summaryrefslogtreecommitdiffstats
path: root/rpc
Commit message (Collapse)AuthorAgeFilesLines
* mgmt/glusterd: make sure quota enforcer has established connection with ↵Raghavendra G2014-01-251-0/+28
| | | | | | | | | | | | | | | | | quotad before marking quota as enabled. without this patch there is a window of time when quota is marked as enabled in quota-enforcer, but connection to quotad wouldn't have been established. Any checklimit done during this period can result in a failed fop because of unavailability of quotad. Change-Id: I0d509fabc434dd55ce9ec59157123524197fcc80 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6572 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: Add options to the CLI that let the user control the reset ofDawit Alemu2014-01-243-3/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stats "volume profile info" automatically clears incremental stats. There isn't a command to: - fetch stats without clearing incremental stats and - clear cumulative and incremental stats This change introduces two arguments (i.e. peek and clear). 'clear' will wipe both incremental and cumulative stats. 'peek' fetches stats without wiping incremental stats. 'volume profile info peek' - fetches incremental and cumulative stats without wiping incremental stats 'volume profile info incremental peek' - fetches incremental stats without wiping incremental stats 'volume profile info clear' - clears both incremental and cumultiave stats Change-Id: I91834515ad672eca5f882809941147d7d997c4c9 BUG: 1047416 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6620 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc: use GF_FREE when a string is gf_strdup'd.Krishnan Parthasarathi2014-01-221-1/+1
| | | | | | | | Change-Id: I522c30a600e712be9cc09393104e228e4d8e13f5 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6752 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: Start using library versioning for various librariesHarshavardhana2014-01-182-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to libtool three individual numbers stand for CURRENT:REVISION:AGE, or C:R:A for short. The libtool script typically tacks these three numbers onto the end of the name of the .so file it creates. The formula for calculating the file numbers on Linux and Solaris is /path/to/library/<library_name>.(C - A).(A).(R) As you release new versions of your library, you will update the library's C:R:A. Although the rules for changing these version numbers can quickly become confusing, a few simple tips should help keep you on track. The libtool documentation goes into greater depth. In essence, every time you make a change to the library and release it, the C:R:A should change. A new library should start with 0:0:0. Each time you change the public interface (i.e., your installed header files), you should increment the CURRENT number. This is called your interface number. The main use of this interface number is to tag successive revisions of your API. The AGE number is how many consecutive versions of the API the current implementation supports. Thus if the CURRENT library API is the sixth published version of the interface and it is also binary compatible with the fourth and fifth versions (i.e., the last two), the C:R:A might be 6:0:2. When you break binary compatibility, you need to set AGE to 0 and of course increment CURRENT. The REVISION marks a change in the source code of the library that doesn't affect the interface-for example, a minor bug fix. Anytime you increment CURRENT, you should set REVISION back to 0. Change-Id: Id72e74c1642c804fea6f93ec109135c7c16f1810 BUG: 862082 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5645 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Set default outstanding RPC limit to 16Santosh Kumar Pradhan2014-01-152-23/+28
| | | | | | | | | | | | | With 64, NFS server hangs with large I/O load (~ 64 threads writing to NFS server). The test results from Ben England (Performance expert) suggest to set it as 16 instead of 64. Change-Id: I418ff5ba0a3e9fdb14f395b8736438ee1bbd95f4 BUG: 1008301 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6696 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: ben england <bengland@redhat.com>
* socket: propogate connect failure in socket_event_handlerKrishnan Parthasarathi2014-01-141-1/+1
