summaryrefslogtreecommitdiffstats
path: root/rpc/xdr
Commit message (Collapse)AuthorAgeFilesLines
...
* feature/bitrot: Ondemand scrub option for bitrotKotresh HR2016-08-252-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The bitrot scrubber takes 'hourly/daily/biweekly/monthly' as the values for 'scrub-frequency'. There is no way to schedule the scrubbing when the admin wants it. Ondemand scrubbing brings in the new option 'ondemand' with which the admin can start scrubbing ondemand. It starts the scrubbing immediately. Ondemand scrubbing is successful only if the scrubber is in 'Active (Idle)' (waiting for it's next frequency cycle to start scrubbing). It is not entertained when the scrubber is in 'Paused' or already running. Here is the command line syntax. gluster volume bitrot <vol name> scrub ondemand Change-Id: I84c28904367eed827a7dae8d6a535c14b28e9f4d BUG: 1366195 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15111 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* snapshot/cli: Fix snapshot status xml outputAvra Sengupta2016-08-231-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | snap status --xml errors out if a brick is down and doesn't have pid. It is handled in the cli of the snap status where "N/A" is displayed in such a scenario. Handled the same in xml snap status <snapname> --xml fails as the writer is not initialised for the same. Using GF_SNAP_STATUS_TYPE_ITER instead of GF_SNAP_STATUS_TYPE_SNAP for all snap's status to differentiate between the two scenarios. Added testcase volume-snapshot-xml.t to check all snapshot commands xml outputs Change-Id: I99563e8f3e84f1aaeabd865326bb825c44f5c745 BUG: 1325831 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14018 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* mgmt: remove unused and misleading pmap_signupJeff Darcy2016-07-071-11/+0
| | | | | | | | | | | | | | | We use signin, but not signup. Having both just introduces confusion. The proc number has been retained to avoid changes to the numbering of other procs, and the mapping to a name has similarly been retained as a placeholder, but the code and structure definitions have been removed. Change-Id: I60f64f3b5d71ba6ed6862b36a38f90a9c8271c9f Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/14792 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* protocol: Add framework to send transaction id with recallPoornima G2016-06-102-7/+25
| | | | | | | | | | | | | | | | | | | | | | | | | Issue: The upcall(cache invalidation/recall) event is sent from the bricks to clients. In AFR/EC setup, it can so happen that all the bricks will send the upcall for the same event, and if AFR/EC doesn't filter out these duplicate notifications, the logic above cluster xlators can fail. Solution: Use transaction id to filter out duplicate notifications. This patch adds framework for duplicate notifications. AFR/EC can build up on this patch for deduping the notifications Change-Id: I66b08e63b8799bc5932f2b2545376138a5701168 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/14647 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* xdr/nfs: free complete groupnode structureBipin Kunal2016-06-071-4/+14
| | | | | | | | | | | | | | | | | | | | The groupnode->gr_next pointer is not traversed upon free. This is currently not a problem, because the pointer is never used. However the correct way to free a groupnode should check the ->gr_next pointer and free any of the groups that it encounters. This problem was identified while correcting a problem with the MOUNT protocol. The change "nfs: build exportlist with multiple groups" starts to use ->gr_next. Change-Id: I9d04eaf4c65bdb8db136321d60e70789da1739d7 BUG: 1343286 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14666 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: bipin kunal <kunalbipin@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* core: Honour mandatory lock flags during lock migrationAnoop C S2016-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | lk_flags from posix_lock_t structure is the primary key used to differentiate locks as either advisory and mandatory type. During lock migration this field is not read in getactivelk() call path. So in order to copy the exact lock state from source to destination it is necessary to include lk_flags within lock_migration_info_t structure to maintain accurate state. This change also includes minor modifications to setactivelk() call to consider lk_flags during lock migration. Change-Id: I20a7b6b6a0f3bdac5734cce8a2cd2349eceff195 BUG: 1332501 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/14189 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Susant Palai <spalai@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* upcall: pass dict with xattrs on xattr invalidationPoornima G2016-05-191-15/+29
| | | | | | | | | | | | | | | | | | In case of xattr invalidation, return a dict containing the updated xattrs. [ndevos: move chunks to change 12995 and only address the xattrs-dict here] Change-Id: I8733f06a519a9a0f24be1bb4b2c38c9c9dce0ce2 BUG: 1211863 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/12996 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: soumya k <skoduri@redhat.com>
