summaryrefslogtreecommitdiffstats
path: root/xlators/cluster
Commit message (Collapse)AuthorAgeFilesLines
...
* TIER: stopping the tierd when the volume goes downhari gowtham2016-03-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | back-port of : http://review.gluster.org/#/c/13646/ If there are large number of files to be migrated and by this time if the volume goes down, then the tierd has to be stopped. But on a huge query file list it keeps checking for each file before stopping. If the volume comes up before the old tierd dies then due to the presence of old tierd new one won't be created. After the old one completes the task, it dies and the status ends up as failed. This patch will check if the status is still running and then let it continue its work. Else it will stop running the tierd. >Change-Id: I6522a4e2919e84bf502b99b13873795b9274f3cd >BUG: 1315659 >Signed-off-by: hari gowtham <hgowtham@redhat.com> >Reviewed-on: http://review.gluster.org/13646 >Tested-by: Dan Lambright <dlambrig@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I8326dbe5edaaea921e5401f39d148aac322c78d0 BUG: 1318498 Signed-off-by: hari <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13756 Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* cluster/ec: Provide an option to enable/disable eager lockAshish Pandey2016-03-203-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: If a fop takes lock, and completes its operation, it waits for 1 second before releasing the lock. However, If ec find any lock contention within this time period, it release the lock immediately before time expires. As we take lock on first brick, for few operations, like read, it might happen that discovery of lock contention might take long time and can degrades the performance. Solution: Provide an option to enable/disable eager lock. If eager lock is disabled, lock will be released as soon as fop completes. gluster v set <VOLUME NAME> disperse.eager-lock on gluster v set <VOLUME NAME> disperse.eager-lock off master- http://review.gluster.org/13605 Change-Id: I000985a787eba3c190fdcd5981dfbf04e64af166 BUG: 1318965 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13773 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/tier: break out of iterating query file once cycle time endsDan Lambright2016-03-161-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | When iterating the query file during migration, tiering should break out of the loop once cycle time completes. Otherwise it may be possible to stay in the loop for a long time. If that happens updates to files will become stale and have not impact migration. This is a backport of 13284 > Change-Id: Ib60cf74bc84e8646e6a0da21ff04954b1b83c414 > BUG: 1301227 > Signed-off-by: Dan Lambright <dlambrig@redhat.com> > Reviewed-on: http://review.gluster.org/13284 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Change-Id: Ia305784b0aa570b70e54f532bf5d68a91b0cf305 BUG: 1318203 Reviewed-on: http://review.gluster.org/13750 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: hari gowtham <hari.gowtham005@gmail.com> Tested-by: Dan Lambright <dlambrig@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* afr: misc performance improvementsRavishankar N2016-03-082-29/+56
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13595/ 1. In afr_getxattr_cbk, consider the errno value before blindly launching an inode refresh and a subsequent retry on other children. 2. We want to accuse small files only when we know for sure that there is no IO happening on that inode. Otherwise, the ia_sizes obtained in the post-inode-refresh replies may mismatch due to a race between inode-refresh and ongoing writes, causing spurious heal launches. Change-Id: I9858485d1061db67353ccf99c59530731649c847 BUG: 1309462 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13644 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/tier: Additional details in error messagesN Balachandran2016-03-071-37/+41
| | | | | | | | | | | | | | | | | | | | | | | | | Added file path/gfid when available to the tier log messages to make debugging easier. > Change-Id: I22dda329367df2b846dcf254594312c997b66083 > BUG: 1273043 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/13114 > Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I5cbf8407fb7c493c4be1dda65c0f722ede33487f BUG: 1311865 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/13518 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Dan Lambright <dlambrig@redhat.com>
* afr: do not set arbiter as a readable subvol in inode contextRavishankar N2016-03-071-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: If afr_lookup_done() or afr_read_subvol_select_by_policy() chooses the arbiter brick to serve the stat() data, file size will be reported as zero from the mount, despite other data bricks being available. This can break programs like tar which use the stat info to decide how much to read. Fix: In the inode-context, mark arbiter as a non-readable subvol for both data and metadata. It it to be noted that by making this fix, we are *not* going to serve metadata FOPS anymore from the arbiter brick despite the brick storing the metadata. It makes sense to do this because the ever increasing over-loaded FOPs (getxattr returning stat data etc.) and compound FOPS in gluster will otherwise make it difficult to add checks in code to handle corner cases. >Change-Id: Ic60b25d77fd05e0897481b7fcb3716d4f2101001 >BUG: 1310171 >Signed-off-by: Ravishankar N <ravishankar@redhat.com> >Reported-by: Mat Clayton <mat@mixcloud.com> >Reviewed-on: http://review.gluster.org/13539 >Reviewed-by: Anuradha Talur <atalur@redhat.com> >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Jeff Darcy <jdarcy@redhat.com> BUG: 1313921 Change-Id: I07fc08d633ca2af48f7354454bc2ab75cedb850a Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13609 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/afr: Move remaining gf_logs to gf_msgsPranith Kumar K2016-03-063-14/+19
