summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd/src/glusterd.h
Commit message (Collapse)AuthorAgeFilesLines
* rdma :mount fails for nfs protocol in rdma volumesJiffin Tony Thottan2015-01-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we mount rdma only volume or tcp,rdma volume using newly peer probed IP's(nfs-server on new nodes) through nfs protocol, mount fails for rdma only volume and mount happens with help of tcp protocol in the case of tcp,rdma volumes. That is for newly added servers will always get transport type as "socket". This is due to nfs_transport_type is exported correctly and imported wrongly. This can be verified by the following , * Create a rdma only volume or tcp,rdma volume * Add a new server into the trusted pool. * Checkout the client transport type specified nfs-server volgraph.It will be always tcp(socket type) instead of rdma. * And also for rdma only volume in the nfs log, we can see 'connection refused' message for every reconnect between nfs server and glusterfsd. Backport of http://review.gluster.org/8975 cherry picked from commit f380e2029d608f97e3ba9a728605e1d798b09e8d >BUG: 1157381 >Change-Id: I6bd4979e31adfc72af92c1da06a332557b6289e2 >Author: Jiffin Tony Thottan <jthottan@redhat.com> >Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> >Reviewed-on: http://review.gluster.org/8975 >Reviewed-by: Meghana M <mmadhusu@redhat.com> >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> >Reviewed-by: Niels de Vos <ndevos@redhat.com> >Tested-by: Niels de Vos <ndevos@redhat.com> Change-Id: I328c17b07e877fe3b29ca832bf6f2291cea16bbe BUG: 1166505 Reviewed-on: http://review.gluster.org/9172 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* glusterd/snapshot: Inherit the mount options of a original brick when ↵Vijaikumar M2014-09-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | creating snapshots. When creating a snapshot a LVM is created at the backend and is mounted under /var/run/gluster/snaps/... However, this mount does not inherit the mount options for the original brick acting as the parent for the snap. If the snap is restored, this could lead to performance degredations, functional limitations, or in extreme scenarios even potential data loss. Change-Id: I67d70fd83430d83dacc5380c6c928e27fb9c9e1b BUG: 1145088 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8394 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8802 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* snapview-server: register a callback with glusterd to getRaghavendra Bhat2014-09-181-0/+3
| | | | | | | | | | | | | | | | | | | notifications * As of now snapview-server is polling (sending rpc requests to glusterd) to get the latest list of snapshots at some regular time intervals (non configurable). Instead of that register a callback with glusterd so that glusterd sends notifications to snapd whenever a snapshot is created/deleted and snapview-server can configure itself. rebase of the patch http://review.gluster.org/#/c/8150/ Change-Id: Iee2582b1a823d50c79233a41cf2106f458b40691 BUG: 1143961 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8767 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep/glusterd: API to check active geo-rep session for the volumeKotresh H R2014-09-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Requirement: Snapshot needs an API to fail the CLI if any geo-rep session is active for that volume. Solution: A function "gd_vol_is_geo_rep_active" is provided to check if any geo-rep session is active for that volume. An in memory dict called 'gsync_running_slaves' is maintained in 'volinfo' structure to keep track of active geo-rep session for the volume. The key 'slavenode::slavevol' with value 'running' is added whenever geo-rep is started/resumed into the dict and the same is removed if stopped/paused. So the 'count' in dict is used to decide whether the geo-rep is active or not for that volume. Also added "this->name" in gf_log in routines which this patch is touched. BUG: 1138952 Change-Id: Ib13aeb509a56edf510651b77e20bf3cc43a3e763 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8459 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/8645 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-09-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | Backport from master branch - http://review.gluster.org/#/c/8246/ - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I06e684ac4c26d1e74c9daf76753403ad15f79276 BUG: 1130308 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8486 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Improvements to peer identificationKaushal M2014-07-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves the peer identification mechanism in glusterd and lays down the framework for further improvements, including better multi network support in glusterd. This patch mainly does two things, 1. Extend the peerinfo object to store a list of addresses instead of a single hostname as it does now. This also includes changes to make the peer update behaviour of 'peer probe' to add to the list. 2. Improve glusterd_friend_find_by_hostname() to perform better matching of hostnames. glusterd_friend_find_by_hostname() now does and initial quick string compare against all the peer addresses known to glusterd, after which it tries a more thorough search using address resolution and matching the struc sockaddr's. The above two changes together improve the peer identification situation in glusterd a lot. More information regarding the problem this patch attempts to resolve and the approach chosen can be found at http://www.gluster.org/community/documentation/index.php/Features/Better_peer_identification This commit is a squashed commit of the following changes, the development branch of which can be viewed at, https://github.com/kshlm/glusterfs/tree/better-peer-identification or, https://forge.gluster.org/~kshlm/glusterfs-core/kshlms-glusterfs/commits/better-peer-identification commit 198f86e60fab74faf082eaa02657a4d8f60b92f0 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 14:34:06 2014 +0530 Update gluster.8 commit 35d597f3a6b3248373e727f7b7e889c92554d56c Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 09:01:01 2014 +0530 Address review comments https://review.gluster.org/#/c/8238/3 commit 47b5331e17304477322bd2daed5bbed503c34ca1 Merge: c71b12c 78128af Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 08:41:39 2014 +0530 Merge branch 'master' into better-peer-identification commit c71b12c164330e8d19d1df4734ab34ef9a8caad2 Merge: 57bc9de 0f5719a Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 19:50:19 2014 +0530 Merge branch 'master' into better-peer-identification