summaryrefslogtreecommitdiffstats
path: root/xlators/cluster/afr/src
Commit message (Collapse)AuthorAgeFilesLines
...
* selfheal: fix memory leak on client side healing queueMateusz Slupny2016-12-023-3/+8
| | | | | | | | | | | | | Change-Id: I2beaba829710565a3246f7449a5cd21755cf5f7d BUG: 1399592 Signed-off-by: Mateusz Slupny <mateusz.slupny@appeartv.com> Reviewed-on: http://review.gluster.org/15968 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* all: remove dead translatorsJeff Darcy2016-11-293-2559/+2
| | | | | | | | | | | | | | | | | | | | | The following have been completely removed from the source tree, makefiles, configure script, and RPM specfile. cluster/afr/pump cluster/ha cluster/map features/filter features/mac-compat features/path-convertor features/protect Change-Id: I2f966999ac3c180296ff90c1799548fba504f88f Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/15906 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: fix auto-quorumJeff Darcy2016-11-283-49/+31
| | | | | | | | | | | | | | | | | | | | | | | | | (1) afr_have_quorum is dead code. It was copied to afr_has_quorum, and everything else uses that, but the original was never deleted (until now). (2) Auto-quorum should be default for any N>2. Leaving quorum disabled is BAD, but apparently deemed acceptable for N=2 because there's no real quorum in that case. For any larger number (including arbiter configurations) there is such a thing as real quorum and we should use it by default. Note that for N=3 the answers we get from "N % 2" (the old check) and "N > 2" (the new one) are the same. (3) The special case for even N in afr_has_quorum has been simplified and explained more thoroughly in a comment. Change-Id: I48b33c15093512fecf516b26dcf09afecb7ae33b Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/15873 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: Fix the EIO that can occur in afr_inode_refresh as a resultPoornima G2016-11-284-18/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of cache invalidation(upcall). Issue: ------ When a cache invalidation is recieved as a result of changing pending xattr, the read_subvol is reset. Consider the below chain of execution: CHILD_DOWN ... afr_readv ... afr_inode_refresh ... afr_inode_read_subvol_reset <- as a result of pending xattr set by some other client GF_EVENT_UPCALL will be sent afr_refresh_done -> this results in an EIO, as the read subvol was reset by the end of the afr_inode_refresh Solution: --------- When GF_EVENT_UPCALL is recieved, instead of resetting read_subvol, set a variable need_refresh in inode_ctx, the next time some one starts a txn, along with event gen, need_rrefresh also needs to be checked. Change-Id: Ifda21a7a8039b8874215e1afa4bdf20f7d991b58 BUG: 1396952 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15892 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: allow I/O when favorite-child-policy is enabledRavishankar N2016-11-278-61/+387
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently, I/O on a split-brained file fails even when the favorite-child-policy is set until the self-heal is complete. Fix: If a valid 'source' is found using the set favorite-child-policy, inspect and reset the afr pending xattrs on the 'sinks' (inside appropriate locks), refresh the inode and then proceed with the read or write transaction. The resetting itself happens in the self-heal code and hence can also happen in the client side background-heal or by the shd's index-heal in addition to the txn code path explained above. When it happens in via heal, we also add checks in undo-pending to not reset the sink xattrs again. Change-Id: Ic8c1317720cb26bd114b6fe6af4e58c73b864626 BUG: 1386188 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Simon Turcotte-Langevin <simon.turcotte-langevin@ubisoft.com> Reviewed-on: http://review.gluster.org/15673 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: Fix bugs in [f]inodelk/[f]entrylkPranith Kumar K2016-11-265-336/+381
