summaryrefslogtreecommitdiffstats
path: root/rpc/xdr
Commit message (Collapse)AuthorAgeFilesLines
* ctime: Set mdata xattr on legacy filesKotresh HR2019-08-064-1/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: The files which were created before ctime enabled would not have "trusted.glusterfs.mdata"(stores time attributes) xattr. Upon fops which modifies either ctime or mtime, the xattr gets created with latest ctime, mtime and atime, which is incorrect. It should update only the corresponding time attribute and rest from backend Solution: Creating xattr with values from brick is not possible as each brick of replica set would have different times. So create the xattr upon successful lookup if the xattr is not created Note To Reviewers: The time attributes used to set xattr is got from successful lookup. Instead of sending the whole iatt over the wire via setxattr, a structure called mdata_iatt is sent. The mdata_iatt contains only time attributes. Backport of: > Patch: https://review.gluster.org/22936 > Change-Id: I5e535631ddef04195361ae0364336410a2895dd4 > BUG: 1593542 > Signed-off-by: Kotresh HR <khiremat@redhat.com> Change-Id: I5e535631ddef04195361ae0364336410a2895dd4 updates: bz#1733885 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* dict: handle STR_OLD data type in xdr conversionsAmar Tumballi2019-03-082-0/+3
| | | | | | | | | | | | | | | | | Currently a dict conversion on wire for 3.x protocol happens using `dict_unserialize()`, which sets the type of data as STR_OLD. But the new protocol doesn't send it over the wire as its not considered as a valid format in new processes. But considering we deal with old and new protocol when we do a rolling upgrade, it will allow us to get all the information properly with new protocol. Credits: Krutika Dhananjay Fixes: bz#1686364 Change-Id: I165c0021fb195b399790b9cf14a7416ae75ec84f Signed-off-by: Amar Tumballi <amarts@redhat.com>
* core: move logs which are only developer relevant to DEBUG levelAmar Tumballi2019-01-231-1/+1
| | | | | | | | | | | We had only changed the log level to DEBUG in release branch earlier. But considering 90%+ of our deployments happen in same env, we can look at these specific logs on need basis. With this change, the master branch will be easier to debug with lesser logs. Change-Id: I4157a7ec7d5ec9c2948b2bbc1e4cb8317f28d6b8 Updates: bz#1666833 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* copy_file_range support in GlusterFSRaghavendra Bhat2018-12-123-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * libglusterfs changes to add new fop * Fuse changes: - Changes in fuse bridge xlator to receive and send responses * posix changes to perform the op on the backend filesystem * protocol and rpc changes for sending and receiving the fop * gfapi changes for performing the fop * tools: glfs-copy-file-range tool for testing copy_file_range fop - Although, copy_file_range support has been added to the upstream fuse kernel module, no release has been made yet of a kernel which contains the support. It is expected to come in the upcoming release of linux-4.20 So, as of now, executing copy_file_range fop on a fused based filesystem results in fuse kernel module sending read on the source fd and write on the destination fd. Therefore a small gfapi based tool has been written to be able test the copy_file_range fop. This tool is similar (in functionality) to the example program given in copy_file_range man page. So, running regular copy_file_range on a fuse mount point and running gfapi based glfs-copy-file-range tool gives some idea about how fast, the copy_file_range (or reflink) can be. On the local machine this was the result obtained. mount -t glusterfs workstation:new /mnt/glusterfs [root@workstation ~]# cd /mnt/glusterfs/ [root@workstation glusterfs]# ls file [root@workstation glusterfs]# cd [root@workstation ~]# time /tmp/a.out /mnt/glusterfs/file /mnt/glusterfs/new real 0m6.495s user 0m0.000s sys 0m1.439s [root@workstation ~]# time glfs-copy-file-range $(hostname) new /tmp/glfs.log /file /rrr OPEN_SRC: opening /file is success OPEN_DST: opening /rrr is success FSTAT_SRC: fstat on /rrr is success copy_file_range successful real 0m0.309s user 0m0.039s sys 0m0.017s This tool needs following arguments 1) hostname 2) volume name 3) log file path 4) source file path (relative to the gluster volume root) 5) destination file path (relative to the gluster volume root) "glfs-copy-file-range <hostname> <volume> <log file path> <source> <destination>" - Added a testcase as well to run glfs-copy-file-range tool * io-stats changes to capture the fop for profiling * NOTE: - Added conditional check to see whether the copy_file_range syscall is available or not. If not, then return ENOSYS. - Added conditional check for kernel minor version in fuse_kernel.h and fuse-bridge while referring to copy_file_range. And the kernel minor version is kept as it is. i.e. 