summaryrefslogtreecommitdiffstats
path: root/rpc/rpc-lib
Commit message (Collapse)AuthorAgeFilesLines
* glusterd : Disallow peer detach if snapshot bricks exist on itGaurav Yadav2017-03-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem : - Deploy gluster on 2 nodes, one brick each, one volume replicated - Create a snapshot - Lose one server - Add a replacement peer and new brick with a new IP address - replace-brick the missing brick onto the new server (wait for replication to finish) - peer detach the old server - after doing above steps, glusterd fails to restart. Solution: With the fix detach peer will populate an error : "N2 is part of existing snapshots. Remove those snapshots before proceeding". While doing so we force user to stay with that peer or to delete all snapshots. Change-Id: I3699afb9b2a5f915768b77f885e783bd9b51818c BUG: 1322145 Signed-off-by: Gaurav Yadav <gyadav@redhat.com> Reviewed-on: https://review.gluster.org/16907 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* rpc: bump up conn->cleanup_gen in rpc_clnt_reconnect_cleanupAtin Mukherjee2017-03-201-1/+3
| | | | | | | | | | | | | | | | | | | | | | | Commit 086436a introduced generation number (cleanup_gen) to ensure that rpc layer doesn't end up cleaning up the connection object if application layer has already destroyed it. Bumping up cleanup_gen was done only in rpc_clnt_connection_cleanup (). However the same is needed in rpc_clnt_reconnect_cleanup () too as with out it if the object gets destroyed through the reconnect event in the application layer, rpc layer will still end up in trying to delete the object resulting into double free and crash. Peer probing an invalid host/IP was the basic test to catch this issue. Change-Id: Id5332f3239cb324cead34eb51cf73d426733bd46 BUG: 1433578 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16914 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* rpc: avoid logging success on failureMilind Changire2017-03-071-0/+5
| | | | | | | | | | | | | | | | Avoid logging Success in the event of failure especially when errno has no meaningful value w.r.t. the failure. In this case the errno is set to zero when there's indeed a failure at the RPC level. Change-Id: If2cc81aa1e590023ed22892dacbef7cac213e591 BUG: 1426032 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: https://review.gluster.org/16730 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* rpc/clnt: remove locks while notifying CONNECT/DISCONNECTRaghavendra G2017-03-012-31/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Locking during notify was introduced as part of commit aa22f24f5db7659387704998ae01520708869873 [1]. The fix was introduced to fix out-of-order CONNECT/DISCONNECT events from rpc-clnt to parent xlators [2]. However as part of handling DISCONNECT protocol/client does unwind saved frames (with failure) waiting for responses. This saved_frames_unwind can be a costly operation and hence ideally shouldn't be included in the critical section of notifylock, as it unnecessarily delays the reconnection to same brick. Also, its not a good practise to pass control to other xlators holding a lock as it can lead to deadlocks. So, this patch removes locking in rpc-clnt while notifying parent xlators. To fix [2], two changes are present in this patch: * notify DISCONNECT before cleaning up rpc connection (same as commit a6b63e11b7758cf1bfcb6798, patch [3]). * protocol/client uses rpc_clnt_cleanup_and_start, which cleans up rpc connection and does a start while handling a DISCONNECT event from rpc. Note that patch [3] was reverted as rpc_clnt_start called in quick_reconnect path of protocol/client didn't invoke connect on transport as the connection was not cleaned up _yet_ (as cleanup was moved post notification in rpc-clnt). This resulted in clients never attempting connect to bricks. Note that one of the neater ways to fix [2] (without using locks) is to introduce generation numbers to map CONNECT and DISCONNECTS across epochs and ignore DISCONNECT events if they don't belong to current epoch. However, this approach is a bit complex to implement and requires time. So, current patch is a hacky stop-gap fix till we come up with a more cleaner solution. [1] http://review.gluster.org/15916 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1386626 [3] http://review.gluster.org/15681 Change-Id: I62daeee8bb1430004e28558f6eb133efd4ccf418 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1427012 Reviewed-on: https://review.gluster.org/16784 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Use int instead of int8_t for the 3 variablesMichael Scherer2017-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | Since strcmp return a int, and since the spec of strcmp do not tell the return value, it could return 256 and this would overflow. Found by Coverity scan. (thanks to Stéphane Marcheusin who explained the details to me) Change-Id: I5195e05b44f8b537226e6cee178d95a1ab904e96 BUG: 789278 Signed-off-by: Michael Scherer <misc@redhat.com> Reviewed-on: https://review.gluster.org/16738 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Michael Scherer <misc@fedoraproject.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rpc: fix obvious typo in cleanup code in rpc_clnt_notifyMateusz Slupny2017-02-191-1/+1
