summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd
Commit message (Collapse)AuthorAgeFilesLines
* glusterd/quota: upgrade quota.conf file during an upgradeManikandan Selvaganesh2016-11-114-16/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem ======= When quota is enabled on 3.6, it will have quota conf version in quota.conf as v1.1. This node gets upgraded to 3.7 but it will still have quota conf version as v1.1 until a quota enable/disable/set limit is initiated. When this is not initiated and when this node tries to peer probe a node which is a fresh install of 3.7 (which will have quota conf version as v1.2), then this will result in "Peer rejected" state. This patch fixes the issue. Solution ======== When an upgrade happens from 3.6 to 3.7, quota.conf file needs to be modified as well. With 3.6, in quota.conf the version will be v1.1 and it needs to be changed to v1.2 from 3.7. This is because in 3.7, inode quota feature is introduced. So when an op-version bumpup happens quota.conf needs to be upgraded with quota conf version v1.2 and all the 16 byte uuid needs to be changed to 17 bytes uuid as well. Previously, when the cluster version is upgraded to 3.7, the quota.conf got upgraded as well. But, the upgradation was done only when quota enable/disable/set limit is done. With this patch, the upgradation is done during a cluster op version bump up as well. >Reviewed-on: http://review.gluster.org/15352 >Tested-by: Atin Mukherjee <amukherj@redhat.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Smoke: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> >(cherry picked from commit 4b2cff614462508eef529c5d128e0974720e3f50) Change-Id: Idb5ba29d3e1ea0e45c85d87c952c75da9e0f99f0 BUG: 1392718 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/15792 Tested-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* snapshot: Fix for memory leaks in snapshot code pathAvra Sengupta2016-11-013-12/+47
| | | | | | | | | | | | | | | | | | | > Reviewed-on: http://review.gluster.org/15668 > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> (cherry picked from commit 48a4c4e525665115f7e8c478d3bf51764427378d) Change-Id: Idc2cb16574d166e3c0ee1f7c3a485f1acb19fc8c BUG: 1388350 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15719 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: conditionally pass uuid for EVENT_PEER_CONNECTAtin Mukherjee2016-10-241-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | When a new node is probed, on the first RPC_CLNT_CONNECT peerctx->uuid is set to NULL as the same is yet to be populated. However the subesquent (dis)connect events would be carrying the valid UUIDs. Solution is not to generate EVENT_PEER_CONNECT on a peer probe trigger as CLI is already going to take care of generating the same. >Reviewed-on: http://review.gluster.org/15678 >Smoke: Gluster Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Change-Id: I2f0de054ca09f12013a6afdd8ee158c0307796b9 BUG: 1387564 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15697 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* cli, glusterd: Address issues in get-state cli outputSamikshan Bairagya2016-10-214-79/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following data points: 1. Volume type 2. Peer state 3. List of other hostnames for a peer 4. Data unit information for rebalance The following data points are removed: 1. Mount options and filesystem types for bricks 2. global-option-version from list of global options The following data points are added: 1. Replica Count 2. Tier type for bricks belonging to hot/cold tier > Reviewed-on: http://review.gluster.org/15662 > Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> (cherry picked from commit daea58a51b70f80ab04f115e49f8bf8790b6046a) Change-Id: I5011250e863fdc4929b203cdb345d79b2f16c6a5 BUG: 1387502 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/15696 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: set the brickinfo->port before spawning the bricksAtin Mukherjee2016-10-211-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | As of now, when glusterd spawns a brick process, post spawning, the brickinfo's port is set. The side effect of this is it opens up an window where the pmap_signin event can be initiated by the brick to glusterd and glusterd fails to update signed_in flag since the brickinfo port is still 0 and the comparison of port and brickinfo->port fails. As a solution, set the brickinfo->port post pmap_registry_alloc and if the brick spawn fails reset it to 0. This logic applies for rdma port too. >Reviewed-on: http://review.gluster.org/15655 >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> >Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I00a13d4c6d6809ebd19a972aa13e71ee5eac7e35 BUG: 1386338 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15679 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* glusterd: enable default configurations post upgrade to >= 3.9.0 versionsAtin Mukherjee2016-10-172-10/+80
| | | | | | | | | | | | | | | | | | | | | | | | | With 3.8.0 onwards volume options like nfs.disable, transport.address-family have some default configuration value. If a volume was created pre upgrade to 3.8.0 or higher the default options are not set post upgrade. This patch takes care of putting the default values in the op-version bump up workflow. However these changes will only reflect from 3.9.0 onwards >Reviewed-on: http://review.gluster.org/15568 >Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Smoke: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: soumya k <skoduri@redhat.com> >Reviewed-by: Kaushal M <kaushal@redhat.com> Change-Id: I9a8d848cd08d87ddcb80dbeac27eaae097d9cbeb BUG: 1385451 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15652 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com>