* protocol: add setactivelk () fopSusant Palai2016-05-011-0/+12
| | | | | | | | | | | Change-Id: I60fe2d59c454095febce4c0fbef87a2dad9636e4 BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/14013 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* core: add setactivelk () fopSusant Palai2016-05-011-0/+1
| | | | | | | | | | | Change-Id: Ic2ba77a1fdd27801a6e579e04e6c0dd93cd7127b BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/14011 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* protocol: add getactivelk () fopSusant Palai2016-05-011-0/+18
| | | | | | | | | | | Change-Id: Ie38198db990f133fe163ba160cdf647e34f83f4f BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/13994 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* core: add getactivelk () fopSusant Palai2016-05-011-0/+1
| | | | | | | | | | | Change-Id: Ifd0ff278dcf43da064021f5c25e5dcd34347fcde BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/13970 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* protocol/client : Implementation of compound fopAnuradha Talur2016-04-301-0/+2
| | | | | | | | | | | Change-Id: Iade71daf3bc70e60833d693ac55151c9cf691381 BUG: 1303829 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/14114 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* Protocol: Add lease fopPoornima G2016-04-292-0/+80
| | | | | | | | | | | | Change-Id: I64c361d3e4ae86d57dc18bb887758d044c861237 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11597 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* rpc: added structures to support compound fopsAnuradha Talur2016-04-291-0/+119
| | | | | | | | | | | | | Change-Id: Ida81e7b3145fb09afa37353244ff8721a4dc4c6a BUG: 1303829 Signed-off-by: Anuradha Talur <atalur@redhat.com> [ndevos: move definitions around to align with changes for bug 1328502] Reviewed-on: http://review.gluster.org/13331 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* rpc: split FOPs enum from glusterfs.hNiels de Vos2016-04-288-1/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | Moving the enumeration of FOPs and some of the other parts that are defining the network protocol to the rpc/xdr/ section. These structures need some care when modifications are made, moving them out of the common glusterfs.h header helps with that. The protocol definition structures are generated in a new glusterfs-fops header. This file is present in rpc/xdr/src/ and libglusterfs/src/, it is a little ugly, but prevents the need to update all Makefile.am files with the additional -I option for finding the new header file. The generation of the .c and .h files from the .x descriptions needed small modifications to accommodate these changes. The build/xdrgen script was improved slightly for this. The .c and .h files are incorrectly in the $(top_srcdir), instead of $(top_builddir). This is an existing issue, and bug 1330604 has been filed to get that addressed. Change-Id: I98fc8cf7e4b631082c7b203b5a0a77111bec1fb9 BUG: 1328502 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14032 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol: implement seek() FOPNiels de Vos2016-02-041-0/+16
| | | | | | | | | | | | | | | Network protocol extensions for the seek() FOP. The format is based on the SEEK procedure in NFSv4.2. Change-Id: I060768a8a4b9b1c80f4a24c0f17d630f7f028690 BUG: 1220173 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11482 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* tier/glusterd : making new tier detach command throw warninghari gowtham2015-12-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | For detach tier, the validation was done using the string "detach-tier" but the new commands used has the string "tier". Making the string use "tier" to compare, creates problem as the tier status and tier detach have the keyword "tier". So tier detach and tier status were separated. and strtok was used to prevent the condition from passing when the volume name has a substring of "tier". (only the second word from the string is got and checked if the feature is tier) Problem: new detach tier command doesnt throw warnings like "not a tier volume" or " detach tier not started" respectively instead it prints empty output. Fix: while validate the volume is checked if its a tiered volume if yes it is checked if the detach tier is started, else a warning is thrown respectively. Change-Id: I94246d53b18ab0e9406beaf459eaddb7c5b766c2 BUG: 1288517 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/12883 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: cli command implementation for bitrot scrub statusGaurav Kumar Garg2015-11-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CLI command for bitrot scrub status will be : gluster volume bitrot <volname> scrub status Above command will show the statistics of bitrot scrubber. Upon execution of this command it will show some common scrubber tunable value of volume <VOLNAME> followed by statistics of scrubber statistics of individual nodes. sample ouput for single node: Volume name : <VOLNAME> State of scrub: Active Scrub frequency: biweekly Bitrot error log location: /var/log/glusterfs/bitd.log Scrubber error log location: /var/log/glusterfs/scrub.log ========================================================= Node name: Number of Scrubbed files: Number of Unsigned files: Last completed scrub time: Duration of last scrub: Error count: ========================================================= This is just infrastructure. list of bad file, last scrub time, error count value will be taken care by http://review.gluster.org/#/c/12503/ and http://review.gluster.org/#/c/12654/ patches. Change-Id: I3ed3c7057c9d0c894233f4079a7f185d90c202d1 BUG: 1207627 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10231 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: install and package header files more conventionallyKaleb S. KEITHLEY2015-11-161-1/+4