| | | | | | | | | | | | | | | | | | | | | >Change-Id: I48d9e5313bd3ccf9fe26c90a7051a8a174d75c49 >BUG: 1296818 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13195 >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Vijay Bellur <vbellur@redhat.com> BUG: 1315142 Change-Id: Iab55c3fd41777e9fe295f674c3ee410fd780b418 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13617 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* Revert "afr: do not set arbiter as a readable subvol in inode context"Pranith Kumar Karampuri2016-03-051-8/+0
| | | | | | | | | | | | This reverts commit ad0b1253b9d74797620c493184818685c024f17c. Change-Id: Id43ba8e75d58325f897e15e3f64f9389236adb40 Reviewed-on: http://review.gluster.org/13608 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* afr: do not set arbiter as a readable subvol in inode contextRavishankar N2016-03-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport-of: http://review.gluster.org/#/c/13539/ Problem: If afr_lookup_done() or afr_read_subvol_select_by_policy() chooses the arbiter brick to serve the stat() data, file size will be reported as zero from the mount, despite other data bricks being available. This can break programs like tar which use the stat info to decide how much to read. Fix: In the inode-context, mark arbiter as a non-readable subvol for both data and metadata. It it to be noted that by making this fix, we are *not* going to serve metadata FOPS anymore from the arbiter brick despite the brick storing the metadata. It makes sense to do this because the ever increasing over-loaded FOPs (getxattr returning stat data etc.) and compound FOPS in gluster will otherwise make it difficult to add checks in code to handle corner cases. Change-Id: Ic60b25d77fd05e0897481b7fcb3716d4f2101001 BUG: 1313921 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Mat Clayton <mat@mixcloud.com> Reviewed-on: http://review.gluster.org/13582 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/ec: Mark self-heal fops as internalPranith Kumar K2016-03-046-10/+12
| | | | | | | | | | | | | | | | | | >Change-Id: I8ae7af266d3e00460f0cfdc9389a926e5f2fee36 >BUG: 1282761 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/12598 >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> BUG: 1283757 Change-Id: Ic20d4ee031265305db1a6ed2cf591ce94b7d0749 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12668 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* tier: Fix unused-but-set-variable warningRaghavendra Talur2016-03-031-2/+0
| | | | | | | | | | | | | Backport of http://review.gluster.org/13591 Change-Id: I20c205849f511acf4797a8a53ea59bfaad60bd35 BUG: 1314548 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/13598 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/ec: Fix invalid config check for directoriesXavier Hernandez2016-03-022-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | The trusted.ec.config xattr is not defined for directories. However sometimes it could be requested because the inode type of a directory can temporarily be IA_INVAL. Requesting such xattr using the xattrop fop when it doesn't exist, returns a config value full of 0's, which is invalid and caused some fops to fail. This patch filters out this case by ignoring config xattr == 0. > Change-Id: Ied51c35b313ea8c3eeae27812f9bae61d3808e92 > Reviewed-on: http://review.gluster.org/13446 > BUG: 1293223 > Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Change-Id: I42d06119d8f51c34ddb910380af7acd670f6244e BUG: 1293224 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/13447 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ashish Pandey <aspandey@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* dht: mkdir must unwind with latest ctimeSakshi Bansal2016-02-292-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently fops like mkdir used the the ctime it gets after creating the directory entry. But setting layout also updates the ctime of a directory. Hence DHT must get the ctime after the setxattr call and unwind with the latest ctime to avoid mismatch in time seen by applications like tar. Backport of http://review.gluster.org/#/c/13352/ > Change-Id: Iecbbe3aac5244af5da9788b48ccf299ca56b4bae > BUG: 1302948 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/13352 > Smoke: Gluster Build System <jenkins@build.gluster.