summaryrefslogtreecommitdiffstats
path: root/tests/basic
Commit message (Collapse)AuthorAgeFilesLines
* cluster/thin-arbiter: Consider thin-arbiter before marking new entry changelogAshish Pandey2019-02-181-6/+16
| | | | | | | | | | | | | | | | | | | If a fop to create an entry fails on one of the data brick, we mark the pending changelog on the entry on brick for which it was successful. This is done as part of post op phase to make sure that entry gets healed even if it gets renamed to some other path where its parent was not marked as bad. As it happens as part of post op, we should consider thin-arbiter to check if the brick, which was successful, is the good brick or not. This will avoide split brain and other issues. >Change-Id: I12686675be98f02f70a5186b3ed748c541514d53 >Signed-off-by: Ashish Pandey <aspandey@redhat.com> Change-Id: I12686675be98f02f70a5186b3ed748c541514d53 updates: bz#1672314 Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* afr: thin-arbiter 2 domain locking and in-memory stateRavishankar N2018-12-121-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2 domain locking + xattrop for write-txn failures: -------------------------------------------------- - A post-op wound on TA takes AFR_TA_DOM_NOTIFY range lock and AFR_TA_DOM_MODIFY full lock, does xattrop on TA and releases AFR_TA_DOM_MODIFY lock and stores in-memory which brick is bad. - All further write txn failures are handled based on this in-memory value without querying the TA. - When shd heals the files, it does so by requesting full lock on AFR_TA_DOM_NOTIFY domain. Client uses this as a cue (via upcall), releases AFR_TA_DOM_NOTIFY range lock and invalidates its in-memory notion of which brick is bad. The next write txn failure is wound on TA to again update the in-memory state. - Any incomplete write txns before the AFR_TA_DOM_NOTIFY upcall release request is got is completed before the lock is released. - Any write txns got after the release request are maintained in a ta_waitq. - After the release is complete, the ta_waitq elements are spliced to a separate queue which is then processed one by one. - For fops that come in parallel when the in-memory bad brick is still unknown, only one is wound to TA on wire. The other ones are maintained in a ta_onwireq which is then processed after we get the response from TA. Change-Id: I32c7b61a61776663601ab0040e2f0767eca1fd64 updates: bz#1648205 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* cluster/afr: Use 2 domain locking in SHD for thin-arbiterkarthik-us2018-11-291-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | With this change when SHD starts the index crawl it requests all the clients to release the AFR_TA_DOM_NOTIFY lock so that clients will know the in memory state is no more valid and any new operations needs to query the thin-arbiter if required. When SHD completes healing all the files without any failure, it will again take the AFR_TA_DOM_NOTIFY lock and gets the xattrs on TA to see whether there are any new failures happened by that time. If there are new failures marked on TA, SHD will start the crawl immediately to heal those failures as well. If there are no new failures, then SHD will take the AFR_TA_DOM_MODIFY lock and unsets the xattrs on TA, so that both the data bricks will be considered as good there after. >Change-Id: I037b89a0823648f314580ba0716d877bd5ddb1f1 >fixes: bz#1579788 >Signed-off-by: karthik-us <ksubrahm@redhat.com> (cherry picked from commit 5784a00f997212d34bd52b2303e20c097240d91c) Change-Id: I037b89a0823648f314580ba0716d877bd5ddb1f1 fixes: bz#1648205
* features/shard: Hold a ref on base inode when adding a shard to lru listKrutika Dhananjay2018-10-251-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of: > Change-Id: Ic15ca41444dd04684a9458bd4a526b1d3e160499 > Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> > (cherry picked from commit e627977) > BUG: 1605056 In __shard_update_shards_inode_list(), previously shard translator was not holding a ref on the base inode whenever a shard was added to the lru list. But if the base shard is forgotten and destroyed either by fuse due to memory pressure or due to the file being deleted at some point by a different client with this client still containing stale shards in its lru list, the client would crash at the time of locking lru_base_inode->lock owing to illegal memory access. So now the base shard is ref'd into the inode ctx of every shard that is added to lru list until it gets lru'd out. The patch also handles the case where none of the shards associated with a file that is about to be deleted are part of the LRU list and where an unlink at the beginning of the operation destroys the base inode (because there are no refkeepers) and hence all of the shards that are about to be deleted will be resolved without the existence of a base shard in-memory. This, if not handled properly, could lead to a crash. Change-Id: Ic15ca41444dd04684a9458bd4a526b1d3e160499 updates: bz#1641440 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