| | | | | | | | | | | | | | The current way we install and package header files for the -devel package is a hack. This patch uses more conventional autoconf, libtool, and rpmbuild idioms to package -devel headers and libraries. Change-Id: I63ffb3460f5c12b6b355493bd00824ac9e5354c5 BUG: 1271907 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12360 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/tier: add pause tier for snapshotsDan Lambright2015-10-211-1/+3
| | | | | | | | | | | | | | | | | | | | Snaps of tiered volumes cannot handle files undergoing migration. We implement a helper mechanism to "pause" migration. Any files undergoing migration are aborted. Clean up is done to remove sticky bits and data at the destination. Migration is restarted after snap completes. For testing an internal switch is added. It is not exposed externally. gluster volume set vol1 tier-pause [true|false] Change-Id: Ia85bbf89ac142e9b7e73fcbef98bb9da86097799 BUG: 1267950 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/12304 Reviewed-by: N Balachandran <nbalacha@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gluster/cli: snapshot delete all does not work with xmlRajesh Joseph2015-08-281-2/+4
| | | | | | | | | | | | | Problem: snapshot delete all command fails with --xml option Fix: Provided xml support for delete all command Change-Id: I77cad131473a9160e188c783f442b6a38a37f758 BUG: 1257533 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/12027 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com>
* features/bitrot: tuanble object signing waiting time value for bitrotGaurav Kumar Garg2015-06-151-0/+1
| | | | | | | | | | | | | | Currently bitrot using 120 second waiting time for object to be signed after all fop's released. This signing waiting time value should be tunable. Command for changing the signing waiting time will be #gluster volume bitrot <VOLNAME> signing-time <waiting time value in second> Change-Id: I89f3121564c1bbd0825f60aae6147413a2fbd798 BUG: 1228680 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/11105
* build: do not #include "config.h" in each fileNiels de Vos2015-05-292-10/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* build: do not include rpcgen generated files in "make dist"Niels de Vos2015-05-281-3/+6
| | | | | | | | | | | | | The .c and .h files are generated by rpcgen, there is no need to include them in the "make dist" tarball. BUG: 1198849 Change-Id: Ie6281720e4d485d2b84d98efccfc7053594d1542 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10897 Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cli/tiering: Enhance cli output for tieringMohammed Rafi KC2015-05-081-1/+2
| | | | | | | | | | | | | | Fix for handling cli output for attach-tier and detach-tier Change-Id: I4d17f4b09612754fe1b8cec6c2e14927029b9678 BUG: 1211562 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10284 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: remove replace brick with data migration support form cli/glusterdGaurav Kumar Garg2015-05-071-10/+0
| | | | | | | | | | | | | | | | Replace-brick operation with data migration support have been deprecated from gluster. With this fix replace brick command will support only one commad gluster volume replace-brick <VOLNAME> <SOURCE-BRICK> <NEW-BRICK> {commit force} Change-Id: Ib81d49e5d8e7eaa4ccb5830cfec2bc081191b43b BUG: 1094119 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10101 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* quota/marker: turn off inode quotas by defaultvmallika2015-05-061-0/+1
| | | | | | | | | | | | | | | | | | | | | inode quota is a new feature implemented in glusterfs-3.7 if quota is enabled in the older version and is upgraded to a new version, we can hit setxattr spike during self-heal of inode quotas. So, when a quota is enabled, turn off inode-quotas with a xlator option. With this patch, we still account for inode quotas but only when a write operation is performed for a particular file. User will be able to query inode quotas once the Inode-quota xlator option is enabled. Change-Id: I52fb28bf7024989ce7bb08ac63a303bf3ec1ec9a BUG: 1209430 Signed-off-by: vmallika <vmallika@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/10152 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Upcall: Send stat as part of cache_invalidation notificationsSoumya Koduri2015-05-051-0/+8
