summaryrefslogtreecommitdiffstats
path: root/xlators/cluster/afr/src/afr-self-heal.h
Commit message (Collapse)AuthorAgeFilesLines
* cluster/afr: Fail open on split-brainPranith Kumar K2017-10-261-1/+1
| | | | | | | | | | | | | | | | | Problem: Append on a file with split-brain succeeds. Open is intercepted by open-behind, when write comes on the file, open-behind does open+write. Open succeeds because afr doesn't fail it. Then write succeeds because write-behind intercepts it. Flush is also intercepted by write-behind, so the application never gets to know that the write failed. Fix: Fail open on split-brain, so that when open-behind does open+write open fails which leads to write failure. Application will know about this failure. Change-Id: I4bff1c747c97bb2925d6987f4ced5f1ce75dbc15 BUG: 1294051 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* afr: heal gfid as a part of entry healRavishankar N2017-10-091-0/+4
| | | | | | | | | | | | | | | | | | Problem: If a brick crashes after an entry (file or dir) is created but before gfid is assigned, the good bricks will have pending entry heal xattrs but the heal won't complete because afr_selfheal_recreate_entry() tries to create the entry again and it fails with EEXIST. Fix: We could have fixed posx_mknod/mkdir etc to assign the gfid if the file already exists but the right thing to do seems to be to trigger a lookup on the bad brick and let it heal the gfid instead of winding an mknod/mkdir in the first place. Change-Id: I82f76665a7541f1893ef8d847b78af6466aff1ff BUG: 1493415 Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* afr: auto-resolve split-brains for zero-byte filesRavishankar N2017-09-261-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Problems: As described in BZ 1491670, renaming hardlinks can result in data/mdata split-brain of the DHT link-to files (T files) without any mismatch of data and metadata. As described in BZ 1486063, for a zero-byte file with only dirty bits set, arbiter brick will likely be chosen as the source brick. Fix: For zero byte files in split-brain, pick first brick as a) data source if file size is zero on all bricks. b) metadata source if metadata is the same on all bricks In arbiter case, if file size is zero on all bricks and there are no pending afr xattrs, pick 1st brick as data source. Change-Id: I0270a9a2f97c3b21087e280bb890159b43975e04 BUG: 1491670 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Rahul Hinduja <rhinduja@redhat.com> Reported-by: Mabi <mabi@protonmail.ch>
* afr: discover/lookup heal fixesRavishankar N2017-09-041-2/+2
| | | | | | | | | | | | Addresses review comments in commit 468ca877807625817b72921d1e9585036687b640 Change-Id: I04b1bd3b00abfd6758798d6272954e36a24249a9 BUG: 1473636 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/18187 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: check validity of afr_replyRavishankar N2017-08-311-0/+2
| | | | | | | | | | | | | | | | | ...in various self-heal code paths. Originally found by Pranith in __afr_selfheal_name_impunge () Also change __afr_selfheal_assign_gfid() to send lookup only on those bricks that don't have a gfid matching that of the source. Change-Id: I70a2ccd750a2af92c5fc36e0eefb2b6125404b4a BUG: 1482923 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/18065 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr: heal metadata in discover code pathRavishankar N2017-08-161-0/+4
| | | | | | | | | | | | | | | | | | | | During graph switch, if fuse sends nameless (gfid) lookups, afr takes the discover code path to serve it. If there are pending metadata heals, they do not happen unless an inode refresh happens as a part of discover (which is not guaranteed to happen always). This patch fixes it by attempting metadata heal as a part of discover, just like how it is done in lookup code path. Also removed creating superfluous heal frames when launching heal. Change-Id: I49868649361ebe5d70b6ea150f4686169b6c3070 BUG: 1473636 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/17850 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Karthik U S <ksubrahm@redhat.com>
* cluster/afr: GFID split-brain resolution with existing CLIkarthik-us2017-07-181-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently there is no way for the admin from CLI to resolve gfid split-brain based on some policy like choice of the brick, mtime or size. Fix: With the existing CLI options based on size, mtime, and choice of brick, we do lookup on the parent for the specified file. As part of the lookup, if we find gfid mismatch, we resolve them based on the policy and return. If the file is not in gfid split- brain, then we check for the data and metadata split-brain in the getxattr code path, and resolve if any. This will work provided absolute path to the file with the CLI and not with gfid of the file. Hence the source-brick policy without any file path will also not resolve the gfid split-brain since it uses the gfid