* gfapi: Bug fixes in leases processing code-pathSoumya Koduri2018-10-181-2/+2
| | | | | | | | | | | | | | | | | This patch fixes below issues in gfapi lease code-path * 'glfs_setfsleasid' should allow NULL input to be able to reset leaseid * Applications should be allowed to (un)register for upcall notifications of type GLFS_EVENT_LEASE_RECALL * APIs added to read contents of GLFS_EVENT_LEASE_RECALL argument which is of type "struct glfs_upcall_lease" This is backport of the below mainline patch - https://review.gluster.org/#/c/glusterfs/+/21391 Change-Id: I3320ddf235cc82fad561e13b9457ebd64db6c76b updates: #350 Signed-off-by: Soumya Koduri <skoduri@redhat.com>
* ctime: Provide noatime optionKotresh HR2018-10-021-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | Most of the applications are {c|m}time dependant and very few are atime dependant. So provide noatime option to not update atime when ctime feature is enabled. Also this option has to be enabled with ctime feature to avoid unnecessary self heal. Since AFR/EC reads data from single subvolume, atime is only updated in one subvolume triggering self heal. Backport of: > Patch: https://review.gluster.org/21073 > BUG: 1593538 > Change-Id: I085fb33c882296545345f5df194cde7b6cbc337e > Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit 89636be4c73b12de2e11c75d8e59527bb243f147) updates: bz#1633015 Change-Id: I085fb33c882296545345f5df194cde7b6cbc337e Signed-off-by: Kotresh HR <khiremat@redhat.com>
* core: remove experimental xlators and associated testsShyamsundarR2018-09-172-77/+0
| | | | | | | | experimental xlators removed from 5.0 Change-Id: I47219d8b95efc3d5875ec9224d1e79f8371e9f76 Updates: bz#1628620 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* gfapi: revert several patchs that introduced pre/post attrsShyamsundarR2018-09-173-3/+3
| | | | | | | | | | | | | | Reverted the following: - 248152767b0599986bbb6bb35fc27197f6be6964 - 09943beb499617212f2985ca8ea9ecd1ed1b470e - d01f7244e9d9f7e3ef84e0ba7b48ef1b1b09d809 The reverts are redone by hand, due to clang format changes that made using git to revert the changes more tedious. Change-Id: I96489638a2b641fb2206a110298543225783f7be Updates: bz#1628620 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* gfapi: revert "gfapi: return pre/post attributes at callback for glfs api"ShyamsundarR2018-09-172-4/+2
| | | | | | | | | | | | | | This reverts commit 384562b294e9a7847403961e878a4daa0fff33eb. The revert is done manually owing to the clang format changes, and the 4.1 patch that reverts this fix is used as the source for the revert. The 4.1 patch has the commit ID: 98376e0c0a Change-Id: Ib2cbce9940f6a2a2755eb47bf332832147835e4d Updates: bz#1628620 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* Land part 2 of clang-format changesGluster Ant2018-09-1227-3732/+3806
| | | | | Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4 Signed-off-by: Nigel Babu <nigelb@redhat.com>
* Land clang-format changesGluster Ant2018-09-121-29/+55
| | | | Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b
* cluster/dht: Rework the debug xattr to get hashed subvolN Balachandran2018-09-071-0/+54
| | | | | | | | | | | | | | | | | | | The earlier implementation required the file to already exist when trying to get the hashed subvol. The reworked implementation allows a user to get the hashed subvol for any filename, whether it exists or not. Usage: getfattr -n "dht.file.hashed-subvol.<filename>" <parent dir> Eg:To get the hashed subvol for file-1 inside dir-1 getfattr -n "dht.file.hashed-subvol.file-1" /mnt/gluster/dir1 credit: rgowdapp@redhat.com Change-Id: Iae20bd5f56d387ef48c1c0a4ffa9f692866bf739 fixes: bz#1624244 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* afr: thin-arbiter read txn changesRavishankar N2018-09-051-0/+60
| | | | | | | | | | | | | | | | If both data bricks are up, read subvol will be based on read_subvols. If only one data brick is up: - First qeury the data-brick that is up. If it blames the other brick, allow the reads. - If if doesn't, query the TA to obtain the source of truth. TODO: See if in-memory state can be maintained for read txns (BZ 1624358). updates: bz#1579788 Change-Id: I61eec35592af3a1aaf9f90846d9a358b2e4b2fcc Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* New flag to glusterfsd binary to print libexec dirAravinda VK2018-09-051-0/+5