| | | | | | | | | | | | | | | | | This patch prevents spurious handling of pollin/pollout events on an 'un-connected' socket, when outgoing packets to its remote endpoint are 'dropped' using iptables(8) rules. For eg, iptables -I OUTPUT -p tcp --dport 24007 -j DROP Change-Id: I1d3f3259dc536adca32330bfb7566e0b9a521e3c BUG: 1048188 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6627 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* rpc/auth: Avoid NULL dereference in rpcsvc_auth_request_init()Harshavardhana2014-01-086-46/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Code section is bogus! ------------------------------------------ 370: if (!auth->authops->request_init) 371: ret = auth->authops->request_init (req, auth->authprivate); ------------------------------------------ Seems to have been never been used historically since logically above code has never been true to actually execute "authops->request_init() --> auth_glusterfs_{v2,}_request_init()" On top of that under "rpcsvc_request_init()" verf.flavour and verf.datalen are initialized from what is provided through 'callmsg'. ------------------------------------------ req->verf.flavour = rpc_call_verf_flavour (callmsg); req->verf.datalen = rpc_call_verf_len (callmsg); /* AUTH */ rpcsvc_auth_request_init (req); return req; ------------------------------------------ So the code in 'auth_glusterfs_{v2,}_request_init()' performing this operation will over-write the original flavour and datalen. ------------------------------------------ if (!req) return -1; memset (req->verf.authdata, 0, GF_MAX_AUTH_BYTES); req->verf.datalen = 0; req->verf.flavour = AUTH_NULL; ------------------------------------------ Refactoring the whole code into a more understandable version and also avoiding a potential NULL dereference Change-Id: I1a430fcb4d26de8de219bd0cb3c46c141649d47d BUG: 1049735 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6591 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Small memory leak in rpcsvc_drc_init()Santosh Kumar Pradhan2014-01-031-25/+17
| | | | | | | | | | | | | | | | | | | | | | 1. The routine rpcsvc_drc_init() is only used while initialization of NFS xlator. It should just check for nfs.drc option and init DRC feature accordingly. If it's set to OFF, then rpcsvc_drc_init() allocates memory for svc.drc and set ret value to 0 and goes to out: block where drc is leaked. 2. rpcsvc_drc_init() should just allocate svc.drc and init it. Here svc.drc can never be valid. 3. If svc.drc gets init'd here, no point of checking for drc type here. Change-Id: I4085771cdb8c9c15d1b9c548b77929a37f27c124 BUG: 1047902 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6628 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Possible SEGV crash in NFS while DRC is OFFSantosh Kumar Pradhan2014-01-031-1/+1
| | | | | | | | | | | | | | | | In rpcsvc_submit_generic(), FILE: rpc/rpc-lib/src/rpcsvc.c, while caching the reply (DRC), the code does not check if DRC is ON and goes ahead assuming DRC is on and try to take a LOCK on drc. FIX: Put a check on svc->drc by rpcsvc_need_drc(). Change-Id: I52c57280487e6061c68fd0b784e1cafceb2f3690 BUG: 1048072 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6632 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc/server: add anonuid and anongid options for root-squashNiels de Vos2013-12-303-4/+21
| | | | | | | | | | | | | | | | | | | Introduce new options to modify the behaviour of server.root-squash. With server.anonuid and server.anongid the uid/gid can be specified and the root user (uid=0 and gid=0) will be mapped to the given uid/gid instead of nfsnobody (uid=65534 and gid=65534). Many thanks to Vikhyat Umrao for writing the majority of the test-case! Change-Id: I6379a3d2ef52b9b9707f2f6f0529657580c8d779 BUG: 1043886 CC: Vikhyat Umrao <vumrao@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6546 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Reviewed-by: Vikhyat Umrao <vumrao@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: unix socket connect path can't be greater than UNIX_PATH_MAX charactersKrishnan Parthasarathi2013-12-261-2/+2
| | | | | | | | | | Change-Id: I74788b63dd1c14507aa6d65182ea4b87a2e1f389 BUG: 1046308 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6589 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc,glusterd: Use rpc_clnt notifyfn to cleanup mydataKaushal M2013-12-162-2/+10
| | | | | | | | | | | | | | | | | | | | | | | rpc: - On a RPC_TRANSPORT_CLEANUP event, rpc_clnt_notify calls the registered notifyfn with a RPC_CLNT_DESTROY event. The notifyfn should properly cleanup the saved mydata on this event. - Break the reconnect chain when an rpc client is disabled. This will prevent new disconnect events which can lead to crashes. glusterd: - Added support for RPC_CLNT_DESTROY in glusterd_brick_rpc_notify - Use a common glusterd_rpc_clnt_unref() function throught glusterd in place of rpc_clnt_unref(). This function correctly gives up the big-lock before performing the unref. Change-Id: I93230441c5089039643fc9f5632477ef1b695348 BUG: 962619 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5512 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/geo-rep: more glusterd and cli fixes for geo-rep.Ajeet Jha2013-12-121-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | -> handle option validation cases in reset case. -> Creating valid conf path when glusterd restarts. -> Reading the gsyncd worker thread status and displaying it. -> Displaying status-detail per worker. -> Fetch checkpoint info in geo-rep status. -> use-tarssh value validation added. misc: misc geo-rep fixes based on cluster, logrotate etc.. -> cluster/dht: fix 'stime' getxattr