of the files. But it can resolve any other type of split-brains and skip the gfid mismatch resolution with the usual error message. Reverting the change https://review.gluster.org/17290. This patch resolves the issue. Fixes gluster/glusterfs#135 Change-Id: Iaeba6fc32f184a34255d03be87cda02773130a09 BUG: 1459530 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/17485 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: GFID split brain resolution with favorite-child-policykarthik-us2017-04-201-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently the automatic split brain resolution with favorite child policy is not resolving the GFID split brains. Fix: When there is a GFID split brain and the favorite child policy is set to size/mtime/ctime/majority, based on the policy decide on the source and sinks. Delete the entry from the sinks and recreate it from the source. Mark the appropriate pending attributes and resolve the GFID split brain. When the heal takes place it will complete the pending heals and reset the attributes. Change-Id: Ie30e5373f94ca6f276745d9c3ad662b8acca6946 BUG: 1430719 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16878 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* syncop: don't wake task in synctask_wake unless really neededRavishankar N2017-03-281-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In EC and AFR, we launch synctasks during self-heal. (i) These tasks usually stackwind a FOP to all its children and call synctask_yield() which does a swapcontext to synctask_switchto() and puts the task in syncenv's waitq by calling __wait(task). This happends as long as the FOP ckbs from all children haven't been received. (ii) For each FOP cbk, we call synctask_wake() which again does a swapcontext to synctask_switchto() which now puts the task in syncenv's runq by calling __run(task). When the task runs and the conext switches back to the FOP path, it puts the task in waitq because we haven't heard from all children as explained in (i). Thus we are unnecessarily using the swapcontext syscalls to just toggle the task back and forth between the waitq and runq. Fix: Store the stackwind count in new variable 'syncbarrier->waitfor' before winding the fop. In each cbk when we call synctask_wake(), perform an actual wake only if the cbk count == stackwind count. Change-Id: Id62d3b6ffed5a8c50f8b79267fb34e9470ba5ed5 BUG: 1434274 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: https://review.gluster.org/16931 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: restore atime/mtime for non-regular filesRavishankar N2017-03-061-0/+9
| | | | | | | | | | | | | | | | | | | AFR restores atime/mtime only as a part of data heal. For non-regular files (dirs, symlinks, char/block/socket files etc) which do not undergo data-heal, atime/mtime is not restored. This patch restores atime/mtime as a part of metadata heal for such files. Change-Id: Id8da885fc93fdf65c2f4bae2af3605b146ac1f16 BUG: 1429198 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16844 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: Perform new entry mark before creating new entryPranith Kumar K2017-02-161-4/+4
| | | | | | | | | | | | | | | | | | | There is a chance for the source brick to go down just after the new entry is created and before source brick is marked with necessary pending markers. If after this any I/O happens then new entry will become source and reverse heal will happen. To prevent this mark the pending xattrs before creating the new entry. BUG: 1417466 Change-Id: I233b87e694d32e5d734df5a83b4d2ca711c17503 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: https://review.gluster.org/16474 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* afr: all children of AFR must be up to resolve s-brainRavishankar N2017-02-091-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | Problem: The various split-brain resolution policies (favorite-child-policy based, CLI based and mount (get/setfattr) based) attempt to resolve split-brain even when not all bricks of replica are up. This can be a problem when say in a replica 3, the only good copy is down and the other 2 bricks are up and blame each other (i.e. split-brain). We end up healing the file in such a case and allow I/O on it. Fix: A decision on whether the file is in split-brain or not must be taken only if we are able to examine the afr xattrs of *all* bricks of a given replica. Change-Id: Icddb1268b380005799990f5379ef957d84639ef9 BUG: 1417522 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16476 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* selfheal: fix memory leak on client side healing queueMateusz Slupny2016-12-021-1/+1
