup. commit 00a799f5de1121b0cb7421da8285f9407063e1bd Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 10:52:11 2014 +0530 Update address list in glusterd_probe_cbk only when needed. commit 7a628e8a9c562d85709c69cfa13fb1774c521b75 Merge: d191985 dc46d5e Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 09:24:12 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit d1919858e6639d2b54d716a61f662d9752ec5ff1 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:59:49 2014 +0530 gf_compare_addrinfo -> gf_compare_sockaddr commit 31d8ef730d408f8d9ba8f504fa648f7dcd59da87 Merge: 93bbede 86ee233 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:16:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 93bbedeac5181e29f59b2acd08f638146812ec41 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:15:16 2014 +0530 Improve glusterd_friend_find_by_hostname glusterd_friend_find_by_hostname will now do an initial quick search for the peerinfo performing string comparisions on the given host string. It follows it with a more thorough match, by resolving the addresses and comparing addrinfos instead of strings. commit 2542cdbc45aa9cfcaf1f174686158d5565cdd07b Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 17:21:10 2014 +0530 New utility gf_compare_addrinfo commit 338676e8389a44bd91136eebd110197429c2566c Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 14:55:56 2014 +0530 Use gd_peer_has_address instead of strcmp commit 28d45be51f594328741c44455bd80ac9d64ca501 Merge: 728266e 991dd5e Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 14:54:40 2014 +0530 Merge branch 'master' into better-peer-identification commit 728266eb16d5f5a4bf36266044425ae164337f99 Merge: 7d9b87b 2417de9 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 09:55:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 7d9b87b84955ec17daeaf88a3e7462914039430f Merge: b890625 e02275c Author: Kaushal M <kshlmster@gmail.com> Date: Tue Jul 1 08:41:40 2014 +0530 Merge pull request #4 from vpshastry/better-peer-identification Better peer identification commit e02275c52fb83c72ad082c098fd3e432c2b9c526 Merge: 75ee90d b890625 Author: Varun Shastry <vshastry@redhat.com> Date: Mon Jun 30 16:44:29 2014 +0530 Merge branch 'better-peer-identification' of https://github.com/kshlm/glusterfs into better-peer-identification-kaushal-github commit 75ee90d2f272e49b94d24c9ca4571e89a83055ff Author: Varun Shastry <vshastry@redhat.com> Date: Mon Jun 30 15:36:10 2014 +0530 glusterd: add to the list if the probed uuid pre-exists Signed-off-by: Varun Shastry <vshastry@redhat.com> commit b890625d8164c660695daef3285c67979eef723e Merge: 04c5d60 187a7a9 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jun 30 11:44:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 04c5d60cb938c8d94b214689580b40abb1b0ffcd Merge: 3a5bfa1 e01edb6 Author: Kaushal M <kshlmster@gmail.com> Date: Sat Jun 28 19:23:33 2014 +0530 Merge pull request #3 from vpshastry/better-peer-identification glusterd: search through the list of hostnames in the peerinfo commit 0c64f3346a977f9165ac55a84a1e03c40a7573a7 Merge: e01edb6 3a5bfa1 Author: Varun Shastry <vshastry@redhat.com> Date: Sat Jun 28 10:43:29 2014 +0530 Merge branch 'better-peer-identification' of https://github.com/kshlm/glusterfs into better-peer-identification-kaushal-github commit e01edb63153a1008db70b8fa76ae5b535e099326 Author: Varun Shastry <vshastry@redhat.com> Date: Fri Jun 27 12:29:36 2014 +0530 glusterd: search through the list of hostnames in the peerinfo Signed-off-by: Varun Shastry <vshastry@redhat.com> commit 3a5bfa15855e660db2bfde644727371dd2d618cc Merge: cda6d31 371ea35 Author: Kaushal M <kshlmster@gmail.com> Date: Fri Jun 27 11:31:17 2014 +0530 Merge pull request #1 from vpshastry/better-peer-identification glusterd: Add hostname to list instead of replaceing upon update commit 371ea354f198b4182382d5403c5960c0b2add6b6 Author: Varun Shastry <vshastry@redhat.com> Date: Fri Jun 27 11:24:54 2014 +0530 glusterd: Add hostname to list instead of replaceing upon update Signed-off-by: Varun Shastry <vshastry@redhat.com> commit cda6d3152886623ecbf46baf0048ebe0119b30b6 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 19:52:52 2014 +0530 Import address lists commit 6649b54aa0440130c08e827e0a1d1bbfb840eca9 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 19:15:37 2014 +0530 Implement export address list commit 55990034eead92bc9b936240029e460a4bf152d5 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 18:11:59 2014 +0530 Use first address in list to when setting up the peer RPC. commit a35fde8d19b9988eb04c652fb3a5e4f84d90ad00 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 18:03:04 2014 +0530 Properly free addresses on glusterd_peer_destroy commit 1988081db09ac9205f3dc7268cef8be267f3ce8b Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 17:52:35 2014 +0530 Restore peerinfo with address list implemented. commit 66f524d5749a12f4910dd6b06c9d91f37e1d831e