| | | | | | | | | | | | | | | | | | | | | | Problems: 1) Inodelk is not taking quorum into account 2) finodelk, [f]entrylk are not implemented correctly 3) By default afr doesn't go for non-blocking parallel locks. Fix: Implemented a common framework which can be used by [f]inodelk/[f]entrylk. Used quorum for the same. Change-Id: I239f13875a065298630d266941df10cfa3addc85 BUG: 1369077 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15802 Tested-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/afr: Fix deadlock due to compound fopsKrutika Dhananjay2016-11-261-14/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an afr data transaction is eligible for using eager-lock, this information is represented in local->transaction.eager_lock_on. However, if non-blocking inodelk attempt (which is a full lock) fails, AFR falls back to blocking locks which are range locks. At this point, local->transaction.eager_lock[] per brick is reset but local->transaction.eager_lock_on is still true. When AFR decides to compound post-op and unlock, it is after confirming that the transaction did not use eager lock (well, except for a small bug where local->transaction.locks_acquired[] is not considered). But within afr_post_op_unlock_do(), afr again incorrectly sets the lock range to full-lock based on local->transaction.eager_lock_on value. This is a bug and can lead to deadlock since the locks acquired were range locks and a full unlock is being sent leading to unlock failure and thereby every other lock request (be it from SHD or other clients or glfsheal) getting blocked forever and the user perceives a hang. FIX: Unconditionally rely on the range locks in inodelk object for unlocking when using compounded post-op + unlock. Big thanks to Pranith for helping with the debugging. Change-Id: Idb4938f90397fb4bd90921f9ae6ea582042e5c67 BUG: 1398566 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15929 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: Handle rpc errors, xdr failures etc with proper NULL checksKrutika Dhananjay2016-11-241-6/+17
| | | | | | | | | | | Change-Id: Id8ba76ba116d056bc7299dc5ce0980680a5a23f8 BUG: 1398226 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15924 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr,dht,ec: Replace GF_EVENT_CHILD_MODIFIED with event SOME_DESCENDENT_DOWN/UPPoornima G2016-11-211-22/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently these are few events related to child_up/down: GF_EVENT_CHILD_UP : Issued when any of the protocol client connects. GF_EVENT_CHILD_MODIFIED : Issued by afr/dht/ec GF_EVENT_CHILD_DOWN : Issued when any of the protocol client disconnects. These events get modified at the dht/afr/ec layers. Here is a brief on the same. DHT: - All the subvolumes reported once, and atleast one child came up, then GF_EVENT_CHILD_UP is issued - connect GF_EVENT_CHILD_UP is issued - disconnect GF_EVENT_CHILD_MODIFIED is issued - All the subvolumes disconnected, GF_EVENT_CHILD_DOWN is issued AFR: - First subvolume came up, then GF_EVENT_CHILD_UP is issued - Subsequent subvolumes coming up, results in GF_EVENT_CHILD_MODIFIED - Any of the subvolumes go down, then GF_EVENT_SOME_CHILD_DOWN is issued - Last up subvolume goes down, then GF_EVENT_CHILD_DOWN is issued Until the patch [1] introduced GF_EVENT_SOME_CHILD_UP, GF_EVENT_CHILD_MODIFIED was issued by afr/dht when any of the subvolumes go up or down. Now with md-cache changes, there is a necessity to differentiate between child up and down. Hence, introducing GF_EVENT_SOME_DESCENDENT_DOWN/UP and getting rid of GF_EVENT_CHILD_MODIFIED. [1] http://review.gluster.org/12573 Change-Id: I704140b6598f7ec705493251d2dbc4191c965a58 BUG: 1396038 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15764 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* events: Add FMT_WARN for gf_eventPranith Kumar K2016-11-181-1/+4
| | | | | | | | | | | | | | | | | Raghavendra G found that posix is trying to print %s but passing an int when HEALTH_CHECK fails in posix. These are the kind of bugs that should be caught at compilation itself. Also fixed the problematic gf_event() callers. BUG: 1386097 Change-Id: Id7bd6d9a9690237cec3ca1aefa2aac085e8a1270 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15671 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: When failing fop due to lack of quorum, also log error stringKrutika Dhananjay2016-11-091-11/+12
| | | | | | | | | | | | Change-Id: I39de2bcfc660f23a4229a885a0e0420ca949ffc9 BUG: 1392865 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15800 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* features/shard: Fill loc.pargfid too for named lookups on individual shardsKrutika Dhananjay2016-11-081-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a sharded volume when a brick is replaced while IO is going on, named lookup on individual shards as part of read/write was failing with ENOENT on the replaced brick, and as a result AFR initiated name heal in lookup callback. But since pargfid was empty (which is what this patch attempts to fix), the resolution of the shards by protocol/server used to fail and the following pattern of logs was seen: Brick-logs: [2016-11-08 07:41:49.387127] W [MSGID: 115009] [server-resolve.c:566:server_resolve] 0-rep-server: no resolution type for (null) (LOOKUP) [2016-11-08 07:41:49.387157] E [MSGID: 115050] [server-rpc-fops.c:156:server_lookup_cbk] 0-rep-server: 91833: LOOKUP(null) (00000000-0000-0000-0000-000000000000/16d47463-ece5-4b33-9c93-470be918c0f6.82) ==> (Invalid argument) [Invalid argument] Client-logs: [2016-11-08 07:41:27.497687] W [MSGID: 114031] [client-rpc-fops.c:2930:client3_3_lookup_cbk] 2-rep-client-0: remote operation failed. Path: (null) (00000000-0000-0000-0000-000000000000) [Invalid argument] [2016-11-08 07:41:27.497755] W [MSGID: 114031] [client-rpc-fops.c:2930:client3_3_lookup_cbk] 2-rep-client-1: remote operation failed. Path: (null) (00000000-0000-0000-0000-000000000000) [Invalid argument] [2016-11-08 07:41:27.498500] W [MSGID: 114031] [client-rpc-fops.c:2930:client3_3_lookup_cbk] 2-rep-client-2: remote operation failed. Path: (null) (00000000-0000-0000-0000-000000000000) [Invalid argument] [2016-11-08 07:41:27.499680] E [MSGID: 133010] Also, this patch makes AFR by itself choose a non-NULL pargfid even if its ancestors fail to initialize all pargfid placeholders. Change-Id: I5f85b303ede135baaf92e87ec8e09941f5ded6c1 BUG: 1392445 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15788 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* afr,ec: Heal device files with correct major, minor numbersPranith Kumar K2016-10-261-1/+2
| | | | | | | | | | | | | | Thanks a lot to xiaoping.wu@nokia.com from Nokia for the bug and the fix. BUG: 1384297 Change-Id: Ie443237e85d34633b5dd30f85eaa2ac34e45754c Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15728 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* md-cache, afr: Reduce the window of stale readPoornima G2016-10-202-2/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Consider a replica setup, where one mount writes data to a file and the other mount reads the file. In afr, read operations are not transaction based, a brick(read subvolume) is chosen as a part of lookup or other operations, read is always wound only to the read subvolume, even if there was write from a different client that failed on this brick. This stale read continues until there is a lookup or any write operation from the mount point. Currently, this is not a major issue, as a lookup is issued before every read and it will switch the read subvolume to a correct one. But with the plan of increasing md-cache timeout to 600s, the stale read problem will be more pronounced, i.e. stale read can continue for 600s(or more if cascaded with readdirp), as there will be no lookups. Solution: Afr doesn't have any built-in solution for stale read(without affecting the performance). The solution that came up, was to use upcall. When a file on any brick is marked bad for the first time, upcall sends a notification to all the clients that had recently accessed the file. The solution has 2 parts: - Identifying when a file is marked bad, on any of the bricks, for the first time - Client side actions on recieving the notifications Identifying when a file is marked bad on any of the bricks for the first time: ----------------------------------------------------------------------------- The idea is to track xattrop in upcall. xattrop currently comes with 2 afr xattrs - afr dirty bit and afr pending xattrs. Dirty xattr is set to 1 before every write, and is unset if write succeeds. In certain scenarios, dirty xattr can be 0 and still the file could be bad copy. Hence do not track dirty xattr. Pending xattr is set on the good copy, indicating the other bricks that have bad copy. It is still not as simple as, notifying when any of the pending xattrs change. It could lead to flood of notifcations, in case the other brick is completely down or consistantly failing. Hence it is important to notify only once, the first time a good copy is marked bad. Client side actions on recieving pending xattr change, notification: -------------------------------------------------------------------- md-cache will invalidate the cache of that file, so that further lookup is passed down to afr and hence update the read subvolume. Invalidating only in md-cache is not enough, consider the folling oder of opertaions: - pending xattr invalidation - invalidate md-cache - readdirp on the bad read subvolume - fill md-cache - lookup (served from md-cache) - read - wound to the old read subvol. Hence, along with invalidating md-cache, it is very important to reset the read subvolume for that file, in afr. Design Credit: Anuradha Talur, Ravishankar N 1. xattrop doesn't carry info saying post op/pre op. 2. Pre xattrop will have 0 value for all pending xattrs, the cbk of pre xattrop carries the on-disk xattr value. Non zero indicated healing is required. 3. Post xattrop will have non zero value for any of the pending xattrs, if the fop failed on any of the bricks. Change-Id: I469cbc111714c433984fe1c922be2ef113c25804 BUG: 1211863 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15398 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: Prevent dict_set() on NULL dictPranith Kumar K2016-10-151-1/+2