| | | | | | | | | | | | | Change-Id: I2beaba829710565a3246f7449a5cd21755cf5f7d BUG: 1399592 Signed-off-by: Mateusz Slupny <mateusz.slupny@appeartv.com> Reviewed-on: http://review.gluster.org/15968 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* afr: allow I/O when favorite-child-policy is enabledRavishankar N2016-11-271-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently, I/O on a split-brained file fails even when the favorite-child-policy is set until the self-heal is complete. Fix: If a valid 'source' is found using the set favorite-child-policy, inspect and reset the afr pending xattrs on the 'sinks' (inside appropriate locks), refresh the inode and then proceed with the read or write transaction. The resetting itself happens in the self-heal code and hence can also happen in the client side background-heal or by the shd's index-heal in addition to the txn code path explained above. When it happens in via heal, we also add checks in undo-pending to not reset the sink xattrs again. Change-Id: Ic8c1317720cb26bd114b6fe6af4e58c73b864626 BUG: 1386188 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Simon Turcotte-Langevin <simon.turcotte-langevin@ubisoft.com> Reviewed-on: http://review.gluster.org/15673 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr: Automagic unsplit-brain by [ctime|mtime|size|majority]Ravishankar N2016-05-251-0/+1
| | | | | | | | | | | | | | | | | | | | | Introduce cluster.favorite-child-policy which when enabled with [ctime|mtime|size|majority], automatically heals files that are in split-brian. The majority policy will not pick a source if there is no majority. The other three policies pick the first brick with a valid reply and non-zero ctime/mtime/size as source. Change-Id: I3c099a0404082213860f74f2c9b4d207cfaedb76 BUG: 1328224 Original-author: Richard Wareing <rwareing@fb.com> Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/14026 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/afr: Do not inode_link in afrPranith Kumar K2016-05-201-0/+3
| | | | | | | | | | | | | | | | | | Race is explained at https://bugzilla.redhat.com/show_bug.cgi?id=1337405#c0 This patch also handles performing of self-heal with shd-pid. Also performs the healing with this->itable's inode rather than main itable. BUG: 1337405 Change-Id: Id657a6623b71998b027b1dff6af5bbdf8cab09c9 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14422 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* cluster/afr: Entry self-heal performance enhancementsKrutika Dhananjay2016-04-291-2/+3
| | | | | | | | | | | Change-Id: I52da41dff5619492b656c2217f4716a6cdadebe0 BUG: 1269461 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/12442 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Fix partial heals in 3-way replicationPranith Kumar K2016-04-151-1/+12
| | | | | | | | | | | | | | | | | | | | | | Problem: When there are 2 sources and one sink and if two self-heal daemons try to acquire locks at the same time, there is a chance that it gets a lock on one source and sink leading partial to heal. This will need one more heal from the remaining source to sink for the complete self-heal. This is not optimal. Fix: Upgrade non-blocking locks to blocking lock on all the subvolumes, if the number of locks acquired is majority and there were eagains. BUG: 1318751 Change-Id: Iae10b8d3402756c4164b98cc49876056ff7a61e5 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13766 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* cluster/afr: Don't lookup/forget inodesPranith Kumar K2016-03-311-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | Problem: All inodes that are looked-up are always forgotten without fail in afr removing the benefits of them being in lru. This same code can cause crashes if between inode_lookup, inode_forget in afr if the top xlator does inode_forget(0). Fix: Don't use lookup/forget in afr. No benefits are there at the moment for keeping this code. It is impossible to prevent top xlators to do inode_forget(0). Found similar instances in ec and removed them even though those code paths are not going to be executed in any place other than heal-daemon. BUG: 1321554 Change-Id: Ia4cb236178f7f129cc898d53f0bbd26f494a2a8d Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13834 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anuradha Talur <atalur@redhat.com>
* cluster/afr: Choose local child as source if possiblePranith Kumar K2016-03-111-0/+3
| | | | | | | | | | | | | | | | | It is better to choose local brick as source if possible to prevent over the wire read thus saving on bandwidth. Also changed code to not attempt data-heal if 'source' is selected as arbiter. Change-Id: I9a328d0198422280b13a30ab99545370a301dfea BUG: 1314150 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13585 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Krutika Dhananjay <kdhananj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* afr: Add throttled background client-side healsRavishankar N2016-03-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | If a heal is needed after inode refresh (lookup, read_txn), launch it in the background instead of blocking the fop (that triggered refresh) until the heal happens. afr_replies_interpret() is modified such that the heal is launched only if atleast one sink brick is up. Max. no of heals that can happen in parallel is configurable via the 'background-self-heal-count' volume option. Any number greater than that is put in a wait queue whose length is configurable via 'heal-wait-queue-leng' volume option. If the wait queue is also full, further heals will be ignored. Default values: background-self-heal-count=8, heal-wait-queue-leng=128 Change-Id: I1d4a52814cdfd43d90591b6d2ad7b6219937ce70 BUG: 1297172 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13207 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* heal : Changed heal info to process all indices directoriesAnuradha Talur2015-12-021-4/+8