commit 57bc9de9e4f49ff2b1620df9906cda50a3527a25 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 19:49:08 2014 +0530 More fixes to review comments commit 5482cc363a687a9e246a0780ec88acd53e218501 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 18:36:40 2014 +0530 Code refactoring in peer-utils based on review comments https://review.gluster.org/#/c/8238/2/xlators/mgmt/glusterd/src/glusterd-peer-utils.c commit 89b22c34757178f64d5fbaffa31e6302f841c060 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 12:30:00 2014 +0530 Hostnames in peer status commit 63ebf9485cf50d736cf640238a1ab241671fcaf1 Merge: c8c8fdd f5f9721 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 12:06:33 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit c8c8fdd2104b5b6b8a1af739b1dd952b74e6dd66 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 18:35:27 2014 +0530 Hostnames in xml output commit 732a92a0167ad7b1d70edbc35ebd8307c2766ae1 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 15:12:10 2014 +0530 Add hostnames to cli rsp dict during list-friends commit fcf43e3e317508f0c225024738a988a4af8e9205 Merge: c0e2624 72d96e2 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 12:53:03 2014 +0530 Merge branch 'master' into better-peer-identification commit c0e262416728a3c536a8347a216e471eb2251535 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 16:11:19 2014 +0530 Use list_for_each_entry_safe when cleaning peer hostnames commit 6132e60224eb592f3657e535a12a3e72c772da42 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 15:52:19 2014 +0530 Fix crash in gd_add_friend_to_dict commit 88ffa9a508fd5aac0b2a76e6e76487ce0cab786a Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 13:19:44 2014 +0530 gd_peerinfo_destroy -> glusterd_peerinfo_destroy commit 4b36930a715b1e13cd1a77d136ef1cf78a06d574 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 12:50:12 2014 +0530 More refactoring commit ee559b081d608c6501c10ae22166f26eeb65690e Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 12:14:40 2014 +0530 Major refactoring of code based on review comments at https://review.gluster.org/#/c/8238/1/xlators/mgmt/glusterd/src/glusterd-peer-utils.h commit e96dbc7bbb05fad2a9c424de41a394b8023fe48d Merge: 2613d1d 83c09b7 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 09:47:05 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 2613d1daebff0c56812de821c06ed4c16bb9d447 Merge: b242cf6 9a50211 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 15:28:57 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit b242cf66d95dd3dd5e3975aa430baa6bd74b8a29 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 15:08:18 2014 +0530 Fix a silly mistake, if (ctx->req) => if (ctx->req == NULL) commit c835ed26433830ceed57289143f596cf60421558 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 14:58:23 2014 +0530 Fix reverse probe. commit 9ede17f9329b854b02e8ad159f173244789fd08c Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 13:31:32 2014 +0530 Fix friend import for existing peers commit 891bf74c7350064dfb008d1b7294bcec28d680fd Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 13:08:36 2014 +0530 Set first hostname in peerinfo->hostnames to peerinfo->hostname commit 9421d6a217381a7427a7d84f369280883ca4297a Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 12:21:40 2014 +0530 Fix gf_asprintf return val check in glusterd_store_peer_write commit defac978c1d94011ce8195e311839b9ffce057e7 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 11:16:13 2014 +0530 Fix store_retrieve_peers to correctly cleanup. commit 00a799f5de1121b0cb7421da8285f9407063e1bd Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 10:52:11 2014 +0530 Update address list in glusterd_probe_cbk only when needed. commit 7a628e8a9c562d85709c69cfa13fb1774c521b75 Merge: d191985 dc46d5e Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 09:24:12 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit d1919858e6639d2b54d716a61f662d9752ec5ff1 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:59:49 2014 +0530 gf_compare_addrinfo -> gf_compare_sockaddr commit 31d8ef730d408f8d9ba8f504fa648f7dcd59da87 Merge: 93bbede 86ee233 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:16:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 93bbedeac5181e29f59b2acd08f638146812ec41 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:15:16 2014 +0530 Improve glusterd_friend_find_by_hostname glusterd_friend_find_by_hostname will now do an initial quick search for the peerinfo performing string comparisions on the given host string. It follows it with a more thorough match, by resolving the addresses and comparing addrinfos instead of strings. commit 2542cdbc45aa9cfcaf1f174686158d5565cdd07b Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 17:21:10 2014 +0530 New utility gf_compare_addrinfo commit 338676e8389a44bd91136eebd110197429c2566c Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 14:55:56 2014 +0530 Use gd_peer_has_address instead of strcmp commit 28d45be51f594328741c44455bd80ac9d64ca501 Merge: 728266e 991dd5e Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 14:54:40 2014 +0530 Merge branch 'master' into better-peer-identification commit 728266eb16d5f5a4bf36266044425ae164337f99 Merge: 7d9b87b 2417de9 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 09:55:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 7d9b87b84955ec17daeaf88a3e7462914039430f Merge: b890625 e02275c Author: Kaushal M <kshlmster@gmail.com> Date: Tue Jul 1 08:41:40 2014 +0530 Merge pull request #4 from vpshastry/better-peer-identification Better peer identification commit e02275c52fb83c72ad082c098fd3e432c2b9c526 Merge: 75ee90d b890625 Author: Varun Shastry <vshastry@redhat.com> Date: Mon Jun 30 16:44:29 2014 +0530 Merge branch 'better-peer-identification' of https://github.com/kshlm/glusterfs into better-peer-identification-kaushal-github commit 75ee90d2f272e49b94d24c9ca4571e89a83055ff Author: Varun Shastry <vshastry@redhat.com> Date: Mon Jun 30 15:36:10 2014 +0530 glusterd: add to the list if the probed uuid pre-exists Signed-off-by: Varun Shastry <vshastry@redhat.com> commit b890625d8164c660695daef3285c67979eef723e Merge: 04c5d60 187a7a9 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jun 30 11:44:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 04c5d60cb938c8d94b214689580b40abb1b0ffcd Merge: 3a5bfa1 e01edb6 Author: Kaushal M <kshlmster@gmail.com> Date: Sat Jun 28 19:23:33 2014 +0530 Merge pull request #3 from vpshastry/better-peer-identification glusterd: search through the list of hostnames in the peerinfo commit 0c64f3346a977f9165ac55a84a1e03c40a7573a7 Merge: e01edb6 3a5bfa1 Author: Varun Shastry <vshastry@redhat.com> Date: Sat Jun 28 10:43:29 2014 +0530 Merge branch 'better-peer-identification' of https://github.com/kshlm/glusterfs into better-peer-identification-kaushal-github commit e01edb63153a1008db70b8fa76ae5b535e099326 Author: Varun Shastry <vshastry@redhat.com> Date: Fri Jun 27 12:29:36 2014 +0530 glusterd: search through the list of hostnames in the peerinfo Signed-off-by: Varun Shastry <vshastry@redhat.com> commit 3a5bfa15855e660db2bfde644727371dd2d618cc Merge: cda6d31 371ea35 Author: Kaushal M <kshlmster@gmail.com> Date: Fri Jun 27 11:31:17 2014 +0530 Merge pull request #1 from vpshastry/better-peer-identification glusterd: Add hostname to list instead of replaceing upon update commit 371ea354f198b4182382d5403c5960c0b2add6b6 Author: Varun Shastry <vshastry@redhat.com> Date: Fri Jun 27 11:24:54 2014 +0530 glusterd: Add hostname to list instead of replaceing upon update Signed-off-by: Varun Shastry <vshastry@redhat.com> commit cda6d3152886623ecbf46baf0048ebe0119b30b6 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 19:52:52 2014 +0530 Import address lists commit 6649b54aa0440130c08e827e0a1d1bbfb840eca9 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 19:15:37 2014 +0530 Implement export address list commit 55990034eead92bc9b936240029e460a4bf152d5 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 18:11:59 2014 +0530 Use first address in list to when setting up the peer RPC. commit a35fde8d19b9988eb04c652fb3a5e4f84d90ad00 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 18:03:04 2014 +0530 Properly free addresses on glusterd_peer_destroy commit 1988081db09ac9205f3dc7268cef8be267f3ce8b Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 17:52:35 2014 +0530 Restore peerinfo with address list implemented. commit 66f524d5749a12f4910dd6b06c9d91f37e1d831e Author: Kaushal M <kaushal@redhat.com> Date: Mon Jun 23 13:02:23 2014 +0530 Move out all peer related utilities from glusterd-utils to glusterd-peer-utils commit 14a2a326a4dff11b55490dca2a14f39320931340 Author: Kaushal M <kaushal@redhat.com> Date: Tue May 27 12:16:41 2014 +0530 Compilation fix commit c59cd351d0a102d0d5f3ea9001fd33c4edcb262f Author: Kaushal M <kaushal@redhat.com> Date: Mon May 5 12:51:11 2014 +0530 Add store support for hostname list commit b70325f0beb884ad12645ef40185f0bf6cedd741 Author: Kaushal M <kaushal@redhat.com> Date: Fri May 2 15:58:07 2014 +0530 Add a hostnames list to glusterd_peerinfo_t glusterd_peerinfo_new will now init this list and add the given hostname as the lists first member. Signed-off-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Varun Shastry <vshastry@redhat.com> Change-Id: Ief3c5d6d6f16571ee2fab0a45e638b9d6506a06e BUG: 1119547 Reviewed-on: http://review.gluster.org/8238 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli/glusterd: Added support for dispersed volumesXavier Hernandez2014-07-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two new options have been added to the 'create' command of the cli interface: disperse [<count>] redundancy <count> Both are optional. A dispersed volume is created by specifying, at least, one of them. If 'disperse' is missing or it's present but '<count>' does not, the number of bricks enumerated in the command line is taken as the disperse count. If 'redundancy' is missing, the lowest optimal value is assumed. A configuration is considered optimal (for most workloads) when the disperse count - redundancy count is a power of 2. If the resulting redundancy is 1, the volume is created normally, but if it's greater than 1, a warning is shown to the user and he/she must answer yes/no to continue volume creation. If there isn't any optimal value for the given number of bricks, a warning is also shown and, if the user accepts, a redundancy of 1 is used. If 'redundancy' is specified and the resulting volume is not optimal, another warning is shown to the user. A distributed-disperse volume can be created using a number of bricks multiple of the disperse count. Change-Id: Iab93efbe78e905cdb91f54f3741599f7ea6645e4 BUG: 1118629 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/7782 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: display snapd status as part of volume statusRaghavendra Bhat2014-06-301-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | * Made changes to save the port used by snapd in the info file for the volume i.e. <glusterd-working-directory>/vols/<volname>/info This is how the gluster volume status of a volume would look like for which the uss feature is enabled. [root@tatooine ~]# gluster volume status vol Status of volume: vol Gluster process Port Online Pid ------------------------------------------------------------------------------ Brick tatooine:/export1/vol 49155 Y 5041 Snapshot Daemon on localhost 49156 Y 5080 NFS Server on localhost 2049 Y 5087 Task Status of Volume vol ------------------------------------------------------------------------------ There are no active volume tasks Change-Id: I8f3e5d7d764a728497c2a5279a07486317bd7c6d BUG: 1111041 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8114 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Fail peer probe/detach commands when peer detach is ongoingKrishnan Parthasarathi2014-06-161-2/+2
| | | | | | | | | | Change-Id: Ifd8099bc235eb395e8fd9ead3197bef71c78042b BUG: 1109812 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/8079 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot: Update file-system uuid during snap creationRajesh Joseph2014-06-121-0/+1
| | | | | | | | | | | | | | | | | | | After the brick snapshot file-system UUID of the origin brick and the snapshot brick will be identical. If user is using file-system UUID to mount the backend bricks then this will result in unexpected behaviour. Fix: After taking the LVM snapshot create new UUID for the snapshot brick. Change-Id: I339c90abd72dd392de195b674ea22217e63dfd48 BUG: 1105484 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/8002 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/snapshot : Store the global snapshot config limit in options.Sachin Pandit2014-06-111-2/+0
| | | | | | | | | | | | | | | | | | | | Problem : Initially we used to save the global config limit in glusterd.info, The problem with that approach was glusterd.info is local to a particular glusterd and hence is not synced during the handshake of glusterds. Solution : Store the global snapshot config in options, which is synced during handshake. Change-Id: I4c688bb4052a57df28aadba8581b14e2ddb510ef BUG: 1104642 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/7971 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Changes to provide interface for USSVarun Shastry2014-06-031-0/+12