| | | | | | | | | | | | | | | Change-Id: I003e38b238704d3345d46688355bcf3702455ba1 BUG: 1399593 Signed-off-by: Mateusz Slupny <mateusz.slupny@appeartv.com> [ndevos: rebased after I8ff5d1a32 moved the code around] Reviewed-on: https://review.gluster.org/15969 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpcsvc: Add rpchdr and proghdr to iobref before submitting to transportPoornima G2017-02-152-3/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: When fio is run on multiple clients (each client writes to its own files), and meanwhile the clients does a readdirp, thus the client which did a readdirp will now recieve the upcalls. In this scenario the client disconnects with rpc decode failed error. RCA: Upcall calls rpcsvc_request_submit to submit the request to socket: rpcsvc_request_submit currently: rpcsvc_request_submit () { iobuf = iobuf_new iov = iobuf->ptr fill iobuf to contain xdrised upcall content - proghdr rpcsvc_callback_submit (..iov..) ... if (iobuf) iobuf_unref (iobuf) } rpcsvc_callback_submit (... iov...) { ... iobuf = iobuf_new iov1 = iobuf->ptr fill iobuf to contain xdrised rpc header - rpchdr msg.rpchdr = iov1 msg.proghdr = iov ... rpc_transport_submit_request (msg) ... if (iobuf) iobuf_unref (iobuf) } rpcsvc_callback_submit assumes that once rpc_transport_submit_request() returns the msg is written on to socket and thus the buffers(rpchdr, proghdr) can be freed, which is not the case. In especially high workload, rpc_transport_submit_request() may not be able to write to socket immediately and hence adds it to its own queue and returns as successful. Thus, we have use after free, for rpchdr and proghdr. Hence the clients gets garbage rpchdr and proghdr and thus fails to decode the rpc, resulting in disconnect. To prevent this, we need to add the rpchdr and proghdr to a iobref and send it in msg: iobref_add (iobref, iobufs) msg.iobref = iobref; The socket layer takes a ref on msg.iobref, if it cannot write to socket and is adding to the queue. Thus we do not have use after free. Thank You for discussing, debugging and fixing along: Prashanth Pai <ppai@redhat.com> Raghavendra G <rgowdapp@redhat.com> Rajesh Joseph <rjoseph@redhat.com> Kotresh HR <khiremat@redhat.com> Mohammed Rafi KC <rkavunga@redhat.com> Soumya Koduri <skoduri@redhat.com> Change-Id: Ifa6bf6f4879141f42b46830a37c1574b21b37275 BUG: 1421937 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16613 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* core: run many bricks within one glusterfsd processJeff Darcy2017-01-302-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/14763 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: add a cli command to trigger a statedump on a clientPoornima G2017-01-232-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this, we will be able to trigger statedumps on remote Gluster clients, mainly targetted for applications using libgfapi. Design: SIGUSR signal is the most comman way of taking a statedump in Gluster. But it cannot be used for libgfapi based processes, as the process loading the library might have already consumed SIGUSR signal. Hence going by the command way. One has to issue a Gluster command to initiate a statedump on the libgfapi based client. The command takes hostname and PID as an argument. All the glusterds in the cluster, check if they are connected to the specified hostname, and send an RPC request to all the connected clients from that hostname (via the mgmt connection). URL: http://review.gluster.org/16357 Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91 BUG: 1169302 Signed-off-by: Poornima G <pgurusid@redhat.com> [ndevos: minor fixes and split patch in smaller pieces] Reviewed-on: https://review.gluster.org/9228 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* tier : Tier as a servicehari gowtham2017-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* socket: socket disconnect should wait for poller thread exitRajesh Joseph2016-12-215-8/+9
| | | | | | | | | | | | | | | | | | | | | When SSL is enabled or if "transport.socket.own-thread" option is set then socket_poller is run as different thread. Currently during disconnect or PARENT_DOWN scenario we don't wait for this thread to terminate. PARENT_DOWN will disconnect the socket layer and cleanup resources used by socket_poller. Therefore before disconnect we should wait for poller thread to exit. Change-Id: I71f984b47d260ffd979102f180a99a0bed29f0d6 BUG: 1404181 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/16141 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rpc: fix for race between rpc and protocol/clientRajesh Joseph2016-12-052-40/+59