| | | | | | | | | | | | New CLI option for `glusterfsd` binary to get the path of libexec directory. This helps glusterd2 to detect the installed path of `gsyncd` and other binaries. Usage: `glusterfsd --print-libexecdir` Updates: bz#1193929 Change-Id: I8c1a74afd9acec7ee7bd3deabed9d9f20fe3fb5f Signed-off-by: Aravinda VK <avishwan@redhat.com>
* multiple files: calloc -> mallocYaniv Kaul2018-09-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xlators/cluster/stripe/src/stripe-helpers.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/tier.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-layout.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-helper.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-common.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/afr/src/afr.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/afr/src/afr-inode-read.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/bugs/replicate/bug-1250170-fsync.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/basic/gfapi/gfapi-async-calls-test.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/basic/ec/ec-fast-fgetxattr.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/xdr/src/glusterfs3.h: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/rpc-transport/socket/src/socket.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/rpc-lib/src/rpc-clnt.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible extras/geo-rep/gsync-sync-gfid.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-xml-output.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-rpc-ops.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-volume.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-system.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-snapshot.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-peer.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-global.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible It doesn't make sense to calloc (allocate and clear) memory when the code right away fills that memory with data. It may be optimized by the compiler, or have a microscopic performance improvement. In some cases, also changed allocation size to be sizeof some struct or type instead of a pointer - easier to read. In some cases, removed redundant strlen() calls by saving the result into a variable. 1. Only done for the straightforward cases. There's room for improvement. 2. Please review carefully, especially for string allocation, with the terminating NULL string. Only compile-tested! updates: bz#1193929 Original-Author: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Amar Tumballi <amarts@redhat.com> Change-Id: I16274dca4078a1d06ae09a0daf027d734b631ac2
* cluster/afr: Delegate name-heal when possiblePranith Kumar K2018-09-041-0/+112
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: When name-self-heal is triggered on the mount, it blocks lookup until name-self-heal completes. But that can lead to hangs when lot of clients are accessing a directory which needs name heal and all of them trigger heals waiting for other clients to complete heal. Fix: When a name-heal is needed but quorum number of names have the file and pending xattrs exist on the parent, then better to delegate the heal to SHD which will be completed as part of entry-heal of the parent directory. We could also do the same for quorum-number of names not present but we don't have any known use-case where this is a frequent occurrence so not changing that part at the moment. When there is a gfid mismatch or missing gfid it is important to complete the heal so that next rename doesn't assume everything is fine and perform a rename etc fixes bz#1622821 Change-Id: I8b002c85dffc6eb6f2833e742684a233daefeb2c Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* libgfchangelog: Fix changelog history APIKotresh HR2018-08-311-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: If requested start time and end time doesn't fall into first HTIME file, then history API fails even though continuous changelogs are avaiable for the requested range in other HTIME files. This is induced by changelog disable and enable which creates fresh HTIME index file. Cause and Analysis: Each HTIME index file represents the availability of continuous changelogs. If changelog is disabled and enabled, a new HTIME index file is created represents non availability of continuous changelogs. So as long as the requested start and end falls into single HTIME index file and not across, history API should succeed. But History API checks for the changelogs only in first HTIME index file and errors out if not available. Fix: Check in all HTIME index files for availability of continuous changelogs for requested change. fixes: bz#1622549 Change-Id: I80eeceb5afbd1b89f86a9dc4c320e161907d3559 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* cluster/afr: Delegate metadata heal with pending xattrs to SHDPranith Kumar K2018-08-281-10/+18