24. Increment it in future when there is a kernel release which contains the support for copy_file_range fop in fuse kernel module. * The document which contains a writeup on this enhancement can be found at https://docs.google.com/document/d/1BSILbXr_knynNwxSyyu503JoTz5QFM_4suNIh2WwrSc/edit Change-Id: I280069c814dd21ce6ec3be00a884fc24ab692367 updates: #536 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* libglusterfs: Move devel headers under glusterfs directoryShyamsundarR2018-12-0515-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | libglusterfs devel package headers are referenced in code using include semantics for a program, this while it works can be better especially when dealing with out of tree xlator builds or in general out of tree devel package usage. Towards this, the following changes are done, - moved all devel headers under a glusterfs directory - Included these headers using system header notation <> in all code outside of libglusterfs - Included these headers using own program notation "" within libglusterfs This change although big, is just moving around the headers and making it correct when including these headers from other sources. This helps us correctly include libglusterfs includes without namespace conflicts. Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b Updates: bz#1193929 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* glusterfsd: Make each multiplexed brick sign inPrashanth Pai2018-11-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | NOTE: This change will be consumed by brick mux implementation of glusterd2 only. No corresponsing change in glusterd1 has been made. When a multiplexed brick process is shutting down, it sends sign out requests to glusterd for all bricks that it contains. However, sign in request is only sent for a single brick. Consequently, glusterd has to use some tricky means to repopulate pmap registry with information of multiplexed bricks during glusterd restart. This change makes each multiplexed brick send a sign in request to glusterd2 which ensures that glusterd2 can easily repopulate pmap registry with port information. As a bonus, sign in request will now also contain PID of the brick sending the request so that glusterd2 can rely on this instead of having to read/manage brick pidfiles. Change-Id: I409501515bd9a28ee7a960faca080e97cabe5858 updates: bz#1193929 Signed-off-by: Prashanth Pai <ppai@redhat.com>
* Land part 2 of clang-format changesGluster Ant2018-09-123-1615/+1528
| | | | | Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4 Signed-off-by: Nigel Babu <nigelb@redhat.com>
* Land clang-format changesGluster Ant2018-09-124-1421/+1583
| | | | Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b
* multiple files: calloc -> mallocYaniv Kaul2018-09-041-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xlators/cluster/stripe/src/stripe-helpers.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/tier.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-layout.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-helper.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-common.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/afr/src/afr.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/afr/src/afr-inode-read.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/bugs/replicate/bug-1250170-fsync.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/basic/gfapi/gfapi-async-calls-test.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/basic/ec/ec-fast-fgetxattr.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/xdr/src/glusterfs3.h: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/rpc-transport/socket/src/socket.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/rpc-lib/src/rpc-clnt.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible extras/geo-rep/gsync-sync-gfid.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-xml-output.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-rpc-ops.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-volume.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-system.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-snapshot.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-peer.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-global.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible It doesn't make sense to calloc (allocate and clear) memory when the code right away fills that memory with data. It may be optimized by the compiler, or have a microscopic performance improvement. In some cases, also changed allocation size to be sizeof some struct or type instead of a pointer - easier to read. In some cases, removed redundant strlen() calls by saving the result into a variable. 1. Only done for the straightforward cases. There's room for improvement. 2. Please review carefully, especially for string allocation, with the terminating NULL string. Only compile-tested! updates: bz#1193929 Original-Author: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Amar Tumballi <amarts@redhat.com> Change-Id: I16274dca4078a1d06ae09a0daf027d734b631ac2