| | | | | | | | | | | | | | | | | | | | | | | | It is possible that the notification thread which notifies protocol/client layer about the disconnection is put to sleep and meanwhile, a fuse thread or a timer thread initiates and completes reconnection to the brick. The notification thread is then woken up and protocol/client layer updates its flags to indicate that network is disconnected. No reconnection is initiated because reconnection is rpc-lib layer's responsibility and its flags indicate that connection is connected. Fix: Serialize connect and disconnect notify Credit: Raghavendra Talur <rtalur@redhat.com> Change-Id: I8ff5d1a3283b47f5c26848a42016a40bc34ffc1d BUG: 1386626 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/15916 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: CLI for granular entry heal enablement/disablementKrutika Dhananjay2016-11-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When there are already existing non-granular indices created that are yet to be healed, if granular-entry-heal option is toggled from 'off' to 'on', AFR self-heal whenever it kicks in, will try to look for granular indices in 'entry-changes'. Because of the absence of name indices, granular entry healing logic will fail to heal these directories, and worse yet unset pending extended attributes with the assumption that are no entries that need heal. To get around this, a new CLI is introduced which will invoke glfsheal program to figure whether at the time an attempt is made to enable granular entry heal, there are pending heals on the volume OR there are one or more bricks that are down. If either of them is true, the command will be failed with the appropriate error. New CLI: gluster volume heal <VOL> granular-entry-heal {enable,disable} Change-Id: I1f4fe8162813b9068e198965d94169fee4adc099 BUG: 1370410 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15747 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Revert "rpc: Fix the race between notification and reconnection"Pranith Kumar Karampuri2016-11-161-4/+3
| | | | | | | | | | | | | | | | This reverts commit a6b63e11b7758cf1bfcb67985e25ec02845f0995. Nithya and Rajesh found that the mount fails sometimes after this patch was merged so reverting it. BUG: 1386626 Change-Id: I959a5b6c7da61368cf4c67c98193c6e8fdd1755d Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15838 Reviewed-by: N Balachandran <nbalacha@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* rpc: Fix the race between notification and reconnectionPranith Kumar K2016-10-241-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: There was a hang because unlock on an entry failed with ENOTCONN. Client thinks the connection is down where as server thinks the connection is up. This is the race we are seeing: 1) Connection from client to the brick disconnects. 2) Saved frames unwind is called which unwinds all frames that were wound before disconnect. 3) connection from client to the brick happens and setvolume. 4) Disconnect notification for the connection in 1) comes now and calls client_rpc_notify() which marks the connection to be offline even when the connection is up. This is happening because I/O can retrigger connection before disconnect notification is sent to the higher layers in rpc. Fix: Notify the higher layers that a disconnect happened and then go ahead with reconnect logic. For the logs which point to the information above check: https://bugzilla.redhat.com/show_bug.cgi?id=1386626#c1 Thanks to Raghavendra G for suggesting the correct fix. BUG: 1386626 Change-Id: I3c84ba1f17010bd69049fa88ec5f0ae431f8cda9 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15681 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* compound fops: Fix file corruption issueKrutika Dhananjay2016-10-244-15/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Address of a local variable @args is copied into state->req in server3_3_compound (). But even after the function has gone out of scope, in server_compound_resume () this pointer is accessed and dereferenced. This patch fixes that. 2. Compound fops, by virtue of NOT having a vector sizer (like the one writev has), ends up having both the header and the data (in case one of its member fops is WRITEV) in the same hdr_iobuf. This buffer was not being preserved through the lifetime of the compound fop, causing it to be overwritten by a parallel write fop, even when the writev associated with the currently executing compound fop is yet to hit the desk, thereby corrupting the file's data. This is fixed by associating the hdr_iobuf with the iobref so its memory remains valid through the lifetime of the fop. 3. Also fixed a use-after-free bug in protocol/client in compound fops cbk, missed by Linux but caught by NetBSD. Finally, big thanks to Pranith Kumar K and Raghavendra Gowdappa for their help in debugging this file corruption issue. Change-Id: I6d5c04f400ecb687c9403a17a12683a96c2bf122 BUG: 1378778 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15654 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* rpc: increase RPC/XID with each callbackNiels de Vos2016-09-192-3/+19