| | | | | | | | | | | | | | | | | | | Problem: When metadata-self-heal is triggered on the mount, it blocks lookup until metadata-self-heal completes. But that can lead to hangs when lot of clients are accessing a directory which needs metadata heal and all of them trigger heals waiting for other clients to complete heal. Fix: Only when the heal is needed but the pending xattrs are not set, trigger metadata heal that could block lookup. This is the only case where different clients may give different metadata to the clients without heals, which should be avoided. Updates bz#1622821 Change-Id: I6089e9fda0770a83fb287941b229c882711f4e66 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* posix-acl: skip acl_permits check when the owner setting GF_POSIX_ACL_xxxxKinglong Mee2018-08-272-0/+117
| | | | | | Change-Id: Iaeea470d040587027f37e0760ae27c4fc205a189 fixes: bz#1613098 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com>
* ctr: skip ctr xlator init if ctr is not enabledMohit Agrawal2018-08-271-6/+0
| | | | | | | | | | | | Problem: If ctr xlator is not required it consumes resources unnecessarily Solution: Call ctr xlator init only while feature is enabled Fixes: bz#1524323 Change-Id: I378113a390a286be20c4ade1b1bac170a8ef1b14 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* features/snapview-server: validate the fs instance before doing fop thereRaghavendra Bhat2018-08-241-0/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: ======== USS design depends on snapview-server translator communicating with each individual snapshot via gfapi. So, the snapview-server xlator maintains the glfs instance (thus the snapshot) to which a inode belongs to by storing it inside the inode context. Suppose, a file from a snapshot is opened by a application, and the fd is still valid from application's point of view (i.e. application has not yet closed fd). Now, if the snapshot to which the opened file belongs to is deleted, then the glfs_t instance corresponding to the snapshot is destroyed by snapview-server as part of snap deletion. But now, if the application does IO on the fd it has kept open, then snapview server tries to send that request to the corresponding snap via glfs instance for that snapshot stored in the inode context for the file on which the application is sending the fop. And this results in freed up glfs_t pointer being accessed and causes a segfault. FIX: === For fd based operations, check whether the glfs instance that the inode contains in its context, is still valid or not. For non fd based operations, usually lookup should guarantee that. But if the file was already looked up, and the client accessing the snap data (either NFS, or native glusterfs fuse) does not bother to send a lookup and directly sends a path based fop, then that path based fop should ensure that the fs instance is valid. Change-Id: I881be15ec46ecb51aa844d7fd41d5630f0d644fb updates: bz#1602070 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* xlators/playground: fix the template files with latest requirementsAmar Tumballi2018-08-222-3/+37
| | | | | | | | | | | | | | | * Make use of xlator_api * Make use of gf_msg() * Make use of mem-pool * Add a sample metrics dump function * Provide an dummy option, which can be initialized, and reconfigured * Add a test case to make sure template xlator is built and used with default fops * Make a change in rpc-coverage to run without lock tests. Updates: bz#1193929 Change-Id: I377dd67b656f440f9bc7c0098e21c0c1934e9096 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* snapshot:Fail snapshot creation if an empty description providedMohammed Rafi KC2018-08-191-0/+1
| | | | | | | | | | Snapshot description should have a valid string. Creating a snapshot with null value will cause reading from info file to fail with a null exception Change-Id: I9f84154b8e3e7ffefa5438807b3bb9b4e0d964ca updates: bz#1618004 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* performance/readdir-ahead: keep stats of cached dentries in sync with ↵Krutika Dhananjay2018-08-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | modifications PROBLEM: Stats of dentries that are readdirp'd ahead can become stale due to fops like writes, truncate etc that modify the file pointed by dentries. When a readdir is finally wound at offset corresponding to these entries, the iatts that are returned to the application come from readdir-ahead's cache, which are stale by now. This problem gets further aggravated when caching translators/modules cache and