getting overwritten. -> cluster/afr: return max of 'stime' values in subvol. -> geo-rep-logrotate: Sending SIGHUP to geo-rep auxiliary. -> cluster/dht: fix convoluted logic while aggregating. -> cluster/*: fix 'stime' min/max fetch logic. Change-Id: I811acea0bbd6194797a3e55d89295d1ea021ac85 BUG: 1036552 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/6405 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Add an option to fetch just incremental or cumulative I/0Dawit Alemu2013-12-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | information 'volume profile info' fetches both cumulative and incremental I/O statistics. There isn't a way to fetch just cumulative or incremental statistics. This change introduces two optional arguments, namely "incremental" and "cumulative", that can be tacked on to 'volume profile info'. In other words, the new command format is volume profile <VOLNAME> {start | info [incremental | cumulative] | stop} [nfs] 'volume profile info incremental' - fetches incremental stats 'volume profile info cumulative' - fetches cumulative stats 'volume profile info' - fetches incremental and cumulative stats Change-Id: I5ddb45d990542ea611d23d251efebfec46f472d0 BUG: 1030580 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6264 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli: More checks in rebalance status outputKaushal M2013-12-032-1/+3
| | | | | | | | | | Change-Id: Ibd2edc5608ae6d3370607bff1c626c8347c4deda BUG: 1031887 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6337 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* socket: limit vector count to IOV_MAXAnand Avati2013-11-261-2/+2
| | | | | | | | | | | | | IOV_MAX is the maximum supported vector count on a given platform. Limit the count to IOV_MAX if higher. As we are performing non-blocking IO getting a smaller return value is handled naturally. Change-Id: I94ef67a03ed0e10da67a776af2b55506bf721611 BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6354 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* cli/glusterd: Changes to quota command Quota featureRaghavendra G2013-11-262-13/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | re-work. Following are the cli commands that are new/re-worked: ====================================================== volume quota <VOLNAME> {enable|disable|list [<path> ...]|remove <path>| default-soft-limit <percent>} | volume quota <VOLNAME> {limit-usage <path> <size> [<percent>]} | volume quota <VOLNAME> {alert-time|soft-timeout|hard-timeout} {<time>} volume status [all | <VOLNAME> [nfs|shd|<BRICK>|quotad]] [detail|clients|mem|inode|fd|callpool] volume statedump <VOLNAME> [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history] glusterd changes: ================= * Quota limits are now set as extended attributes by glusterd from the aux mount created by the cli. * The gfids of the directories on which quota limits are set for a given volume are stored in /var/lib/glusterd/vols/<volname>/quota.conf file in binary format, and whose cksum and version is stored in /var/lib/glusterd/vols/<volname>/quota.cksum. Original-author: Krutika Dhananjay <kdhananj@redhat.com> Original-author: Krishnan Parthasarathi <kparthas@redhat.com> BUG: 969461 Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6003 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/quota: Improvements to quotaRaghavendra G2013-11-261-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Two stages of quota enforcement is done: Soft and hard quota Upon reaching soft quota limit on the directory it logs/alerts in the quota daemon log (ie DEFAULT_LOG_DIR/quotad.log) and no more writes allowed after hard quota limit. After reaching the soft-limit the daemon alerts the user/admin repeatively for every 'alert-time', which is configurable. * Quota enforcer is moved to server-side. It takes care of enforcing quota. Since enforcer doesn't have the cluster view, it relies on another service called quota-aggregator. Aggregator, on query can return the size of a directory based on the cluster view. Enforcer is always loaded in the server graph and is by passed if the feature is not enabled. Options specific to enforcer: server-quota - Specifies whether the feature is on/off. It is used to by pass the quota if turned off. deem-statfs - If set to on, it takes quota limits into consideration while estimating fs size. (df command). The algorithm followed is, i. Adjust statvfs based on limit configured on root. ii. If limit is set on the inode passed, use size/limits on that inode to populate statvfs. Otherwise, use size/limits configured on root. iii. Upon statvfs, update the ctx->size on the inode. iv. Don't let DHT aggregate, instead take the maximum of the usages from the subvols of the DHT, since each of it contains the complete information. Enforcer also makes use of gfid-to-path conversion functionality to work correctly when a client like nfs predominently relies on nameless lookups. * Quota Aggregator acts as a thin