summaryrefslogtreecommitdiffstats
path: root/tests
Commit message (Collapse)AuthorAgeFilesLines
* dht/rebalance: Throttle rebalanceSusant Palai2015-05-071-0/+42
| | | | | | | | | | | | Throttle value will be "normal" by default. For throttling down, a thread will be put in to sleep. And for throttling up, gf_defrag_process_dir will wake up the sleeping threads. Change-Id: I74d530e3effd6e60e6eec81ccc8ff65789fa9c13 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/10526 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/afr : Prevent inode-evict during split-brain resolutionAnuradha2015-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | 1) Provided setfattr command to set timeout for split-brain choice. 2) If split-brain inspection/resolution is being done from the mount for a file, ref the inode when split-brain-choice is set. This inode will be unconditionally unref-ed after timeout seconds set by the user/default otherwise. 3) Updated the doc and testcase to reflect the changes. Change-Id: I15c9037dee28855f21e680e7e3632e1f48dba4e1 BUG: 1209104 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/10134 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* bitrot/glusterd: Bitrot scrub pause/resume should give proper errorGaurav Kumar Garg2015-05-071-0/+37
| | | | | | | | | | | | | | bitrot scrubber paused/resume command should give proper error messages if scrubber already pause/resume and user again try to perform same operation on a volume. Change-Id: I01ad69c80f03b177535a4e5f1c95ab7709a804b0 BUG: 1210684 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10209 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: remove replace brick with data migration support form cli/glusterdGaurav Kumar Garg2015-05-075-42/+33
| | | | | | | | | | | | | | | | Replace-brick operation with data migration support have been deprecated from gluster. With this fix replace brick command will support only one commad gluster volume replace-brick <VOLNAME> <SOURCE-BRICK> <NEW-BRICK> {commit force} Change-Id: Ib81d49e5d8e7eaa4ccb5830cfec2bc081191b43b BUG: 1094119 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10101 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* ctr/xlator: Named lookup heal of pre-existing files, before ctr was ON.Joseph Fernandes2015-05-061-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: The CTR xlator records file meta (heat/hardlinks) into the data. This works fine for files which are created after ctr xlator is switched ON. But for files which were created before CTR xlator is ON, CTR xlator is not able to record either of the meta i.e heat or hardlinks. Thus making those files immune to promotions/demotions. Solution: The solution that is implemented in this patch is do ctr-db heal of all those pre-existent files, using named lookup. For this purpose we use the inode-xlator context variable option in gluster. The inode-xlator context variable for ctr xlator will have the following, a. A Lock for the context variable b. A hardlink list: This list represents the successful looked up hardlinks. These are the scenarios when the hardlink list is updated: 1) Named-Lookup: Whenever a named lookup happens on a file, in the wind path we copy all required hardlink and inode information to ctr_db_record structure, which resides in the frame->local variable. We dont update the database in wind. During the unwind, we read the information from the ctr_db_record and , Check if the inode context variable is created, if not we create it. Check if the hard link is there in the hardlink list. If its not there we add it to the list and send a update to the database using libgfdb. Please note: The database transaction can fail(and we ignore) as there already might be a record in the db. This update to the db is to heal if its not there. If its there in the list we ignore it. 2) Inode Forget: Whenever an inode forget hits we clear the hardlink list in the inode context variable and delete the inode context variable. Please note: An inode forget may happen for two reason, a. when the inode is delete. b. the in-memory inode is evicted from the inode table due to cache limits. 3) create: whenever a create happens we create the inode context variable and add the hardlink. The database updation is done as usual by ctr. 4) link: whenever a hardlink is created for the inode, we create the inode context variable, if not present, and add the hardlink to the list. 5) unlink: whenever a unlink happens we delete the hardlink from the list. 6) mknod: same as create. 7) rename: whenever a rename happens we update the hardlink in list. if the hardlink was not present for updation, we add the hardlink to the list. What is pending: 1) This solution will only work for named lookups. 2) We dont track afr-self-heal/dht-rebalancer traffic for healing. Change-Id: Ia4bbaf84128ad6ce8c3ddd70bcfa82894c79585f BUG: 1212037 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/10370 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/bitrot: Follow xattr naming conventionsVenky Shankar2015-05-061-1/+1