* glusterd: fix return val in glusterd_op_volume_dict_uuid_to_hostname ()Atin Mukherjee2016-09-281-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterd_op_volume_dict_uuid_to_hostname () ignores few dict_get_str failures but doesn't reset the ret value to 0. Reproducer steps: 1. Configure a volume and start it (gNFS has to be disabled) 2. gluster volume status An warning log is observed with: [MSGID: 106217] [glusterd-op-sm.c:4706:glusterd_op_modify_op_ctx] 0-management: Failed uuid to hostname conversion [2016-09-22 09:21:38.537533] W [MSGID: 106387] [glusterd-op-sm.c:4812:glusterd_op_modify_op_ctx] 0-management: op_ctx modification failed >Reviewed-on: http://review.gluster.org/15547 >Smoke: Gluster Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> >Reviewed-by: Kaushal M <kaushal@redhat.com> Change-Id: I1d3aa79304d83a9d5db1b7198773d8c2780e24a9 BUG: 1379287 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15572 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* ganesha/glusterd : Correct the path for ganesha conf dir in MakefileJiffin Tony Thottan2016-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value for ganesha conf dir in Makefile.am is mistakenly entered as following : DCONFDIR=\"/$(runstatedir)/gluster/shared_storage/nfs-ganesha\" Here value for runstatedir is seems to "NULL" which results wrong path for ganesha configuration directory Upstream reference : > Change-Id: I0b7ebd8e2503de0cb79b601553c4405d0d1fd711 > BUG: 1355956 > Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> > Reviewed-on: http://review.gluster.org/15355 > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: soumya k <skoduri@redhat.com> > Reviewed-by: Niels de Vos <ndevos@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.org> > (cherry picked from commit 7e18e16f9f62ed95acded0fb3f2a8784087f59c0) Change-Id: I0b7ebd8e2503de0cb79b601553c4405d0d1fd711 BUG: 1376874 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15521 Reviewed-by: soumya k <skoduri@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Tier: failing detach commit on detach failure and in-progresshari gowtham2016-09-151-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | back-port of: http://review.gluster.org/#/c/15438/ PROBLEM: if detach status has failed or if it remains in progress we allow detach commit to happen. only detach force should be allowed. FIX: check the detach status for failure or inprogress and disallow with the apt error message. >Change-Id: Ib97d540fec67717bb55c18d133187c665cf69ef1 >BUG: 1374584 >Signed-off-by: hari gowtham <hgowtham@redhat.com> >Reviewed-on: http://review.gluster.org/15438 >Smoke: Gluster Build System <jenkins@build.gluster.org> >Tested-by: hari gowtham <hari.gowtham005@gmail.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: hari gowtham <hgowtham@redhat.com> Change-Id: I4f8c3859121ee0827df57348069a243a2502889a BUG: 1375570 Reviewed-on: http://review.gluster.org/15493 Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* cluster/ec: Add support for hardware accelerationXavier Hernandez2016-09-091-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements functionalities for fast encoding/decoding using hardware support. Currently optimized x86_64, SSE and AVX is added. Additionally this patch implements a caching mecanism for inverse matrices to reduce computation time, as well as a new method for computing the inverse that takes quadratic time instead of cubic. Finally some unnecessary memory copies have been eliminated to further increase performance. >Change-Id: I26c75f26fb4201bd22b51335448ea4357235065a >BUG: 1289922 >Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> >Reviewed-on: http://review.gluster.org/12837 >Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> BUG: 1374841 Change-Id: I83731663922ed11ca84536deab5737463416e1e0 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15455 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* snapshot/eventsapi: Integrate snapshot events with eventsapiAvra Sengupta2016-09-072-7/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/15329/ 1. EVENT_SNAPSHOT_CREATED : snapshot_name=snap1 volume_name=test_vol snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 2. EVENT_SNAPSHOT_CREATE_FAILED : snapshot_name=snap1 volume_name=test_vol error=Snapshot snap1 already exists 3. EVENT_SNAPSHOT_ACTIVATED : snapshot_name=snap1 snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 4. EVENT_SNAPSHOT_ACTIVATE_FAILED: snapshot_name=snap1 error=Snapshot snap1 is already activated. 5. EVENT_SNAPSHOT_DEACTIVATED : snapshot_name=snap1 snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 6. EVENT_SNAPSHOT_DEACTIVATE_FAILED : snapshot_name=snap3 error=Snapshot (snap3) does not exist. 