client to provide cluster view Its a lightweight *gluster client* process with no mount point, started upon enabling quota or restarting the volume. This is a single process run on each brick, which can answer queries on all volumes in the cluster. Its volfile stored in GLUSTERD_DEFAULT_WORKING_DIR/quotad/quotad.vol. Credits: Raghavendra Bhat <rabhat@redhat.com> Varun Shastry <vshastry@redhat.com> Shishir Gowda <sgowda@redhat.com> Kruthika Dhananjay <kdhananj@redhat.com> Brian Foster <bfoster@redhat.com> Krishnan Parthasarathi <kparthas@redhat.com> Change-Id: Id1cb25b414951da34c665a55f77385d482e0f9de BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/5952 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: More clean up for Gluster NFSSantosh Kumar Pradhan2013-11-252-39/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) Fix the typo in NFS default ACL The typo was introduced as part of the Fix to BZ 1009210 i.e. http://review.gluster.org/5980. The user ACL xattr structure was passed to default ACL xattr. 2) Clean up NFS code to avoid unnecessary SEGV in rpcsvc_drc_reconfigure() which was not validating the svc->drc. Add a routine rpcsvc_drc_deinit() to handle the clean up of DRC specific data structures. For init(), use rpcsvc_drc_init(). 3) nfs_init_state() was returning wrong value even if the registration with portmapper failed, causing the NFS server process to hang around. As a result it used to get SEGV during rpcsvc_drc_reconfigure(). 4) Clean up memfactor usage across nfs.c nfs3.c. Change-Id: I5cea26cb68dd8a822ec0ae104952f67fe63fa703 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6329 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: RFE for NFS connection behaviorSantosh Kumar Pradhan2013-11-147-39/+269
| | | | | | | | | | | | | | | Implement reconfigure() for NFS xlator so that volume set/reset wont restart the NFS server process. But few options can not be reconfigured dynamically e.g. nfs.mem-factor, nfs.port etc which needs NFS to be restarted. Change-Id: Ic586fd55b7933c0a3175708d8c41ed0475d74a1c BUG: 1027409 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6236 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* bd_map: Remove bd_map xlatorM. Mohan Kumar2013-11-131-10/+0
| | | | | | | | | | | Remove bd_map xlator and CLI related changes. Change-Id: If7086205df1907127c1a1fa4ba603f1c48421d09 BUG: 1028672 Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5747 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: zerofill supportM. Mohan Kumar2013-11-104-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in the specified range. This fop will be useful when a whole file needs to be initialized with zero (could be useful for zero filled VM disk image provisioning or during scrubbing of VM disk images). Client/application can issue this FOP for zeroing out. Gluster server will zero out required range of bytes ie server offloaded zeroing. In the absence of this fop, client/application has to repetitively issue write (zero) fop to the server, which is very inefficient method because of the overheads involved in RPC calls and acknowledgements. WRITESAME is a SCSI T10 command that takes a block of data as input and writes the same data to other blocks and this write is handled completely within the storage and hence is known as offload . Linux ,now has support for SCSI WRITESAME command which is exposed to the user in the form of BLKZEROOUT ioctl. BD Xlator can exploit BLKZEROOUT ioctl to implement this fop. Thus zeroing out operations can be completely offloaded to the storage device , making it highly efficient. The fop takes two arguments offset and size. It zeroes out 'size' number of bytes in an opened file starting from 'offset' position. This patch adds zerofill support to the following areas: - libglusterfs - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi Client applications can exloit this fop by using glfs_zerofill introduced in libgfapi.FUSE support to this fop has not been added as there is no system call for this fop. Changes from previous version 3: * Removed redundant memory failure log messages Changes from previous version 2: * Rebased and fixed build error Changes from previous version 1: * Rebased for latest master TODO : * Add zerofill support to trace xlator * Expose zerofill capability as part of gluster volume info Here is a performance comparison of server offloaded zeofill vs zeroing out using repeated writes. [root@llmvm02 remote]# time ./offloaded aakash-test log 20 real 3m34.155s user 0m0.018s sys 0m0.040s [root@llmvm02 remote]# time ./manually aakash-test log 20 real 4m23.043s user 0m2.197s sys 0m14.457s [root@llmvm02 remote]# time ./offloaded aakash-test log 25; real 4m28.363s user 0m0.021s sys 0m0.025s [root@llmvm02 remote]# time ./manually aakash-test log 25 real 5m34.278s user 0m2.957s sys 0m18.808s The argument log is a file which we want to set for logging purpose and the third argument is size in GB . As we can see there is a performance improvement of around 20% with this fop. Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18 BUG: 1028673 Signed-off-by: Aakash Lal Das <aakash@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5327 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpcsvc: implement per-client RPC throttlingAnand Avati2013-10-286-0/+107