* Fix a grammar error in the logsNigel Babu2018-08-131-1/+1
| | | | | | Change-Id: Ie4fe18d5094c051fa20de71f7fc841085cc6aaee Fixes: bz#1614142 Signed-off-by: Nigel Babu <nigelb@redhat.com>
* All: run codespell on the code and fix issues.Yaniv Kaul2018-07-221-1/+2
| | | | | | | | | | | | Please review, it's not always just the comments that were fixed. I've had to revert of course all calls to creat() that were changed to create() ... Only compile-tested! Change-Id: I7d02e82d9766e272a7fd9cc68e51901d69e5aab5 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* protocol: utilize the version 4 xdrAmar Tumballi2018-02-011-0/+7
| | | | | | | updates #384 Change-Id: Id80bf470988dbecc69779de9eb64088559cb1f6a Signed-off-by: Amar Tumballi <amarts@redhat.com>
* protocol: Implement put fopPoornima G2018-01-312-0/+13
| | | | | | Updates #353 Change-Id: I755b9208690be76935d763688fa414521eba3a40 Signed-off-by: Poornima G <pgurusid@redhat.com>
* build: Add new glusterfs4 source files to gitignoreAnoop C S2018-01-301-0/+2
| | | | | Change-Id: I4e6439d0f1ab55528c0f7e23c437c7b62628b8e4 Signed-off-by: Anoop C S <anoopcs@redhat.com>
* build: restore ability to control verbosity settingsJan Engelhardt2018-01-261-2/+2
| | | | | | | | | | | | | | | `make V=1` is broken — no commands are printed whatsoever. At the same time, `make V=0` *also* is broken in that no summary lines ("CC  foo.o") are printed, either. Kill the annoying hardcoded --quiet in configure.ac, since it seems to override everything that automake offers. Change-Id: I377c0e0469619a33586afb4a93dde6d241e7bc21 Fixes: #381 BUG: 1539023 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Niels de Vos <ndevos@redhat.com> [ndevos: silence rpc/xdr/gen rpgcen]
* build: use libtirpc by default, even if ipv6 is not the defaultKaleb S. KEITHLEY2018-01-261-1/+1
| | | | | | | | | | | | | | Another error snuck in with Change-Id I86f847dfd, or more accurately I think, with Change-Id: Ic47065e9c2... All libs, not just libgfrpc, need to be linked with libtirpc, especially on systems that still have xdr functions in (g)libc where you will get a mixture of calls to libtirpc functions and glibc functions, with catastrophic results. BUG: 1536186 Change-Id: I97dc39c7844f44c36fe210aa813480c219e1e415 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* protocol: make on-wire-change of protocol using new XDR definition.Amar Tumballi2018-01-193-29/+1169
| | | | | | | | | | | | | | | | | | | | | | With this patchset, some major things are changed in XDR, mainly: * Naming: Instead of gfs3/gfs4 settle for gfx_ for xdr structures * add iattx as a separate structure, and add conversion methods * the *_rsp structure is now changed, and is also reduced in number (ie, no need for different strucutes if it is similar to other response). * use proper XDR methods for sending dict on wire. Also, with the change of xdr structure, there are changes needed outside of xlator protocol layer to handle these properly. Mainly because the abstraction was broken to support 0-copy RDMA with payload for write and read FOP. This made transport layer know about the xdr payload, hence with the change of xdr payload structure, transport layer needed to know about the change. Updates #384 Change-Id: I1448fbe9deab0a1b06cb8351f2f37488cefe461f Signed-off-by: Amar Tumballi <amarts@redhat.com>
* rpc/*: auth-header changesAmar Tumballi2018-01-172-0/+26
| | | | | | | | | | | | | | | | | Introduce another authentication header which can now send more data. This is useful because this data can be common for all the fops, and we don't need to change all the signatures. As part of this, made rpc-clnt.c little more modular to support multiple authentication structures. stack.h changes are placeholder for the ctime etc, can be moved later based on need. updates #384 Change-Id: I6111c13cfd2ec92e2b4e9295896bf62a8a33b2c7 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* dict: add another type to handle backward compatibilityAmar Tumballi2018-01-171-0/+3
| | | | | | | | | | | | | | | | This new type helps to avoid excessive logs. It should be set only in case of * volume graph building (graph.y) * dict unserialize (happens once a dictionary is received on wire in old protocol) All other dict set and get should have proper check and warning logs if there is a mismatch. updates #220 Change-Id: I1cccb304a877aa80c07aaac95f10f5005e35b9c5 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* locks: added inodelk/entrylk contention upcall notificationsXavier Hernandez2018-01-163-0/+177