continue to serve this stale information. FIX: * Store the iatt in context of the inode pointed by dentry. * Whenever the inode pointed by dentry undergoes modification, in cbk of modification fop, update the iatt stored in inode-ctx to reflect the modification. * When serving a readdirp response from application, update iatts of dentries with the iatts stored in the context of inodes pointed by these dentries. * Some fops don't have valid iatts in their responses. For eg., write response whose data is still cached in write-behind will have zeroed out stat. In this case keep only ia_type and ia_gfid and reset rest of the iatt members to zero. - fuse-bridge in this case just sends "entry" information back to kernel and attr is not sent. - gfapi sets entry->inode to NULL and zeroes out the entire stat * There is one tiny race between the entry creation and a readdirp on its parent dir, which could cause the inode-ctx setting and inode ctx reading to happen on two different inode objects. To prevent this, when entry->inode doesn't eqaul to linked_inode, - fuse-bridge is made to send only "entry" information without attributes - gfapi sets entry->inode to NULL and zeroes out the entire stat. Change-Id: Ia27ff49a61922e88c73a1547ad8aacc9968a69df BUG: 1390050 Updates: bz#1390050 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
* tests: Add thin-arbiter.rc for writing tests for thin-arbiterPranith Kumar K2018-08-181-0/+44
| | | | | | fixes bz#1615789 Change-Id: I1f42e78fec5ddaf2a425dc4b82c9a20472aa146d Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* tests: Fix spurious failures in stats-dump.t testShyamsundarR2018-08-161-0/+8
| | | | | | | | | | | | | | | | | The test fails to grep and find queue_size, in a brick stats dump, having succesfully found aggr.* values in the same. The troubleshot is that, the writer thread in io-stats, that dumps this in a particular interval, truncates the file just before the grep attempts to read the contents, and hence the failure. The fix is to stop the dumper thread, and then wait for a couple of seconds and then check the output, so that the thread writer does not interfere with the test. Fixes: bz#1615582 Change-Id: I29f95488a2ad693abe1dd525b1d87a9d1eee29a2 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* tests: Fix for gfid-mismatch-resolution-with-fav-child-policy.t failurekarthik-us2018-08-141-0/+1
| | | | | | | | | | | | | | | | | | | This test was retried once on build https://build.gluster.org/job/regression-on-demand-multiplex/174/ (logs for the first try is not available with this build) Test case was failing in line #47 where it was was checking for the heal count to be 0. Line #51 had passed that means file got the gfid split brain resolved, and both the bricks had same gfids. At line #54 it again failed which checks for the md5sum on both the bricks. At this point the md5sum of the brick where the file got impunged had the md5sum same as the newly created empty file. This means the data heal has not happened for the file. At line #64 enabling granular-entry-heal faild, but without the logs it is not possible to debug this issue. Change-Id: I56d854dbb9e188cafedfd24a9d463603ae79bd06 fixes: bz#1615331 Signed-off-by: karthik-us <ksubrahm@redhat.com>
* tests: fix brick check ordersAtin Mukherjee2018-08-131-2/+2
| | | | | | | | | | | | fix brick checks for validating-server-quorum.t & quorum-validation.t ...and make brick_up_status_1 function more generic. Also fix a timing issue in bug-1482023-snpashot-issue-with-other-processes-accessing-mounted-path.t Change-Id: I797ef4cec5b160aafa979bae7151b1e99fcb48ac Updates: bz#1603063 Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
* tests: fix replace-brick-self-heal.t failureRavishankar N2018-08-131-1/+1
| | | | | | | | Please see BZ for details. Change-Id: Id9273432874bc6a452ac96b2b8c7a61ea6c5b98d Fixes: bz#1615239 Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* tests: potential fixes for tests/basic/afr/add-brick-self-heal.tRavishankar N2018-08-131-0/+7
| | | | | | | | Please see bug description for details. Change-Id: Ieb6bce6d1d5c4c31f1878dd1a1c3d007d8ff81d5 fixes: bz#1614654 Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* tests: Fix cleanup routine for some mux testsShyamsundarR2018-08-132-4/+3
| | | | | | | | | | | | | | | | | Some of the mux tests, set a trap to catch test exit and call cleanup. This will cause cleanup to be invoked twice in case the test times out, or even otherwise, as include.rc also sets a trap to cleanup on exit (TERM and others). This leads to the tarballs generated on failures for these tests to be empty and does not aid debugging. This patch corrects this pattern across the tests to the more standard cleanup at the end. Fixes: bz#1615037 Change-Id: Ib83aeb09fac2aa591b390b9fb9e1f605bfef9a8b Signed-off-by: ShyamsundarR <srangana@redhat.com>