| | | | | | | | | | | | | | | The changes which consists of the translators for the USS (User Servicable Snapshots) is submitted as a separate patch. Current patch provides the CLI access to the feature. Change-Id: I6b98a42fcfa82f0870d8048fe0bb53141565e9c6 BUG: 1094815 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/7705 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* mgmt/glusterd: delete oldest snapshot upon exceeding soft-limitRaghavendra Bhat2014-05-081-0/+5
| | | | | | | | | | Change-Id: I2d6ebae3ced1910f2dee43eeb9fc430e9f31073f BUG: 1061685 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/7587 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/snapshot: Don't release big_lock before completing snapshot creationVijaikumar M2014-05-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Releasing the big-lock can cause problem like deadlock or memory corruption. Same happened with bug 1091926 where glusterd on node-2 entered a commit phase and released a big-lock. The originator node received timeout for the commit phase and triggered a post-validate cleanup to the node-2. Now node-2 continued to work with the object that are alreday cleaned-up and resulted in a crash. Solution is to not to release big-lock in the commit phase of snapshot creation. Change-Id: I571194fdb0b0ecc91bd13f2a9fc92fe4338d14dc BUG: 1091926 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/7579 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/snapshot: Add brick-count suffix for the LVM snapshotVijaikumar M2014-05-081-1/+3
| | | | | | | | | | | | | | | | When there are more than one brick created from the same LVM volume group, there will be a conflict with the LVM snapshot name we use. Solution is to add a brick-count suffix to the LVM snapshot name Change-Id: I7258e69fe0b50e86b81c66ab1db523ab3c7cbae0 BUG: 1091934 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/7581 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* mgmt/glusterd: Prevent spurious brick restartsPranith Kumar K2014-05-081-6/+7
| | | | | | | | | Change-Id: I7ee5d18b926d6c31e3e4ea2f5fbe9050c8e1dee8 BUG: 959986 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4954 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* mgmt/glusterd: quorum check before taking the snapshotRaghavendra Bhat2014-05-071-0/+5
| | | | | | | | | | | | | | | | | | | | without force option: quorum fails if glusterds are not in quorum. If glusterd are in quorum, then volume quorum (i.e quorum of the bricks) is checked. volume quorum fails even if one of the bricks are down. with force option: even though the glusterds are not in quorum, and some bricks are down, the quorum check of the volume (i.e bricks) is done and if the volume quorum is met, snapshot is taken. Change-Id: I06971e45d5cf09880032ef038bfe011e6c244268 BUG: 1061685 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/7463 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Fetch brick mount_dirs during brick create.Avra Sengupta2014-05-061-3/+7
| | | | | | | | | | | | | | | | | Fetch the mount directory path for a brick, during volume create, add-brick, and replace-brick. When a snap-create is missed, use this mount directory information to create the brick path for the missed snap brick. Change-Id: Iad3eec96a32cf340f26bdf3f28e2f529e4b77e31 BUG: 1061685 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7550 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd : Volname, brickpath & volfpath length validationAtin Mukherjee2014-05-031-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | While creating a volume and adding a brick validation for _POSIX_PATH_MAX is done on absolute pathname instead of relative pathname due to which a brickpath having less than _POSIX_PATH_MAX may also fail the validation if the directory length is greater than (_POSIX_PATH_MAX -strlen(brickpath/volume name). Also this fix addresses one cli response message correction which says the volume file is too long instead of brick path is too long (when brickpath length validation doesn't fail and vol file length validation fails.) It is also important to note that with the current design of volfile naming, it can not be guranteed that volname and brickpath can have max of _POSIX_PATH_MAX characters. Change-Id: I1283d1f9dea96ae797620002c8723719f26a866d BUG: 1085330 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/7420 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot: Restore cleanupRajesh Joseph2014-05-021-0/+3
| | | | | | | | | | | | | | | If restores fails for some reason then we should revert the restore operation. To do so we take the backup of vols folder before doing a restore and if the restore fails then we revert the changes done. Change-Id: I97f72aec3a34fc122bf137beb336e94db3a04dff BUG: 1061685 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/7548 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot: Activation and De-activation of snapshotJoseph Fernandes2014-05-021-0/+1
| | | | | | | | | | | | | | | | | | | | | Previously, snapshots by default were activated on creation and there was no option to activate or deactivate them on demand. This will allow the user to activate and deactivate on demand. The CLI goes as follows 1) Activate the snap using a command "gluster snapshot activate <snapname> [force]" 2) Deactivate the snap using a command "gluster snapshot deactivate <snapname>" Note: Even now the snapshot will be activated during creation. Change-Id: I0946d800780f26c63fa1fcaf29aabc900140448f BUG: 1061685 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/7476 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot : Copy geo-rep status and config files before taking a ↵Sachin Pandit2014-05-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | snapshot. geo-rep status and conf files needs to be copied before taking a snapshot. The idea here is, when the snapshot is restored, these config and status files needs to be placed back in geo-replication folder so that geo-replication can start with the same state it was when taking a snapshot. Details : Before a snapshot is taken, Copy the status and config files present in /var/lib/glusterd/geo-replication/. The files copied are gsyncd.conf and status files of each session belonging to a volume whose snapshot is about to be taken. Change-Id: I0234ecd846883350c59777c2505290729de0ce05 BUG: 1061685 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/7495 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Ping timer implmentationKrishnan Parthasarathi2014-04-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch refactors the existing client ping timer implementation, and makes use of the common code for implementing both client ping timer and the glusterd ping timer. A new gluster rpc program for ping is introduced. The ping timer is only started for peers that have this new program. The deafult glusterd ping timeout is 30 seconds. It is configurable by setting the option 'ping-timeout' in glusterd.vol . Also, this patch introduces changes in the glusterd-handshake path. The client programs for a peer are now set in the callback of dump_versions, for both the older handshake and the newer op-version handshake. This is the only place in the handshake process where we know what programs a peer supports. Change-Id: I035815ac13449ca47080ecc3253c0a9afbe9016a BUG: 1038261 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5202 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Add a cli command to enable/disable barrierKaushal M2014-04-291-0/+3