| | | | | | | | | | Change-Id: Ida863844e14309b6526c1b8434273fbf05c410d2 BUG: 1250803 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12658 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr : set pending xattrs for replaced brickAnuradha2015-06-251-0/+8
| | | | | | | | | | | | | | | | | | | | | | This patch is part two change to prevent data loss in a replicate volume on doing a replace-brick commit force operation. Problem: After doing replace-brick commit force, there is a chance that self heal might happen from the replaced (sink) brick rather than the source brick leading to data loss. Solution: Mark pending changelogs on afr children for the replaced afr-child so that heal is performed in the correct direction. Change-Id: Icb9807e49b4c1c4f1dcab115318d9a58ccf95675 BUG: 1207829 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/10448 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* afr: add arbitration supportRavishankar N2015-05-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Add logic in afr to work in conjunction with the arbiter xlator when a replica 3 arbiter volume is created. More specifically, this patch: * Enables full locks for afr data transaction for such volumes. * Removes the upfront marking of pending xattrs at the time of pre-op and defer it to post-op. (This is an arbiter independent change and is made for all afr transactions.) * After pre-op stage, check if we can proceed with the fop stage without ending up in split-brain by examining the changelog xattrs. * Unwinds the fop with failure if only one source was available at the time of pre-op and the fop happened to fail on particular source brick. * Skips data self-heal if arbiter brick is the only source available. * Adds the arbiter-count option to the shd graph. This patch is a part of the arbiter logic implementation for 3 way AFR details of which can be found at http://review.gluster.org/#/c/9656/ Change-Id: I9603db9d04de5626eb2f4d8d959ef5b46113561d BUG: 1199985 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/10258 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: Do not increment healed_count if no healing was performedKrutika Dhananjay2015-03-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: When file modifications are happening while index heal is launched, index healer could pick up entries which appeared in indices/xattrop transiently during the course of the operations on the mount point, and do not really need any heal. This will cause index healer to keep doing index-heal in a loop as long as it finds this entry, by believing that it did successfully heal some gfids even when it didn't. FIX: afr_selfheal() now returns a 1 to indicate that it did not (need to) heal a given gfid. afr_shd_selfheal() will not increment healed_count whenever afr_selfheal() returns a 1. Change-Id: I0d97e11392a032a852e8c6508f691300ef0e5b98 BUG: 1194305 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9713 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: split-brain resolution CLIRavishankar N2015-01-151-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the AFR heal command to include automated split-brain resolution. This patch [3/3] is the final patch for afr automated split-brain resolution implementation. "gluster volume heal <VOLNAME> [full | statistics [heal-count [replica <HOSTNAME:BRICKNAME>]] |info [healed | heal-failed | split-brain]| split-brain {bigger-file <FILE> |source-brick <HOSTNAME:BRICKNAME> [<FILE>]}]" The new additions being: 1.gluster volume heal <VOLNAME> split-brain bigger-file <FILE> Locates the replica containing the FILE, selects bigger-file as source and completes heal. 2.gluster volume heal <VOLNAME> split-brain source-brick <HOSTNAME:BRICKNAME> <FILE> Selects <FILE> present in <HOSTNAME:BRICKNAME> as source and completes heal. 3.gluster volume heal <VOLNAME> split-brain <HOSTNAME:BRICKNAME> Selects all split-brained files in <HOSTNAME:BRICKNAME> as source and completes heal. Note: <FILE> can be either the full file name as seen from the root of the volume (or) the gfid-string representation of the file, which sometimes gets displayed in the heal info command's output. Entry/gfid split-brain resolution is not supported. Example can be found in the test case. Change-Id: I4649733922d406f14f28ee9033a5cb627b9538b3 BUG: 1136769 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9377 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr : Change in volume heal info commandAnuradha2014-12-231-0/+22