| | | | | | | | | | | | | | | | Implement a limit on the total number of outstanding RPC requests from a given cient. Once the limit is reached the client socket is removed from POLL-IN event polling. Change-Id: I8071b8c89b78d02e830e6af5a540308199d6bdcd BUG: 1008301 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6114 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: add remote peer's hostname to call_bail log msgsKrishnan Parthasarathi2013-10-171-3/+4
| | | | | | | | | | Change-Id: I982cf7619463983c04b401d70a76635991d072d2 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6091 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* libglusterfs: Add monotonic clocking counter for timer threadHarshavardhana2013-10-151-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: [Feature] Command implementation to get heal-countVenkatesh Somyajulu2013-10-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently to know the number of files to be healed, either user has to go to backend and check the number of entries present in indices/xattrop directory. But if a volume consists of large number of bricks, going to each backend and counting the number of entries is a time-taking task. Otherwise user can give gluster volume heal vol-name info command but with this approach if no. of entries are very hugh in the indices/ xattrop directory, it will comsume time. So as a feature, new command is implemented. Command 1: gluster volume heal vn statistics heal-count This command will get the number of entries present in every brick of a volume. The output displays only entries count. Command 2: gluster volume heal vn statistics heal-count replica 192.168.122.1:/home/user/brickname Here if we are concerned with just one replica. So providing any one of the brick of a replica will get the number of entries to be healed for that replica only. Example: Replicate volume with replica count 2. Backend status: -------------- [root@dhcp-0-17 xattrop]# ls -lia | wc -l 1918 NOTE: Out of 1918, 2 entries are <xattrop-gfid> dummy entries so actual no. of entries to be healed are 1916. [root@dhcp-0-17 xattrop]# pwd /home/user/2ty/.glusterfs/indices/xattrop Command output: -------------- Gathering count of entries to be healed on volume volume3 has been successful Brick 192.168.122.1:/home/user/22iu Status: Brick is Not connected Entries count is not available Brick 192.168.122.1:/home/user/2ty Number of entries: 1916 Change-Id: I72452f3de50502dc898076ec74d434d9e77fd290 BUG: 1015990 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr : Implementation of command "gluster volume heal vn statistics"Venkatesh Somyajulu2013-10-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "gluster volume heal volumename statistics" command gives the summary of the afr crawl done based on the entries present in the xattrop directory. Whenever afr crawls are attempted, the beginning time of crawl, end time of crawl, no of files healed, heal-failed count and number of files in split brain are shown along with the type of the crawl. If crawl is already in progress then it will give the number of files healed, heal failed count and number of files in split-brain from the beginning of the crawl and instead of telling the end time of the crawl, "CRAWL IN PROGRESS" message will be shown. Output format: command: "gluster volume heal volume-name statistics" Output: Gathering afr crawl statistics crawl statistics on volume volume-name has been successful ------------------------------------------------ Crawl statistics for brick no 0 Hostname of brick 192.168.122.248 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 ------------------------------------------------ Crawl statistics for brick no 1 Hostname of brick 192.168.122.1 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 -------------------------------------------------- Change-Id: I10bf9d10b005741db9973fb1352e0dd59ed99aa9 BUG: 949400 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4790 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* transport/socket: don't try to set TCP_DELAY on unix domain socketsRaghavendra G2013-10-121-3/+3
| | | | | | | | | Change-Id: I290cd983bd0dff2e32e5ee90a12e888a3b31c6fd BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/5954 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Implement 'volume status tasks'Krutika Dhananjay2013-10-082-0/+2