| | | | | | | | | | | | | | The locks xlator now is able to send a contention notification to the current owner of the lock. This is only a notification that can be used to improve performance of some client side operations that might benefit from extended duration of lock ownership. Nothing is done if the lock owner decides to ignore the message and to not release the lock. For forced release of acquired resources, leases must be used. Change-Id: I7f1ad32a0b4b445505b09908a050080ad848f8e0 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
* rpc: use export map to minimize exported symbols in libgf{rpc,xdr}.soKaleb S. KEITHLEY2018-01-122-2/+249
| | | | | | | | | | | | | | | | | | | | | | | | Without an export map (at link time) libgrpc and libgfxdr export over 150 and 450 symbols each, respectively. Many are not used by anything else. (Unclear what the unused symbols are, some may be simple sloppiness, e.g. not declaring functions static that should be. Others may be intra-library calls that can't be static but aren't part of the API, per se.) By linking with an export map the number of exported symbols is reduced to ~60 and ~250 respectively. This parallels the similar change made to libglusterfs recently and the older changes to the xlators to minimize the symbols that are visible (exported) from the .so. And I don't know, do we want to go all the way to symbol versions? For these libs? And for libglusterfs? fixes gluster/glusterfs#392 Change-Id: I9cdc3eee10e5f1408d7e7f2f29fad597c97e4003 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* dict: add more types for valuesAmar Tumballi2018-01-053-23/+31
| | | | | | | | | | Added 2 more types which are present in gluster codebase, mainly IATT and UUID. Updates #203 Change-Id: Ib6d6d6aefb88c3494fbf93dcbe08d9979484968f Signed-off-by: Amar Tumballi <amarts@redhat.com>
* dict: support better on-wire transferAmar Tumballi2017-12-273-0/+37
| | | | | | | | | | | | | | | This patch brings data type awareness to dictionary, and also makes sure valid data is properly sent to the other side of the wire using XDR. Next step is to allow people to add more data types (for example, Bool, UUID, iatt etc), and then make it part of every fop signature in wire. Fixes #203 Change-Id: Ie0eee2db847bea2bf7dad80dec89ce3e7c5917c1 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* rio/everywhere: add icreate/namelink fopSusant Palai2017-12-052-0/+29
| | | | | | | | | | | | | | | | | | | | | icreate creates inode, while namelink links the basename to it's parent gfid. For now mkdir is the primary user of these fops. Better distribution is acheived by creating the inode on ,(say) mds1 and linking the basename to it's parent gfid on mds2. The inode serves readdirp, stat etc. More details about the fops are present at: https://review.gluster.org/#/c/13395/3/design/DHT2/DHT2_Icreate_Namelink_Notes.md This backport of three patches from experimental branch. 1- https://review.gluster.org/#/c/18085/ 2- https://review.gluster.org/#/c/18086/ 3- https://review.gluster.org/#/c/18094/ Updates gluster/glusterfs#243 Change-Id: I1bd3d5a441a3cfab1acfeb52f15c6c867d362592 Signed-off-by: Susant Palai <spalai@redhat.com>
* libglusterfs: Add put fopPoornima G2017-12-051-0/+1
| | | | | | | | | | | | | | | | | Problem: It had been a longtime request to implement put fop in gluster. put fop in gluster may not have the exact sementics of HTTP PUT, but can be easily extended to do so. The subsequent patches, will contain more semantics on the put fop and its guarentees. Why compound fop framework is not used for put? Compound fop framework currently doesn't allow compounding of entry fop and inode fops, i.e. fops on multiple inodes cannot be combined in compound fop. Updates #353 Change-Id: Idb7891b3e056d46d570bb7e31bad1b6a28656ada Signed-off-by: Poornima G <pgurusid@redhat.com>
* xdr: comply with RFC4506Amar Tumballi2017-11-245-87/+87
| | | | | | Change-Id: I03098a54b8d37f6201129007cf31b31d97c30a23 BUG: 1336889 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* rpc: bring a new protocol versionAmar Tumballi2017-11-074-2/+36
| | | | | | | | | | * xdr: add gfid to on wire format for fsetattr/rchecksum * as it is change in on wire XDR format, needed backward compatible RPC programs. Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 827334 Change-Id: Id0a2da3632516dc1a5560dde2b151b2e5f0be8e5
* build: make it possible to build cleanly 2x in a rowNiels de Vos2017-10-131-1/+1
| | | | | | | | | | | | | | | | | 'make clean' does not cleanup everything, and some of the files get cleaned too eagerly. Several files are being packaged in a 'make dist' tarball, that get rebuild each time anyway. Specifically, this change prevents - libglusterfs/src/generator.pyc from laying around - keeping rpc/xdr/gen/*.x symlinks - modifying tests/basic/{fuse,gfapi}/Makefile each run - including tests/env.rc and events/src/eventtypes.py in the tarball Change-Id: I774dd1abf3a9d3b6a89b938cf6ee7d7792c59a82 BUG: 1501317 Reported-by: Patrick Matthäi <pmatthaei@debian.org> Signed-off-by: Niels de Vos <ndevos@redhat.com>