| | | | | | | | | | | | | | | | | Instead of "trusted.glusterfs.bit-rot.*" use "trusted.bit-rot.*" NOTE: With this patch, data on existing volumes would be resigned (which should be OK as of now since we do not expect many users as of now :-)) Change-Id: I926c7bca266a9c8f2cb35d57c4d0359aa5cecfa0 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/10181 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libgfapi : anonymous fd supportJiffin Tony Thottan2015-05-053-1/+128
| | | | | | | | | | | | | | | | Anonymous fd's are floating fd assigned to a glusterfs client without a explicit file open. Here either it will create a new anonymous fd or existing anonymous fd in the client stack for requested file.The anonymous fd's are mainly used for IO's. This patch introduces two api's glfs_h_anonymous_read and glfs_h_anonymous_write which performs read and write respectively Change-Id: Id646f2220e8387b2f8bb244c848dc1db6761444f BUG: 1204651 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9971 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cleanup: Unmount all fuse mountsPranith Kumar K2015-05-051-0/+3
| | | | | | | | | Change-Id: I851b4bd74b595d739f7bf9eea920d07e31fa5fbc BUG: 1202244 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10540 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tiering: Send both attach-tier and tier-start togetherMohammed Rafi KC2015-05-053-9/+78
| | | | | | | | | | | | After attaching tier, we have to start tier rebalance process. This patch is to trigger tier start along with attch-tier. Change-Id: I39380f95123f0087a82213ef263f9f33adcc5adc BUG: 1214222 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10363 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* Tests: wworkaround NetBSD failures in cdc.tEmmanuel Dreyfus2015-05-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The volume reset network.compression operation cause brick processes to be restarted. If the volume is already started, a brick process is already there and the restart will fail, as the brick TCP port is already in use. Because the new brick process is not started, the volume is left with no brick online, and the volume stop operation will timeout waiting for bricks to stop. Obviosuly we have two bugs here - If volume reset network.compression needs to restart the bricks, it should first make sure the previous brick process is terminated - volume stop should not wait forever for bricks to come back online This change does not fix the bugs but just makes sure the volume is stoped before volume reset network.compression, so that the failure oes not happen. BUG: 1129939 Change-Id: I9cd5cdc767ef6ee9dd31f2121d672dc3bfdce45f Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10553 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Upcall: Send stat as part of cache_invalidation notificationsSoumya Koduri2015-05-051-4/+13
| | | | | | | | | | | | | | | | Have added support to send attributes of both entries and its parent (include oldparent in case of RENAME fop) in the same notification request to avoid multiple rpc requests. Also, made changes in gfapi to send parent object and its attributes changed in a single upcall event. Change-Id: I92833da3bcec38d65216921c2ce4d10367c32ef1 BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10460 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* tests: Unmount aux quota mountPranith Kumar K2015-05-051-0/+2
| | | | | | | | | | Change-Id: Ie4ec40230e6b92d2e694b804a991246050b5fa51 BUG: 1202244 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10539 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Sachin Pandit <spandit@redhat.com>