Author: Kaushal M <kaushal@redhat.com> Date: Mon Jun 23 13:02:23 2014 +0530 Move out all peer related utilities from glusterd-utils to glusterd-peer-utils commit 14a2a326a4dff11b55490dca2a14f39320931340 Author: Kaushal M <kaushal@redhat.com> Date: Tue May 27 12:16:41 2014 +0530 Compilation fix commit c59cd351d0a102d0d5f3ea9001fd33c4edcb262f Author: Kaushal M <kaushal@redhat.com> Date: Mon May 5 12:51:11 2014 +0530 Add store support for hostname list commit b70325f0beb884ad12645ef40185f0bf6cedd741 Author: Kaushal M <kaushal@redhat.com> Date: Fri May 2 15:58:07 2014 +0530 Add a hostnames list to glusterd_peerinfo_t glusterd_peerinfo_new will now init this list and add the given hostname as the lists first member. Signed-off-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Varun Shastry <vshastry@redhat.com> Change-Id: Ief3c5d6d6f16571ee2fab0a45e638b9d6506a06e BUG: 1119547 Reviewed-on: http://review.gluster.org/8238 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* socket/glusterd/client: enable SSL for managementJeff Darcy2014-07-101-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The feature is controlled by presence of the following file: /var/lib/glusterd/secure-access See the comment near the definition of SECURE_ACCESS_FILE in glusterfs.h for the rationale. With this enabled, the following rules apply to connections: UNIX-domain sockets never have SSL. Management-port sockets (both connecting and accepting, in daemons and CLI) have SSL based on presence of the file. Other IP sockets have SSL based on the existing client.ssl and server.ssl volume options. Transport multi-threading is explicitly turned off in glusterd (it would otherwise be turned on when SSL is) due to multi-threading issues. Tests have been elided to avoid risk of leaving a file which will cause all subsequent tests to run with management SSL still enabled. IMPLEMENTATION NOTE The implementation is a bit messy, and consists of two stages. First we decide whether to set the relevant fields in our context structure, based on presence of the sentinel file OR a command-line override. Later we decide whether a particular connection should actually use SSL, based on the context flags plus what kind of connection we're making[1] and what kind of daemon we're in[2]. [1] inbound, outbound to glusterd port, other outbound [2] glusterd, glusterfsd, other TESTING NOTE Instead of just running one special test for this feature, the ideal would be to run all tests with management SSL enabled. However, it would be inappropriate or premature to set up an optional feature in the patch itself. Therefore, the method of choice is to submit a separate patch on top, which modifies "cleanup" in include.rc to recreate the secure-access file and associated SSL certificate/key files before each test. Change-Id: I0e04d6d08163893e24ec8c031748c5c447d7f780 BUG: 1114604 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8094 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* client_t: Fix memory leaksPranith Kumar K2014-07-091-8/+19
| | | | | | | | | | | | | | | | | | | | | - Assign frame->root->client so that gf_client_unref happens in server_connection_cleanup_flush_cbk - Avoid taking extra ref in gf_client_get TODO: The whole reason why there are two types of refs bind, ref-count is to avoid lock inside lock which is not the case now. I will be sending one more patch which will accomplish that as well as changing the tablearray to list Change-Id: Ic9971cf248c5ee2cdbfdef8e9ff6d54e3ec60ced BUG: 1116672 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8247 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Changes in statedump for stack, frame, locksPranith Kumar K2014-07-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Internal call-stacks don't have lk-owner so it is a bit difficult to confirm if a stack hung by comparing two statedump files. This change prints call-stack, frame's address. This should solve the comparison problem. Lock times and log times don't have same timezone because of which one has to manually convert the times for debugging the issues. This change prints blocked, granted times also in UTC. Also fixed line truncation issue when client-unique-string is big. Change-Id: I116372c0d63476823a36ca6dbfba91648f9234cc BUG: 1114188 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8197 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* statedump: Don't print mem-type numbersPranith Kumar K2014-07-061-3/+3
| | | | | | | | | | | | Change-Id: I381bfa9535fe60c37758761d34b98dbbc4e5f569 BUG: 1114188 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8239 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: Justin Clift <justin@gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* porting: Provide fallocate and fremovexattr for OSXHarshavardhana2014-07-021-17/+53