| | | | | | | | | | | | | | | | | | | | | The RPC/XID for callbacks has been hardcoded to GF_UNIVERSAL_ANSWER. In Wireshark these RPC-calls are marked as "RPC retransmissions" because of the repeating RPC/XID. This is most confusing when verifying the callbacks that the upcall framework sends. There is no way to see the difference between real retransmissions and new callbacks. This change was verified by create and removal of files through different Gluster clients. The RPC/XID is increased on a per connection (or client) base. The expectations of the RPC protocol are met this way. Change-Id: I2116bec0e294df4046d168d8bcbba011284cd0b2 BUG: 1377097 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15524 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd : Introduce reset brickAnuradha Talur2016-08-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The command basically allows replace brick with src and dst bricks as same. Usage: gluster v reset-brick <volname> <hostname:brick-path> start This command kills the brick to be reset. Once this command is run, admin can do other manual operations that they need to do, like configuring some options for the brick. Once this is done, resetting the brick can be continued with the following options. gluster v reset-brick <vname> <hostname:brick> <hostname:brick> commit {force} Does the job of resetting the brick. 'force' option should be used when the brick already contains volinfo id. Problem: On doing a disk-replacement of a brick in a replicate volume the following 2 scenarios may occur : a) there is a chance that reads are served from this replaced-disk brick, which leads to empty reads. b) potential data loss if next writes succeed only on replaced brick, and heal is done to other bricks from this one. Solution: After disk-replacement, make sure that reset-brick command is run for that brick so that pending markers are set for the brick and it is not chosen as source for reads and heal. But, as of now replace-brick for the same brick-path is not allowed. In order to fix the above mentioned problem, same brick-path replace-brick is needed. With this patch reset-brick commit {force} will be allowed even when source and destination <hostname:brickpath> are identical as long as 1) destination brick is not alive 2) source and destination brick have the same brick uuid and path. Also, the destination brick after replace-brick will use the same port as the source brick. Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de BUG: 1266876 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12250 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* rpc: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-3/+2
| | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I20d91091bee0bf8f198a307ebba4b284bc3817ff BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15240 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* glusterd/cli: cli to get local state representation from glusterdSamikshan Bairagya2016-08-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is no existing CLI that can be used to get the local state representation of the cluster as maintained in glusterd in a readable as well as parseable format. The CLI added has the following usage: # gluster get-state [daemon] [odir <path/to/output/dir>] [file <filename>] This would dump data points that reflect the local state representation of the cluster as maintained in glusterd (no other daemons are supported as of now) to a file inside the specified output directory. The default output directory and filename is /var/run/gluster and glusterd_state_<timestamp> respectively. The option for specifying the daemon name leaves room to add support for other daemons in the future. Following are the data points captured as of now to represent the state from the local glusterd pov: * Peer: - Primary hostname - uuid - state - connection status - List of hostnames * Volumes: - name, id, transport type, status - counts: bricks, snap, subvol, stripe, arbiter, disperse, redundancy - snapd status - quorum status - tiering related information - rebalance status - replace bricks status - snapshots * Bricks: - Path, hostname (for all bricks these info will be shown) - port, rdma port, status, mount options, filesystem type and signed in status for bricks running locally. * Services: - name, online status for initialised services * Others: - Base port, last allocated port - op-version - MYUUID Change-Id: I4a45cc5407ab92d8afdbbd2098ece851f7e3d618 BUG: 1353156 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/14873 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* rpc: fixing illegal memory accessMuthu-vigneshwaran2016-08-111-1/+1
| | | | | | | | | | | | | | CID:1357876 Change-Id: I34eee0bf0367f963ddf6e9d6b28b7d3a9af12c90 BUG: 789278 Signed-off-by: Muthu-vigneshwaran <mvignesh@redhat.com> Reviewed-on: http://review.gluster.org/15094 Tested-by: Muthu Vigneshwaran NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* changelog/rpc: Fix rpc_clnt_t mem leaksKotresh HR2016-07-222-6/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: 1. Freeing up rpc_clnt object might lead to crashes. Well, it was not a necessity to free rpc-clnt object till now because all the existing use cases needs to reconnect back on disconnects. Hence timer code was not taking ref on rpc-clnt object. Glusterd had some use-cases that led to crash due to ping-timer and they fixed only those code paths that involve ping-timer. Now, since changelog has an use-case where rpc-clnt need to be freed up, we need to fix timer code to take refs 2. In changelog, because of issue 1, only mydata was being freed which is incorrect. And there are races where rpc-clnt object would access the freed mydata which would lead to crashes. Since changelog xlator resides on brick side and is long living process, if multiple libgfchangelog consumers register to changelog and disconnect/reconnect mulitple times, it would result in leak of 'rpc-clnt' object for every connect/disconnect. SOLUTION: 1. Handle ref/unref of 'rpc_clnt' structure in timer functions properly. 