* afr: add arbitration supportRavishankar N2015-05-051-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | Add logic in afr to work in conjunction with the arbiter xlator when a replica 3 arbiter volume is created. More specifically, this patch: * Enables full locks for afr data transaction for such volumes. * Removes the upfront marking of pending xattrs at the time of pre-op and defer it to post-op. (This is an arbiter independent change and is made for all afr transactions.) * After pre-op stage, check if we can proceed with the fop stage without ending up in split-brain by examining the changelog xattrs. * Unwinds the fop with failure if only one source was available at the time of pre-op and the fop happened to fail on particular source brick. * Skips data self-heal if arbiter brick is the only source available. * Adds the arbiter-count option to the shd graph. This patch is a part of the arbiter logic implementation for 3 way AFR details of which can be found at http://review.gluster.org/#/c/9656/ Change-Id: I9603db9d04de5626eb2f4d8d959ef5b46113561d BUG: 1199985 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/10258 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* libglusterfs: Fix cluster_entrylk retryPranith Kumar K2015-05-041-2/+4
| | | | | | | | | Change-Id: I92ff46bae36d39a449d4bbaedc88a322992f65eb BUG: 1215265 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10391 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* cluster/ec: Fix dictionary compare functionPranith Kumar K2015-05-041-0/+4
| | | | | | | | | | | | | | | | | | | | If both dicts are NULL then equal. If one of the dicts is NULL but the other has only ignorable keys then also they are equal. If both dicts are non-null then check if for each non-ignorable key, values are same or not. value_ignore function is used to skip comparing values for the keys which must be present in both the dictionaries but the value could be different. geo-rep's stime xattr doesn't need to be present in list xattr but when getxattr comes on stime xattr even if there aren't enough responses with the xattr we should still give out an answer which is maximum of the stimes available. Change-Id: I8de2ceaa2db785b797f302f585d88e73b154167d BUG: 1207712 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10078 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
* snapshot/uss: fix regression failure in bug-1162498.tAvra Sengupta2015-05-043-7/+6
| | | | | | | | | | | | | | | .snaps seems to take some time, before it is available based on the state of the system. Using EXPECT_WITHIN instead of TEST to check the contents of .snaps, hence giving it some time to come up. Change-Id: Iac166500d5a09ba8bab00d994c27a9ad0a01b9c3 BUG: 1218120 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/10518 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* tests: fix failures due to not unmounting $M2 (/mnt/glusterfs/2)Jeff Darcy2015-05-041-0/+7
| | | | | | | | | | | | | | | | | | | | | | | Our failure to unmount meant that both mkdir and rmdir would fail in cleanup(). Because one of those mkdirs was the last thing cleanup() executed, it would fail, so the test would fail, so the entire regression run would fail. The fix has two parts. (1) Unmount the offending directory. (2) Make sure cleanup() returns success even if that last mkdir failed. That might keep us from consistently blowing up regression runs on the very first tests (basic/afr/data-self-heal.t) that we execute. Change-Id: I7a9761bd28761a5ee2face3db8112e9c3f6c5dc8 BUG: 1163543 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/10536 Reviewed-by: Justin Clift <justin@gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Enable readdir-ahead by default on new volumesanand2015-05-041-3/+0
| | | | | | | | | | | | | | With gluster-3.7, 'performance.readdir-ahead' will be enabled by default on new volumes when the cluster op-version supports it. Change-Id: I44e76a69e7d1c11e6dfad72c941caf887bb810ee BUG: 1216187 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/10433 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* tiering/cli: Check replica count and bricks are proper or notMohammed Rafi KC2015-05-041-1/+2
| | | | | | | | | | | | | | Right now, attach-tier calls parsing function for add-brick. Add-brick does not have any check for brick count and replca count compatibility. Change-Id: I44ec13eadffc003a9ebf8c4eb0193df559933a68 BUG: 1215122 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10428 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quota: support for inode quota in quota.confvmallika2015-05-041-0/+41