| | | | | | | | | | | | | | | | | | | oVirt's Gluster Integration needs an inexpensive command that can be executed every 10 seconds to monitor async tasks and their parameters, for all volumes. The solution involves adding a 'tasks' sub-command to 'volume status' to fetch only the async task IDs, type and other relevant parameters. Only the originator glusterd participates in this command as all the information needed is available on all the nodes. This is to make the command suitable for being executed every 10 seconds. Change-Id: I1edc607baf29b001a5585079dec681d7c641b3d1 BUG: 1012346 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6006 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* gNFS: Incorrect NFS ACL encoding for XFSSantosh Kumar Pradhan2013-09-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Incorrect NFS ACL encoding causes "system.posix_acl_default" setxattr failure on bricks on XFS file system. XFS (potentially others?) doesn't understand when the 0x10 prefix is added to the ACL type field for default ACLs (which the Linux NFS client adds) which causes setfacl()->setxattr() to fail silently. NFS client adds NFS_ACL_DEFAULT(0x1000) for default ACL. FIX: Mask the prefix (added by NFS client) OFF, so the setfacl is not rejected when it hits the FS. Original patch by: "Richard Wareing" Change-Id: I17ad27d84f030cdea8396eb667ee031f0d41b396 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/5980 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: block unused signals in created threadsAnand Avati2013-09-252-16/+13
| | | | | | | | | | | | | | | Block all signal except those which are set for explicit handling in glusterfs_signals_setup(). Since thread spawning code in libglusterfs and xlators can get called from application threads when used through libgfapi, it is necessary to do this blocking. Change-Id: Ia320f80521a83d2edcda50b9ad414583a0175281 BUG: 1011662 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5995 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: improve rebalance fix-layout status reportingRavishankar N2013-09-192-1/+9
| | | | | | | | | | | | | | | | | | | Problem: Currenly the CLI rebalance status command output does not indicate the 'type' of rebalance, i.e. whether a full rebalance or only a fix-layout was carried out. Fix: After the rebalance status of all peers is received by the originator glusterd, alter it to reflect the type of rebalance before passing it on to the CLI process. Change-Id: I1940ffda0d36e25e5b33c84a0ea210394cc9e1d3 BUG: 1004744 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/5826 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpcsvc: allocate large auxgid list on demandAnand Avati2013-09-175-1/+41
| | | | | | | | | | | | | | | For rpc requests having large aux group list, allocate large list on demand. Else use small static array by default. Without this patch, glusterfsd allocates 140+MB of resident memory just to get started and initialized. Change-Id: I3a07212b0076079cff67cdde18926e8f3b196258 Signed-off-by: Anand Avati <avati@redhat.com> BUG: 953694 Reviewed-on: http://review.gluster.org/5927 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterfsd: Round robin DNS should not be relied upon withHarshavardhana2013-09-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | config service availability for clients. Backupvolfile server as it stands is slow and prone to errors with mount script and its combination with RRDNS. Instead in theory it should use all the available nodes in 'trusted pool' by default (Right now we don't have a mechanism in place for this) Nevertheless this patch provides a scenario where a list of volfile-server can be provided on command as shown below ----------------------------------------------------------------- $ glusterfs -s server1 .. -s serverN --volfile-id=<volname> \ <mount_point> ----------------------------------------------------------------- OR ----------------------------------------------------------------- $ mount -t glusterfs -obackup-volfile-servers=<server2>: \ <server3>:...:<serverN> <server1>:/<volname> <mount_point> ----------------------------------------------------------------- Here ':' is used as a separator for mount script parsing Now these will be remembered and recursively attempted for fetching vol-file until exhausted. This would ensure that the clients get 'volume' configs in a consistent manner avoiding the need to poll through RRDNS. Change-Id: If808bb8a52e6034c61574cdae3ac4e7e83513a40 BUG: 986429 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5400 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd/cli: Geo-Replication "status detail" cmdVenky Shankar2013-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | Provides detailed status info in the following format MASTER <master-vol> SLAVE <slave-vol> NODE HEALTH UPTIME FILES SYNCD FILES PENDING BYTES PENDING DELETES PENDING ----------------------------------------------------------------------------------- This patch introdues "status detail" command to show crawl related information in CLI. These values are "pulled" from gsyncd when "status detail" is executed. Change-Id: I1fdaf7180eacce054a864d34971dc160bd7301e1 BUG: 990420 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/5590 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: fix typo which refers glibc macroAnand Avati2013-08-231-1/+1
