summaryrefslogtreecommitdiffstats
path: root/tests/features
Commit message (Collapse)AuthorAgeFilesLines
* glupy: portability fixesEmmanuel Dreyfus2014-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes portability problems so that NetBSD passes tests/features/glupy.t - Use python-config to detect python build environment on all systems, not just Linux and Darwin. - Get the site-package directory from python and make sure we install glupy.py there, Previously we installed within glusterfs prefix, which caused a problem if it was different that python's prefix. - Set PYTHONPATH for tests so that the detected site-packages is used in python's search path. This should be useless, but let us have it just in case. - Pass glupy.so path from glusterfsd to glupy.py through an environment variable and use it in CDLL instead of "", as the later seems not portable (at least it fails on NetBSD). - Use gil_init_key pthread_getspecific to avoid deadlocks (that code was #ifdef out, perhaps because it was not needed on Linux, but it seems to be required for NetBSD. - Recover the error message from Python and send it to the logs to help debugging problems. BUG: 1129939 Change-Id: Icc71e77d6940f0759cc14c5c5cf7ca6fa431e0d2 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8978 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* Regression test portability: loopback devicesEmmanuel Dreyfus2014-10-301-8/+6
| | | | | | | | | | | | | | | | | | Introduce functions to deal with loopback devices setup, mount and umount. Remove test for xfsprogs for non Linux systems, as loopback devices can be populated with other filesystems (e.g.: FFS for NetBSD) While there, remove mount.nfs test for non Linux systems. At least NetBSD has it in base system as mount_nfs. BUG: 1129939 Change-Id: I816b36e1d3e6933f92acf19d9be8eeaaa333356e Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8914 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: disallow CBC cipher modesJeff Darcy2014-10-271-0/+17
| | | | | | | | | | | | | | | | | | | | | | This is related to CVE-2014-3566 a.k.a. POODLE. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-3566 POODLE is specific to CBC cipher modes in SSLv3. Because there is no way to prevent SSLv3 fallback on a system with an unpatched version of OpenSSL, users of such systems can only be protected by disallowing CBC modes. The default cipher-mode specification in our code has been changed accordingly. Users can still set their own cipher modes if they wish. To support them, the ssl-authz.t test script provides an example of how to combine the CBC exclusion with other criteria in a script. Change-Id: Ib1fa547082fbb7de9df94ffd182b1800d6e354e5 BUG: 1155328 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8962 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Regression test portability: truncateEmmanuel Dreyfus2014-10-011-2/+2
| | | | | | | | | | | | | | Use truncate -s 1M instead of truncate --size=1m for portability sake BUG: 1129939 Change-Id: I5bf6ca1f9bb4fa3c91796a659a06bf368776b3e5 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8894 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net>
* Sane default for SSL on OSXHarshavardhana2014-09-291-1/+1
| | | | | | | | | | | - /opt/local is not preferred anymore use /usr/local Change-Id: I30cad4cbd28850063f26121cace05371e13bb314 BUG: 1129939 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8872 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Use sane OS-dependent defaults for SSL configurationEmmanuel Dreyfus2014-09-261-3/+8
| | | | | | | | | | | | Current code assumes /etc/ssl exists, which may not be the case. Attempt to guess sane default for a few OS. BUG: 1129939 Change-Id: I0f3168f79b8f4275636581041740dfcaf25f3edd Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8790 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* porting: Provide setfattr/getfattr implementationHarshavardhana2014-09-053-22/+22
| | | | | | | | | | | | | | | | - Use 'getfattr' properly avoid redundant options during xattr query - Untabify certain parts of tests (remove tabs) - Avoid backtick evaluation for certain values to make code more portable. - Use awk on FreeBSD/Darwin, since 'wc' implementation is broken and adds spurious spaces in its output. Change-Id: I7dcc0b70874e43b4cda8c306ed18a31b7a3f990a BUG: 1131713 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8520 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org> Tested-by: Emmanuel Dreyfus <manu@netbsd.org>
* porting: various fixes regression tests OSX/FreeBSDHarshavardhana2014-08-293-3/+3
| | | | | | | | | | | | | | | | | | | | - `wc -l` on OSX/FreeBSD adds spurious spaces, this clobbers up TAP output parsers - fix it. - `umount -l` doesn't exist on OSX/FreeBSD use 'umount -f' if available. - Add check for 'file' version, to handle mime type variations across versions - Converge 'glusterfs --attribute-timeout=0 --entry-timeout=0' into '$GFS' - Modify remaining 'mount -t nfs' to use 'mount_nfs' - Update sha1sum for OSX to use 'openssl sha1'. Change-Id: Id1012faa5d67a921513d220e7fa9cebafe830d34 BUG: 1131713 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8501 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* tests: weighted-rebalance.t shouldn't write to '/dev/tty'Harshavardhana2014-08-061-2/+2