| | | | | | | | | | | | | | | | Have added support to send attributes of both entries and its parent (include oldparent in case of RENAME fop) in the same notification request to avoid multiple rpc requests. Also, made changes in gfapi to send parent object and its attributes changed in a single upcall event. Change-Id: I92833da3bcec38d65216921c2ce4d10367c32ef1 BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10460 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* rpc: Included necessary stats in 'gfs3_cbk_cache_invalidation_req'Soumya Koduri2015-05-041-0/+6
| | | | | | | | | | | | | | | To avoid extra network fops, it will benifit clients if the server can send the updated stat of the file/dir and of the parent directory (including oldparent in case of RENAME fop) while sending GF_CBK_CACHE_INVALIDATION upcall event. This patch handles rpc protocol changes. Change-Id: Ic096a61c4d24a8d75a8285be78deb237d7ef9484 BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10452 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: gluster volume status should show status of bitrot and scrubber daemonGaurav Kumar Garg2015-05-041-16/+18
| | | | | | | | | | | | | | | | | | | | | | | | Command gluster volume status <VOLNAME> should show the status of bitrot and scrubber daemon and its pid information. Along with displaying bitrot and scrubber daemon information in gluster volume status command there should be command to show its individual status separately. Command to show individual status of bitrot and scrubber daemon will following. command to show only bitd daemon information will be gluster volume status <VOLNAME> bitd command to show only scrubber daemon information gluster volume status <VOLNAME> scrub Change-Id: Id86aae1156c8c599347c98e2a538f294d37376e4 BUG: 1209752 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10175 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com>
* Upcall: Replaced opaque gfid with string in rpc cbk argsSoumya Koduri2015-04-302-4/+13
| | | | | | | | | | | | | | For GF_CBK_CACHE_INVALIDATION, have changed the type of gfid to be string (cannonical form) instead of opaque byte format to ensure correctness across platforms supporting different endianness. BUG: 1200262 Change-Id: Iac4372714f4b4ebcd9c4393aaf46ceba3f37f587 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10224 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Upcall: Process each of the upcall events separatelySoumya Koduri2015-04-302-17/+40
| | | | | | | | | | | | | | | | As suggested during the code-review of Bug1200262, have modified GF_CBK_UPCALL to be exlusively GF_CBK_CACHE_INVALIDATION. Thus, for any new upcall event, a new CBK procedure will be added. Also made changes to store upcall data separately based on the upcall event type received. BUG: 1200262 Change-Id: I0f5e53d6f5ece16aecb514a0a426dca40fa1c755 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10049 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* quota: display error when inode-quota cmds executed with cluster ver < 3.7vmallika2015-04-271-0/+1
| | | | | | | | | | | | | | | | | | | In a heterogeneous cluster with op_version less than 3.7, inode quotas will be accounted on those bricks which has glusterfs version 3.7 and this is not available in older version. This will have incorrect values displayed when user queries inode count from CLI. This patch will display error when inode-quota commands are executed with cluster version less than 3.7 Change-Id: Ia0e6d5635d1d8e7b2e2cfc3daa7b7f9e314a263a BUG: 1212253 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/10261 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: fix vol_type in volume info xmlAtin Mukherjee2015-04-261-1/+2
| | | | | | | | | | | | xml parsing of voltype should be inline with the cli Change-Id: I41ddddac00d07f03b56a041e1c3f5a132fbd7393 BUG: 1212398 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10271 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: support for tier volumes 'detach start' and 'detach commit'Dan Lambright2015-04-221-2/+6
| | | | | | | | | | | | | | | | | | | | | These commands work in a manner analagous to rebalancing when removing a brick. The existing migration daemon detects "detach start" and switches to moving data off the hot tier. While in this state all lookups are directed to the cold tier. gluster v detach-tier <vol> start gluster v detach-tier <vol> commit The status and stop cli commands shall be submitted separately. Change-Id: I24fda5cc3ba74f5fb8aa9a3234ad51f18b80a8a0 BUG: 1205540 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: root <root@localhost.localdomain> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/10108 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: NetBSD Build System
* build: add more files to .gitignoreNiels de Vos2015-04-061-6/+8