| | | | | | | | | | | | | | | | | In afr lookup when NULL dict is received in lookup, afr is supposed to set all the xattrs it requires in a new dict it creates, but for 'link-count' it is trying to set to the dict that is passed in lookup which can be NULL sometimes. This is leading to error logs. Fixed the same in this patch. BUG: 1385104 Change-Id: I679af89cfc410cbc35557ae0691763a05eb5ed0e Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15646 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* afr: Take full locks in arbiter only for data transactionsRavishankar N2016-10-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Sharding exposed a bug in arbiter config. where `dd` throughput was extremely slow. Shard xlator was sending a fxattrop to update the file size immediately after a writev. Arbiter was incorrectly over-riding the LLONGMAX-1 start offset (for metadata domain locks) for this fxattrop, causing the inodelk to be taken on the data domain. And since the preceeding writev hadn't released the lock (afr does a 'lazy' unlock if write succeeds on all bricks), this degraded to a blocking lock causing extra lock/unlock calls and delays. Fix: Modify flock.l_len and flock.l_start to take full locks only for data transactions. Change-Id: I906895da2f2d16813607e6c906cb4defb21d7c3b BUG: 1384906 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Max Raba <max.raba@comsysto.com> Reviewed-on: http://review.gluster.org/15641 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/ec: Implement heal info with lockAshish Pandey2016-10-111-18/+9
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently heal info command prints all the files/directories if the index for the file/directory is present in .glusterfs/indices folder. After implementing patch http://review.gluster.org/#/c/13733/ indices of the file which is going through update fop will also be present in .glusterfs/indices even if the fop is successful on all the brick. At this time if heal info command is being used, it will also display this file which is actually healthy and does not require any heal. Solution: Take lock on a file corresponding to the indices and inspect xattrs to decide if the file needs heal or not. Change-Id: I6361e2813ece369be12d02e74816df4eddb81cfa BUG: 1366815 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/15543 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* afr: fix incorrect debug log in selfheal pathRavishankar N2016-10-041-2/+2
| | | | | | | | | | | | | | | | | | | 1. While looking at glustershd logs in DEBUG log-level, it was found that all bricks of the replica were printed as local bricks even though they were not. Fixed it. 2. Print the name of the subvol from which the entry was got during index crawl. Change-Id: I08b32e38694c755715e9fe0c0e1dd9212abcfb16 BUG: 1381421 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/15610 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: Implement IPC fopPoornima G2016-09-292-0/+121
| | | | | | | | | | | | | | | | | | | | | Currently ipc() is not implemented in afr. md-cache and upcall uses ipc to register the list of xattrs, [1] for more details. For the ipc op GF_IPC_TARGET_UPCALL, it has to be wound to all the replica subvolumes. ipc() is failed when any of the subvolumes fails with other than ENOTCONN or all of the subvolumes are down. [1] http://review.gluster.org/#/c/15002/ Change-Id: I0f651330eafda64e4d922043fe53bd0014536247 BUG: 1211863 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15378 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: Ignore gluster internal (virtual) xattrs in metadata heal checkRavishankar N2016-09-261-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In arbiter configuration, posix-xlator in the arbiter brick always sets the GF_CONTENT_KEY in the response dict with a value 0. If the file size on the data bricks is more than quick-read's max-file-size (64kb default), those bricks don't set the key. Because of this difference in the no. of dict elements, afr triggers metadata heal in lookup code path, in turn leading to extra lookups+inodelks. Fix: Changed afr dict comparison logic to ignore all virtual xattrs and the on-disk ones that we should not be healing. Also removed is_virtual_xattr() function. The original callers to this function (upcall) don't seem to need it anymore. Change-Id: I05730bdd39d8fb0b9a49a5fc9c0bb01f0d3bb308 BUG: 1378684 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/15548 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: Modifications to afr eventsRavishankar N2016-09-235-8/+14