| | | | | | | | | | | | | | | | gluster volume heal <volname> info command will now also display if the files listed (in the output of the command) are in split-brain or possibly being healed. This patch also fixes build warning that occurs. Change-Id: I1fc92e62137f23b2b9ddf6e05819cee6230741d1 BUG: 1163804 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/9119 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* heal: glfs-heal implementationPranith Kumar K2014-10-151-0/+7
| | | | | | | | | | | Thanks a lot to Niels for helping me to get build stuff right. Change-Id: I634f24d90cd856ceab3cc0c6e9a91003f443403e BUG: 1147462 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6529 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Add afr-v1 xattr compatibilityPranith Kumar K2014-10-011-3/+12
| | | | | | | | | | | | | All the special cases v1 handles and also self-accusing pending changelog from v1 pre-op also is handled in this patch. Change-Id: Ie10f71633fb20276f01ecafbd728f20483e7029c BUG: 1128721 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8536 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Fix spurious metadata self-healsPranith Kumar K2014-09-241-0/+4
| | | | | | | | | | | | | - Added logging for metadata and data self-heals which helped in debugging this issue. - Added checks to skip self-heals when no sinks are available to heal Change-Id: I0d50dceb84cd9ad4fe00e0b749ddf7d4ff42348a BUG: 1128721 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8709 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Don't start heal when lookup succeeds on < 2 childrenPranith Kumar K2014-09-231-0/+4
| | | | | | | | | | | | | | | | | | | Problem: When self-heal code doesn't see at least 2 successes on looking up children, then self-heal can't be done. What is happening now is if all the lookups fail then the pending changelog is all zeros in xattrs so all the children are becoming sources and leading to crashes when the code paths further assume that some data structures are populated properly Fix: Don't proceed with self-heals when < 2 children succeed lookups. BUG: 1128721 Change-Id: Iffdf0feebb6f98812d9d01cdd0cf97f3e19ba76f Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8698 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: perform list-xattr during lookupRavishankar N2014-09-051-0/+2
| | | | | | | | | | | | | Detect and heal mismatching user extended attributes during lookup. 'Forward' port of http://review.gluster.org/#/c/7444/ Change-Id: Id03c9746f083ffd3014711d0b3a2e5a71a45eed4 BUG: 1134691 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/8558 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr : Mark pending changelog xattrs for new creationsAnuradha2014-09-031-1/+7
| | | | | | | | | | | | | Based on type of file, set appropriate pending changelogs for new entries. Change-Id: Ifd124bf9bc54b996ce83ab9f39d03b3ccca7eb3c BUG: 1130892 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/8555 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: Propagate EIO on inode's type mismatchKrutika Dhananjay2014-09-021-6/+14
| | | | | | | | | | | | | Original author of the test script: Pranith Kumar K <pkarampu@redhat.com> Change-Id: If515ecefd3c17f85f175b6a8cb4b78ce8c916de2 BUG: 1132469 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/8574 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: Fix dict_t leaksKrutika Dhananjay2014-08-281-3/+3
| | | | | | | | | | | | | dict_t objects that are ref'd in alloca'd "replies" in afr_replies_copy() are not unref'd after "replies" go out of scope. Change-Id: Id5a6ca3c17a8de72b94b3e0f92165609da5a36ea BUG: 1134221 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/8553 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Perform gfid heal inside locks.Pranith Kumar K2014-08-221-1/+2
| | | | | | | | | | | | | | | | | Problem: Allowing lookup with 'gfid-req' will lead to assigning gfid at posix layer. When two mounts perform lookup in parallel that can lead to both bricks getting different gfids leading to gfid-mismatch/EIO for the lookup. Fix: Perform gfid heal inside lock. BUG: 1129529 Change-Id: I20c6c5e25ee27eeb906bff2f4c8ad0da18d00090 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8512 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* cluster/afr: refactorAnand Avati2014-03-221-19/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove client side self-healing completely (opendir, openfd, lookup) - Re-work readdir-failover to work reliably in case of NFS - Remove unused/dead lock recovery code - Consistently use xdata in both calls and callbacks in all FOPs - Per-inode event generation, used to force inode ctx refresh - Implement dirty flag support (in place of pending counts) - Eliminate inode ctx structure, use read subvol bits + event_generation - Implement inode ctx refreshing based on event generation - Provide backward compatibility in transactions - remove unused variables and functions - make code more consistent in style and pattern - regularize and clean up inode-write transaction code - regularize and clean up dir-write transaction code - regularize and clean up common FOPs - reorganize transaction framework code - skip setting xattrs in pending dict if nothing is pending - re-write self-healing code using syncops - re-write simpler self-heal-daemon Change-Id: I1e4080c9796c8a2815c2dab4be3073f389d614a8 BUG: 1021686 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6010 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* replicate: don't stop checking xattrs because one was absentJeff Darcy2012-11-261-7/+0
| | | | | | | | | | | | | | | | | | | | | The functional issue is described by the subject line. This patch also addresses several efficiency/structure issues, such as... * Calling dict_set_ptr once for each txn type, instead of once overall. * Calling afr_index_for_transaction_type once per iteration instead of once per call (or better yet zero since the conversion is unnecessary). * Implementation of inner functions in a different file than their one caller, creating a spurious header-file dependency. Change-Id: I29e0df906a820533b66b9ced73e015dfe77267d2 BUG: 865825 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* replicate: add hashed read-child method.Jeff Darcy2012-05-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both the first-to-respond method and the round-robin method are susceptible to clients repeatedly choosing the same servers across a series of opens, creating hot spots. Also, the code to handle a replica being down will ignore both methods and just choose the first remaining (which is not an issue for two-way but can be otherwise). The hashed method more reliably avoids such hot spots. There are three values/modes. 0: use the old (broken) methods. 1: select a read-child based on a hash of the file's GFID, so all clients will choose the same subvolume for a file (ensuring maximum consistency) but will distribute load for a set of files. 2: select a read-child based on a hash of the file's GFID plus the client's PID, so different children will distribute load even for one file. Mode 2 will probably be optimal for most cases. Using response time when we open the file is problematic, both because a single sample might not have been representative even then and because load might have shifted in the hours or days since (for long-lived files). Trying to use more current load information can lead to "herd following" behavior which is just as bad. Pseudo-random distribution is likely to be the best we can reasonably do, just as it is for DHT. Change-Id: I798c2760411eacf32e82a85f03bb7b08a4a49461 BUG: 802513 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.com/2926 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* license: dual license under GPLV2 and LGPLV3+Kaleb KEITHLEY2012-05-101-16/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note that the license was not changed in any of the following: .../argp-standalone/... .../booster/... .../cli/... .../contrib/... .../extras/... .../glusterfsd/... .../glusterfs-hadoop/... .../mod_clusterfs/... .../scheduler/... .../swift/... The license was not changed in any of the non-building xlators. The license was not changed in any of the xlators that seemed — to me — to be clearly server-side only, e.g. protocol/server Note too that copyright was changed along with the license; I did not change the copyright in files where the license did not change. If you find any errors or ommissions please don't hesitate to let me know. The complete list of files with the license change is: libglusterfs/src/byte-order.h libglusterfs/src/call-stub.c libglusterfs/src/call-stub.h libglusterfs/src/checksum.c libglusterfs/src/checksum.h libglusterfs/src/circ-buff.c libglusterfs/src/circ-buff.h libglusterfs/src/common-utils.c libglusterfs/src/common-utils.h libglusterfs/src/compat-errno.c libglusterfs/src/compat-errno.h libglusterfs/src/compat.c libglusterfs/src/compat.h libglusterfs/src/daemon.c libglusterfs/src/daemon.h libglusterfs/src/defaults.c libglusterfs/src/defaults.h libglusterfs/src/dict.c libglusterfs/src/dict.h libglusterfs/src/event-history.c libglusterfs/src/event-history.h libglusterfs/src/event.c libglusterfs/src/event.h libglusterfs/src/fd-lk.c libglusterfs/src/fd-lk.h libglusterfs/src/fd.c libglusterfs/src/fd.h libglusterfs/src/gf-dirent.c libglusterfs/src/gf-dirent.h libglusterfs/src/globals.c libglusterfs/src/globals.h libglusterfs/src/glusterfs.h libglusterfs/src/graph-print.c libglusterfs/src/graph-utils.h libglusterfs/src/graph.c libglusterfs/src/hashfn.c libglusterfs/src/hashfn.h libglusterfs/src/iatt.h