| | | | | | | | | | | | | | | | | Currently when quota limit is set, corresponding gfid is set in quota.conf. This patch supports storing inode-quota limits in quota.conf and also stores additional byte for each gfid to differentiate between usage quota limit and inode quota limit. Change-Id: I444d7399407594edd280e640681679a784d4c46a BUG: 1202244 Signed-off-by: vmallika <vmallika@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/10069 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: gluster volume status should show status of bitrot and scrubber daemonGaurav Kumar Garg2015-05-041-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | Command gluster volume status <VOLNAME> should show the status of bitrot and scrubber daemon and its pid information. Along with displaying bitrot and scrubber daemon information in gluster volume status command there should be command to show its individual status separately. Command to show individual status of bitrot and scrubber daemon will following. command to show only bitd daemon information will be gluster volume status <VOLNAME> bitd command to show only scrubber daemon information gluster volume status <VOLNAME> scrub Change-Id: Id86aae1156c8c599347c98e2a538f294d37376e4 BUG: 1209752 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10175 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com>
* tests: Check aux umount is unmounted for quota testsPranith Kumar K2015-05-0424-24/+57
| | | | | | | | | | Change-Id: If57d08f3446755ea41f66ca258efcc8ea5a89063 BUG: 1217701 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10480 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests: Fix spurious failuresPranith Kumar K2015-05-033-3/+3
| | | | | | | | | | | | | - Use REBALANCE_TIMEOUT in EXPECT_WITHIN - Use fdatasync to prevent write-behind from giving success - Add logfile to glupy Change-Id: I51ab51644aaa4aa9d49f185e7b8959bb58be966b BUG: 1217766 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10487 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: Disable flush behind so that file will be closedPranith Kumar K2015-05-031-0/+1
| | | | | | | | | | | Change-Id: I97eb8d236448e8783f09b4922aa465a2b1b3979b BUG: 1217788 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10488 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* features/changelog: Consider only changelog on/off as changelog breakageKotresh HR2015-05-023-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier, both chagelog on/off and brick restart were considered to be changelog breakage and treated as changelog not being continuous. As a result, new HTIME.TSTAMP file was created on both the above cases. Now the change is made such that only on changelog enable/disable, the changelog is considered to be discontinuous. New HTIME.TSTAMP file is not created on brick restart, the changelogs files are appended to last HTIME.TSTAMP file. Treating changelog as continuous in above scenario is important as changelog history API will fail otherwise. It can successfully get changes between start and end timestamps only when changelog is continuous (Changelogs in single HTIME.TSTAMP file are treated as continuous). Without this change, changelog history API would fail, and it would become necessary to fallback to other mechanisms like xsync FSCrawl in case geo-rep to detect changes in this time window. But Xsync FSCrawl would not be applicable to other consumers like glusterfind. Rationale: 1. In plain distributed volume, if brick goes down, no I/O can happen onto the brick. Hence changelog is intact with data on disk. 2. In distributed replicate volume, if brick goes down, since self-heal traffic is captured in changelog. Eventually, I/O happened whend brick down is captured in changelog. Change-Id: I2eb66efe6ee9a9228fb1fcb38d6e7696b9559d5b BUG: 1211327 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10222 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System
* nfs: fix spurious failure in bug-1166862.tNiels de Vos2015-04-301-11/+11
| | | | | | | | | | | | | | | In some environments, "showmount" could return an NFS-client that does not start with "1". This would cause the test-case to fail. The check is incorrect, the number of lines should get counted instead. Also moving the test-case to the .../nfs/... subdirectory. BUG: 1166862 Change-Id: Ic03aa8145ca57d78aea01564466e924b03bb302a Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10419 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: volume info should not show "feature.scrub: resume" if scrub resumedGaurav Kumar Garg2015-04-301-0/+46
| | | | | | | | | | | | | | | | | | | | | | If bitrot is enable on the volume and if user paused the scrub process and then resume the scrub process then command #gluster volume info <VOLNAME> should show status of option features.scrub: Active. If bitrot is enable on the volume and user disable the bitrot on the volume then command #gluster volume info <VOLNAME> should show status of option features.scrub: Inactive. If bitrot is enable on the volume and user paused the scrub porcess then command gluster volume info <VOLNAME> should show the status of option features.scrub: pause. Change-Id: I55972eef3b8570b7cb05dc28700d4e28dc45a86a BUG: 1209818 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10207 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* tests: Await for graph switch before testing open fop countVijay Bellur2015-04-293-1/+12