| | | | | | | | | | | | | | Modified afr event message to add a 'type' key as detailed in the BZ. Also added events for data and metadata split-brain. Change-Id: I8156674b4b6a501499fc10fd68e05115fdaef3e4 BUG: 1378072 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/15550 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-181-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* xlators/afr: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-151-2/+0
| | | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: I4946d460f66d3430bac8910260c0cb1b3e9ff87b Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15513 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* xlators/afr: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-132-6/+0
| | | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: I55d4106ac828380f3315f5a21593390905d3ab3a Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15476 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr: add replication eventsRavishankar N2016-09-064-16/+82
| | | | | | | | | | | | | | | | | | | | | Added the following events for the eventing framework: "EVENT_AFR_QUORUM_MET", --> Sent when quorum is met. "EVENT_AFR_QUORUM_FAIL" -->Sent when quorum is lost. "EVENT_AFR_SUBVOL_UP" -->Sent when afr witnesses the first up subvolume. "EVENT_AFR_SUBVOLS_DOWN"-->Sent when all children of an afr subvol are down. "EVENT_AFR_SPLIT_BRAIN" -->Sent when self-heal detects split-brain in heal path (not read/write path). Change-Id: I937c61ca1ce78b5922ade73c7bfa3051df59c513 BUG: 1371485 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/15349 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr: Consume compound fops in afr transactionAnuradha Talur2016-09-017-64/+535
| | | | | | | | | | | | | Change-Id: Ib06ece3cce1b10d28d6d2953da28444f5c2457ad BUG: 1290304 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15014 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd : Introduce reset brickAnuradha Talur2016-08-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The command basically allows replace brick with src and dst bricks as same. Usage: gluster v reset-brick <volname> <hostname:brick-path> start This command kills the brick to be reset. Once this command is run, admin can do other manual operations that they need to do, like configuring some options for the brick. Once this is done, resetting the brick can be continued with the following options. gluster v reset-brick <vname> <hostname:brick> <hostname:brick> commit {force} Does the job of resetting the brick. 'force' option should be used when the brick already contains volinfo id. Problem: On doing a disk-replacement of a brick in a replicate volume the following 2 scenarios may occur : a) there is a chance that reads are served from this replaced-disk brick, which leads to empty reads. b) potential data loss if next writes succeed only on replaced brick, and heal is done to other bricks from this one. Solution: After disk-replacement, make sure that reset-brick command is run for that brick so that pending markers are set for the brick and it is not chosen as source for reads and heal. But, as of now replace-brick for the same brick-path is not allowed. In order to fix the above mentioned problem, same brick-path replace-brick is needed. With this patch reset-brick commit {force} will be allowed even when source and destination <hostname:brickpath> are identical as long as 1) destination brick is not alive 2) source and destination brick have the same brick uuid and path. Also, the destination brick after replace-brick will use the same port as the source brick. Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de BUG: 1266876 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12250 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-1/+0
| | | | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I98e3308a2548ae095048caa99c86edec15b5e782 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15241 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/ec: Do multi-threaded self-healPranith Kumar K2016-08-241-3/+3