* Command to identify client processhari gowtham2017-09-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | command: gluster volume status <volname/all> client-list output: Client connections for volume v1 Name count ----- ------ fuse 2 tierd 1 total clients for volume v1 : 3 ----------------------------------------------------------------- Client connections for volume v2 Name count ----- ------ tierd 1 fuse.gsync 1 total clients for volume v2 : 2 ----------------------------------------------------------------- Updates: #178 Change-Id: I0ff2579d6adf57cc0d3bd0161a2ec6ac6c4747c0 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/18095 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Add option to get all volume options through get-state CLISamikshan Bairagya2017-07-251-1/+2
| | | | | | | | | | | | | | | | | | | | This commit makes the get-state CLI capable to returning the values for all volume options for all volumes. This is similar to what you get when you issue a `gluster volume get <volname> all` command. This is the new usage for the get-state CLI: # gluster get-state [<daemon>] [[odir </path/to/output/dir/>] \ [file <filename>]] [detail|volumeoptions] Fixes: #277 Change-Id: Ice52d936a5a389c6fa0ba5ab32416a65cdfde46d Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17858 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Gaurav Yadav <gyadav@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* glusterfs: Not able to mount running volume after enable brick mux and ↵Mohit Agrawal2017-05-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | stopped any volume Problem: After enabled brick mux if any volume has down and then try ot run mount with running volume , mount command is hung. Solution: After enable brick mux server has shared one data structure server_conf for all associated subvolumes.After down any subvolume in some ungraceful manner (remove brick directory) posix xlator sends GF_EVENT_CHILD_DOWN event to parent xlatros and server notify updates the child_up to false in server_conf.When client is trying to communicate with server through mount it checks conf->child_up and it is FALSE so it throws message "translator are not yet ready". From this patch updated structure server_conf to save child_up status for xlator wise. Another improtant correction from this patch is cleanup threads from server side xlators after stop the volume. BUG: 1453977 Change-Id: Ic54da3f01881b7c9429ce92cc569236eb1d43e0d Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: https://review.gluster.org/17356 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* build: 'make cscope' requires generated .c and .h XDR filesNiels de Vos2017-05-051-0/+4
| | | | | | | | | | | | | | | | | When running 'make cscope' on a clean configured tree (before building anything), it fails because of missing files unders rpc/xdr/src/. These files are symlinked from generated files in the rpc/xdr/gen/ directory. In order to create the symlinks for 'make cscope', a target needs to specify how these symlinks are created. Change-Id: I473c90e10d915ee438425cf0f806c0531b9f582a BUG: 1447966 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17176 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* Halo Replication feature for AFR translatorKevin Vigor2017-05-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Halo Geo-replication is a feature which allows Gluster or NFS clients to write locally to their region (as defined by a latency "halo" or threshold if you like), and have their writes asynchronously propagate from their origin to the rest of the cluster. Clients can also write synchronously to the cluster simply by specifying a halo-latency which is very large (e.g. 10seconds) which will include all bricks. In other words, it allows clients to decide at mount time if they desire synchronous or asynchronous IO into a cluster and the cluster can support both of these modes to any number of clients simultaneously. There are a few new volume options due to this feature: halo-shd-latency: The threshold below which self-heal daemons will consider children (bricks) connected. halo-nfsd-latency: The threshold below which NFS daemons will consider children (bricks) connected. halo-latency: The threshold below which all other clients will consider children (bricks) connected. halo-min-replicas: The minimum number of replicas which are to be enforced regardless of latency specified in the above 3 options. If the number of children falls below this threshold the next best (chosen by latency) shall be swapped in. New FUSE mount options: halo-latency & halo-min-replicas: As descripted above. This feature combined with multi-threaded SHD support (D1271745) results in some pretty cool geo-replication possibilities. Operational Notes: - Global consistency is gaurenteed for synchronous clients, this is provided by the existing entry-locking mechanism. - Asynchronous clients on the other hand and