| | | | | | | | | Change-Id: I563216f83edaff6d01a251ef0c1746a14aec700c BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8217 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* porting: Port for FreeBSD rebased from Mike Ma's effortsHarshavardhana2014-07-027-93/+40
| | | | | | | | | | | | | | | | | | | - Provides a working Gluster Management Daemon, CLI - Provides a working GlusterFS server, GlusterNFS server - Provides a working GlusterFS client - execinfo port from FreeBSD is moved into ./contrib/libexecinfo for ease of portability on NetBSD. (FreeBSD 10 and OSX provide execinfo natively) - More portability cleanups for Darwin, FreeBSD and NetBSD - Provides a new rc script for FreeBSD Change-Id: I8dff336f97479ca5a7f9b8c6b730051c0f8ac46f BUG: 1111774 Original-Author: Mike Ma <mikemandarine@gmail.com> Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8141 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* libglusterfs/client_t: cliententries are never expandedKaleb S. KEITHLEY2014-07-022-14/+31
| | | | | | | | | | | | | | clienttable->cliententries are never expanded once all the available entries have been used. Also removed a couple chatty log messages. Change-Id: Iff2d92fe1116cc6c6b72ff3d173aee26e69780ed BUG: 1113745 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/8184 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Ref root inode only oncePranith Kumar K2014-06-301-0/+16
| | | | | | | | | | Change-Id: I75f309fc1fabb17c392697205b2b5cae6d855e72 BUG: 1113437 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8182 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Fix multi-homed m/c issue in NFS subdir authSantosh Kumar Pradhan2014-06-252-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | NFS subdir authentication doesn't correctly handle multi-homed (host with multiple NIC having multiple IP addr) OR multi-protocol (IPv4 and IPv6) network addresses. When user/admin sets HOSTNAME in gluster CLI for NFS subdir auth, mnt3_verify_auth() routine does not iterate over all the resolved n/w addrs returned by getaddrinfo() n/w API. Instead, it just tests with the one returned first. 1. Iterate over all the n/w addrs (linked list) returned by getaddrinfo(). 2. Move the n/w mask calculation part to mnt3_export_fill_hostspec() instead of doing it in mnt3_verify_auth() i.e. calculating for each mount request. It does not change for MOUNT req. 3. Integrate "subnet support code rpc-auth.addr.<volname>.allow" and "NFS subdir auth code" to remove code duplication. Change-Id: I26b0def52c22cda35ca11766afca3df5fd4360bf BUG: 1102293 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/8048 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* libglusterfs: Don't allow '-0' as input value for numbersPranith Kumar K2014-06-221-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: io-stats tries to init log-buf-size as uint32. All gf_string2u*** functions which get the unsigned values from string don't want the string to contain '-'. So the GF_OPTION_INIT with '-0' as value fails init in io-stats, but by that time 'ret' is already reset to 0. Io-stats ends up returning 0 even when init failed. Because of this caller of init thinks initialization is successful when it is not. iostat_xlator->private is still NULL. Because of this when a fop tries to access members of io-stat-private structure, it crashes. Fix: I initially thought may be we should fix all gf_string2u*** functions to accept '-0'. But all these functions are used only for setting volume options. If we accept '-0', gluster volume info shows output as follows: diagnostics.brick-log-buf-size: -0 This seemed ugly, so I felt it is better to disallow '-0' as valid input for numbers. Also fixed return value in cases of failures in io-stats. Change-Id: I67ac92853b6d2be70516ad1d07505ffd9f058aa4 BUG: 1111557 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8129 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Cluster/DHT: New logging frameworkNithya Balachandran2014-06-161-0/+5
| | | | | | | | | | | | Moved all relevant DHT gf_log calls to the new logging framework. Change-Id: I3af3cfe0416e332774a6c4ff6a091d006c400af2 BUG: 1075611 Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/7929 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: No root squash for quota aux mount by defaultVarun Shastry2014-06-151-5/+6
| | | | | | | | | | | | | | | | | | With change 28209283a67f13802cc0c1d3df07c676926810a2, the root squash option is enabled by default even for the trusted clients. This disallowed quota auxiliary mount from setting the limit. This patch adds the quota aux mount process to list of 'special' clients which have the root squash disabled by default. Change-Id: Ie6583dd3deb170563daf001239c51bcff1ce078b BUG: 1104692 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/7967 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* logging: Flush log messages logged via gf_log_callingfn()Krutika Dhananjay2014-06-131-0/+2