| | | | | | | | | | | BUG: 1368451 Change-Id: I5d6b91d714ad6906dc478a401e614115c89a8fbb Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15083 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: Give option to do consistent-ioPranith Kumar K2016-08-229-41/+229
| | | | | | | | | | | | | | | | | | | | | | | Problem: When tiering/rebalance does migrations and afr with 2-way replica is in picture, migration can read stale data if the source brick goes down and writes to the destination. After this deletion of the file leads to permanent loss of data after migration. Fix: Rebalance/tiering should migrate only when the data is definitely not stale. So introduce an option in afr called consistent-io which will be enabled in migration daemons. BUG: 1306398 Change-Id: I750f65091cc70a3ed4bf3c12f83d0949af43920a Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13425 Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: Prevent split-brain when bricks are brought off and on in ↵Krutika Dhananjay2016-08-225-19/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cyclic order When the bricks are brought offline and then online in cyclic order while writes are in progress on a file, thanks to inode refresh in write txns, AFR will mostly fail the write attempt when the only good copy is offline. However, there is still a remote possibility that the file will run into split-brain if the brick that has the lone good copy goes offline *after* the inode refresh but *before* the write txn completes (I call it in-flight split-brain in the patch for ease of reference), requiring intervention from admin to resolve the split-brain before the IO can resume normally on the file. To get around this, the patch does the following things: i) retains the dirty xattrs on the file ii) avoids marking the last of the good copies as bad (or accused) in case it is the one to go down during the course of a write. iii) fails that particular write with the appropriate errno. This way, we still have one good copy left despite the split-brain situation which when it is back online, will be chosen as source to do the heal. Change-Id: I9ca634b026ac830b172bac076437cc3bf1ae7d8a BUG: 1363721 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15080 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: Bug fixes in txn codepathKrutika Dhananjay2016-08-151-2/+2
| | | | | | | | | | | | | | | | | | AFR sets transaction.pre_op[] array even before actually doing the pre-op on-disk. Therefore, AFR must not only consider the pre_op[] array but also the failed_subvols[] information before setting the pre_op_done[] flag. This patch fixes that. Change-Id: I78ccd39106bd4959441821355a82572659e3affb BUG: 1363721 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15145 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Anuradha Talur <atalur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* libglusterfs: move alloca0 definition to common-utilsRavishankar N2016-08-121-1/+0
| | | | | | | | | | | | | | ...and remove their definitons from EC and AFR. Also `s/alloca+memset0/alloca0` wherever it is used. Change-Id: I3b71e596d12a7d8900f5d761af6b98305c8874d5 BUG: 1366226 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/15147 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: copy loc before passing to syncopPranith Kumar K2016-08-041-1/+2
| | | | | | | | | | | | | | | | | | | | | Problem: When io-threads is enabled on the client side, io-threads destroys the call-stub in which the loc is stored as soon as the c-stack unwinds. Because afr is creating a syncop with the address of loc passed in setxattr by the time syncop tries to access it, io-threads would have already freed the call-stub. This will lead to crash. Fix: Copy loc to frame->local and use it's address. BUG: 1361678 Change-Id: I16987e491e24b0b4e3d868a6968e802e47c77f7a Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15070 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr: some coverity fixesRavishankar N2016-07-267-103/+155
| | | | | | | | | | | | | | | Thanks to Krutika for a cleaner way to track inode refs in afr_set_split_brain_choice(). Change-Id: I2d968d05b815ad764b7e3f8aa9ad95a792b3c1df BUG: 1355604 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/14895 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* dict: Don't expose get_new_dict/dict_destroyPranith Kumar K2016-07-252-4/+4