| | | | | | | | | Change-Id: Icef0d7f443f7caf3aa386d3a6978f98cf3a5a4af BUG: 1198849 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10132 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: CLI commands to create and manage tiered volumes.Dan Lambright2015-03-191-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A tiered volume is a normal volume with some number of new bricks representing "hot" storage. The "hot" bricks can be attached or detached dynamically to a normal volume. When this happens, a new graph is constructed. The root of the new graph is an instance of the tier translator. One subvolume of the tier translator leads to the old volume, and another leads to the new hot bricks. attach-tier <VOLNAME> [<replica> <COUNT>] <NEW-BRICK> ... [force] volume detach-tier <VOLNAME> [replica <COUNT>] <BRICK> ... <start|stop|status|commit|force> gluster volume rebalance <volume> tier start gluster volume rebalance <volume> tier stop gluster volume rebalance <volume> tier status The "tier start" CLI command starts a server side daemon. The daemon initiates file level migration based on caching policies. The daemon's status can be monitored and stopped. Note development on the "tier status" command is incomplete. It will be added in a subsequent patch. When the "hot" storage is detached, the tier translator is removed from the graph and the tiered volume reverts to its original state as described in the volume's info file. For more background and design see the feature page [1]. [1] http://www.gluster.org/community/documentation/index.php/Features/data-classification Change-Id: Ic8042ce37327b850b9e199236e5be3dae95d2472 BUG: 1194753 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9753 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: cli command implementation for bitrot featuresGaurav Kumar Garg2015-03-181-0/+10
| | | | | | | | | | | | | | | | | CLI command for bitrot features. volume bitrot <volname> enable|disable Above command will enable/disable bitrot feature for particular volume. BUG: 1170075 Change-Id: Ie84002ef7f479a285688fdae99c7afa3e91b8b99 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Anand nekkunti <anekkunt@redhat.com> Signed-off-by: Dominic P Geevarghese <dgeevarg@redhat.com> Reviewed-on: http://review.gluster.org/9866 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota : Introducing inode quotavmallika2015-03-181-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ========================================================================== Inode quota ========================================================================== = Currently, the only way to retrieve the number of files/objects in a = = directory or volume is to do a crawl of the entire directory/volume. = = This is expensive and is not scalable. = = = = The proposed mechanism will provide an easier alternative to determine = = the count of files/objects in a directory or volume. = = = = The new mechanism proposes to store count of objects/files as part of = = an extended attribute of a directory. Each directory's extended = = attribute value will indicate the number of files/objects present = = in a tree with the directory being considered as the root of the tree. = = = = The count value can be accessed by performing a getxattr(). = = Cluster translators like afr, dht and stripe will perform aggregation = = of count values from various bricks when getxattr() happens on the key = = associated with file/object count. = A new interface is introduced: ------------------------------ limit-objects : limit the number of inodes at directory level list-objects : list the directories where the limit is set remove-objects : remove the limit from the directory ========================================================================== CLI COMMAND: gluster volume quota <volname> limit-objects <path> <number> [<percent>] * <number> is a hard-limit for number of objects limitation for path "<path>" If hard-limit is exceeded, creation of file/directory is no longer permitted. * <percent> is a soft-limit for number of objects creation for path "<path>" If soft-limit is exceeded, a warning is issued for each creation. CLI COMMAND: gluster volume quota <volname> remove-objects [path] ========================================================================== CLI COMMAND: gluster volume quota <volname> list-objects [path] ... Sample output: ------------------ Path Hard-limit Soft-limit Used Available Soft-limit exceeded? Hard-limit exceeded? ------------------------------------------------------------------------ -------------------------------------- /dir 10 80% 10 0 Yes Yes ========================================================================== [root@snapshot-28 dir]# ls a b file11 file12 file13 file14 file15 file16 file17 [root@snapshot-28 dir]# touch a1 touch: cannot touch `a1': Disk quota exceeded * Nine files are created in directory "dir" and directory is included in * the count too. Hence the limit "10" is reached and further file creation fails ========================================================================== Note: We have also done some re-factoring in cli for volume name validation. New function cli_validate_volname is created ========================================================================== Change-Id: I1823497de4f790a2a20ebb1770293472ea33ee2b BUG: 1190108 Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9769 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: RPC'fy {libgf}changelogVenky Shankar2015-03-182-1/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces RPC based communication between the changelog translator and libgfchangelog. It replaces the old pathetic stream based