| | | | | | | | | Change-Id: Id1d83a6c5985dd57ef3cf1e3d2f4d04ff2dbabfa BUG: 889157 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/8058 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/server: reflect lru limit in inode table alsoRaghavendra Bhat2014-06-134-0/+49
| | | | | | | | | | | | | | | | | | | | | Upon reconfigure, when lru limit of the inode table is changed, the new value was just saved in the private structure of the protocol/server xlator and the inode table used to have the older values still. A brick start was required for the changes to get reflected. To handle it, traverse through the xlator tree and check whether a xlator is a bound_xl or not (if it is a bound_xl it would have its itable pointer set). If a xlator is a bound_xl, then get the inode table of that bound_xl and set its lru limit to new value given via cli. Also prune the inode table so that extra inodes are purged from the inode table. Change-Id: I6909be028c116adaa1d1a5108470015b5fc6f09d BUG: 1103756 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/7957 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* Core: Fix issues reported by CppcheckLalatendu Mohanty2014-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed in this patch: [glusterfs/extras/geo-rep/gsync-sync-gfid.c:105]: (error) Resource leak: fp [glusterfs/libglusterfs/src/xlator.c:651]: (error) Uninitialized variable: gfid [glusterfs/libglusterfs/src/xlator.c:652]: (error) Uninitialized variable: gfid [glusterfs/xlators/cluster/ha/src/ha.c:2699]: (error) Possible null pointer dereference: priv [glusterfs/xlators/features/changelog/src/changelog.c:1464]: (error) Possible null pointer dereference: priv [glusterfs/xlators/mgmt/glusterd/src/glusterd-mgmt-handler.c:865]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-mgmt-handler.c:194]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-syncop.c:1408]: (error) Possible null pointer dereference: this [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:7002]: (error) Possible null pointer dereference: path_tokens Fixed in 3.4 and 3.5 branch (http://review.gluster.org/#/c/7583/ , http://review.gluster.org/#/c/7605/ will be backported in a separate patch) [glusterfs/xlators/mount/fuse/src/fuse-bridge.c:4688]: (error) Uninitialized variable: finh [glusterfs/xlators/mount/fuse/src/fuse-bridge.c:3081]: (error) Possible null pointer dereference: state [glusterfs/xlators/cluster/dht/src/dht-rebalance.c:1719]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/cluster/stripe/src/stripe.c:4940]: (error) Possible null pointer dereference: local [glusterfs/xlators/mgmt/glusterd/src/glusterd-replace-brick.c:915]: (error) Resource leak: file [glusterfs/xlators/mgmt/glusterd/src/glusterd-replace-brick.c:999]: (error) Resource leak: file [glusterfs/xlators/mgmt/glusterd/src/glusterd-sm.c:248]: (error) Possible null pointer dereference: new_ev_ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:5297]: (error) Possible null pointer dereference: this [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:6273]: (error) Possible null pointer dereference: this [glusterfs/xlators/performance/quick-read/src/quick-read.c:586]: (error) Possible null pointer dereference: iobuf [glusterfs/xlators/nfs/server/src/nfs-common.c:89]: (error) Dangerous usage of 'volname' (strncpy doesn't always null-terminate it). False positives [glusterfs/geo-replication/src/gsyncd.c:99]: (error) Memory leak: str [glusterfs/geo-replication/src/gsyncd.c:395]: (error) Memory leak: argv [glusterfs/xlators/nfs/server/src/nlm4.c:1199]: (error) Possible null pointer dereference: fde [glusterfs/xlators/mgmt/glusterd/src/glusterd-geo-rep.c:1659]: (error) Possible null pointer dereference: command [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:7001]: (error) Possible null pointer dereference: path_tokens Insignificant/Don't care [glusterfs/contrib/uuid/gen_uuid.c:369]: (warning) %ld in format string (no. 2) requires 'long *' but the argument type is 'unsigned long *'. [glusterfs/contrib/uuid/gen_uuid.c:369]: (warning) %ld in format string (no. 3) requires 'long *' but the argument type is 'unsigned long *'. [glusterfs/extras/test/test-ffop.c:27]: (error) Buffer overrun possible for long command line arguments. [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:138]: (error) Possible null pointer dereference: __ptr [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:140]: (error) Possible null pointer dereference: __ptr [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:331]: (error) Possible null pointer dereference: __ptr Change-Id: I7696ed1a2a9553b79f9714e10210a8d563a5abd8 BUG: 1091677 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/7693 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gsyncd / geo-rep: FSH recommended log locationsVenky Shankar2014-06-101-2/+3