2. In changelog, unref 'rpc_clnt' in RPC_CLNT_DISCONNECT after disabling timers and free mydata on RPC_CLNT_DESTROY. RPC SETUP IN CHANGELOG: 1. changelog xlator initiates rpc server say 'changelog_rpc_server' 2. libgfchangelog initiates one rpc server say 'libgfchangelog_rpc_server' 3. libgfchangelog initiates rpc client and connects to 'changelog_rpc_server' 4. In return changelog_rpc_server initiates a rpc client and connects back to 'libgfchangelog_rpc_server' REF/UNREF HANDLING IN TIMER FUNCTIONS: Let's say rpc clnt refcount = 1 1. Take the ref before reigstering callback to timer queue >>>> rpc_clnt_ref (say ref count becomes = 2) 2. Register a callback to timer say 'callback1' 3. If register fails: >>>> rpc_clnt_unref (ref count = 1) 4. On timer expiration, 'callback1' gets called. So unref rpc clnt at the end in 'callback1'. This is corresponding to ref taken in step 1 >>>> rpc_clnt_unref (ref count = 1) 5. The cycle from step-1 to step-4 continues....until timer cancel event happens 6. timer cancel of say 'callback1' If timer cancel fails: Do nothing, Step-4 would have unrefd If timer cancel succeeds: >>>> rpc_clnt_unref (ref count = 1) Change-Id: I91389bc511b8b1a17824941970ee8d2c29a74a09 BUG: 1316178 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13658 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rpc: fix several problems in failure handle logicZhou Zhengping2016-07-141-9/+8
| | | | | | | | | | | | | | | | Once dynstr is set into a dict by function dict_set_dynstr, its free operation will be called by this dict when the dict is destroyed. Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Change-Id: Idd2bd19a041bcb477e1c897428ca1740fb75c5f3 BUG: 1354141 Reviewed-on: http://review.gluster.org/14882 Tested-by: Zhou Zhengping <johnzzpcrystal@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* mgmt: remove unused and misleading pmap_signupJeff Darcy2016-07-071-0/+5
| | | | | | | | | | | | | | | We use signin, but not signup. Having both just introduces confusion. The proc number has been retained to avoid changes to the numbering of other procs, and the mapping to a name has similarly been retained as a placeholder, but the code and structure definitions have been removed. Change-Id: I60f64f3b5d71ba6ed6862b36a38f90a9c8271c9f Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/14792 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* remove unused variablesPrasanna Kumar Kalever2016-05-061-2/+0
| | | | | | | | | | | | | | Cleaning dead initializations. Change-Id: I53ae506593cd10441d61df3b2c9249544a7871f7 BUG: 1254067 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/11932 Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* glusterd: add defence mechanism to avoid brick port clashesPrasanna Kumar Kalever2016-05-041-40/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intro: Currently glusterd maintain the portmap registry which contains ports that are free to use between 49152 - 65535, this registry is initialized once, and updated accordingly as an then when glusterd sees they are been used. Glusterd first checks for a port within the portmap registry and gets a FREE port marked in it, then checks if that port is currently free using a connect() function then passes it to brick process which have to bind on it. Problem: We see that there is a time gap between glusterd checking the port with connect() and brick process actually binding on it. In this time gap it could be so possible that any process would have occupied this port because of which brick will fail to bind and exit. Case 1: To avoid the gluster client process occupying the port supplied by glusterd : we have separated the client port map range with brick port map range more @ http://review.gluster.org/#/c/13998/ Case 2: (Handled by this patch) To avoid the other foreign process occupying the port supplied by glusterd : To handle above situation this patch implements a mechanism to return EADDRINUSE error code to glusterd, upon which a new port is allocated and try to restart the brick process with the newly allocated port. Note: Incase of glusterd restarts i.e. runner_run_nowait() there is no way to handle Case 2, becuase runner_run_nowait() will not wait to get the return/exit code of the executed command (brick process). Hence as of now in such case, we cannot know with what error the brick has failed to connect. This patch also fix the runner_end() to perform some cleanup w.r.t return values. Change-Id: Iec52e7f5d87ce938d173f8ef16aa77fd573f2c5e BUG: 1322805 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/14043 Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol: add setactivelk () fopSusant Palai2016-05-011-0/+1
| | | | | | | | | | | Change-Id: I60fe2d59c454095febce4c0fbef87a2dad9636e4 BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/14013 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* protocol: add getactivelk () fopSusant Palai2016-05-011-1/+2