7. EVENT_SNAPSHOT_SOFT_LIMIT_REACHED : volume_name=test_vol volume_id=2ace2616-5591-4b9b-be2a-38592dda5758 8. EVENT_SNAPSHOT_HARD_LIMIT_REACHED : volume_name=test_vol volume_id=2ace2616-5591-4b9b-be2a-38592dda5758 9. EVENT_SNAPSHOT_RESTORED : snapshot_name=snap1 volume_name=test_vol snapshot_uuid=3a840ec5-08da-4f2b-850d-1d5539a5d14d 10. EVENT_SNAPSHOT_RESTORE_FAILED : snapshot_name=snap10 error=Snapshot (snap10) does not exist 11. EVENT_SNAPSHOT_DELETED : snapshot_name=snap1 snapshot_uuid=d9ff3d4f-f579-4345-a4da-4f9353f0950c 12. EVENT_SNAPSHOT_DELETE_FAILED : snapshot_name=snap2 error=Snapshot (snap2) does not exist 13. EVENT_SNAPSHOT_CLONED : clone_uuid=93ba9f06-cb9c-4ace-aa52-2616e7f31022 snapshot_name=snap1 clone_name=clone2 14. EVENT_SNAPSHOT_CLONE_FAILED : snapshot_name=snap1 clone_name=clone2 error=Volume with name:clone2 already exists 15. EVENT_SNAPSHOT_CONFIG_UPDATED : auto-delete=enable config_type=system_config config_type=volume_config hard_limit=100 16. EVENT_SNAPSHOT_CONFIG_UPDATE_FAILED : error=Invalid snap-max-soft-limit 110. Expected range 1 - 100 17. EVENT_SNAPSHOT_SCHEDULER_INITIALISED : status=Success 18. EVENT_SNAPSHOT_SCHEDULER_INIT_FAILED 19. EVENT_SNAPSHOT_SCHEDULER_ENABLED : status=Successfuly Enabled 20. EVENT_SNAPSHOT_SCHEDULER_ENABLE_FAILED : error=Snapshot scheduler is already enabled. 21. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_ADDED : status=Successfuly added job job1 22. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_ADD_FAILED : status=Failed to add job job1 error=The job already exists. 23. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_EDITED : status=Successfuly edited job job1 24. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_EDIT_FAILED : status=Failed to edit job job2 error=The job cannot be found. 25. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_DELETED : status=Successfuly deleted job job1 26. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_DELETE_FAILED : status=Failed to delete job job1 error=The job cannot be found. 27. EVENT_SNAPSHOT_SCHEDULER_DISABLED : status=Successfuly Disabled 28. EVENT_SNAPSHOT_SCHEDULER_DISABLE_FAILED : error=Snapshot scheduler is already disabled. > Reviewed-on: http://review.gluster.org/15329 > Tested-by: Aravinda VK <avishwan@redhat.com> > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> (cherry picked from commit c1278de9a5fb6a64455f42b8b17a8d05b74c2420) Change-Id: I3479cc3fb7af3c76ded67cf289f99547d0a55d21 BUG: 1372278 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15381 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* afr: Consume compound fops in afr transactionAnuradha Talur2016-09-061-0/+7
| | | | | | | | | | | | | | | Backport of: http://review.gluster.org/15014 cherry-picked from befae0b48729894282b5b8b174907e24779c3442 Change-Id: I62ff41aa80fe700df2dda8b10606e484ee1f382e BUG: 1372686 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15388 Tested-by: Krutika Dhananjay <kdhananj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* event: fix gf_event messages for replace/reset brick opAnuradha Talur2016-08-311-5/+0
| | | | | | | | | | | | Change-Id: I80ebeeaffd2b228d7d0796c8d08bc2a051c4ccac BUG: 1266876 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15370 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd (op-sm): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-301-20/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I6c1474547586b5e43f30545872ec512cdd32dac2 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15269 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd : Introduce reset brickAnuradha Talur2016-08-2917-271/+956
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The command basically allows replace brick with src and dst bricks as same. Usage: gluster v reset-brick <volname> <hostname:brick-path> start This command kills the brick to be reset. Once this command is run, admin can do other manual operations that they need to do, like configuring some options for the brick. Once this is done, resetting the brick can be continued with the following options. gluster v reset-brick <vname> <hostname:brick> <hostname:brick> commit {force} Does the job of resetting the brick. 'force' option should be used when the brick already contains volinfo id. Problem: On doing a disk-replacement of a brick in a replicate volume the following 2 scenarios may occur : a) there is a chance that reads are served from this replaced-disk brick, which leads to empty reads. b) potential data loss if next writes succeed only on replaced brick, and heal is done to other bricks from this one. Solution: After disk-replacement, make sure that reset-brick command is run for that brick so that pending markers are set for the brick and it is not chosen as source for reads and heal. But, as of now replace-brick for the same brick-path is not allowed. In order to fix the above mentioned problem, same brick-path replace-brick is needed. With this patch reset-brick commit {force} will be allowed even when source and destination <hostname:brickpath> are identical as long as 1) destination brick is not alive 2) source and destination brick have the same brick uuid and path. Also, the destination brick after replace-brick will use the same port as the source brick. Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de BUG: 1266876 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12250 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-6/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Id6f7555e35fd2bc37e8b9f81ac37d5384624501c BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15285 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-6/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I4ce4ec8073c1da4ea60bf5488b3f57c91c4cffa6 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15284 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com>
* glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-12/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Ibe060202efb1f175a4348ff0927a7b44303d96e6 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15283 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd (snapshot-utils): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-5/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I5d3372de16a1e03a6391885434ffea84f6a00412 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15277 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd (replace-brick): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-9/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I58aede09a2f2c65a438188d7319ad7a61395e7a9 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15274 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd (rebalance): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-2/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I136cf4c1d318f98933f3bfed81e2de3da0f56abc BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15273 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd (peer-utils): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-1/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I99e818d71e72aaa2dfb629f00a5245365f582b99 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15270 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd (hooks): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-3/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I401090b0c51c90cf148c75756408c70ccee6a5e6 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15267 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd (handshake): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-5/+1
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I25b40c89d883d088e4aaba87ce0bf235a09a27da BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15266 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com>
* glusterd (bitd-svc): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-1/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I1a96cd72fce6b109769f11f17b625fe152298888 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15260 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd (ganesha): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-12/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I8496b0d1158aeac88cdee991e40c5bb1705f1c09 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15262 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd (store): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-2/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I9de669261b91e89a719997b54adeea893f8c3bee BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15264 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd (quota): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-1/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Id1bc618261a73d91847f65cb790109fda9e77c65 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15271 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com>
* glusterd: Fix msgid in mountbroker logsKotresh HR2016-08-291-1/+1
| | | | | | | | | | | | | | Fix declared but not used msgid in mountbroker logs. Change-Id: I68d331f2741726624f647a8bc437e1ebcddd038f Signed-off-by: Kotresh HR <khiremat@redhat.com> BUG: 1346138 Reviewed-on: http://review.gluster.org/15333 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-271-1/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Id3577872ef720787796f7bfe6772734a3b26fef0 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15286 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* md-cache: Do not use features.cache-invalidation for both md-cache and upcallPoornima G2016-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the volume set option features.cache-invalidation enables upcall feature on server side and md-cache cache-invalidation on client side. There are multiple problems that can arise from this: 1. The scenario when user wants to, enable upcall for nfs-ganesha setup, but do not want to enable md-cache cache-invalidation, as the nfs-clients have already cached the metadata and upcall is used to to invalidate the nfs-client cache. In this case, users should have a way of disabling md-cache invalidation without disabling upcall. 2. Upcall requires a op-version of GD_OP_VERSION_3_7_0, where as md-cache invalidation requires an op version of GD_OP_VERSION_3_9_0. Consider a setup where the servers are in op-version GD_OP_VERSION_3_7_0, and th clients are in op-version GD_OP_VERSION_3_9_0. if there is one single volume set option, user can enable this feature in this setup. But it can lead to stale xattr cache as the xattr invalidation was introduced in upcall only in release 3.8. Hence, we should not be able to enable md-cache invalidation, if all the servers and clients are not on opversion >= GD_OP_VERSION_3_9_0. To solve the above mentioned issues, we have seperate volume options for enabling md-cache invalidation and upcall. But this can lead to issues when user enable md-cache invalidation and forgets to enable upcall. Probably in the next release, these can be enables by default. Change-Id: Ie70eff97fe12fcb623eec8f4f5861ac065bf483e BUG: 1211863 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15314 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd/cli: cli to get local state representation from glusterdSamikshan Bairagya2016-08-269-1/+846