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1312721 Change-Id: Ie09342d3705b40ce98b2935f05ad4402f74ba069 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13536 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/tier: Create linkfiles to hardlinks correctlyN Balachandran2016-02-273-1/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a bug in the way hardlinks are handled in tiered volumes. Ideally, the tier linkto files on the cold tier to files that are hardlinks to each other on the hot tier, should themselves be hardlinks of each other. As they are not, they end up being files with the same gfid but different names for the cold tier dht, and end up overwriting the cached-subvol information stored in the dht inode-ctx. > Change-Id: Ic658a316836e6a1729cfea848b7d212674b0edd2 > BUG: 1305277 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/13391 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> (cherry picked from commit eb362c74db84d95aac07febf0d888bd98b3fb2b9) Change-Id: I5dd98e6d248619147974a630d7d72e1942a1cc83 BUG: 1311836 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/13517 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* cluster/tier : Fixed wrong variable comparisonN Balachandran2016-02-271-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | The wrong variable was being checked to determine the watermark value. > Change-Id: If4c97fa70b772187f1fcbdf5193e077cb356a8b1 > BUG: 1303895 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/13357 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Signed-off-by: N Balachandran <nbalacha@redhat.com> Change-Id: I0a98e0efbc093a727912107038477239e6d85765 BUG: 1306129 Reviewed-on: http://review.gluster.org/13516 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Tested-by: mohammed rafi kc <rkavunga@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* dht: cleanup dict and free memory in rename code pathSakshi Bansal2016-02-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13392/ > Change-Id: I2458e18197bdf7565563a85e9021b5b2850c1825 > BUG: 1303945 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/13392 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1304889 Change-Id: Ibda96769be2bd5b2708066d83363633fd7286929 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13513 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: loc should store proper gfidSakshi Bansal2016-02-231-0/+1
| | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/12574 > Change-Id: Ic1393d44a9ed4aaba23d7c9ddea45977b9dae5e4 > BUG: 1281265 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/12574 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1308410 Change-Id: I6577971f3db139eccf3b8ca3b25e66d292a6a150 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13443 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: file rename must take blocking inode locksSakshi Bansal2016-02-221-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13366 Currently DHT takes non-blocking locks for file rename. Due to this during parallel renames some clients fail with EBUSY or ESTALE errors. Hence to avoid application discontinuity file rename must take blocking inode locks. > Change-Id: I986e9d08b3be359f20b1a3e1564e049b0f3dffd3 > BUG: 1304966 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/13366 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I986e9d08b3be359f20b1a3e1564e049b0f3dffd3 BUG: 1310544 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13481 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* tier/create: store TIER_LINKFILE_GFID in xattr dictionaryMohammed Rafi KC2016-02-221-17/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In tier_create, a new key TIER_LINKFILE_GFID was introduced to avoid a race in stale linkfile deletion. Storing this key in xattr dictionary instead of using local->params dictionary. Because local->params dictionary was also used to create the file before stale linkfile deletion, that leads posix_create to fail, trying to set the added key as extended attributes Back port of> >Change-Id: I24fecb62b47bee65a1e86103925a67d13304c5df >BUG: 1290677 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/13130 >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: N Balachandran <nbalacha@redhat.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I301c159ee51c77d3876e30f216d0375d761eb91e BUG: 1295359 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13410 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* tier/create: Dynamically allocate gfid memoryMohammed Rafi KC2016-02-221-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently we are storing the memory as a static pointer. There is a chance to go that variable in out of scope. So we should allocate in Dynamic way. Backport of> >Change-Id: I096876deb8055ac3a44681599591a0a032bc0c24 >BUG: 1290677 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/13102 >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: N Balachandran <nbalacha@redhat.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: Ibc5cde24db4846ef3152366cdaca81dd1d0e7b21 BUG: 1295359 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13162 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* tier:delete the linkfile if data file creation failsMohammed Rafi KC2016-02-224-82/+288