| | | | | | | | | | | Change-Id: Ie38198db990f133fe163ba160cdf647e34f83f4f BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/13994 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* Protocol: Add lease fopPoornima G2016-04-291-0/+2
| | | | | | | | | | | | Change-Id: I64c361d3e4ae86d57dc18bb887758d044c861237 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11597 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: try to connect on GF_PMAP_PORT_FOREIGN aswellPrasanna Kumar Kalever2016-04-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | This patch fix couple of things mentioned below: 1. previously we use to try to connect on only GF_PMAP_PORT_FREE in the pmap_registry_alloc(), it could happen that some foreign process would have freed the port by this time ?, hence it is worth giving a try on GF_PMAP_PORT_FOREIGN ports as well instead of wasting them all. 2. fix pmap_registry_remove() to mark the port asGF_PMAP_PORT_FREE 3. added useful comments on gf_pmap_port_type enum members Change-Id: Id2aa7ad55e76ae3fdece21bed15792525ae33fe1 BUG: 1322805 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/14080 Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* performance/decompounder: Introducing decompounder xlatorAnuradha Talur2016-04-251-0/+1
| | | | | | | | | | | | | | This xlator decompounds the compound fops received, and executes them serially. Change-Id: Ieddcec3c2983dd9ca7919ba9d7ecaa5192a5f489 BUG: 1303829 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/13577 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* rpc: check the right variable after gf_strdupZhou Zhengping2016-04-141-1/+1
| | | | | | | | | | | | | Change-Id: If4628bd37f2c85a070f6c3b3e0583d939100d7ec BUG: 1325683 Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-on: http://review.gluster.org/13934 Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Anoop C S <anoopcs@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* afr: add mtime based split-brain resolution to CLIRavishankar N2016-03-291-0/+1
| | | | | | | | | | | | | | | | | | | Extended the CLI to include support for split-brain resolution based on mtime. The command syntax is: $:gluster volume heal <VOLNAME> split-brain latest-mtime <FILE> where <FILE> can be either the full file name as seen from the root of the volume (or) the gfid-string representation of the file. Change-Id: I7a16f72ff1a4495aa69f43f22758a9404e958b4f BUG: 1321322 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13828 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* glusterd/rpc : Discard duplicate Disconnect eventsAtin Mukherjee2016-03-222-0/+24
| | | | | | | | | | | | | | | If a peer rpc disconnect event has been already processed, skip the furthers as processing them are overheads and sometimes may lead to a crash like due to a double free Change-Id: Iec589ce85daf28fd5b267cb6fc82a4238e0e8adc BUG: 1318546 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13790 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol client/server: Fix client-server handshakeAvra Sengupta2016-03-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently on a successful connection between protocol server and client, the protocol client initiates a CHILD_UP event in the client stack. At this point in time, only the connection between server and client is established, and there is no guarantee that the server side stack is ready to serve requests. It works fine now, as most server side translators are not dependent on any other factors, before being able to serve requests today and hence they are up by the time the client stack translators receive the CHILD_UP (initiated by client handshake). The gap here is exposed when certain server side translators like NSR-Server for example, have a couple of protocol clients as their child(connecting them to other bricks), and they can't really serve requests till a quorum of their children are up. Hence these translators should defer sending CHILD_UP till they have enough children up, and the same needs to be propagated to the client stack translators. Fix: Maintain a child_up variable in both the protocol client and protocol server translators. The protocol server should update this value based on the CHILD_UP and CHILD_DOWN events it receives from the translators below it. On receiving such an event it should forward that event to the client. The protocol client on receiving such an event should forward it up the client stack, thereby letting the client translators correctly know that the server is up and ready to serve. The clients connecting later(long after a server has initialized and processed it's CHILD_UP events), will receive a child_up status as part of the handshake, and based on the status of the server's child_up, can either propagate a CHILD_UP event or defer it. Change-Id: I0807141e62118d8de9d9cde57a53a607be44a0e0 BUG: 1312845 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/13549 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* rpc: Connect back only if rpc is not disabledKotresh HR2016-03-081-1/+1