| | | | | | | | | | | | | | | | | | | | | In performance/open-behind.t, a test for open fop reaching the brick is done by switching off open-behind and performing a read operation. If the read operation is performed before a graph switch, the read happens on the old graph and hence open does not get accounted in the brick. To overcome this EXPECT_WITHIN 10 seconds has now been added to ensure that a graph switch has happened. The read operation happens subsequently after the graph switch. Cleaned up a "No volumes present" message from stderr while doing this. Change-Id: I1e1c0d7e4bd2057520b4dd46157d18f30837b8c9 BUG: 1213066 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10293 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Raghavendra Bhat <raghavendra@redhat.com>
* glusterd: initialize snapd svc at volume restore pathAtin Mukherjee2015-04-261-0/+26
| | | | | | | | | | | | | | | | In restore path snapd svc was not initialized because of which any glusterd instance which went down and came back may have uninitialized snapd svc. The reason I used 'may' is because depending on the nodes in the cluster. In a single node cluster this wouldn't be a problem since glusterd_spawn_daemon takes care of initializing it. Change-Id: I2da1e419a0506d3b2742c1cf39a3b9416eb3c305 BUG: 1213295 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10304 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaushal M <kaushal@redhat.com>
* Tests: fix spurious failures in trash.tEmmanuel Dreyfus2015-04-261-46/+69
| | | | | | | | | | | | Fix timing problems that cause rare spurious failures in trash.t BUG: 1129939 Change-Id: I673e033b53b6b4bb993c22fadbdcee725b2c1e96 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10360 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* nfs: make it possible to disable nfs.mount-rmtabNiels de Vos2015-04-261-0/+66
| | | | | | | | | | | | | | | | | | | | When there are many NFS-clients doing very often mount/unmount actions, the updating of the 'rmtab' can become a bottleneck and cause delays. In these situations, the output of 'showmount' may be less important than the responsiveness of the (un)mounting. By setting 'nfs.mount-rmtab' to the value "/-", the cache file is not updated anymore, and the entries are only kept in memory. BUG: 1169317 Change-Id: I40c4d8d754932f86fb2b1b2588843390464c773d Reported-by: Cyril Peponnet <cyril@peponnet.fr> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9223 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* features/trash : Notify CTR translator if an unlink happens to a fileJiffin Tony Thottan2015-04-241-0/+71
| | | | | | | | | | | | | | | | | | | | | This implementation is same as the posix_unlink_cbk() where CTR sends a request during a unlink to send the number of links to the inode and posix obliges sending it using the unwind xdata dict. For Trash xlator a unlink is stat + mkdir(if parent is not present) + rename. And hence this is handled in trash_unlink_rename_cbk(). Change-Id: I402e83567b88e3c9fe171379693c82937af567f9 BUG: 1205545 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Anoop C S <achiraya@redhat.com> Reviewed-on: http://review.gluster.org/9989 Tested-by: NetBSD Build System Tested-by: Joseph Fernandes Reviewed-by: Joseph Fernandes Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Tests: trash.t portability fixesEmmanuel Dreyfus2015-04-221-47/+63
| | | | | | | | | | | | | | | | | | Fix various portability problems in trash.t - work around timing issues - avoid wildcard usage only supported by bash Original patch from Anoop C S and Jiffin Tony Thottan. Removed LONGER_HEAL_TIMEOUT from previous patch as it seems to run fine without it now. BUG: 1129939 Change-Id: I0f6f484209ef4db7e0a7b733b863927cb248e73e Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10327 Reviewed-by: Anoop C S <achiraya@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: support for tier volumes 'detach start' and 'detach commit'Dan Lambright2015-04-221-10/+12
| | | | | | | | | | | | | | | | | | | | | These commands work in a manner analagous to rebalancing when removing a brick. The existing migration daemon detects "detach start" and switches to moving data off the hot tier. While in this state all lookups are directed to the cold tier. gluster v detach-tier <vol> start gluster v detach-tier <vol> commit The status and stop cli commands shall be submitted separately. Change-Id: I24fda5cc3ba74f5fb8aa9a3234ad51f18b80a8a0 BUG: 1205540 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: root <root@localhost.localdomain> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/10108 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: NetBSD Build System