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we are creating data file in a hot subvolume then we will create a linkfile in cold subvolume. Linkfile creation happens first. If linkfile creation was successful and data file creation failed, then linkfile in cold subvolume will become stale This patch will delete the linkfile as well, if data file creation fails Also this code duplicates dht_create to make tier_create backport of> >Change-Id: I377a90dad47f288e9576c7323b23cf694a91a7a3 >BUG: 1290677 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/12948 >Reviewed-by: N Balachandran <nbalacha@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Raghavendra G <rgowdapp@redhat.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I3689e8ee387fb6731b4b3a7fe8f8190143482eaa BUG: 1295359 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13161 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* tier/unlink: symlink failed to unlinkMohammed Rafi KC2016-02-221-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | during unlink of a file, we will get stat just after deleting the file, to see if the file is under migration or not but this stat call will fail for symlink if the actual file was deleted. So it is better not to send stat request from client if it is a symlink as we are not migrating symlink back port of> >Change-Id: Idc033b24fa3522b5261e579889d2195b43419682 >BUG: 1293963 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/13074 >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: Ic53a9ad29722927f44004d2e7289c807c7485df0 BUG: 1295347 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13159 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* tier:unlink during migrationMohammed Rafi KC2016-02-225-75/+374
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | files deleted during promotion were not deleting as the files are moving from hashed to non-hashed On deleting a file that is undergoing promotion, the unlink call is not sent to the dst file as the hashed subvol == cached subvol. This causes the file to reappear once the migration is complete. This patch also fixes a problem with stale linkfile deleting. Backport of> >Change-Id: I4b02a498218c9d8eeaa4556fa4219e91e7fa71e5 >BUG: 1282390 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/12829 >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> (cherry picked from commit b5de382afa8c5777e455c7a376fc4f1f01d782d1) Change-Id: I951adb4d929926bcd646dd7574f7a2d41d57479d BUG: 1282388 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12991 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* dht: set proper errno when hashed subvol is not foundSakshi Bansal2016-02-211-5/+5
| | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/12559/ > Change-Id: I0c4c72e2f5a9f8a7c60ef65251c596b54de89479 > BUG: 1279705 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/12559 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Susant Palai <spalai@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I0c4c72e2f5a9f8a7c60ef65251c596b54de89479 BUG: 1285829 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13351 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Skip subvols if no layout presentN Balachandran2016-02-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Running "rm -rf" on a tiered volume sometimes caused the client to crash because dht_readdirp_cbk referenced a NULL layout for the hot tier subvol. Now, entries are skipped if the layout is NULL. This can cause "rm -rf" to fail with ENOTEMPTY rmdir failures. > Change-Id: Idd71a9d0f7ee712899cc7113bbf2cd3dcb25808b > BUG: 1307208 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/13440 > Smoke: Gluster Build System <jenkins@build.gluster.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> (cherry picked from commit bfd8f92490454f261330da34565334ed5decd0e1) Change-Id: I34e413d669fdfba343446e84fef5d8e9dd7bd1da BUG: 1308400 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/13441 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/tier : Reset watermarks in tierN Balachandran2016-02-191-9/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | A node which contains only cold bricks and has detected that the high watermark value has been breached on the hot tier will never reset the watermark to the correct value. The promotion check will thus always fail and no promotions will occur from that node. > Change-Id: I0f0804744cd184c263acbea1ee50cd6010a49ec5 > BUG: 1303895 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/13341 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> (cherry picked from commit 545f4ed2c7195a21210e6a055c27c1b7a115e18c) Change-Id: Iba3aa9c57cf5828ab87140c2c8257146a8772836 BUG: 1306129 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/13411 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* cluster/tier: allow db queries to be interruptableDan Lambright2016-02-183-76/+167
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A query to the database may take a long time if the database has many entries. The tier daemon also sends IPC calls to the bricks which can run slowly, espcially in RHEL6. While it is possible to track down each such instance, the snapshot feature should not be affected by database operations. It requires no migration be underway. Therefore it is okay to pause tiering at any time except when DHT is moving a file. This fix implements this strategy by monitoring when control passes to DHT to migrate a file using the GF_XATTR_FILE_MIGRATE_KEY trigger. If it is not, the pause operation is successful. > Change-Id: I21f168b1bd424077ad5f38cf82f794060a1fabf6 > BUG: 1287842 > Signed-off-by: Dan Lambright <dlambrig@redhat.com> > Reviewed-on: http://review.gluster.org/13104 > Reviewed-by: Joseph Fernandes > Tested-by: Gluster Build System <jenkins@build.gluster.