| | | | | | | | | | | | | | | | Upgrading "working_dir" on the fly is a bit unclean yet (though it works) as currently config upgrade does not support "old" values to be expanded by using configuration variables. Change-Id: I44ed65c281f2e0ce3b6b467addc5c1c88ac674e7 BUG: 1077516 Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Kotresh H R <khiremat@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/7375 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* feature/changelog: Add timeout to changelog barrier.Kotresh H R2014-06-101-0/+3
| | | | | | | | | | | | | | | | | | | This patch introduces configurable 'changelog-barrier-timeout' in changelog. The default changelog-barrier-timeout is set to 120 sec which is same as barrier-timeout of barrier translator. On this timeout, all the barriered fops are unbarriered. It is safe to have this internal timeout for changelog barrier to prevent it from indefinite barrierring of fops if barrier disable notification does not come from snapshot for some reason. Change-Id: Iad07807935f88222cdefcd46312b4b6579186dce BUG: 1094226 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/7669 Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd: Better op-version values and rangesKaushal M2014-06-091-9/+18
| | | | | | | | | | | | | | | | | | | | | | | | | Till now, the op-version was an incrementing integer that was incremented by 1 for every Y release (when using the X.Y.Z release numbering). This is not flexible enough to handle backports of features into Z releases. Going forward, from the upcoming 3.6.0 release, the op-versions will be multi-digit integer values composed of the version numbers, instead of a simple incrementing integer. An X.Y.Z release will have XYZ as its op-version. Y and Z will always be 2 digits wide and will be padded with 0 if required. This way of bumping op-versions allows for gaps in between the subsequent Y releases. These gaps will allow backporting features from new Y releases into old Z releases. Change-Id: I463f82902d997ec07e76dae58ac935f33e6393c2 BUG: 1104997 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/7963 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* logging: Prior to log initialization, print all logs to syslog.Poornima G2014-06-051-6/+24
| | | | | | | | | | | | | | | | | There can be calls to gf_msg even before caling logging_init(). Currently such messages appear on stderr. In this patch, gf_msg is changed to log messages to syslog if the logging framework is not inited. Change-Id: I8fcf562f9d07b5b6b789fbd9e6f37b354de16b98 BUG: 1103623 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/7948 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Fix min-free-disk calculations when quota-deem-statfs is onKrutika Dhananjay2014-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: As part of file creation, DHT sends a statfs call to all of its sub-volumes and expects in return the local space consumption and availability on each one of them. This information is used by DHT to ensure that atleast min-free-disk amount of space is left on each sub-volume in the event that there ARE other sub-volumes with more space available. But when quota-deem-statfs is enabled, quota xlator on every brick unwinds the statfs call with volume-wide consumption of disk space. This leads to miscalculation in min-free-disk algo, thereby misleading DHT at some point, into thinking all sub-volumes have equal available space, in which case DHT keeps sending new file creates to subvol-0, causing it to become 100% full at some point although there ARE other subvols with ample space available. FIX: The fix is to make quota_statfs() behave as if quota xlator weren't enabled, thereby making every brick return only its local consumption and disk space availability. Change-Id: I211371a1eddb220037bd36a128973938ea8124c2 BUG: 1099890 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7845 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* user servicable snapshotsRaghavendra Bhat2014-05-292-1/+17
| | | | | | | | | | Change-Id: Idbf27dbe088e646a8ab81cedc5818413795895ea Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Anand Subramanian <anands@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/7700 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Fix unused variable warningPranith Kumar K2014-05-241-3/+3
| | | | | | | | | Change-Id: If385ba0993fdbd3e3b7500b2b6631721911e0ab3 BUG: 1100144 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/7858 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Provide a way to disable mempool effectsPranith Kumar K2014-05-221-1/+3
| | | | | | | | | | | | | | | | | | | | | | Problems: - Mempool comes in the way of debugging mem-leaks/corruptions because tools like valgrind can't detect mem-pools. - Accessing freed pointers may crash only when the mem-pool is completely exhausted. Solution: In DEBUG builds set mempool count to 0 irrespective of the pool size requested. This should help in debugging memory-leaks/corruptions. Change-Id: I7c6a2d696e330f12acff57ebdc589cc150e9ab79 BUG: 1100144 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/7835 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* logging: remove unused message-id scriptsNiels de Vos2014-05-222-56/+10