| | | | | | | | | | | | | | | This patch adds a new 'gluster volume barrier <VOLNAME> {enable|disable}' cli command. This helps in testing the brick op code path when testing the barrier xlator. This patch can be reverted later if not required for end users. Change-Id: Icd86a2d13e7f276dda1ecbb2593d60638ece7dcd BUG: 1060002 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6958 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Add a barrier brick-opKaushal M2014-04-291-0/+1
| | | | | | | | | | | | | | | | This patch introduces a new 'barrier' brick-op which will be used to activate/deactivate the barriering on the bricks. This includes barriering in the barrier xlator and in the changelog xlator. All the required code has been including a bricks select function, a payload builder and a brick-op handler. Change-Id: I91d9d77f691c2e89823f7dc4e84900ec40dc4dd2 BUG: 1060002 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6943 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot: Perform missed snap deletes and restores.Avra Sengupta2014-04-281-1/+1
| | | | | | | | | | | | | | | | | Replacing is_volume_restored(gf_boolean_t) with restored_from_snap(uuid_t) in glusterd_volinfo_ Also removed gd_restore_snap_volume from glusterd-volgen.c to glusterd-snapshot.c Change-Id: Ic615a1658cfaffa98d4590506ac82f20bf709ad6 BUG: 1089906 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7455 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot: Adding snap_vol_id and snap_uuid to missed_snap_listAvra Sengupta2014-04-271-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Persisting missing snapshot info on disk as well as in memory in the following format: -------------NODE-UUID--------------:--------------SNAP-UUID-------------=---------SNAP-VOL-ID------------:BRICKNUM:-------BRICKPATH--------:OPERATION:STATUS 927cb5fe-63da-48f5-82f6-e6a09ddc81c4:8258b18f-d408-483d-8239-204039dc6397=a17b4fe42c5a45f7a916438643edaa13: 3 :/brick/brick-dirs/brick3: 1 : 1 927cb5fe-63da-48f5-82f6-e6a09ddc81c4:8258b18f-d408-483d-8239-204039dc6397=a17b4fe42c5a45f7a916438643edaa13: 3 :/brick/brick-dirs/brick3: 3 : 1 927cb5fe-63da-48f5-82f6-e6a09ddc81c4:8258b18f-d408-483d-8239-204039dc6397=83a3cc05453b46b2a7eda4c9a9208638: 3 :/brick/brick-dirs/brick3: 1 : 1 This data will be stored on disk at /var/lib/glusterd/snaps/missed_snaps_list In memory we maintain the data as a list of glusterd_missed_snap_info in conf, the key for this list are the first two fields, i.e NODE-UUID:SNAP-UUID. For every NODE-UUID:SNAP-UUID, there can be multiple operations missed on multiple bricks. So we maintain a list of glusterd_snap_op_t for every node of glusterd_missed_snap_info This list is maintained or updated during snapshot create, delete, and restore operations which are the only operations that if missed, are recorded in this list. During snapshot create, if a node is down, or a brick is down, we don't receive their mount point infos. snap_status of such bricks is marked as -1, and their brick details are added to this list. During snapshot delete, we check from originator node, if any other nodes, holding bricks of the said snap are down. Those are also added to the list. Also if the node is up, but the snapshot was pending for a snap brick, and its snap_status is -1, we add that to the list too. When a subsequent delete entry is processed for an already existing create entry, we just mark the create entries status as done (2), and don't add the delete entry to the list. During snapshot restore, we check from originator node, if any other nodes, holding bricks of the said snap are down. Those are also added to the list. Also if the node is up, but the snapshot was pending for a snap brick, and its snap_status is -1, we add that to the list too. Like delete when a subsequent restore entry is processed for an already existing create entry, we just mark the create entries status as done (2), and don't add the restore entry to the list. Change-Id: I54f63e28d3c40555d0f84528f38227103171f594 BUG: 1061685 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7454 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gluster: GlusterFS Volume Snapshot FeatureAvra Sengupta2014-04-111-36/+206
| | | | | | | | | | | | | | | | | | | | | | | | | This is the initial patch for the Snapshot feature. Current patch includes following features: * Snapshot create * Snapshot delete * Snapshot restore * Snapshot list * Snapshot info * Snapshot status * Snapshot config Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9 BUG: 1061685 Signed-off-by: shishir gowda <sgowda@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7128 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: persistent client xlator/ afr changelog namesRavishankar N2014-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | -Add a unique brick-id field to glusterd_brickinfo_t -Persist the id to the brickinfo file -Use the brick-id as the client xlator name during vol create, add-brick and replace-brick operations. -For older volumes,generate the id in-memory during glusterd restore but defer writing it to the brickinfo file until the next volume set operation. -send and receive the brick-ids during peer probe. Feature page: www.gluster.org/community/documentation/index.php/Features/persistent-AFR-changelog-xattributes Related patch: http://review.gluster.org/#/c/7122 Change-Id: Ib7f1570004e33f4144476410eec2b84df4e41448 BUG: 1066778 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/7155 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/Vol-Locks : Moving globals into glusterd priv and code refactoringAvra Sengupta2014-02-141-0/+7