interaction that existed earlier (due to time constraints :-/). Changelog, upon initialization starts a RPC server (rpcsvc) allowing clients to invoke a probe API as a bootup mechanism to request for event notifications. During probe, clients can choose an event filter specifying the type(s) of events they are interested in. As of now there is no way to change the event notification set once the probe RPC call is made, but that is easier to implement. The actual event notifications is done on a separate RPC session. The client (libgfchangelog) itself starts and RPC server which the changelog translator "connects back" during probe. Notifications are dispatched by a bunch of threads from the server (translator) and the client optionally orders them if ordered notifications are requried. FOPs fill in their respective event details in a buffer (rot-buffs to be particular) and a bunch of threads (consumers) swap the buffers out of roatation and dispatch them via RPC. To avoid writer starvation, then number of dispatcher threads is one less than the number of buffer list in rot-buffs.x libgfchangelog becomes purely callback based -- upon event notification from the server (and re-ordering them if required) invoke a callback routine specified by consumer(s). A major part of the patch is also aimed at providing backward compatibility for geo-replication, which was one of the main consumer of the stream based API. Also, this patch does not\ "turn on" event notifications for all fops, just a bunch which is currently in requirement. Another pain point is that the server does not filter events before dispatching it to the clients. That load is taken up by the client itself (although it's done at the library layer rather than making it hard on the callback implementor). This needs improvement and care needs to be taken to not load the server up with expensive filtering mechanisms. Change-Id: Ibf60a432b68f2dfa60c6f9add2bcfd37a9c41395 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9708 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Snapshot/clone: clone of a snapshot that will act as a regular volumeMohammed Rafi KC2015-03-181-0/+1
| | | | | | | | | | | | | | | | | snapshot clone will allow us to take a snpahot of a snapshot. Newly created clone volume will be a regular volume with read/write permissions. CLI command snapshot clone <clonename> <snapname> Change-Id: Icadb993fa42fff787a330f8f49452da54e9db7de BUG: 1199894 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9750 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: APIs to store and process upcall notifications receivedSoumya Koduri2015-03-171-0/+13
| | | | | | | | | | | | | | | | | | | | | | | In case of any upcall cbk events received by the protocol/client, gfapi will be notified which queues them up in a list (<gfapi_cbk_upcall>). Applicatons are responsible to provide APIs to process & notify them in case of any such upcall events queued. Added a new API which will be used by Ganesha to repeatedly poll for any such upcall event notified (<glfs_h_poll_upcall>). A new test-file has been added to test the cache_invalidation upcall events. Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Iafc6880000c865fd4da22d0cfc388ec135b5a1c5 BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9536 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* every/where: add GF_FOP_IPC for inter-translator communicationJeff Darcy2015-03-171-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several features - e.g. encryption, erasure codes, or NSR - involve multiple cooperating translators which sometimes need a "private" means of communication amongst themselves. Historically we've used virtual or synthetic xattrs, but that's not very elegant and clutters up the getxattr/setxattr path which must also handle real xattr requests. This new fop should address that. The only argument is an int32_t "op" which should be recognized by the target translator. It is recommended that translators using these feature follow some convention regarding the ops that they define, to avoid conflicts. Using a hash of the target translator's type string as a base for a series of ops would probably be a good start. Any other information can be passed in both directions using xdata. The default behavior for this fop, as with any other, is to pass through to FIRST_CHILD. That makes use of this fop "transparent" to other translators that were written before it existed, but it also means that it only really works with pass-through translators. If a routing translator (such as DHT) or a fan-out translator (such as AFR) is involved, the IPC might not reach its intended destination unless those translators are modified to forward IPC fops along all paths. If an IPC gets all the way to storage/posix it is considered an error, much like an uncaught exception. We don't actually *do* anything in that case, but we do log it send back an EOPNOTSUPP error. This makes the "unrecognized opcode" condition distinguishable from the "no IPC support" condition (which would yield an RPC error instead) so clients can probe for the presence of a handler for their own favorite opcode and either use that or use old-school