| | | | | | | | | | | | | | | | | | | | | | | | | The current unused implementation for message-ids in the logs depends on automatically generated files. The generated files are not included in the distributed tarball. This causes issues when distributions build packages, they need to re-run ./autogen.sh to create the needed files. I thought of including the generated files in the distribution tarball. However, the contents of these files are not actively used, so it seems to make more sense to drop it all together. These functions were the only users of libintl and gettext too, so dropped the requirement checking from configure.ac. A replacement for the message-id logging framework is in progress. Any changes that this patch makes, can be reverted in the submission of patches for the new framework. Reference: http://thread.gmane.org/gmane.comp.file-systems.gluster.devel/6212 Change-Id: Iea82dd3910944a5c6be3ee393806eccabd575e11 BUG: 1038391 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7714 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: move messages to new logging frameworkRavishankar N2014-05-171-0/+4
| | | | | | | | | | | | | | Change important (from a diagnostics point of view) log messages to use the gf_msg() framework. Change-Id: I0a58184bbb78989db149e67f07c140a21c781bc2 BUG: 1075611 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/7784 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* logging: Add extra logs to enable testing of log suppressionKrutika Dhananjay2014-05-161-0/+16
| | | | | | | | | | | | | | Note: This patch may be reverted once the testing effort is complete, if desired. Change-Id: I840399c531a43049749073d4d59bc0c85f525be3 BUG: 1075611 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7681 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Use strncpy() instead of strcpy()Santosh Kumar Pradhan2014-05-141-1/+3
| | | | | | | | | | | | | | Use secure strncpy() to copy the input data to static buffer and make sure to NULL terminate the copied buffer (if source buffer is longer than static buffer). Change-Id: If3564f1398c8eb92669d4bc92700bbdf6ee2278e BUG: 1097417 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/7759 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* glusterd: Fetch brick mount_dirs during brick create.Avra Sengupta2014-05-061-1/+1
| | | | | | | | | | | | | | | | | Fetch the mount directory path for a brick, during volume create, add-brick, and replace-brick. When a snap-create is missed, use this mount directory information to create the brick path for the missed snap brick. Change-Id: Iad3eec96a32cf340f26bdf3f28e2f529e4b77e31 BUG: 1061685 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7550 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* meta: print in json for stack/frames, cmdline and versionHarshavardhana2014-05-052-61/+56
| | | | | | | | | | | | | - Follow formatting rules based on RFC4627 - http://www.ietf.org/rfc/rfc4627.txt - Add checks for json in regression test meta.t Change-Id: I480d32ce042b202d3ed8939623c629a03b458551 BUG: 1089216 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7653 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* meta: export process state dumpAnand Avati2014-05-052-0/+17
| | | | | | | | | | | | Various parts of process state dump are exposed through most appropriate virual files/dirs Change-Id: Iff30f8ea76552f2f6d9c98def688c5ec4bc6f2af BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7542 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* meta: (re-)Implement Meta translatorAnand Avati2014-05-052-0/+26
| | | | | | | | | | | | | | | | | The meta translator exposes details about glusterfs itself in the form of a virtual namespace. Loading the translator on the client side creates the meta virtual view under $mntpoint/.meta by default. The directory is not listed (even with ls -a) and can be accessed by doing a "cd /mnt/.meta" Change-Id: I5ffdf39203841a9562a8280a1f79dc76d4dded5d BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7509 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* mem-accounting: enable memory accounting by defaultAnand Avati2014-05-051-0/+2
| | | | | | | | | | | | | | | | memory accounting are constant time operations which involve a few pointer dereferences and integer increments (no loops or searches etc.) benefits of having memory usage info outweigh the minor accounting overheads Change-Id: If9bc6db5ffd0e00f0fd64b2f6eed094bf3543996 BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7543 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* mem-accounting: store type string and print in metaAnand Avati2014-05-053-11/+15