| | | | | | | | | | | | | | A typo which read MAX_AUTH_BYTES instead of GF_MAX_AUTH_BYTES was picking the value 400 instead of the larger 2048. This causes failures when number of aux group ids is a large number. Change-Id: Idb8d59aee2690fd53e24c2e09f58a16fe387ef27 BUG: 1000131 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5695 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs/client_t client_t implementation, phase 1Kaleb S. KEITHLEY2013-07-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Implementation of client_t The feature page for client_t is at http://www.gluster.org/community/documentation/index.php/Planning34/client_t In addition to adding libglusterfs/client_t.[ch] it also extracts/moves the locktable functionality from xlators/protocol/server to libglusterfs, where it is used; thus it may now be shared by other xlators too. This patch is large as it is. Hooking up the state dump is left to do in phase 2 of this patch set. (N.B. this change/patch-set supercedes previous change 3689, which was corrupted during a rebase. That change will be abandoned.) BUG: 849630 Change-Id: I1433743190630a6d8119a72b81439c0c4c990340 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/3957 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterd/cli changes for distributed geo-repAvra Sengupta2013-07-263-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commands: gluster system:: execute gsec_create gluster volume geo-rep <master> <slave-url> create [push-pem] [force] gluster volume geo-rep <master> <slave-url> start [force] gluster volume geo-rep <master> <slave-url> stop [force] gluster volume geo-rep <master> <slave-url> delete gluster volume geo-rep <master> <slave-url> config gluster volume geo-rep <master> <slave-url> status The geo-replication is distributed. The session will be created, and gsyncd will be spawned on all relevant nodes, instead of only one node. geo-rep: Collecting status detail related data Added persistent store for saving information about TotalFilesSynced, TotalSyncTime, TotalBytesSynced Changes in the status information in socket: Existing(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01; New(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01;SyncTime=0.69978; TotalSyncTime=2.890044;TotalFilesSynced=6;TotalBytesSynced=143640; Persistent details stored in /var/lib/glusterd/geo-replication/${mastervol}/${eSlave}-detail.status Change-Id: I1db7fc13ffca2e415c05200b0109b1254067f111 BUG: 847839 Original Author: Avra Sengupta <asengupt@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Csaba Henk <csaba@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5132 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* nfs/auth: reject mounts if getaddrinfo failsRajesh Amaravathi2013-06-261-3/+48
| | | | | | | | | | | | | When nfs.addr-namelookup is turned on, if the getaddrinfo call fails while authenticating client's ip/hostname, the mount request is denied Change-Id: I744f1c6b9c7aae91b9363bba6c6987b42f7f0cc9 BUG: 947055 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/5143 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: duplicate request cache for nfsRajesh Amaravathi2013-06-218-25/+1055
| | | | | | | | | | | | | | | Duplicate request cache provides a mechanism for detecting duplicate rpc requests from clients. DRC caches replies and on duplicate requests, sends the cached reply instead of re-processing the request. Change-Id: I3d62a6c4aa86c92bf61f1038ca62a1a46bf1c303 BUG: 847624 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4049 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Log peer op status at the appropriate timeKrutika Dhananjay2013-06-183-171/+0
| | | | | | | | | | Change-Id: Ia8e1af082078f2f791708ba4faa4992bf291dd6e BUG: 961339 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/5023 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/rpc: move latest added procedures to the end of the arrayNiels de Vos2013-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | While looking at the newly introduced procedures FALLOCATE and DISCARD, it seems that these were added with already existing procedure numbers. This makes the protocol incompatible with existing roll-outs. It is very confusing when new procedures are added somewhere in the middle of the array. This will cause the number of existing procedures to change. It is much preferred to add new procedures at the end of the array. This changes not only corrects the enum that generates the procedure numbers, but also the ordering in the client and server fops-array for clarity. Correcting this greatly simplifies adding support for these new procedures in Wireshark and will prevent confusion to the people reading network traces (with or without Wireshark). Change-Id: Ib9e7978531d016c7230d756b855cb94cb0793b0f BUG: 974976 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5215 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: Cleanup rpc object in TRANSPORT_CLEANUP eventKrishnan Parthasarathi2013-06-154-26/+43