* glusterd: Compare volume_id before start/attach a brickMohit Agrawal2018-08-101-92/+0
| | | | | | | | | | | | | | Problem: After reboot a node brick is not coming up because fsid comparison is failed before start a brick Solution: Instead of comparing fsid compare volume_id to resolve the same because fsid is changed after reboot a node but volume_id persist as a xattr on brick_root path at the time of creating a volume. Change-Id: Ic289aab1b4ebfd83bbcae8438fee26ae61a0fff4 fixes: bz#1612418 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* tests: Set heal-timeout to 5 secondsPranith Kumar K2018-08-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Shd keeps doing heals in a loop until it heals at least one entry in the previous run. A heal is termed successful only if it heals both metadata and entry/data heal i.e. the entry needs to be completely healed by just that healer. In tests/basic/afr/granular-esh/replace-brick.t test, brick-0 is old and brick-1 is new. After replace-brick only root-gfid will be present in brick-0's index 1) shd-thread corresponding to brick-0 does metadata heal, this creates root-gfid in brick-0's 'dirty' index. 2) Both healer threads corresponding to brick-0 and brick-1 now try to heal root-gfid and brick-1 gets the heal-domain lock. brick-0's shd-thread will experience a failure and it goes back to waiting for 10 minutes (cluster.heal-timeout). 3) When brick-1's healer-thread completes healing root-gfid it creates 5 files which create indices in brick-0, so until brick-0 doesn't trigger one more heal, heal won't happen. $HEAL_TIMEOUT is set at 120 seconds, which is lesser than cluster.heal-timeout, so decreasing this to 5 seconds so that the next heal is triggered which will do the heals. fixes bz#1613807 Change-Id: I881133fc28880d8615fbc4558a0dfa0dc63d7798 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* Revert "performance/readdir-ahead: Invalidate cached dentries if they're ↵Raghavendra G2018-08-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | modified while in cache" This reverts commit 7131de81f72dda0ef685ed60d0887c6e14289b8c. With the latest master, I created a single brick volume and some files inside it. [root@rhgs313-6 ~]# umount -f /mnt/fuse1; mount -t glusterfs -s 192.168.122.6:/thunder /mnt/fuse1; ls -l /mnt/fuse1/; echo "Trying again"; ls -l /mnt/fuse1 umount: /mnt/fuse1: not mounted total 0 ----------. 0 root root 0 Jan 1 1970 file-1 ----------. 0 root root 0 Jan 1 1970 file-2 ----------. 0 root root 0 Jan 1 1970 file-3 ----------. 0 root root 0 Jan 1 1970 file-4 ----------. 0 root root 0 Jan 1 1970 file-5 d---------. 0 root root 0 Jan 1 1970 subdir Trying again total 3 -rw-r--r--. 1 root root 33 Aug 3 14:06 file-1 -rw-r--r--. 1 root root 33 Aug 3 14:06 file-2 -rw-r--r--. 1 root root 33 Aug 3 14:06 file-3 -rw-r--r--. 1 root root 33 Aug 3 14:06 file-4 -rw-r--r--. 1 root root 33 Aug 3 14:06 file-5 d---------. 0 root root 0 Jan 1 1970 subdir [root@rhgs313-6 ~]# Conversation can be followed on gluster-devel on thread with subj: tests/bugs/distribute/bug-1122443.t - spurious failure. git-bisected pointed this patch as culprit. Change-Id: I1eb46f6c196f44fde8ce991840a0e724e6f50862 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Updates: bz#1390050
* coverity: Fix remaining SECURE_TEMP issues reportedShyamsundarR2018-08-031-3/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Two pending SECURE_TEMP issues still exist in the coverity reports, these are fixed by this patch. In both instances (where functions actually seem to be duplicates of each other) the need was for a FILE * and not an fd. Applied the same pattern in both places as in other parts of the code where mkstemp was used and later a FILE * was created from the resulting fd for use. Coverity report: https://download.gluster.org/pub/gluster/ glusterfs/static-analysis/master/glusterfs-coverity/ 2018-07-30-4d3c62e7/html/ Issues numbered: 382, 383 (named SECURE_TEMP) Further added tmpfile to the blacklist, so that future code changes do not add the same, into symbol-check.sh. Also corrected shellcheck errors in symbol-check.sh as a result of updating the same. Updates: bz#789278 Change-Id: I1d572a16ca5b5df2f597aeaa5f454fad34c8296e Signed-off-by: ShyamsundarR <srangana@redhat.com>