| | | | | | | | | | | | | | | | | | | | | | Moved globals(vol_lock and txn_opinfo dicts and global_txn_id) into glusterd priv Moved glusterd_op_send_cli_response() out of gd_unlock_op_phase as gd_unlock_op_phase and glusterd_clear_txn_opinfo should only be called if the txn id has been successfully generated. The cli resp should be sent irrespective of that. Changed log levels from ERROR to WARNING for some volume lock logs where the logs are expected and is not an error Added logs for better transparency of transaction ids. Change-Id: Ifac9b23aa9f1648c9ae252cfd3ac50bb2ed46728 BUG: 1011470 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/6976 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Volume locks and transaction specific opinfosAvra Sengupta2014-02-101-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch we are replacing the existing cluster-wide lock taken on glusterds across the cluster, with volume locks which are also taken on glusterds across the cluster, but are volume specific. So with the volume locks we are able to perform more than one gluster operation at the same time, as long as the operations are being performed on different volumes. We maintain a global list of volume-locks (using a dict for a list) where the key is the volume name, and which saves the uuid of the originator glusterd. These locks are held and released per volume transaction. In order to acheive multiple gluster operations occuring at the same time, we also separate opinfos in the op-state-machine, as a part of this patch. To do so, we generate a unique transaction-id (uuid) per gluster transaction. An opinfo is then associated with this transaction id, which is used throughout the transaction. We maintain a run-time global list(using a dict) of transaction-ids, and their respective opinfos to achieve this. Upstream Feature Page: http://www.gluster.org/community/documentation/index.php/Features/glusterd-volume-locks Change-Id: Iaad505a854bac8de8f83beec0357eb6cde3f7ea8 BUG: 1011470 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5994 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Relocate rebalance sockfileKaushal M2014-01-101-2/+9
| | | | | | | | | | | | | | | | | | | | | | | The defrag sockfile was moved from priv->workdir to DEFAULT_VAR_RUN_DIRECTORY. The format for the new path of the defrag sockfile is 'DEFAULT_VAR_RUN_DIRECTORY/gluster-rebalance-<vol-id>.sock'. This was needed because the earlier location didn't have a fixed length and could exceed UNIX_PATH_MAX characters. This could lead to the rebalance process failing to start as the socket file could not be created. Also, for keeping backward compatiblity, glusterd_rebalance_rpc_create will try both the new and old sockfile locations when attempting reconnection. Change-Id: I6740ea665de84ebce1ef7199c412f426de54e3d0 BUG: 1049726 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6616 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: make volinfo a refcnt'ed object.Krishnan Parthasarathi2013-12-201-0/+2
| | | | | | | | | | | | | Add glusterd_volinfo_remove(..) which removes @volinfo from the list of volumes in the cluster and performs an unref on @volinfo Change-Id: I5f546ca58f61bc334ab1bab4c51c4a21e1f66161 BUG: 1038051 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6521 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/geo-rep: more glusterd and cli fixes for geo-rep.Ajeet Jha2013-12-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | -> handle option validation cases in reset case. -> Creating valid conf path when glusterd restarts. -> Reading the gsyncd worker thread status and displaying it. -> Displaying status-detail per worker. -> Fetch checkpoint info in geo-rep status. -> use-tarssh value validation added. misc: misc geo-rep fixes based on cluster, logrotate etc.. -> cluster/dht: fix 'stime' getxattr getting overwritten. -> cluster/afr: return max of 'stime' values in subvol. -> geo-rep-logrotate: Sending SIGHUP to geo-rep auxiliary. -> cluster/dht: fix convoluted logic while aggregating. -> cluster/*: fix 'stime' min/max fetch logic. Change-Id: I811acea0bbd6194797a3e55d89295d1ea021ac85 BUG: 1036552 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/6405 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: create rpc obj for rebalance only if absentKrishnan Parthasarathi2013-12-041-2/+1
| | | | | | | | | Change-Id: Iff305023577ff92a8f43f24dafcf201f86805769 BUG: 1038051 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6423 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli, glusterd: More quota fixes ...Krutika Dhananjay2013-11-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... which may be grouped under the following categories: 1. Fix incorrect cli exit status for 'quota list' cmd 2. Print appropriate error message on quota parse errors in cli Authored by: Anuradha Talur <atalur@redhat.com> 3. glusterd: Improve quota validation during stage-op 4. Fix peer probe issues resulting from quota conf checksum mismatches 5. Enhancements to CLI output in the event of quota command failures Authored by: Kaushal Madappa <kmadappa@redhat.com> 7. Move aux mount location from /tmp to /var/run/gluster Authored by: Krishnan Parthasarathi <kparthas@redhat.com> 8. Fix performance issues in quota limit-usage Authored by: Krutika Dhananjay <kdhananj@redhat.com> Note: Some functions that were used in earlier version of quota, that aren't called anymore have been removed. Change-Id: I9d874f839ae5fdcfbe6d4f2d727eac091f27ac57 BUG: 969461 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6366 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: Changes to quota command Quota featureRaghavendra G2013-11-261-41/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | re-work. Following are the cli commands that are new/re-worked: ====================================================== volume quota <VOLNAME> {enable|disable|list [<path> ...]|remove <path>| default-soft-limit <percent>} | volume quota <VOLNAME> {limit-usage <path> <size> [<percent>]} | volume quota <VOLNAME> {alert-time|soft-timeout|hard-timeout} {<time>} volume status [all | <VOLNAME> [nfs|shd|<BRICK>|quotad]] [detail|clients|mem|inode|fd|callpool] volume statedump <VOLNAME> [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history] glusterd changes: ================= * Quota limits are now set as extended attributes by glusterd from the aux mount created by the cli. * The gfids of the directories on which quota limits are set for a given volume are stored in /var/lib/glusterd/vols/<volname>/quota.conf file in binary format, and whose cksum and version is stored in /var/lib/glusterd/vols/<volname>/quota.cksum. Original-author: Krutika Dhananjay <kdhananj@redhat.com> Original-author: Krishnan Parthasarathi <kparthas@redhat.com> BUG: 969461 Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6003 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* bd: Add Zerofill FOP supportM. Mohan Kumar2013-11-201-0/+1