* Tests: python portabilityEmmanuel Dreyfus2015-04-181-6/+6
| | | | | | | | | | | | | Make sure to use $PYTHON defined from tests/env.rc so that we get the path to the actually detected python interpreter. BUG: 1129939 Change-Id: Ibf3e88f190d5e0c6a4a08e8d5ef9d0b5cba5078a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10286 Tested-by: NetBSD Build System Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Geo-rep: Adding regression tests for geo-repVijaykumar Koppad2015-04-1313-129/+1511
| | | | | | | | | | | | | | | | | | | | | | This patch introduces upstream regression suit for geo-replication * Modifies cleanup (tests/include.rc) to remove everything but hook-scripts. Prerequisites: * Passwordless SSH from root to root of current host. * Export /build/install/sbin and /build/install/bin to PATH variable for root user. Change-Id: I433dd8bbb17edba9baaf516fe0dce3133ba39184 BUG: 1101111 Signed-off-by: Vijaykumar Koppad <vkoppad@redhat.com> Signed-off-by: Ajeet Jha <ajha@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/7392 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Restarting glusterd should not reset bitrot tunable value to defaultGaurav Kumar Garg2015-04-131-0/+46
| | | | | | | | | | | | | | | | | | | Previously when user restart glusterd then bitrot tunable value for option "scrub-throttle", "scrub-frequency", "scrub" cleared. glusterd was not storing these bitrot tunable value properly. With this fix it will store scrub-throttle, scrub-frequency, scrub, bitrot tunable value in /var/lib/glusterd/vols/<volname>/info file and it will resume these value when glusterd restart. Change-Id: I58e756e14fbb8513a6f878f808ea148e7aa33cb0 BUG: 1209751 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10159 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* nfs: do not overwrite the return value and errno of resolve operationRaghavendra Bhat2015-04-132-0/+59
| | | | | | | | | | | | | | * In auth status check which is done in the resume function, the op_ret and op_errno values saved in nfs3_call_state are overwritten by the return value of the auth status check function. Change-Id: Id4682ddd399c78a1cef6313a534892ef309c57a6 BUG: 1210338 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/10179 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Tests: fix spurrious failure in mount-nfs-auth.tEmmanuel Dreyfus2015-04-111-2/+2
| | | | | | | | | | | | Work around a timing-caused spurious error introduced by http://review.gluster.org/10047 BUG: 1129939 Change-Id: I0597377799f2464d9516fe710fa6e39c1f67a858 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/10182 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/ec: Fix readdir de-itransformPranith Kumar K2015-04-111-0/+20
| | | | | | | | | | | | | | | | | | | Problem: gf_deitransform returns the glbal client-id in the complete graph. So except for the first disperse subvolume under dht, all the other disperse subvolumes will return a client-id greater than ec->nodes, so readdir will always error out in those subvolumes. Fix: Get the client subvolume whose client-id matches the client-id returned by gf_deitransform of offset. Change-Id: I26aa17504352d48d7ff14b390b62f49d7ab2d699 BUG: 1209113 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10165 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
* glusterd: bitd daemon should not start on the node which dont have any brickGauravKumarGarg2015-04-101-0/+55
| | | | | | | | | | | | | | | | | | If user enable bitrot from node1 which have brick then glusterd starting bitd daemon on node1 as well as glusterd starting bitd deamon on another node2 which does not have any brick (node1 and node2 are part of cluster). With this fix glusterd will not start bitd daemon on the node which don't have brick. Change-Id: Ic1c68d204221d369d89d628487cdd5957964792e BUG: 1207029 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10071 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd/snapshot : While snapshot restore, compute quota checksum.Sachin Pandit2015-04-101-0/+39