| | | | | | | | | | | | | | | get_new_dict/dict_destroy is causing confusion where, dict_new/dict_destroy or get_new_dict/dict_unref are used instead of dict_new/dict_unref. Change-Id: I4cc69f5b6711d720823395e20fd624a0c6c1168c BUG: 1296043 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13183 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* afr, index: Clean up stale directory and file indices in granular entry shKrutika Dhananjay2016-07-113-13/+53
| | | | | | | | | | | | | | | | | | | | | | | | Specifically when a directory tree is removed (rm -rf) while a brick is down, both the directory index and the name indices of the files and subdirs under it will remain. Self-heal will need to pick up these and remove them. Towards this, afr sh will now also crawl indices/entry-changes and call an rmdir on the dir if the directory index is stale. On the brick side, rmdir fop has been implemented for index xl, which would delete the directory index and its contents if present in a synctask. Change-Id: I8b527331c2547e6c141db6c57c14055ad1198a7e BUG: 1331323 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14832 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: Fix a minor typo in afr-self-heald.cVijay Bellur2016-07-091-6/+6
| | | | | | | | | | | | s/outout/output/ Change-Id: I2aec770cdae513cd4932e5fd56e0267584e44cae Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/13930 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com>
* afr:Don't wind reads for files in metadata split-brainRavishankar N2016-06-241-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: For a read on a file in metadata split-brain: 1.lookup_done resets event_generation to zero. 2. readv is issued, goes to inode refresh due to mismatching event_gen. 3. After refresh is successful, we update event_generation, data and metdata readable. 3. We then call afr_read_txn_refresh_done() which in turn calls afr_inode_get_readable() but doesn't check for EIO. So afr_readv_wind is called with local->readable (which is populated with data_readable), thus winding the read to a brick. 4. Also, further parallel reads that come directly go to the wind path because there is no inode_refresh needed. Fix: 1.For any afr_read_txn(), readable must be an intersection of data and metadata readable. 2.Check for EIO in afr_read_txn_refresh_done(). Change-Id: I22dd221fdfaf96d7aced2f474e28ed1337d69f0e BUG: 1305031 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13389 Reviewed-by: Ashish Pandey <aspandey@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: Consider ENOSPC and EDQUOT as symmetric errorsRavishankar N2016-06-121-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Since commit 8eaa3506ead4f11b81b146a9e56575c79f3aad7b, in replica 3, if a brick is down and a create fails on the other 2 brick with EDQUOT, we consider it an unsymmetric error and hence do not do post-op. So the dirty xattr remains set on the parent dir, leading to conservative merges during heal when all bricks are up. i.e. a file deleted on the source might re-appear after heal. Fix: Consider ENOSPC and EDQUOT as symmetric errors since there is no possibility of partial inode or entry modification operations possible when quota is enabled. IOW, if quota reports EDQUOT, the no. of bytes written (or not written) will be the same on all bricks of the replica. Likewise, the entry operation (create, mkdir...) will either succeed or not succeed on all bricks. Change-Id: Iacb1108e9ef4a918e36242fb4a957455133744e9 BUG: 1341650 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/14604 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Atin Mukherjee <amukherj@redhat.com>
* afr: afr-pending-xattr fallback checkRavishankar N2016-06-091-31/+63
| | | | | | | | | | | | | | | | | | | | Commit 6e635284a4411b816d4d860a28262c9e6dc4bd6a introduced a comma separated list of values to be used as AFR's pending changelogs. If this xlator option is missing in the volfile, fall back to using client xlator names for constructing the pending changelog names. Also, since the aforementioned commit was reverted from 3.7 and 3.8 branches, introduce GD_OP_VERSION_3_9_0 and change the op-version for this feature to GD_OP_VERSION_3_9_0. Change-Id: I3639b9ab475bd8d9929cc7527d9f4584dee1ad1b BUG: 1285152 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/14642 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* core, shard: Make shards inherit main file's O_DIRECT flag if presentKrutika Dhananjay2016-06-071-1/+2