| | | | | | | | | | | | | | | | | | | | This is to fix regression caused by below patch - http://review.gluster.org/#/c/13456/ As discussed over http://thread.gmane.org/gmane.comp.file-systems.gluster.devel/14284, patch #13456 caused a regression where in if there are any pending rpc invocations, we end up accessing freed object. This patch fixes it by allowing reconnect during rpc submit only if rpc is not disabled. Change-Id: I4ef4dd52bd42368bb89129f98bc973e46c6a39f4 BUG: 1295107 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13592 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* rpc: Fix for rpc_transport_t leakSoumya Koduri2016-02-231-2/+3
| | | | | | | | | | | | | | | | | | | | The transport object needs to get unref'ed when the rpc clnt object is getting destroyed. But currently in rpc_clnt_disable() we set conn->trans to NULL before it gets unref'ed leading to transport object leak. This change is to fix it by setting conn-tran to NULL only when it is being unref'ed. Change-Id: I79ba34e28ae19eb616035f36bbed1c2f47875b94 BUG: 1295107 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/13456 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* rpc : build_prog_details should iterate program list inside critical sectionAtin Mukherjee2016-02-221-13/+20
| | | | | | | | | | | | | | | | | | While I was analyzing a glusterd crash from free_prog_details, a code walkthrough detects that we iterate over the rpc svc program list without been inside the criticial section. This opens up a possibility of a crash when there is a concurrent writer updating the same list. Solution is to read the list inside lock. Change-Id: Ib4b4b0022a9535e139cd3c00574aab23f07aa9d2 BUG: 1306560 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13428 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Bug fixes for IPv6 supportNithin D2016-02-201-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Glusterd not working using ipv6 transport. The idea is with proper glusterd.vol configuration, 1. glusterd needs to listen on default port (240007) as IPv6 TCP listner. 2. Volume creation/deletion/mounting/add-bricks/delete-bricks/peer-probe needs to work using ipv6 addresses. 3. Bricks needs to listen on ipv6 addresses. All the above functionality is needed to say that glusterd supports ipv6 transport and this is broken. Fix: When "option transport.address-family inet6" option is present in glusterd.vol file, it is made sure that glusterd creates listeners using ipv6 sockets only and also the same information is saved inside brick volume files used by glusterfsd brick process when they are starting. Tests Run: Regression tests using ./run-tests.sh IPv4: Ran manually till tests/basic/rpm.t . IPv6: (Need to add the above mentioned config and also add an entry for "hostname ::1" in /etc/hosts) Started failing at ./tests/basic/glusterd/arbiter-volume-probe.t and ran successfully till here Unit Tests using Ipv6 peer probe add-bricks remove-bricks create volume replace-bricks start volume stop volume delete volume Change-Id: Iebc96e6cce748b5924ce5da17b0114600ec70a6e BUG: 1117886 Signed-off-by: Nithin D <nithind1988@yahoo.in> Reviewed-on: http://review.gluster.org/11988 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol: implement seek() FOPNiels de Vos2016-02-041-0/+1
| | | | | | | | | | | | | | | Network protocol extensions for the seek() FOP. The format is based on the SEEK procedure in NFSv4.2. Change-Id: I060768a8a4b9b1c80f4a24c0f17d630f7f028690 BUG: 1220173 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11482 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: cli command implementation for bitrot scrub statusGaurav Kumar Garg2015-11-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CLI command for bitrot scrub status will be : gluster volume bitrot <volname> scrub status Above command will show the statistics of bitrot scrubber. Upon execution of this command it will show some common scrubber tunable value of volume <VOLNAME> followed by statistics of scrubber statistics of individual nodes. sample ouput for single node: Volume name : <VOLNAME> State of scrub: Active Scrub frequency: biweekly Bitrot error log location: /var/log/glusterfs/bitd.log Scrubber error log location: /var/log/glusterfs/scrub.log ========================================================= Node name: Number of Scrubbed files: Number of Unsigned files: Last completed scrub time: Duration of last scrub: Error count: ========================================================= This is just infrastructure. list of bad file, last scrub time, error count value will be taken care by http://review.gluster.org/#/c/12503/ and http://review.gluster.org/#/c/12654/ patches. Change-Id: I3ed3c7057c9d0c894233f4079a7f185d90c202d1 BUG: 1207627 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10231 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: install and package header files more conventionallyKaleb S. KEITHLEY2015-11-161-1/+3