| | | | | | | | | | BUG: 1028673 Change-Id: I9ba8e3e6cf2f888640b4d2a2eb934a27ff903c42 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/6290 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* bd: Add support to create clone, snapshot and merge of LV images.M. Mohan Kumar2013-11-131-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Special xattr names "clone" & "snapshot" can be used to create full and linked clone of the LV images. GFID of destination posix file (to be mapped) is passed as a value to the xattr. Destination posix file must exist before running this operation. These operations form a basis for offloading storage related operations from QEMU to GlusterFS. Syntax for full clone: xattr name: "clone" value: "gfid-of-dest-file" Syntax for linked clone: xattr name: "snapshot" value: "gfid-of-dest-file" Syntax for merging: xattr name: "merge" value: "path-to-snapshot-file" Example: setfattr -n clone -v <gfid-of-dest-file> /media/source setfattr -n snapshot -v <gfid-of-dest-file> /media/source setfattr -n merge -v "/media/sn" /media/sn Change-Id: Id9f984a709d4c2e52a64ae75bb12a8ecb01f8776 BUG: 1028672 Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5626 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* bd: posix/multi-brick support to BD xlatorM. Mohan Kumar2013-11-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current BD xlator (block backend) has a few limitations such as * Creation of directories not supported * Supports only single brick * Does not use extended attributes (and client gfid) like posix xlator * Creation of special files (symbolic links, device nodes etc) not supported Basic limitation of not allowing directory creation is blocking oVirt/VDSM to consume BD xlator as part of Gluster domain since VDSM creates multi-level directories when GlusterFS is used as storage backend for storing VM images. To overcome these limitations a new BD xlator with following improvements is suggested. * New hybrid BD xlator that handles both regular files and block device files * The volume will have both POSIX and BD bricks. Regular files are created on POSIX bricks, block devices are created on the BD brick (VG) * BD xlator leverages exiting POSIX xlator for most POSIX calls and hence sits above the POSIX xlator * Block device file is differentiated from regular file by an extended attribute * The xattr 'user.glusterfs.bd' (BD_XATTR) plays a role in mapping a posix file to Logical Volume (LV). * When a client sends a request to set BD_XATTR on a posix file, a new LV is created and mapped to posix file. So every block device will have a representative file in POSIX brick with 'user.glusterfs.bd' (BD_XATTR) set. * Here after all operations on this file results in LV related operations. For example opening a file that has BD_XATTR set results in opening the LV block device, reading results in reading the corresponding LV block device. When BD xlator gets request to set BD_XATTR via setxattr call, it creates a LV and information about this LV is placed in the xattr of the posix file. xattr "user.glusterfs.bd" used to identify that posix file is mapped to BD. Usage: Server side: [root@host1 ~]# gluster volume create bdvol host1:/storage/vg1_info?vg1 host2:/storage/vg2_info?vg2 It creates a distributed gluster volume 'bdvol' with Volume Group vg1 using posix brick /storage/vg1_info in host1 and Volume Group vg2 using /storage/vg2_info in host2. [root@host1 ~]# gluster volume start bdvol Client side: [root@node ~]# mount -t glusterfs host1:/bdvol /media [root@node ~]# touch /media/posix It creates regular posix file 'posix' in either host1:/vg1 or host2:/vg2 brick [root@node ~]# mkdir /media/image [root@node ~]# touch /media/image/lv1 It also creates regular posix file 'lv1' in either host1:/vg1 or host2:/vg2 brick [root@node ~]# setfattr -n "user.glusterfs.bd" -v "lv" /media/image/lv1 [root@node ~]# Above setxattr results in creating a new LV in corresponding brick's VG and it sets 'user.glusterfs.bd' with value 'lv:<default-extent-size' [root@node ~]# truncate -s5G /media/image/lv1 It results in resizig LV 'lv1'to 5G New BD xlator code is placed in xlators/storage/bd directory. Also add volume-uuid to the VG so that same VG can't be used for other bricks/volumes. After deleting a gluster volume, one has to manually remove the associated tag using vgchange <vg-name> --deltag <trusted.glusterfs.volume-id:<volume-id>> Changes from previous version V5: * Removed support for delayed deleting of LVs Changes from previous version V4: * Consolidated the patches * Removed usage of BD_XATTR_SIZE and consolidated it in BD_XATTR. Changes from previous version V3: * Added support in FUSE to support full/linked clone * Added support to merge snapshots and provide information about origin * bd_map xlator removed * iatt structure used in inode_ctx. iatt is cached and updated during fsync/flush * aio support * Type and capabilities of volume are exported through getxattr Changes from version 2: * Used inode_context for caching BD size and to check if loc/fd is BD or not. * Added GlusterFS server offloaded copy and snapshot through setfattr FOP. As part of this libgfapi is modified. * BD xlator supports stripe * During unlinking if a LV file is already opened, its added to delete list and bd_del_thread tries to delete from this list when a last reference to that file is closed. Changes from previous version: * gfid is used as name of LV * ? is used to specify VG name for creating BD volume in volume create, add-brick. gluster volume create volname host:/path?vg * open-behind issue is fixed * A replicate brick can be added dynamically and LVs from source brick are replicated to destination brick * A distribute brick can be added dynamically and rebalance operation distributes existing LVs/files to the new brick * Thin provisioning support added. * bd_map xlator support retained * setfattr -n user.glusterfs.bd -v "lv" creates a regular LV and setfattr -n user.glusterfs.bd -v "thin" creates thin LV * Capability and backend information added to gluster volume info (and --xml) so that management tools can exploit BD xlator. * tracing support for bd xlator added TODO: * Add support to display snapshots for a given LV * Display posix filename for list-origin instead of gfid Change-Id: I00d32dfbab3b7c806e0841515c86c3aa519332f2 BUG: 1028672 Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/4809 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* bd_map: Remove bd_map xlatorM. Mohan Kumar2013-11-131-8/+0