| | | | | | | | | | | | | | | | | | | | On our jenkins instance "/dev/tty" doesn't exist, necessary output fails as below message ~~~ ./tests/features/weighted-rebalance.t: \ line 72: /dev/tty: No such device or address ~~~ Comment out the debugging code Change-Id: Iba29b80c8ba2dcaab3d6654d7c54332a915bffb8 BUG: 1114680 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8421 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* dht: support heterogeneous brick sizesJeff Darcy2014-07-121-0/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calculation of layouts now considers the size of each brick, so that smaller bricks don't get an "unfair" share of allocations and start returning ENOSPC while the larger bricks still have plenty of space. The observation has been made that some clients might get ENOTCONN when trying to fetch disk-size information, and end up calculating layouts differently. The following meta-observations can be made. (1) This scenario is extremely unlikely in configurations with AFR. (2) The most likely consequence of this scenario is that some files will be placed sub-optimally by the client with the obsolete (non-weighted) layout. They'll still be found anyway, so this isn't a show stopper. (3) Without this patch it's *guaranteed* that some files will be placed sub-optimally, because any layout that fails to account for brick sizes is sub-optimal. (4) We shouldn't be doing fix-layout from two nodes simultaneously anyway. That's inefficient at best. Any instances of such behavior are separate bugs, which should be fixed separately. (5) In the most extreme edge case, two nodes doing weighted and non-weighted layout fixes could race and end up creating an internally inconsistent layout. This condition is still transient; it will be detected and repaired automatically the next time anyone fetches the layout. (If it's not that's also a preexisting bug that can show up in other contexts.) In conclusion, it's not the purpose of this patch to fix bugs elsewhere in DHT. Its purpose is to make life incrementally better for users who add new hardware with larger disks etc. than the older equipment. It's only one part of an ongoing process to improve layout management and repair, all the way up to support for multiple hash rings or tiering. Change-Id: I05eb6f9eface9cdaf8622e0260c8c7f29020447f BUG: 1114680 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8093 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* TESTS : replace "umount" with "force_umount" giving 5 retries.Sachin Pandit2014-07-022-2/+4
| | | | | | | | | | | Change-Id: I89dd87b9843273c57843bb28706f284e32debc48 BUG: 1092850 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8167 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc/auth: allow SSL identity to be used for authorizationJeff Darcy2014-07-021-0/+53
| | | | | | | | | | | | | | | | | | | Access to a volume is now controlled by the following options, based on whether SSL is enabled or not. * server.ssl-allow: get identity from certificate, no password needed * auth.allow: get identity and matching password from command line It is not possible to allow both simultaneously, since the connection itself is either using SSL or it isn't. Change-Id: I5a5be66520f56778563d62f4b3ab35c66cc41ac0 BUG: 1114604 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/3695 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* performance/readdir-ahead: introduce directory read-ahead translatorBrian Foster2013-09-041-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a translator to improve the performance of typical, sequential directory reads (i.e., ls). readdir-ahead begins preloading the contents of a directory on open and serves readdir requests from the preloaded content. readdir-ahead is currently implemented to only handle the single threaded directory read case. readdir-ahead is currently disabled by default. It can be enabled with the following command: gluster volume set <volname> readdir-ahead on The following are results of a getdents test on a single brick volume. Test info: - Single VM, gluster client/server. - Volume mounted with native client using --gid-timeout=2. - getdents on single directory with 100k 0-byte files. Test results: - !readdir-ahead read 3120080 bytes from offset 0 3 MiB, 4348 ops, 0:00:07.00 (416.590 KiB/sec and 594.4737 ops/sec) - readdir-ahead read 3120080 bytes from offset 0 3 MiB, 4348 ops, 0:00:03.00 (820.116 KiB/sec and 1170.3043 ops/sec) BUG: 980517 Change-Id: Ieceb9e1eb47d1d5b5af8da2bf03839537364653f Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/4519 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glupy: Importing Jeff's glupy project into glusterfsRam Raja2013-05-101-0/+29
Change-Id: I3891ef6eaf6ede7c8cbedc3298ce2501a69b2b05 BUG: 961856 Original-author: Jeff Darcy <jdarcy@redhat.com> Signed-off-by: Ram Raja <rraja@redhat.com> Reviewed-on: http://review.gluster.org/4906 Reviewed-by: Justin Clift <jclift@redhat.com> Tested-by: Justin Clift <jclift@redhat.com>