libglusterfs/src/inode.c libglusterfs/src/inode.h libglusterfs/src/iobuf.c libglusterfs/src/iobuf.h libglusterfs/src/latency.c libglusterfs/src/latency.h libglusterfs/src/list.h libglusterfs/src/lkowner.h libglusterfs/src/locking.h libglusterfs/src/logging.c libglusterfs/src/logging.h libglusterfs/src/mem-pool.c libglusterfs/src/mem-pool.h libglusterfs/src/mem-types.h libglusterfs/src/options.c libglusterfs/src/options.h libglusterfs/src/rbthash.c libglusterfs/src/rbthash.h libglusterfs/src/run.c libglusterfs/src/run.h libglusterfs/src/scheduler.c libglusterfs/src/scheduler.h libglusterfs/src/stack.c libglusterfs/src/stack.h libglusterfs/src/statedump.c libglusterfs/src/statedump.h libglusterfs/src/syncop.c libglusterfs/src/syncop.h libglusterfs/src/syscall.c libglusterfs/src/syscall.h libglusterfs/src/timer.c libglusterfs/src/timer.h libglusterfs/src/trie.c libglusterfs/src/trie.h libglusterfs/src/xlator.c libglusterfs/src/xlator.h libglusterfsclient/src/libglusterfsclient-dentry.c libglusterfsclient/src/libglusterfsclient-internals.h libglusterfsclient/src/libglusterfsclient.c libglusterfsclient/src/libglusterfsclient.h rpc/rpc-lib/src/auth-glusterfs.c rpc/rpc-lib/src/auth-null.c rpc/rpc-lib/src/auth-unix.c rpc/rpc-lib/src/protocol-common.h rpc/rpc-lib/src/rpc-clnt.c rpc/rpc-lib/src/rpc-clnt.h rpc/rpc-lib/src/rpc-transport.c rpc/rpc-lib/src/rpc-transport.h rpc/rpc-lib/src/rpcsvc-auth.c rpc/rpc-lib/src/rpcsvc-common.h rpc/rpc-lib/src/rpcsvc.c rpc/rpc-lib/src/rpcsvc.h rpc/rpc-lib/src/xdr-common.h rpc/rpc-lib/src/xdr-rpc.c rpc/rpc-lib/src/xdr-rpc.h rpc/rpc-lib/src/xdr-rpcclnt.c rpc/rpc-lib/src/xdr-rpcclnt.h rpc/rpc-transport/rdma/src/name.c rpc/rpc-transport/rdma/src/name.h rpc/rpc-transport/rdma/src/rdma.c rpc/rpc-transport/rdma/src/rdma.h rpc/rpc-transport/socket/src/name.c rpc/rpc-transport/socket/src/name.h rpc/rpc-transport/socket/src/socket.c rpc/rpc-transport/socket/src/socket.h xlators/cluster/afr/src/afr-common.c xlators/cluster/afr/src/afr-dir-read.c xlators/cluster/afr/src/afr-dir-read.h xlators/cluster/afr/src/afr-dir-write.c xlators/cluster/afr/src/afr-dir-write.h xlators/cluster/afr/src/afr-inode-read.c xlators/cluster/afr/src/afr-inode-read.h xlators/cluster/afr/src/afr-inode-write.c xlators/cluster/afr/src/afr-inode-write.h xlators/cluster/afr/src/afr-lk-common.c xlators/cluster/afr/src/afr-mem-types.h xlators/cluster/afr/src/afr-open.c xlators/cluster/afr/src/afr-self-heal-algorithm.c xlators/cluster/afr/src/afr-self-heal-algorithm.h xlators/cluster/afr/src/afr-self-heal-common.c xlators/cluster/afr/src/afr-self-heal-common.h xlators/cluster/afr/src/afr-self-heal-data.c xlators/cluster/afr/src/afr-self-heal-entry.c xlators/cluster/afr/src/afr-self-heal-metadata.c xlators/cluster/afr/src/afr-self-heal.h xlators/cluster/afr/src/afr-self-heald.c xlators/cluster/afr/src/afr-self-heald.h xlators/cluster/afr/src/afr-transaction.c xlators/cluster/afr/src/afr-transaction.h xlators/cluster/afr/src/afr.c xlators/cluster/afr/src/afr.h xlators/cluster/afr/src/pump.c xlators/cluster/afr/src/pump.h xlators/cluster/dht/src/dht-common.c xlators/cluster/dht/src/dht-common.h xlators/cluster/dht/src/dht-diskusage.c xlators/cluster/dht/src/dht-hashfn.c xlators/cluster/dht/src/dht-helper.c xlators/cluster/dht/src/dht-inode-read.c xlators/cluster/dht/src/dht-inode-write.c xlators/cluster/dht/src/dht-layout.c xlators/cluster/dht/src/dht-linkfile.c xlators/cluster/dht/src/dht-mem-types.h xlators/cluster/dht/src/dht-rebalance.c xlators/cluster/dht/src/dht-rename.c xlators/cluster/dht/src/dht-selfheal.c xlators/cluster/dht/src/dht.c xlators/cluster/dht/src/nufa.c xlators/cluster/dht/src/switch.c xlators/cluster/stripe/src/stripe-helpers.c xlators/cluster/stripe/src/stripe-mem-types.h xlators/cluster/stripe/src/stripe.c xlators/cluster/stripe/src/stripe.h xlators/features/index/src/index-mem-types.h ¹ xlators/features/index/src/index.c ¹ xlators/features/index/src/index.h ¹ xlators/performance/io-cache/src/io-cache.c xlators/performance/io-cache/src/io-cache.h xlators/performance/io-cache/src/ioc-inode.c xlators/performance/io-cache/src/ioc-mem-types.h xlators/performance/io-cache/src/page.c xlators/performance/io-threads/src/io-threads.c xlators/performance/io-threads/src/io-threads.h xlators/performance/io-threads/src/iot-mem-types.h xlators/performance/md-cache/src/md-cache-mem-types.h xlators/performance/md-cache/src/md-cache.c xlators/performance/quick-read/src/quick-read-mem-types.h xlators/performance/quick-read/src/quick-read.c xlators/performance/quick-read/src/quick-read.h xlators/performance/read-ahead/src/page.c xlators/performance/read-ahead/src/read-ahead-mem-types.h xlators/performance/read-ahead/src/read-ahead.c xlators/performance/read-ahead/src/read-ahead.h xlators/performance/symlink-cache/src/symlink-cache.c xlators/performance/write-behind/src/write-behind-mem-types.h xlators/performance/write-behind/src/write-behind.c xlators/protocol/auth/addr/src/addr.c ¹ xlators/protocol/auth/login/src/login.c ¹ xlators/protocol/client/src/client-callback.c xlators/protocol/client/src/client-handshake.c xlators/protocol/client/src/client-helpers.c xlators/protocol/client/src/client-lk.c xlators/protocol/client/src/client-mem-types.h xlators/protocol/client/src/client.c xlators/protocol/client/src/client.h xlators/protocol/client/src/client3_1-fops.c ¹ Copyright only, license reverted to original Change-Id: If560e826c61b6b26f8b9af7bed6e4bcbaeba31a8 BUG: 820551 Signed-off-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.com/3304 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* Change Copyright current yearPranith Kumar K2011-08-101-1/+1