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is no existing CLI that can be used to get the local state representation of the cluster as maintained in glusterd in a readable as well as parseable format. The CLI added has the following usage: # gluster get-state [daemon] [odir <path/to/output/dir>] [file <filename>] This would dump data points that reflect the local state representation of the cluster as maintained in glusterd (no other daemons are supported as of now) to a file inside the specified output directory. The default output directory and filename is /var/run/gluster and glusterd_state_<timestamp> respectively. The option for specifying the daemon name leaves room to add support for other daemons in the future. Following are the data points captured as of now to represent the state from the local glusterd pov: * Peer: - Primary hostname - uuid - state - connection status - List of hostnames * Volumes: - name, id, transport type, status - counts: bricks, snap, subvol, stripe, arbiter, disperse, redundancy - snapd status - quorum status - tiering related information - rebalance status - replace bricks status - snapshots * Bricks: - Path, hostname (for all bricks these info will be shown) - port, rdma port, status, mount options, filesystem type and signed in status for bricks running locally. * Services: - name, online status for initialised services * Others: - Base port, last allocated port - op-version - MYUUID Change-Id: I4a45cc5407ab92d8afdbbd2098ece851f7e3d618 BUG: 1353156 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/14873 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/ganesha : create export configuration file in shared storageJiffin Tony Thottan2016-08-263-19/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the second patch which moves export related configuration for a volume into shared storage. The main change includes in scripts create-export-ganesha.sh, dbus-send.sh and the handling of volume set command "ganesha.enable". The manipulation of EXPORT_ID move from dbus-send.sh to create-export-ganesha.sh. In volume set handling following has performed stage | commit ---------------------------------------------------------- 1.) gluster v set <volname> ganesha.enable on None | create export file | in node where cli executed, | thne export volume via dbus 2.) gluster v set <volname> ganesha.enable off unexport volume via dbus | remove export file from the | shared storage ----------------------------------------------------------- More details can be found at http://review.gluster.org/#/c/15105/ Change-Id: Ia8b0e89bc8fff24b0bc5d20a538a89212894a8e4 BUG: 1355956 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14908 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Revert "glusterd-ganesha : copy ganesha export configuration files during ↵Jiffin Tony Thottan2016-08-265-162/+71
| | | | | | | | | | | | | | | | | | | | | reboot" This reverts commit f71e2fa49af185779b9f43e146effd122d4e9da0. Reason: As part of sync up node reboot this patch copies ganesha export conf file from a source node. This change is no more require if the export files are available in shared storage. Change-Id: Id9c1ae78377bbd7d5d80aa1c14f534e30feaae97 BUG: 1355956 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14907 Reviewed-by: soumya k <skoduri@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-261-6/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I212abb47d9f35922b3f8253137ebab6841a53eed BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15261 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd (mgmt): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-251-41/+24
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Ia98f2934b179145398895600a3f34dbff841c3bd BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15268 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd (quotad-svc): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-251-2/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I186bdee9f7f72251f552a95a0c08a9be9aec7c83 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15272 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd (rpc-ops): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-251-3/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I65e6f8cdae150a796da485d9840838c4306b623b BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15275 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd (statedump): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-251-3/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I92970f7b7c2a881ba5678dbf1f0bd2bf6c68f4db BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15279 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd (syncop): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-251-4/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I40da2a344be3da4bda2370b1ae1eb77dc00b033e BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15281 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* ganesha/scripts : remove 'HA_VOL_SERVER' from the codeJiffin Tony Thottan2016-08-253-46/+20
| | | | | | | | | | | | | | | | | | | | The parameter HA_VOL_SERVER introduced intially ganesha-ha.conf to specify gluster server from which to mount the shared data volume. But after introducing new cli for the same purpose, it become unnecessary. The existence of that parameter can lead confussion to the users. This patch will remove/replace all the instance of HA_VOL_SERVER from the code Change-Id: I638c61dcd2c21ebdb279bbb141d35bb806bd3ef0 BUG: 1350371 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14812 Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterd: Improve mountbroker logsKotresh HR2016-08-252-6/+84