xattrs depending on the result. BUG: 1158628 Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I84af1b17babe5b30ec03ecf027ae37d09b873968 Reviewed-on: http://review.gluster.org/8812 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Upcall: New xlator to store various states and send cbk eventsSoumya Koduri2015-03-172-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | Framework on the server-side, to handle certain state of the files accessed and send notifications to the clients connected. A generic and extensible framework, used to maintain states in the glusterfsd process for each of the files accessed (including the clients info doing the fops) and send notifications to the respective glusterfs clients incase of any change in that state. This patch handles "Inode Update/Invalidation" upcall event. Feature page: URL: http://www.gluster.org/community/documentation/index.php/Features/Upcall-infrastructure Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Ie3d724be9a3419fcf18901a753e8ec2df2ac802f BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9535 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rdma:rdma fuse mount hangs for tcp,rdma volumes if brick is down.Mohammed Rafi KC2014-11-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | When we try to mount a tcp,rdma volume as rdma transport using FUSE protocol, then mount will hang if the brick is down. When we kill a process, signal will be received in glusterfsd process and it will call pmap_signout with port listening on tcp only. In case of the tcp,rdma there will be two ports, and port which is listening for rdma will not called for sign out. So the mount process will try to connect to a port which is not open and it will keep trying to connect. This patch will call pmap_signout for rdma port also, So when mount tries to get the brick port,it will fail. Change-Id: I23676f65f96eb90b69b76478f7a21412a6aba70f BUG: 1143886 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/8762 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* Build fix: xdrgenEmmanuel Dreyfus2014-11-131-54/+19
| | | | | | | | | | | | | | | | | | | | As discovered in https://review.gluster.org/8762, BSD systems fail to run xdrgen during glusterfs build. This seems to be caused by a difference between BSD make and GNU make whith implcit targets. The former seems to use absolute path here, which means we should not prepend it with the current directory path, otherwise we have the directory path twice and the files cannot be found my make. This is a second attempt after I178123bf6f3d9e963ff5b78839d498f530c05a97 which was broken and reverted in I3c8966288f66d0eafa2e94490e3b64a057b4f2c0 BUG: 1157839 Change-Id: I797c536c319a156b71a42c82cbaf80bbf17b7234 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/9046 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Revert "Build fix: xdrgen"Niels de Vos2014-11-041-36/+36
| | | | | | | | | | | | | | | | This reverts commit 12bc39c144aa41a097435f2aab304ddfbbb9b625 This causes all regression tests to fail. Reverting for now, we can include a correct fix later. Change-Id: I3c8966288f66d0eafa2e94490e3b64a057b4f2c0 URL: http://supercolony.gluster.org/pipermail/gluster-devel/2014-November/042759.html BUG: 1157839 Reported-by: Emmanuel Dreyfus <manu@netbsd.org> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9040 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Build fix: xdrgenEmmanuel Dreyfus2014-11-021-36/+36
| | | | | | | | | | | | | | | | | As discovered in https://review.gluster.org/8762, BSD systems fail to run xdrgen during glusterfs build. This seems to be caused by a difference between BSD make and GNU make whith implcit targets. The former seems to use absolute path here, which means we should not prepend it with the current directory path, otherwise we have the directory path twice and the files cannot be found my make. BUG: 1157839 Change-Id: I178123bf6f3d9e963ff5b78839d498f530c05a97 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/9016 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* porting: OSX/Darwin 10.9 porting issuesHarshavardhana2014-08-122-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xdrproc_t() arguments are variadic and non-variadic On OSX > 10.9 ------------- typedef bool_t (*xdrproc_t)(XDR *, void *, unsigned int); On OSX < 10.9 ------------ typedef bool_t (*xdrproc_t)(XDR *, ...); FreeBSD all versions ------------ typedef bool_t (*xdrproc_t)(XDR *, ...); NetBSD 6.1.4 ----------- typedef bool_t (*xdrproc_t)(XDR *, const void *); Linux all versions ----------- typedef bool_t (*xdrproc_t)(XDR *, void *,...); This weird and odd implementations across various platforms should be handled properly. Change-Id: Iad8b7da2e5b82526bf3708cff31ab10ce09f59c9 BUG: 1128820 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8458 Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-08-071-0/+14
| | | | | | | | | | | | | | | | | | | | | | - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I2339a0d9275de5939ccad3e52b535598064a35e7 BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8246 Tested-by: Gluster Build System <jenkins@build.gluster.com>
generated by cgit (git 2.34.1) at 2024-11-19 19:22:59 +0000