| | | | | | | | Change-Id: I2d10f2be44f518f496427f257988f1858e888084 BUG: 3348 Reviewed-on: http://review.gluster.com/200 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* LICENSE: s/GNU Affero General Public/GNU General Public/Pranith Kumar K2011-08-061-3/+3
| | | | | | | | Change-Id: I3914467611e573cccee0d22df93920cf1b2eb79f BUG: 3348 Reviewed-on: http://review.gluster.com/182 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* cluster/afr: Add fresh children along with read-child to inode contextPranith K2011-07-171-4/+1
| | | | | | | | Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2840 (files not getting self-healed when the first child goes down) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2840
* cluster/afr: Handle lookups when self-heal is offPranith K2011-07-121-3/+10
| | | | | | | | Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2586 (read child is set without checking the xattr) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2586
* Copyright changesVijay Bellur2010-10-111-1/+1
| | | | | | | | Signed-off-by: Vijay Bellur <vijay@gluster.com> Signed-off-by: Vijay Bellur <vijay@dev.gluster.com> BUG: 971 (dynamic volume management) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=971
* Change GNU GPL to GNU AGPLPranith K2010-10-041-3/+3
| | | | | | | | Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Signed-off-by: Vijay Bellur <vijay@dev.gluster.com> BUG: 1388 () URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1388
* iatt: changes across the codebaseAnand V. Avati2010-03-161-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - libglusterfs -- call-stub -- inode -- protocol - libglusterfsclient - cluster/replicate - cluster/{dht,nufa,switch} - cluster/unify - cluster/HA - cluster/map - cluster/stripe - debug/error-gen - debug/trace - debug/io-stats - encryption/rot-13 - features/filter - features/locks - features/path-converter - features/quota - features/trash - mount/fuse - performance/io-threads - performance/io-cache - performance/quick-read - performance/read-ahead - performance/stat-prefetch - performance/symlink-cache - performance/write-behind - protocol/client - protocol/server - storage-posix Signed-off-by: Anand V. Avati <avati@blackhole.gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 361 (GlusterFS 3.0 should work on Mac OS/X) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=361
* cluster/afr: Set the self-heal "source" as read subvolume even when not ↵Vikas Gorur2009-12-011-0/+3
| | | | | | | | | | | | | | doing self-heal. This patch sets the read-subvolume equal to the self-heal "source" even if we're not doing self-heal (because some one else is already doing it). Signed-off-by: Vikas Gorur <vikas@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 320 (Improve self-heal performance) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=320
* cluster/afr: Refactored the self-heal interface.Vikas Gorur2009-11-241-3/+1
| | | | | | | | | | Cleaned up the self-heal interface to callers. Signed-off-by: Vikas Gorur <vikas@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 170 (Auto-heal fails on files that are open()-ed/mmap()-ed) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=170
* cluster/afr: Do self-heal on reopened fds.Vikas Gorur2009-11-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | This patch brings in partial support for self-heal of open fds. The precondition is that the fd should have been opened successfully during the initial open() (or create()), and we assume that protocol/client has successfully reopened the fd when the subvolume comes back up. It works by doing an "up/down flush" (a dummy flush transaction to do post-op wherever necessary) and then triggering data self-heal on the file in the post-post-op hook of the dummy flush transaction. This ensures that any writes that come in during self-heal will wait until self-heal completes. The up/down flush is also done when a subvolume goes down, so that post-op is done on all subvolumes where pre-op was done. Signed-off-by: Vikas Gorur <vikas@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 170 (Auto-heal fails on files that are open()-ed/mmap()-ed) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=170
generated by cgit (git 2.34.1) at 2024-11-15 08:21:41 +0000