| | | | | | | | | | | | | | | | | | | | | | | rpc_transport object should be alive as long as the rpc_clnt object is alive. To ensure this, on rpc_clnt's last unref, we cleanup the corresponding rpc_transport object and complete the rpc_clnt cleanup later, in a bottom-up fashion. Introduced rpc_clnt_is_disabled, to allow higher layers to differentiate between the 'final'[1] disconnect triggered from upper layers, and a normal disconnect. This differentiation helps in cleaning up resources, at higher layers, in a race-free manner. [1] - 'final' here means that the rpc and the associated connection, is not going to be used anymore. eg - glusterd_brick_disconnect on volume-stop. Change-Id: I2ecf891a36e3b02cd9eacca964e659525d1bbc6e BUG: 962619 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5107 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: discard (hole punch) supportBrian Foster2013-06-134-0/+83
| | | | | | | | | | | | | | | | Add support for the DISCARD file operation. Discard punches a hole in a file in the provided range. Block de-allocation is implemented via fallocate() (as requested via fuse and passed on to the brick fs) but a separate fop is created within gluster to emphasize the fact that discard changes file data (the discarded region is replaced with zeroes) and must invalidate caches where appropriate. BUG: 963678 Change-Id: I34633a0bfff2187afeab4292a15f3cc9adf261af Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/5090 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gluster: add fallocate fop supportBrian Foster2013-06-134-0/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement support for the fallocate file operation. fallocate allocates blocks for a particular inode such that future writes to the associated region of the file are guaranteed not to fail with ENOSPC. This patch adds fallocate support to the following areas: - libglusterfs - mount/fuse - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi BUG: 949242 Change-Id: Ice8e61351f9d6115c5df68768bc844abbf0ce8bd Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/4969 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* mgmt/glusterd, socket: Change logging for brick disconnectsPranith Kumar K2013-06-111-1/+6
| | | | | | | | | | | | | | | | | | For unix path based sockets, the socket path is cryptic (md5sum of path) and may not be useful for the user in debugging so log it in DEBUG. Changed logging in brick_rpc_notify to log brickinfo for disconnects. Change-Id: I69174bbbbde8352d38837723e950ad8fc15232aa BUG: 963153 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5009 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Add a cmd for getting uuid of local nodeKrishnan Parthasarathi2013-06-101-0/+1
| | | | | | | | | | | | | | | | | | | Usage: gluster system:: uuid get This is needed since we generate uuid of a node in a lazy manner. ie, we generate a uuid for the node only on the first volume or peer operation, when the node needs an external identity. With this command, we can force[1] the uuid generation, without a volume or peer operation performed. [1]: Querying for uuid (or uuid get), forces uuid to come into existence. Change-Id: I62c8b6754117756aa4d773dd48af4ddeb1a1d878 BUG: 971661 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5175 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* transport/socket: fix connect/disconnect racesJeff Darcy2013-06-042-39/+69
| | | | | | | | | | | | | | | We might receive a connect request while a disconnect is still in progress, requiring more states and (the return of) poller generation numbers to avoid redundant pollers. We might also get either kind of request from within our own rpc_transport_notify upcall, so we have to avoid locking and use the PLEASE_DIE state instead. Change-Id: Icbaacf96c516b607a79ff62c90b74d42b241780f BUG: 970194 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/5137 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* socket: Prevent extra logging in socket_rwvPranith Kumar K2013-05-311-19/+19
| | | | | | | | | | | | | | | | | | | Problem: If the socket is not even connected socket_rwv fails and the error log comes every 3 seconds for every re-connect. Fix: Prevent this error log if the socket is not even connected. Change-Id: I963f1345c4b6779dd5491948f7f5c4357a507b67 BUG: 963088 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5008 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: convert socket functions to file scope (static)Anand Avati2013-05-291-46/+46
| | | | | | | | | | | | | | The function names used in socket.c conflict with Samba's socket functions (samba.git/source4/lib/socket/socket.h). Convert our functions to file scope as they are anyways not called across files. Change-Id: If98ae557d3e2868f257c021b283ede6a5e92de02 BUG: 953694 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5104 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-13 06:26:30 +0000