| | | | | | | | | | | Remove bd_map xlator and CLI related changes. Change-Id: If7086205df1907127c1a1fa4ba603f1c48421d09 BUG: 1028672 Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5747 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* mgmt/glusterd: add option to specify a different base-portKaleb S. KEITHLEY2013-10-311-99/+100
| | | | | | | | | | | | | | | | | | This is (arguably) a hack to work around a bug in libvirt which is not well behaved wrt to using TCP ports in the unreserved space between 49152-65535. (See RFC 6335) Normally glusterd starts and binds to the first available port in range, usually 49152. libvirt's live migration also tries to use ports in this range, but has no fallback to use (an)other port(s) when the one it wants is already in use. Change-Id: Id8fe35c08b6ce4f268d46804bbb6dddab7a6b7bb BUG: 1018178 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/6210 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Changes to cli-glusterd communicationKaushal M2013-10-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Glusterd changes: With this patch, glusterd creates a socket file in DATADIR/run/glusterd.socket , and listen on it for cli requests. It listens for 2 rpc programs on the socket file, - The glusterd cli rpc program, for all cli commands - A reduced glusterd handshake program, just for the 'system:: getspec' command The location of the socket file can be changed with the glusterd option 'glusterd-sockfile'. To retain compatibility with the '--remote-host' cli option, glusterd also listens for the cli requests on port 24007. But, for the sake of security, it listens using a reduced cli rpc program on the port. The reduced rpc program only contains read-only procs used for 'volume (info|list|status)', 'peer status' and 'system:: getwd' cli commands. CLI changes: The gluster cli now uses the glusterd socket file for communicating with glusterd by default. A new option '--gluster-sock' has been added to allow specifying the sockfile used to connect. Using the '--remote-host' option will make cli connect to the given host & port. Tests changes: cluster.rc has been modified to make use of socket files and use different log files for each glusterd. Some of the tests using cluster.rc have been fixed. Change-Id: Iaf24bc22f42f8014a5fa300ce37c7fc9b1b92b53 BUG: 980754 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5280 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Validating invalid log-level under geo-rep config options.Ajeet Jha2013-10-031-3/+4
| | | | | | | | | | | Change-Id: I8ff6b48ef41fd6e9ea68c42dfb9878f8a08ed627 BUG: 1010874 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/5989 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* logging: Remove multiple definitions of DEFAULT_LOG_FILE_DIRECTORYVijay Bellur2013-09-241-1/+0
| | | | | | | | | Change-Id: I8d670a228d3c1282aa7d70b151f166d04abc40e5 BUG: 764890 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/5909 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* glusterd : Blocking invalid values for geo-rep config optionsAvra Sengupta2013-09-171-0/+7
| | | | | | | | | | | Change-Id: Ia9ee44763a9c2798b26d3225bf03a974d7ece21f BUG: 998962 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5666 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli,glusterd: Task parameters in xml outputKaushal M2013-09-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces task parameters for the asynchronus task shown in volume status. The parameters are only given for xml output. The parameters shown currently are, - source and destination bricks for replace-brick tasks ...... <tasks> <task> <type>Replace brick</type> <id>3d1a1005-9d2e-4ae0-bd62-577bc1d333a3</id> <status>1</status> <params> <srcBrick>archm:/export/test4</srcBrick> <dstBrick>archm:/export/test-replace1</dstBrick> </params> </task> </tasks> ...... - list of bricks being removed for remove-brick tasks ...... <tasks> <task> <type>Remove brick</type> <id>901c20ca-0da2-41de-8669-5f0caca6b846</id> <status>1</status> <params> <brick>archm:/export/test2</brick> <brick>archm:/export/test3</brick> </params> </task> </tasks> ...... The changes for non-xml output will be done in a subsequent patch. Change-Id: I322afe2f83ed8adeddb99f7962c25911204dc204 BUG: 916577 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5771 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/gverify: Check for passwordless ssh in gverify.Venky Shankar2013-09-041-0/+3
| | | | | | | | | | Change-Id: I8c2d398114ad4534bcc052f9a5be8bbb2e7e2582 BUG: 999531 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/5677 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: Treat migration failures due to space constraints as skippedshishir gowda2013-07-301-0/+1
| | | | | | | | | | | | | | | | Currently rebalance/remove-brick op's display migration failed count even for files which failed due to space issues (not enough space for file, or migration leading to cluster imbalance) These will now be counted as skipped, and rebalance/remove-brick status will display the additional counter Change-Id: I674904d380b5f8300e9ca9e6af557c3d30d6cff4 BUG: 989846 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5399 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/cli changes for distributed geo-repAvra Sengupta2013-07-261-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commands: gluster system:: execute gsec_create gluster volume geo-rep <master> <slave-url> create [push-pem] [force] gluster volume geo-rep <master> <slave-url> start [force] gluster volume geo-rep <master> <slave-url> stop [force] gluster volume geo-rep <master> <slave-url> delete gluster volume geo-rep <master> <slave-url> config gluster volume geo-rep <master> <slave-url> status The geo-replication is distributed. The session will be created, and gsyncd will be spawned on all relevant nodes, instead of only one node. geo-rep: Collecting status detail related data Added persistent store for saving information about TotalFilesSynced, TotalSyncTime, TotalBytesSynced Changes in the status information in socket: Existing(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01; New(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01;SyncTime=0.69978; TotalSyncTime=2.890044;TotalFilesSynced=6;TotalBytesSynced=143640; Persistent details stored in /var/lib/glusterd/geo-replication/${mastervol}/${eSlave}-detail.status Change-Id: I1db7fc13ffca2e415c05200b0109b1254067f111 BUG: 847839 Original Author: Avra Sengupta <asengupt@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Csaba Henk <csaba@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5132 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-17 19:17:16 +0000