* performance/md-cache: update cache only from fops issued after previous ↵Raghavendra G2018-08-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | invalidation Invalidations are triggered mainly by two codepaths - upcall and write-behind unwinding a cached write with zeroed out stat. For the case of upcall, following race can happen: * stat s1 is fetched from brick * invalidation is detected on brick * invalidation is propagated to md-cache and cache is invalidated * s1 updates md-cache with a stale state For the case of write-behind, imagine following sequence of operations, * A stat s1 was issued from application thread t1 when size of file was s1 * stat s1 completes on brick stack, but yet to reach md-cache * A write w1 from application thread t2 extends file to size s2 is cached in write-behind and response is unwound with zeroed out stat * md-cache while handling write-cbk, invalidates cache * md-cache receives response for s1, updates cache with stale stat with size of s1 overwriting invalidation state Fix is to remember when s1 was incident on md-cache and update cache with results of s1 only if the it was incident after invalidation of cache. This patch identified some bugs in regression tests which is tracked in https://bugzilla.redhat.com/show_bug.cgi?id=1608158. As a stop gap measure I am marking following tests as bad basic/afr/split-brain-resolution.t bugs/bug-1368312.t bugs/replicate/bug-1238398-split-brain-resolution.t bugs/replicate/bug-1417522-block-split-brain-resolution.t bugs/replicate/bug-1438255-do-not-mark-self-accusing-xattrs.t Change-Id: Ia4bb9dd36494944e2d91e9e71a79b5a3974a8c77 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Updates: bz#1512691
* build: remove bundled arg-standaloneNiels de Vos2018-07-282-4/+0
| | | | | | | | | | | | | | libargp or argp-standalone is available on all commonly used distributions. There is no need to bundle an unmaintained version of argp-standalone in this repository anymore. FreeBSD places the argp.h file in /usr/local/include when argp-standalone is installed. This path is not added to CPPFLAGS by default, so thats done in configure.ac as well. Change-Id: I384a53ab0a008ec9d48fd83afeaf8fbc197e91ee Fixes: bz#1609337 Signed-off-by: Niels de Vos <ndevos@redhat.com>
* performance/readdir-ahead: Invalidate cached dentries if they're modified ↵Krutika Dhananjay2018-07-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | while in cache PROBLEM: Entries that are readdirp'd ahead can undergo modification in terms of writes, truncates which could modify their iatts. When a readdir is finally wound at offset corresponding to these entries, the iatts that are returned to the application come from readdir-ahead's cache, which are stale by now. This problem gets further aggravated when caching translators/modules cache and continue to serve this stale information. FIX: Whenever a dentry undergoes modification, in the cbk of the modification fop, a "dirty" flag (default 0) is set in its inode ctx. When it's time for readdir-ahead to serve these entries, it will read the inode ctx and check if the entry is "dirty", and if it is, set the entry's attrs to all zeroes, as an indicator to fuse, md-cache etc not to cache these attributes. Also there is one tiny race between the entry creation and a readdirp on its parent dir, which could cause the inode-ctx setting and inode ctx reading to happen on two different inode objects. To prevent this, fuse-bridge is made to drop entries for which dentry->inode is not the same as linked inode, in readdirp cbk. Change-Id: If7396507632b5268442ca580473d5155fee9cbef BUG: 1390050 Updates: bz#1390050 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Add multiple checks before attach/start a brickMohit Agrawal2018-07-272-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In brick mux scenario sometime glusterd is not able to start/attach a brick and gluster v status shows brick is already running Solution: 1) To make sure brick is running check brick_path in /proc/<pid>/fd , if a brick is consumed by the brick process it means brick stack is come up otherwise not 2) Before start/attach a brick check if a brick is mounted or not 3) At the time of printing volume status check brick is consumed by any brick process Test: To test the same followed procedure 1) Setup brick mux environment on a vm 2) Put a breaking point in gdb in function posix_health_check_thread_proc at the time of notify GF_EVENT_CHILD_DOWN event 3) unmount anyone brick path forcefully 4) check gluster v status it will show N/A for the brick 5) Try to start volume with force option, glusterd throw message "No device available for mount brick" 6) Mount the brick_root path 7) Try to start volume with force option 8) down brick is started successfully Change-Id: I91898dad21d082ebddd12aa0d1f7f0ed012bdf69 fixes: bz#1595320 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* All: run codespell on the code and fix issues.Yaniv Kaul2018-07-225-10/+10