| | | | | | | | | | | | | | The current way we install and package header files for the -devel package is a hack. This patch uses more conventional autoconf, libtool, and rpmbuild idioms to package -devel headers and libraries. Change-Id: I63ffb3460f5c12b6b355493bd00824ac9e5354c5 BUG: 1271907 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12360 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* server/protocol: option for dynamic authorization of client permissionsPrasanna Kumar Kalever2015-10-042-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | problem: assuming gluster volume is already mounted (for gfapi: say client transport connection has already established), now if somebody change the volume permissions say *.allow | *.reject for a client, gluster should allow/terminate the client connection based on the fresh set of volume options immediately, but in existing scenario neither we have any option to set this behaviour nor we take any action until and unless we remount the volume manually solution: Introduce 'dynamic-auth' option (default: on). If 'dynamic-auth' is 'on' gluster will perform dynamic authentication to allow/terminate client transport connection immediately in response to *.allow | *.reject volume set options, thus if volume permissions have changed for a particular client (say client is added to auth.reject list), his transport connection to gluster volume will be terminated immediately. Change-Id: I6243a6db41bf1e0babbf050a8e4f8620732e00d8 BUG: 1245380 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/12229 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rpc: Remove unused functionAnoop C S2015-10-011-8/+0
| | | | | | | | | | Change-Id: I0b96b83ad8d06de9b2f5fc14073b94777885a775 BUG: 1261927 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/12153 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/tier: add gluster v tier <vol>Dan Lambright2015-09-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Currently the tier feature piggy backs off the rebalance command syntax to obtain status and this is clumsy. Introduce a new tier command that can do tier specific operations, starting with volume status to display counters. Old commands: gluster volume attach-tier <vol> [replica count] {bricklist..} gluster volume detach-tier <vol> {start|stop|commit} New commands: gluster volume tier <vol> attach [replica count] {bricklist} | detach {start|stop|commit} | status Change-Id: Ic07b3c6260588162de7d34380f8cbd3d8a7f35d3 BUG: 1255693 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/11984 Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* all: reduce "inline" usageJeff Darcy2015-09-013-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155 BUG: 1245331 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/11769 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* rpc: add owner xlator argument to rpc_clnt_newKrishnan Parthasarathi2015-08-122-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The @owner argument tells RPC layer the xlator that owns the connection and to which xlator THIS needs be set during network notifications like CONNECT and DISCONNECT. Code paths that originate from the head of a (volume) graph and use STACK_WIND ensure that the RPC local endpoint has the right xlator saved in the frame of the call (callback pair). This guarantees that the callback is executed in the right xlator context. The client handshake process which includes fetching of brick ports from glusterd, setting lk-version on the brick for the session, don't have the correct xlator set in their frames. The problem lies with RPC notifications. It doesn't have the provision to set THIS with the xlator that is registered with the corresponding RPC programs. e.g, RPC_CLNT_CONNECT event received by protocol/client doesn't have THIS set to its xlator. This implies, call(-callbacks) originating from this thread don't have the right xlator set too. The fix would be to save the xlator registered with the RPC connection during rpc_clnt_new. e.g, protocol/client's xlator would be saved with the RPC connection that it 'owns'. RPC notifications such as CONNECT, DISCONNECT, etc inherit THIS from the RPC connection's xlator. Change-Id: I9dea2c35378c511d800ef58f7fa2ea5552f2c409 BUG: 1235582 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/11436 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rpc-clnt: Check for transport object during rpc connection cleanupSoumya Koduri2015-08-081-3/+7
| | | | | | | | | | | | | | | | | While doing glfs_fini(), all the xlators are first notified of PARENT_DOWN. protocol-client xlator on receving that notification does rpc_clnt_disable which disassociates rpc->conn with its transport object and does socket shutdown. So any further references to conn->trans should not happen during rpc connection cleanup which is done mainly as part of epoll event handling of EPOLLERR/EPOLLHUP. BUG: 1250797 Change-Id: I7d0346451d40372ad59a6a2326176fbb1e694712 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/11845 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* client, rpc: make ping-timeout configurable for glusterfs clientsKrishnan Parthasarathi2015-08-052-0/+16
| | | | | | | | | | Change-Id: Idd94adb0457aaffce7330f56f98cebafa2c4dae8 BUG: 1249499 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/11818 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
generated by cgit (git 2.34.1) at 2024-11-20 15:22:13 +0000