merely consistent to their region. Writes & deletes will be protected via entry-locks as usual preventing concurrent writes into files which are undergoing replication. Read operations on the other hand should never block. - Writes are allowed from _any_ region and propagated from the origin to all other regions. The take away from this is care should be taken to ensure multiple writers do not write the same files resulting in a gfid split-brain which will require resolution via split-brain policies (majority, mtime & size). Recommended method for preventing this is using the nfs-auth feature to define which region for each share has RW permissions, tiers not in the origin region should have RO perms. TODO: - Synchronous clients (including the SHD) should choose clients from their own region as preferred sources for reads. Most of the plumbing is in place for this via the child_latency array. - Better GFID split brain handling & better dent type split brain handling (i.e. create a trash can and move the offending files into it). - Tagging in addition to latency as a means of defining which children you wish to synchronously write to Test Plan: - The usual suspects, clang, gcc w/ address sanitizer & valgrind - Prove tests Reviewers: jackl, dph, cjh, meyering Reviewed By: meyering Subscribers: ethanr Differential Revision: https://phabricator.fb.com/D1272053 Tasks: 4117827 Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1 BUG: 1428061 Signed-off-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: http://review.gluster.org/16099 Reviewed-on: https://review.gluster.org/16177 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: Add client details to get-state outputSamikshan Bairagya2017-04-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This commit optionally adds client details corresponding to the locally running bricks to the get-state output. Since getting the client details involves sending RPC requests to the respective local bricks, this is a relatively more costly operation. These client details would be added to the get-state output only if the get-state command is invoked with the 'detail' option. This commit therefore also changes the get-state CLI usage. The modified usage is as follows: # gluster get-state [<daemon>] [[odir </path/to/output/dir/>] \ [file <filename>]] [detail] Change-Id: I42cd4ef160f9e96d55a08a10d32c8ba44e4cd3d8 BUG: 1431183 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17003 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* build: place generated XDR .h and .c files under $(top_builddir)Niels de Vos2017-04-041-5/+6
| | | | | | | | | | | | | Change-Id: I0487337223a54a52e73088cb6dd812ce6d47178d BUG: 1429696 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16994 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Tested-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: errors generating xdr stubs+headers with `make -j`Kaleb S. KEITHLEY2017-03-291-5/+5
| | | | | | | | | | | | | | | Using a makebomb, on f23 at least, blows up when generating the xdr headers and stubs. (Works reliably on f25 though, go figure.) This change appears to mitigate the race on f23. BUG: 1429696 Change-Id: Icca2de035255a7759563bf06d853950dddc5724d Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16954 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: errors generating xdr stubs+headers with `make -j`Kaleb S. KEITHLEY2017-03-271-3/+3
| | | | | | | | | | | | | | | | Using a makebomb, on f23 at least, blows up when generating the xdr headers and stubs. (Works reliably on f25 though, go figure.) This change appears to mitigate the race on f23. Change-Id: I006066f0e7c3f8b65189f97c70089f3422e3e08b BUG: 1429696 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16941 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Anoop C S <anoopcs@redhat.com>
* build: libgfxdr.so calls GF_FREE(), needs to link with -lglusterfsKaleb S. KEITHLEY2017-03-212-47/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous change to remove the xdrgen script exposed (or created) a recursive build dependency: libglusterfs needs the generated headers, and libgfxdr should be linked with libglusterfs for GF_FREE/__gf_free. (Much grumbling about libglusterfs being the kitchen sink of gluster elided. This would not be necessary if there were two or more libs, a gluster "runtime" library with common gluster code shared by the xlators and daemons, and a utility library with things like the rbtree, memory allocation, and whatnot.) So. Link at build time or link at runtime? For truth-and-beauty, link with libglusterfs.so at build time. Without truth-and-beauty, don't link with libglusterfs and rely on the other things that link with libglusterfs to provide resolution of __gf_free(). Truth-and-beauty it is. But how to generate the headers first, then build libglusterfs, then come back and build libgfxdr? Autotools is a maze of twisty passages, all different. Things that work with gnu make on linux don't work with the BSD make. Finally I hit on this solution. Add a shadow directory where make only generates the headers, then build libglusterfs using the generated headers, and finally build libgfxdr and link with libglusterfs. See original BZ 1330604 change http://review.gluster.org/14085 Change-Id: Iede8a30e3103176cb8f0b054885f30fcb352492b BUG: 1429696 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16873 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Tier: remove warning related to the enumhari gowtham2017-02-071-1/+2