| | | | | | | | | | | | Please review, it's not always just the comments that were fixed. I've had to revert of course all calls to creat() that were changed to create() ... Only compile-tested! Change-Id: I7d02e82d9766e272a7fd9cc68e51901d69e5aab5 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* glusterd: To find a compatible brick ignore diagnostics.brick-log-level optionMohit Agrawal2018-07-131-0/+9
| | | | | | | | | | | | | | | Problem: glusterd start a volume as a separate process instead of attaching with the already running process if volume option has different brick-log-level. There is no functionality impact on a brick if the option has different brick-log-level so glusterd should attach a brick with the already running process. Solution: Ignore brick-log-level option in unsafe_option BUG: 1599628 Change-Id: I72638ff2026fcd9332bc38e1144b1ef4a708820b fixes: bz#1599628 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* stack.h: fix the pass_through logicAmar Tumballi2018-07-031-0/+22
| | | | | | | | | | | | while fixing the coverity issues, we made a minor mistake in the pass through logic in STACK_WIND macro. Also, with this patch, made the code common to reduce possible future errors creeping in due to missing one place update. updates: bz#1193929 Change-Id: I6fcfd156d63b0a7e6208819872e565eacf774150 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* afr,ec: Print if the subvolume is up in statedumpPranith Kumar K2018-07-032-0/+56
| | | | | | fixes bz#1597156 Change-Id: I323eb9190e40b12df216698dcdba74a6d336beeb Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* cli: change volume create syntax of arbiter volumeAmar Tumballi2018-07-031-4/+9
| | | | | | | fixes: bz#1596524 updates: gluster/glusterd2#515 Change-Id: I8a46fa2fd1fd2b0e9fbcecd3bb18d348aed9c6a9 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* tests: remove tarissue.t from BAD_TESTRavishankar N2018-06-281-3/+0
| | | | | | | | | | BZ 1337791 marked this .t as bad based on the tar version being a likely suspect. Undoing this to check as it passes on the latest jenkins slaves. Change-Id: Ia581064a9c620351d3fe7aeef95d2644337952e1 fixes: bz#1595492 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Yaniv Kaul <ykaul@redhat.com>
* cluster/dht: Fix rename journal in changelogKotresh HR2018-06-241-0/+44
| | | | | | | | | | | | | | | With patch [1], renames are journalled only on cached subvolume. The dht sends the special key on the cached subvolume so that the changelog journals the rename. With single distribute sub-volume, the key is not being set. This patch fixes the same. [1] https://review.gluster.org/10410 fixes: bz#1583018 Change-Id: Ic2e35b40535916fa506a714f257ba325e22d0961 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* cluster/dht: refactor dht_lookupN Balachandran2018-06-211-0/+54
| | | | | | | | | | The dht lookup code is getting difficult to maintain due to its size. Refactoring the code will make it easier to modify it in future. Change-Id: Ic7cb5bf4f018504dfaa7f0d48cf42ab0aa34abdd updates: bz#1590385 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* ctime: Fix self heal of symlink in EC volumeKotresh HR2018-06-201-0/+69
| | | | | | | | | | | | | | | | | | | | Since IEEE Std 1003.1-2001 does not require any association of file times with symbolic links, there is no requirement that file times be updated by readlink() states [1]. stat on symlink file was generating a readlink fop on one of the subvolumes of ec set which in turn updates atime on that subvolume. This causes mdata xattr to be different across ec set and hence self heal fails. So based on [1], atime is no longer updated by readlink fop. [1] http://pubs.opengroup.org/onlinepubs/009695399/functions/readlink.html fixes: bz#1592509 Change-Id: I08bd3ca3bdb222bd18160b1aa58fc2f7630c8083 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* storage/posix: Handle ENOSPC correctly in zero_fillPranith Kumar K2018-06-142-0/+99
| | | | | | Change-Id: Icc521d86cc510f88b67d334b346095713899087a fixes: bz#1590710 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* libgfapi: Fix lookup on rootKotresh HR2018-05-282-0/+92
| | | | | | | | | | | | | | | | | | | Lookup on root was sending "/" as the path. This will break the basename calculation in loc_copy and hence lookup on root was failing if the loc_copy was involved in the stack. With ctime, a first lookup on root initiates a metadata self heal because of ctime xattr not being same on all afr subvolumes. This results in loc_copy and hence the failure of lookup. Fix would be to send path with "." for the root. fixes: bz#1582516 Change-Id: Iafe4b99f249a4f5034ad34c1d30590de0e35aa0d Signed-off-by: Kotresh HR <khiremat@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-21 05:42:19 +0000