| | | | | | | | | | | | | | | | | | If the application opens a file with O_DIRECT, the shards' anon fds would also need to inherit the flag. Towards this, shard xl would be passing the odirect flag in the @flags parameter to the WRITEV fop. This will be used in anon fd resolution and subsequent opening by posix xl. Change-Id: Iddb75c9ed14ce5a8c5d2128ad09b749f46e3b0c2 BUG: 1342171 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14191 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/ec: Add/Modify description for eager-lock optionAshish Pandey2016-06-031-4/+5
| | | | | | | | | | | | | | | | | | | This patch provides description for disperse.eager-lock option for disperse volume. It also modifies the description for cluster.eager-lock option to indicate that this option is only for replica volume. Change-Id: Ie73298947fcaaa6aaf825978bc2d27ceaff386d2 BUG: 1327171 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13999 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: Unwind with xdata in inode-write fopsPranith Kumar K2016-06-014-10/+12
| | | | | | | | | | | | | | | When there is a failure afr was not unwinding xdata to xlators above. xdata need not be NULL on failures. So it is important to send it to parent xlators. Change-Id: Ic36aac10a79fa91121961932dd1920cb1c2c3a4c BUG: 1340623 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14567 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/afr: Unwind xdata_rsp even in case of failuresPranith Kumar K2016-05-307-21/+120
| | | | | | | | | | | | | | | | | | | DHT expects GF_PREOP_CHECK_FAILED to be present in xdata_rsp in case of mkdir failures because of stale layout. But AFR was unwinding null xdata_rsp in case of failures. This was leading to mkdir failures just after remove-brick. Unwind the xdata_rsp in case of failures to make sure the response from brick reaches dht. BUG: 1340623 Change-Id: Idd3f7b95730e8ea987b608e892011ff190e181d1 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14553 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* cluster/afr: Fix warning about unused variablePranith Kumar K2016-05-291-1/+0
| | | | | | | | | | | BUG: 1336612 Change-Id: Ife1ce4b11776a303df04321b4a8fc5de745389d6 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14545 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* core: assorted spelling mistakes reported by DebianKaleb S KEITHLEY2016-05-261-1/+1
| | | | | | | | | | | | | | | | | See also > Change-Id: I567a4be8f0f31f6285550f243fe802895f6bc43b Reported-by: Patrick Matthäi <pmatthaei@debian.org> BUG: 1336793 Change-Id: Icb9a6ff94d86663a5bca4ba931d810439c02556e Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14526 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/afr: Attempt name-index purge even on full-heal of directoryKrutika Dhananjay2016-05-261-58/+72
| | | | | | | | | | | Change-Id: Ief71cc68a4fbf8113e15b4254ebcabf7e30f74e2 BUG: 1339181 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14516 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: Automagic unsplit-brain by [ctime|mtime|size|majority]Ravishankar N2016-05-257-22/+356
| | | | | | | | | | | | | | | | | | | | | Introduce cluster.favorite-child-policy which when enabled with [ctime|mtime|size|majority], automatically heals files that are in split-brian. The majority policy will not pick a source if there is no majority. The other three policies pick the first brick with a valid reply and non-zero ctime/mtime/size as source. Change-Id: I3c099a0404082213860f74f2c9b4d207cfaedb76 BUG: 1328224 Original-author: Richard Wareing <rwareing@fb.com> Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/14026 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/afr: Check for required number of entrylksRavishankar N2016-05-241-5/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Parallel rmdir operations on the same directory results in ENOTCONN messages eventhough there was no network disconnect. In blocking entry lock during rmdir, AFR takes 2 set of locks on all its children-One (parentdir,name of dir to be deleted), the other (full lock on the dir being deleted). We proceed to pre-op stage even if only a single lock (but not all the needed locks) was obtained, only to fail it with ENOTCONN because afr_locked_nodes_get() returns zero nodes in afr_changelog_pre_op(). Fix: After we get replies for all blocking lock requests, if we don't have the minimum number of locks to carry out the FOP, unlock and fail the FOP. The op_errno will be that of the last failed reply we got, i.e. whatever is set in afr_lock_cbk(). Change-Id: Ibef25e65b468ebb5ea6ae1f5121a5f1201072293 BUG: 1336381 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/14358 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
generated by cgit (git 2.34.1) at 2025-07-08 16:55:09 +0000