| | | | | | | | | | | | | | | | | | | PROBLEM: In the tier as a service patch the enums for tier (from gf1_op_command and gf_defrag_command) are put into a single enum gf_defrag_command which causes a warning that will make the build fail. FIX: send both the enum and eliminate the warning. Change-Id: I899ff622dfb07134e6459aa65f65ea7252765293 BUG: 1418973 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/16539 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: add a cli command to trigger a statedump on a clientPoornima G2017-01-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this, we will be able to trigger statedumps on remote Gluster clients, mainly targetted for applications using libgfapi. Design: SIGUSR signal is the most comman way of taking a statedump in Gluster. But it cannot be used for libgfapi based processes, as the process loading the library might have already consumed SIGUSR signal. Hence going by the command way. One has to issue a Gluster command to initiate a statedump on the libgfapi based client. The command takes hostname and PID as an argument. All the glusterds in the cluster, check if they are connected to the specified hostname, and send an RPC request to all the connected clients from that hostname (via the mgmt connection). URL: http://review.gluster.org/16357 Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91 BUG: 1169302 Signed-off-by: Poornima G <pgurusid@redhat.com> [ndevos: minor fixes and split patch in smaller pieces] Reviewed-on: https://review.gluster.org/9228 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* tier : Tier as a servicehari gowtham2017-01-161-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterfs : Removing logically dead codeMuthu-vigneshwaran2017-01-071-6/+0
| | | | | | | | | | | | | | | CID = 1356502 BUG: 789278 Change-Id: I11a814addc6607902c12aca8f4efec5741cbd7d3 Signed-off-by: Muthu-vigneshwaran <mvignesh@redhat.com> Reviewed-on: http://review.gluster.org/16028 Tested-by: Muthu Vigneshwaran <muthuvigneshwaran77@gmail.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* dht/md-cache: Filter invalidate if the file is made a linkto filePoornima G2016-12-021-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | Upcall as a part of setattr, sends an invalidation and the invalidation carries the resulting stat value. When a file is converted to linkto files, even then an invalidation is set and as a result the mountpoint shows the sticky bit in the stat of the file. eg: ---------T. 945 root root 0 Nov 8 10:14 hardlink.999 Fix: When dht recieves a notification of sticky bit change, it updates the flag, to indicate md-cache to send the subsequent lookup. Change-Id: Ic2fd7a5b196db0754f9b97072e644e6bf69da606 BUG: 1392713 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15789 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Susant Palai <spalai@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* afr,dht,ec: Replace GF_EVENT_CHILD_MODIFIED with event SOME_DESCENDENT_DOWN/UPPoornima G2016-11-211-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently these are few events related to child_up/down: GF_EVENT_CHILD_UP : Issued when any of the protocol client connects. GF_EVENT_CHILD_MODIFIED : Issued by afr/dht/ec GF_EVENT_CHILD_DOWN : Issued when any of the protocol client disconnects. These events get modified at the dht/afr/ec layers. Here is a brief on the same. DHT: - All the subvolumes reported once, and atleast one child came up, then GF_EVENT_CHILD_UP is issued - connect GF_EVENT_CHILD_UP is issued - disconnect GF_EVENT_CHILD_MODIFIED is issued - All the subvolumes disconnected, GF_EVENT_CHILD_DOWN is issued AFR: - First subvolume came up, then GF_EVENT_CHILD_UP is issued - Subsequent subvolumes coming up, results in GF_EVENT_CHILD_MODIFIED - Any of the subvolumes go down, then GF_EVENT_SOME_CHILD_DOWN is issued - Last up subvolume goes down, then GF_EVENT_CHILD_DOWN is issued Until the patch [1] introduced GF_EVENT_SOME_CHILD_UP, GF_EVENT_CHILD_MODIFIED was issued by afr/dht when any of the subvolumes go up or down. Now with md-cache changes, there is a necessity to differentiate between child up and down. Hence, introducing GF_EVENT_SOME_DESCENDENT_DOWN/UP and getting rid of GF_EVENT_CHILD_MODIFIED. [1] http://review.gluster.org/12573 Change-Id: I704140b6598f7ec705493251d2dbc4191c965a58 BUG: 1396038 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15764 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd/quota: upgrade quota.conf file during an upgradeManikandan Selvaganesh2016-11-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem ======= When quota is enabled on 3.6, it will have quota conf version in quota.conf as v1.1. This node gets upgraded to 3.7 but it will still have quota conf version as v1.1 until a quota enable/disable/set limit is initiated. When this is not initiated and when this node tries to peer probe a node which is a fresh install of 3.7 (which will have quota conf version as v1.2), then this will result in "Peer rejected" state. This patch fixes the issue. Solution ======== When an upgrade happens from 3.6 to 3.7, quota.conf file needs to be modified as well. With 3.6, in quota.conf the version will be v1.1 and it needs to be changed to v1.2 from 3.7. This is because in 3.7, inode quota feature is introduced. So when an op-version bumpup happens quota.conf needs to be upgraded with quota conf version v1.2 and all the 16 byte uuid needs to be changed to 17 bytes uuid as well. Previously, when the cluster version is upgraded to 3.7, the quota.conf got upgraded as well. But, the upgradation was done only when quota enable/disable/set limit is done. With this patch, the upgradation is done during a cluster op version bump up as well. Change-Id: Idb5ba29d3e1ea0e45c85d87c952c75da9e0f99f0 BUG: 1371539 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/15352 Tested-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* build: rpc/xdr .c and .h files are regenerated unnecessarilyKaleb S. KEITHLEY2016-09-201-4/+8
| | | | | | | | | | | | | | | | | | | .c and .h files are blindly (re)generated. If you run `make` followed by a second `make` or `make install` the subsequent `make` will unnecessarily recompile everything because of the redundant regeneration of the .c and .h files are now newer than the prior builds .o files Change-Id: I7e477bcdcc20869e144ada7e6d91e7221b8ee71f BUG: 1377341 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15530 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anoop C S <anoopcs@redhat.com>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-1813-70/+193
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* io-stats: Add stats for upcall notificationsv3.10devPoornima G2016-08-311-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch, there will be additional entries seen in the profile info: UPCALL : Total number of upcall events that were sent from the brick(in brick profile), and number of upcall notifications recieved by client(in client profile) Cache invalidation events: ------------------------- CI_IATT : Number of upcalls that were cache invalidation and had one of the IATT_UPDATE_FLAGS set. This indicates that one of the iatt value was changed. CI_XATTR : Number of upcalls that were cache invalidation, and had one of the UP_XATTR or UP_XATTR_RM set. This indicates that an xattr was updated or deleted. CI_RENAME : Number of upcalls that were cache invalidation, resulted by the renaming of a file or directory CI_UNLINK : Number of upcalls that were cache invalidation, resulted by the unlink of a file. CI_FORGET : Number of upcalls that were cache invalidation, resulted by the forget of inode on the server side. Lease events: ------------ LEASE_RECALL : Number of lease recalls sent by the brick (in brick profile), and number of lease recalls recieved by client(in client profile) Note that the sum of CI_IATT, CI_XATTR, CI_RENAME, CI_UNLINK, CI_FORGET, LEASE_RECALL may not be equal to UPCALL. This is because, each cache invalidation can carry multiple flags. Eg: - Every CI_XATTR will have CI_IATT - Every CI_UNLINK will also increment CI_IATT as link count is an iatt attribute. Also UP_PARENT_DENTRY_FLAGS is currently not accounted for, as CI_RENAME and CI_UNLINK will always have the flag UP_PARENT_DENTRY_FLAGS Change-Id: Ieb8cd21dde2c4c7618f12d025a5e5156f9cc0fe9 BUG: 1371543 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15193 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* rpc: dead code fixankit2016-08-291-2/+2
| | | | | | | | | | | | | | CID: 1357866 Change-Id: I117cfd455b05df8d2bd9c8df4a081ffe4d053d09 BUG: 789278 Signed-off-by: ankit <anraj@redhat.com> Reviewed-on: http://review.gluster.org/15310 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: ankitraj NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cli,rpc : Removing logically dead codeMuthu-vigneshwaran2016-08-291-2/+0
| | | | | | | | | | | | | | | CID = 1357865, 1357866 Change-Id: I05eb345e9357d889872d259a600759392b188bb3 BUG: 789278 Signed-off-by: Muthu-vigneshwaran <mvignesh@redhat.com> Reviewed-on: http://review.gluster.org/15148 Tested-by: Muthu Vigneshwaran Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-19 16:47:12 +0000