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I667e0af24eaa66afefa860c4d73b324e4f39b997 BUG: 1288352 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/13199 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cli/ afr: op_ret for index heal launchRavishankar N2016-02-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13303/ Problem: If index heal is launched when some of the bricks are down, glustershd of that node sends a -1 op_ret to glusterd which eventually propagates it to the CLI. Also, glusterd sometimes sends an err_str and sometimes not (depending on the failure happening in the brick-op phase or commit-op phase). So the message that gets displayed varies in each case: "Launching heal operation to perform index self heal on volume testvol has been unsuccessful" (OR) "Commit failed on <host>. Please check log file for details." Fix: 1. Modify afr_xl_op() to return -1 even if index healing of atleast one brick fails. 2. Ignore glusterd's error string in gf_cli_heal_volume_cbk and print a more meaningful message. The patch also fixes a bug in glusterfs_handle_translator_op() where if we encounter an error in notify of one xlator, we break out of the loop instead of sending the notify to other xlators. Change-Id: I957f6c4b4d0a45453ffd5488e425cab5a3e0acca BUG: 1306922 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13435 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/ec: Never return -ve statePranith Kumar K2016-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | Ec manager shouldn't return -ve states, but it is, fixed that. >Change-Id: I3f97c6ba2dbf9da724e8e1ee9b2c9da73f40013d >BUG: 1300929 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13278 >Tested-by: Xavier Hernandez <xhernandez@datalab.es> >Smoke: Gluster Build System <jenkins@build.gluster.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> BUG: 1305742 Change-Id: I3c0db88b286afca355a8a9ec73589eca57710da6 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13400 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
* tier/gfdb : Round-Robin read of query filesJoseph Fernandes2016-02-143-83/+329
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Each brick on a host will get a separate query file. 2. While reading query record from these query files we read them in a Round-Robin manner. 3. When an error occurs during migration we rename it to query file with an time stamp and .err extension for better debugging. Backport of http://review.gluster.org/13293 > Change-Id: I27c4285d24fd695d2d5cbd9fd7db3879d277ecc8 > BUG: 1302772 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/13293 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Tested-by: N Balachandran <nbalacha@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Change-Id: I9448f19c10a82fff9b1b3c9387c9026adc0742f1 BUG: 1306514 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/13427 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Joseph Fernandes Tested-by: Joseph Fernandes NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* tier/dht : Default value for demote-freq, max files and mbJoseph Fernandes2016-02-142-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Default value for tier-demote-frequency is 3600 sec to avoid frequent demotions. Default value for tier-max-mb is 4000 mb Default value for tier-max-files is 10000 files Backport of http://review.gluster.org/13270 > Change-Id: Ie60951c478a7462c425059699ab82511aa13fa0a > BUG: 1300412 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/13270 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: Ic4458b1b78dc3c6059713f3871e9e2dc8f38b39a BUG: 1306302 Reviewed-on: http://review.gluster.org/13424 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Joseph Fernandes Tested-by: Joseph Fernandes NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* dht/quota : heal the limit_objects_key xattr needed for inode-quotaManikandan Selvaganesh2016-02-101-0/+11
| | | | | | | | | | | | | | | | | | | | | | | Whenever a new brick is added, quota related xattr's should be healed but currently, the xattr "quota.limit-objects.<suffix>" needed for inode-quota is not being healed. The patch fixes this issue. Backport of http://review.gluster.org/#/c/13299/ > Change-Id: I1e7b229126f7b058642bbc3fb5c109bfd8925325 > BUG: 1302257 > Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Change-Id: I22fbbc30fbc0788a7cf80671c1f3e2a80c9e65e8 BUG: 1306138 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/13418 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/ec: Automate heal for replace brickAshish Pandey2016-02-103-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: After a replace brick command, newly added brick does not contain data which existed on old brick. Solution: Do getxattr after initialization of all the bricks. This will trigger heal for brick root as soon as it finds the version mismatch on newly added brick. Removing tests from ec-new-entry.t which were required to simulate automation of heal after replace brick. master - http://review.gluster.org/#/c/13353/ Change-Id: I08e3dfa565374097f6c08856325ea77727437e11 BUG: 1305755 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13353 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13403 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Xavier Hernandez <xhernandez@datalab.es>
* cluster/dht: Cleanup dict in dht_do_rename()v3.7.8Vijay Bellur2016-02-081-0/+2
| | | | | | | | | | | | | Change-Id: Ib4b3a843e78eccf5b8e0e7776cd0128013a59a3e BUG: 1304889 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/13322 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/13358
* Revert "glusterd/afr: store afr pending xattrs as a volume option"Pranith Kumar Karampuri2016-02-081-23/+9