| | | | | | | | | Change-Id: Ied1de473c72967110b54f033768f7ac60bf66edc BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7541 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* statedump: strfd based APIsAnand Avati2014-05-052-8/+151
| | | | | | | | | | | | Expose strfd based APIs for extracing various types of xlator state information. Change-Id: Ibbb6594b6fb31206bc6a1b1ea6514ed41889583b BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7540 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* mgmt/gluster: Use fsync instead of O_SYNCPranith Kumar K2014-05-052-4/+19
| | | | | | | | | | | | | | | | | Glusterd uses O_SYNC to write to temp file then performs renames to the actual file and performs fsync on parent directory. Until this rename happens syncing writes to the file can be deferred. In this patch O_SYNC open of temp file is removed and fsync of the fd before rename is done. Change-Id: Ie7da161b0daec845c7dcfab4154cc45c2f49d825 BUG: 908277 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/7370 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/server: Validate outstanding-rpc-limitSantosh Kumar Pradhan2014-05-031-1/+2
| | | | | | | | | | | | | | | server.outstanding-rpc-limit by passes validation enforcement of gluster as protocol/server ignores any keys starting with rpc (rpc* wildcard). Which also causes a side effect, i.e. help text gets displayed as NULL. Change-Id: I925e028529d671e1e29a0c7ff7e625fdb49a1be4 BUG: 1091364 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/7562 Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd/snapshot : Copy geo-rep status and config files before taking a ↵Sachin Pandit2014-05-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | snapshot. geo-rep status and conf files needs to be copied before taking a snapshot. The idea here is, when the snapshot is restored, these config and status files needs to be placed back in geo-replication folder so that geo-replication can start with the same state it was when taking a snapshot. Details : Before a snapshot is taken, Copy the status and config files present in /var/lib/glusterd/geo-replication/. The files copied are gsyncd.conf and status files of each session belonging to a volume whose snapshot is about to be taken. Change-Id: I0234ecd846883350c59777c2505290729de0ce05 BUG: 1061685 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/7495 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* logging: use duplicate stderr, instead of re-openingAnand Avati2014-04-301-2/+24
| | | | | | | | | | | | | | | | | | The special filename "-" is supposed to log to stderr. Instead of trying to explictly open "/dev/stderr" again (which may not be possible as permissions might have changed by then), dup the stderr and use the copy. It is not a good idea to use @stderr global variable directly, as ctx->log.logfile is fclose()d in glfs_fini() (was fixed in http://review.gluster.org/6452) Change-Id: Ia6c538fe363905588dcf4fc4783804073956a586 BUG: 1088589 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7607 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* logging: Introduce suppression of repetitive log messagesKrutika Dhananjay2014-04-304-107/+777
| | | | | | | | | Change-Id: I8efa08cc9832ad509fba65a88bb0cddbaf056404 BUG: 1075611 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7475 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* strfd: introduce strvprintf() APIAnand Avati2014-04-292-4/+17
| | | | | | | | | | | | variant of strprintf() which accepts va_list as parameter instead of variable args (...) Change-Id: I205acf3aaf5440890d5f9cad693c6a358a5d9218 BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7539 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* logging: Fix msg-id segment allocationKrutika Dhananjay2014-04-291-14/+28
| | | | | | | | | | Change-Id: I85efa4b91c263d7374d34dd0d84e9f1032d07ab6 BUG: 1075611 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7580 Reviewed-by: N Balachandran <nbalacha@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* dict: de-allocate data on dict-set failuresPranith Kumar K2014-04-281-0/+32
| | | | | | | | | | | Found the bug while browsing code. Very difficult to hit this though. Change-Id: I84bd5d23d19b6aa16866fc0f1b56aa22cb8a5f1f BUG: 1079215 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/7310 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs: Define macro GF_PRI_USEC for Linux as wellPranith Kumar K2014-04-261-0/+1
| | | | | | | | | | Change-Id: I073f1f4ead4391d497fbb7603f9ee0257271493b BUG: 1089172 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/7571 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Anand Avati <avati@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-2417-93/+332
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-19 07:11:32 +0000