| | | | | | | | | | | | | | | | | | Problem : During snapshot restore we anyways copy the quota conf file after that we need to compute the checksum for that. If not, there might be a checksum mismatch during glusterd handshake. Solution : Compute a checksum file for quota conf file if its present. Change-Id: Ic4a6567c6ede9923443abf4ca59380679be88094 BUG: 1202436 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9901 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: remove-brick status/stop should not show output for non-existing brickGaurav Kumar Garg2015-04-093-2/+38
| | | | | | | | | | | | | | | | | | | Previously when user start remove-brick operation on a volume then by giving non-existing brick for remove-brick status/stop command it was showing remove-brick status/stoping remove-brick operation on a volume. With this fix it will validate bricks which user have given for remove-brick status/stop command and if bricks are part of volume then it will show statistics of remove-brick operation otherwise it will show error "Incorrect brick <brick_name> for <volume_name>". Change-Id: I151284ef78c25f52d1b39cdbd71ebfb9eb4b8471 BUG: 1121584 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/9681 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* tests : modifcation in mount-auth-nfs.tJiffin Tony Thottan2015-04-092-67/+65
| | | | | | | | | | | | | In the previous test script, for every change in export/netgroup file the volume is restarted to accodomate those changes. New changes will avoid those restarts. Change-Id: I2a6052075637f8e833096c6b3fcc01139dea85e4 BUG: 1143880 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/10047 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: remove tests for clear-locksJeff Darcy2015-04-093-110/+0
| | | | | | | | | | | | | | | These are suspected of causing core dumps during regression tests, leading to spurious failures. Per email conversation, since this isn't a supported feature anyway, the tests are being removed to facilitate testing of features we do support. Change-Id: I7fd5c76d26dd6c3ffa91f89fc10469ae3a63afdf BUG: 1195415 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/10167 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Support distributed replicated volumes on hot tierDan Lambright2015-04-081-9/+13
| | | | | | | | | | | | | | We did not set up the graph properly for hot tiers with replicated subvolumes. Also add check that the file has not already been moved by another replicated brick on the same node. Change-Id: I9adef565ab60f6774810962d912168b77a6032fa BUG: 1206517 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/10054 Reviewed-by: Joseph Fernandes <josferna@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* tests/bitrot-stub: Object versioning test(s)Venky Shankar2015-04-082-0/+191
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces basic object versioning test(s) which is required for bitrot detection to work correctly. Basic test(s) such as opening a file in read-only mode, single open, multiple open()s are covered on FUSE mount _only_ as stub does not support anonymous fds yet. For this reason, the test case disables open-behind. Actual verification is implemented as a C source which makes use of the same on-disk data structures as used by the stub code. The data structures are moved to separate header file which is included by the test script. Such modularization helps in future enhancements to keep the version "data type" opaque and provide handful of APIs version checking (equal/greater/etc..). [ This is just a start and should grow over time as stub is enhanced and codebase matures. ] Change-Id: Ibee20e65a15b56bbdd59fd2703f9305b115aec7a BUG: 1201724 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/10140 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests: Replace getxattr with getfattrKrutika Dhananjay2015-04-081-2/+2
| | | | | | | | | | | Change-Id: Ibbe97dae51a81c8d5142c53a57fd9c630dfb6f46 BUG: 1191396 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/10153 Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: fix spurious regression in uss.tJeff Darcy2015-04-061-1/+5
| | | | | | | | | | | | | | Sometimes .snaps just doesn't seem to be available right after a mount. I have no idea, but maybe wrapping the next command in an EXPECT_WITHIN will cut down on the spurious test failures. Change-Id: I9bfda9d34e10ff0b783337e700ab8255dc6795ab BUG: 1209286 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/10143 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests: move bug-1168875.t to tests/bugs/snapshot folderAtin Mukherjee2015-04-061-0/+0
| | | | | | | | | Change-Id: Ie4e960002b8de7e31f91365785c44df3ac04c88d BUG: 1178685 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10131 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
generated by cgit (git 2.34.1) at 2024-11-19 11:18:52 +0000