| | | | | | | | | | | | | | | | When Mountbroker mount fails, it was just returning EPERM or EACCESS without logging exact failure. This patch improves the logging by logging exact failure. Change-Id: I3cd905f95865153f70dfcc3bf1fa4dd19af16455 BUG: 1346138 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15319 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* feature/bitrot: Ondemand scrub option for bitrotKotresh HR2016-08-255-4/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The bitrot scrubber takes 'hourly/daily/biweekly/monthly' as the values for 'scrub-frequency'. There is no way to schedule the scrubbing when the admin wants it. Ondemand scrubbing brings in the new option 'ondemand' with which the admin can start scrubbing ondemand. It starts the scrubbing immediately. Ondemand scrubbing is successful only if the scrubber is in 'Active (Idle)' (waiting for it's next frequency cycle to start scrubbing). It is not entertained when the scrubber is in 'Paused' or already running. Here is the command line syntax. gluster volume bitrot <vol name> scrub ondemand Change-Id: I84c28904367eed827a7dae8d6a535c14b28e9f4d BUG: 1366195 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15111 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* glusterd/ganesha : Move ganesha-ha.conf and ganesha.conf to shared storageJiffin Tony Thottan2016-08-253-26/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently all the ganesha related configuration files(ganesha.conf, ganesha-ha.conf, export files, etc) is stored locally at /etc/ganesha on a every node in ganesha cluster. Usually we end up in two issues by doing so : * difficult in modifiying ganesha related conf file * diffciult to maintain consistency of conf file across ganesha cluster To tackle this, we plan to move all the ganesha configuration to shared storage. As a first step in this patch ganesha.conf and ganesha-ha.conf move to shared storage. Here actual ganesha.conf will resides in shared stoarge and symlinks will be created in /etc/ganesha when the option "gluster nfs-ganesha enable" is executed and remove those during the "disable" part. Modified prerequisites to done before running globaloption: * enable shared storage * create nfs-ganesha folder in shared storage * create ganesha.conf and ganesha-ha.conf in it More details can be found at http://review.gluster.org/#/c/15105/ Change-Id: Ifabb6c5db50061f077a03932940190af74e2ca7f BUG: 1355956 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14906 Reviewed-by: soumya k <skoduri@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/ec: Do multi-threaded self-healPranith Kumar K2016-08-241-0/+10
| | | | | | | | | | | BUG: 1368451 Change-Id: I5d6b91d714ad6906dc478a401e614115c89a8fbb Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15083 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* eventsapi: Fix disable-events issueAravinda VK2016-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Events related sources are not loaded in libglusterfs when configure is run with --disable-events option. Due to this every call of gf_event should be guarded with USE_EVENTS macro. To prevent this, USE_EVENTS macro was included in events.c itself(Patch #15054) Instead of disabling building entire directory "events", selectively disabled the code. So that constants and empty function gf_event is exposed. Code will not fail even if gf_event is called when events is disabled. BUG: 1368042 Change-Id: Ia6abfe9c1e46a7640c4d8ff5ccf0e9c30c87f928 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15198 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* glusterd: add async events (part 2)Atin Mukherjee2016-08-237-27/+86
| | | | | | | | | | | Change-Id: I7a5687143713c283f0051aac2383f780e3e43646 BUG: 1360809 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15153 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* snapshot/cli: Fix snapshot status xml outputAvra Sengupta2016-08-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | snap status --xml errors out if a brick is down and doesn't have pid. It is handled in the cli of the snap status where "N/A" is displayed in such a scenario. Handled the same in xml snap status <snapname> --xml fails as the writer is not initialised for the same. Using GF_SNAP_STATUS_TYPE_ITER instead of GF_SNAP_STATUS_TYPE_SNAP for all snap's status to differentiate between the two scenarios. Added testcase volume-snapshot-xml.t to check all snapshot commands xml outputs Change-Id: I99563e8f3e84f1aaeabd865326bb825c44f5c745 BUG: 1325831 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14018 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot: Display number of snapshots in volume infoAvra Sengupta2016-08-231-0/+5
| | | | | | | | | | | | | | | Display number of snapshots in a volume in volume info output. This number gets modified, with create, delete, and restore operations. Change-Id: Ic9b7c2b6950980f8ce75ca362998c097ea7c863d BUG: 1360693 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15029 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: Add async eventsAtin Mukherjee2016-08-229-15/+78
| | | | | | | | | | | | | | | | | | | As the eventing framework is already in the code, this patch targets to capture all the async glusterd events which are important to be notified to the higher layers which consume the eventing framework. I plan to break this work into two different patches where this patch set covers the first set of events. Change-Id: Ie1bd4f6fa84117b26ccb4c75bc4dc68e6ef19134 BUG: 1360809 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15015 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rohan Kanade <rkanade@redhat.com> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
generated by cgit (git 2.34.1) at 2024-06-30 22:46:46 +0000