| | | | | | | | | | | | This reverts commit 486b07dfc33782d27e3458659cdd6090f496ad35. Change-Id: I2da12ef77fb01c52cae3c3b5547398b6a4d7d17e BUG: 1293536 Signed-off-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13339 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* Revert "afr: warn if pending xattrs missing during init()"Pranith Kumar Karampuri2016-02-042-17/+1
| | | | | | | | | | | | This reverts commit 101243860bca1bbda8a03ab76f6753ecc10799ed. Change-Id: I042b251250515d703b5bc8bac55e0fc49f2dfc69 BUG: 1293536 Signed-off-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13338 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/afr: Fix heal-info slow response while IO is in progressKrutika Dhananjay2016-02-043-19/+39
| | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/13326/ Now heal-info does an open() on the file being examined so that the client at some point sees open-fd count being > 1 and releases the eager-lock so that heal-info doesn't remain blocked forever until IO completes. Change-Id: I7d4a8aa4de459216408b666894ee7bb42e406547 BUG: 1303899 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13348 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/tier: Ignore quota-deem-statfs for watermark calculationN Balachandran2016-01-311-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | The tier process watermark calculations were incorrect when the quota-deem-statfs option was enabled. We now ignore this while calculating hot tier usage to determine watermark levels. Change-Id: I308bc24432e2fa5ad1d5703e80fc391433538bbb BUG: 1302012 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/13288 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> > Tested-by: mohammed rafi kc <rkavunga@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Dan Lambright <dlambrig@redhat.com> (cherry picked from commit 9ce86c63e349eaafbd923b0b541d75e929ecbae7) Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/13292 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/ec: Create this->itable in all casesPranith Kumar K2016-01-303-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: glfsheal operates based on mount's volfile which doesn't have iamshd flag due to which this->itable is NULL, this leads to "inode not found" logs in glfsheal logs. Fix: Ec only allocates itable with 10 inodes, so allocating this->itable in all cases in init. >Change-Id: I01d3c05e93a17007a4716a2d6f392d2aa306a34b >BUG: 1294743 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13112 >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >(cherry picked from commit 080ddb79d8805253a7f4274606351570faae1add) Change-Id: I4fb624fc26d47128221322da077d04b12add6452 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> BUG: 1302943 Reviewed-on: http://review.gluster.org/13312 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/afr: change data self-heal size check for arbiterPranith Kumar K2016-01-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | Size mismatch should consider that arbiter brick will have zero size file to prevent data self-heal to spuriously trigger/assuming need of self-heals. >Change-Id: I179775d604236b9c8abfa360657abbb36abae829 >BUG: 1285634 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/12755 >Reviewed-by: Ravishankar N <ravishankar@redhat.com> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >(cherry picked from commit 8d2594d77127ba7ea07a0d68afca0939e1817e39) Change-Id: I90243c01d6d83f46475c975a9bd34d9de84b87da BUG: 1283956 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12768 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* dht : changing variable type to avoid overflowSakshi Bansal2016-01-291-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | For layout computation we find total size of the cluster and store it in an unsigned 32 bit variable. For large clusters this value may overflow which leads to wrong computations and for some bricks the layout may overflow. Hence using unsigned 64 bit to handle large values. > Backport of http://review.gluster.org/12597 > Change-Id: I7c3ba26ea2c4158065ea9e74705a7ede1b6759c7 > BUG: 1282751 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/12597 > Reviewed-by: Susant Palai <spalai@redhat.com> > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1294969 Change-Id: Ia66587c6ae4aa3a25b3ac73920b514c1d3c4c2cb Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13127 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/dht : Ftruncate on migrating file fails with EINVALN Balachandran2016-01-299-81/+341
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | What: If dht_open is called on a migrating file after the inode_ctx is set, subsequent FOPs on that fd do not open the fd on the dst subvol. This is seen when the open-ftruncate-close sequence is repeatedly called on a migrating file. A second call to the sequence described above causes dht_truncate_cbk to call dht_truncate2 as the dht_inode_ctx was already set by the first call. As dht_rebalance_in_progress_check is not called, the fd is not opened on the dst subvol. On a distributed-replicate volume, this causes AFR to open the fd using afr_fix_open, but with the wrong flags, causing posix_ftruncate to fail with EINVAL. The fix: We require fd specific information to make a decision while handling migrating files. Set the fd_ctx to indicate the fd has been opened on the dst subvol and check if it has been set while processing Phase1/Phase2 checks in the FOP callback functions. > Change-Id: I43cdcd8017b4a11e18afdd210469de7cd9a5ef14 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/12985 > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I99f8aceec105f16631def06a263f0561954d14b3 BUG: 1293827 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/13071 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* quota: limit xattr for subdir not healed on newly added bricksvmallika2016-01-251-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13100/ DHT after creating missing directory, tries to heal the xattrs. This xattrs operation fails as INTERNAL FOP key was not set > Change-Id: I819d373cf7073da014143d9ada908228ddcd140c > BUG: 1294479 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I30345e919bc9ae882fd0e159c7b03ffc50ed5ef7 BUG: 1294608 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13108 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/dht : Rebalance process crashes due to double fd_unrefN Balachandran2016-01-241-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | The dst_fd was being unrefed twice in case the call to __dht_rebalance_create_dst_file failed. > BUG: 1296611 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/13193 > Reviewed-by: Susant Palai <spalai@redhat.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> > Tested-by: Raghavendra G <rgowdapp@redhat.com> (cherry picked from commit 36fcaf275952202ce3f1e621d3b3a34d58054c99) Change-Id: I56c5aff7fa3827887e67936b8aa1ecbd1a08a9e9 BUG: 1297309 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/13212 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/dht: Handle failure in getxattrSusant Palai2016-01-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently even if we have received xattrs from any one of the subvolume, we unwind with error in case the last subvol (which unwinds) received a negative response. To handle the case check if any of the subvolume has received a response and pass it down. BUG: 1296108 Change-Id: I5279442fabd500934d04509d83ae87fdd69388e2 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/12845 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/13184 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* afr: handle bad objects during lookup/inode_refreshRavishankar N2016-01-211-1/+12
| | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/12955, http://review.gluster.org/#/c/13077/ and http://review.gluster.org/#/c/13185/ If an object (file) is marked bad by bitrot, do not consider the brick on which the object is present as a potential read subvolume for AFR irrespective of the pending xattr values. Also do not consider the brick containing the bad object while performing afr_accuse_smallfiles(). Otherwise if the bad object's size is bigger,we may end up considering that as the source. Change-Id: I4abc68e51e5c43c5adfa56e1c00b46db22c88cf7 BUG: 1293300 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13041 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/ec: Handle non-existent config xattr for non regular filesXavier Hernandez2016-01-191-23/+25
| | | | | | | | | | | | | | | | | | | | | | | | | Since we now try to get the 'trusted.ec.config' xattr for inodes of type IA_INVAL (these inodes will be set to some valid type later), if that inode corresponds to a non regular file, the xattr won't exist and we will handle this as an error when it's not. This patch solves the problem by only considering errors for inodes that are already known to be regular files. > Change-Id: Id72f314e209459236d75cf087fc51e09943756b4 > BUG: 1293223 > Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> > Reviewed-on: http://review.gluster.org/13238 Change-Id: I48a475ce889607e9b909f699b5d7f75b0657cb22 BUG: 1293224 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/13239 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: skip healing data blocks for arbiterRavishankar N2016-01-181-9/+49
| | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/12777 1 ....but still do other parts of data-self-heal like restoring the time and undo pending xattrs. 2. Perform undo_pending inside inodelks. 3. If arbiter is the only sink, do these other parts of data-self-heal inside a single lock-unlock sequence. Change-Id: I64c9d5b594375f852bfb73dee02c66a9a67a7176 BUG: 1286169 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/12778 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* all: reduce "inline" usageKaleb S KEITHLEY2016-01-1812-26/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. backport of Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155, http://review.gluster.org/11769, BUG: 1245331 Change-Id: Iba1efb0bc578ea4a5e9bf76b7bd93dc1be9eba44 BUG: 1283302 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12646 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/ec: Get size and config for invalid inodeAshish Pandey2016-01-131-11/+20
| | | | | | | | | | | | | | | | | | | | | | | Problem: After creating an inode and before linking it to inode table, if there is a request to setattr for that file, it fails and leads to crash. Before linking inode to inode table ia_type is IA_INVAL which will casue have_size and have_config as zero. Solution: Check and get size and config if an inode is invalid master- http://review.gluster.org/#/c/13039/ Change-Id: I0c0e564940b1b9f351369a76ab14f6b4aa81f23b BUG: 1293224 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13066 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-07 22:43:43 +0000