summaryrefslogtreecommitdiffstats
path: root/xlators/mount
Commit message (Collapse)AuthorAgeFilesLines
* fuse: occasional logging for fuse device 'weird' write errorsCsaba Henk2020-05-282-1/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is a followup to I510158843e4b1d482bdc496c2e97b1860dc1ba93. In referred change we pushed log messages about 'weird' write errors to fuse device out of sight, by reporting them at Debug loglevel instead of Error (where 'weird' means errno is not POSIX compliant but having meaningful semantics for FUSE protocol). This solved the issue of spurious error reporting. And so far so good: these messages don't indicate an error condition by themselves. However, when they come in high repetitions, that indicates a suboptimal condition which should be reported.[1] Therefore now we shall emit a Warning if a certain errno occurs a certain number of times[2] as the outcome of a write to the fuse device. ___ [1] typically ENOENTs and ENOTDIRs accumulate when glusterfs' inode invalidation lags behind the kernel's internal inode garbage collection (in this case above errnos mean that the inode which we requested to be invalidated is not found in kernel). This can be mitigated with the invalidate-limit command line / mount option, cf. bz#1732717. [2] 256, as of the current implementation. Change-Id: I8cc7fe104da43a88875f93b0db49d5677cc16045 Updates: #1000 Signed-off-by: Csaba Henk <csaba@redhat.com> (cherry picked from commit c1baf3c68b87584aea5389af958326f6ed01d7ec)
* mount/fuse: Wait for 'mount' child to exit before dyingPranith Kumar K2020-04-091-0/+27
| | | | | | | | | | | | | | | | Problem: tests/bugs/protocol/bug-1433815-auth-allow.t fails sometimes because of stale mount. This stale mount comes into picture when parent process dies without waiting for the child process which mounts fuse fs to die Fix: Wait for mounting child process to die before dying. Fixes: #1152 Change-Id: I8baee8720e88614fdb762ea822d5877973eef8dc Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* mount.glusterfs: don't strip / from subdir-mountsAndreas Loibl2020-02-201-0/+1
| | | | | Change-Id: Ib07c31dc6669aa9d9f84a21e6160237290ed9afb Fixes: bz#1804786
* fuse: degrade logging of write failure to fuse deviceCsaba Henk2020-01-092-7/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: FUSE uses failures of communicating with /dev/fuse with various errnos to indicate in-kernel conditions to userspace. Some of these shouldn't be handled as an application error. Also the standard POSIX errno description should not be shown as they are misleading in this context. Solution: When writing to the fuse device, the caller of the respective convenience routine can mask those errnos which don't qualify to be an error for the application in that context, so then those shall be reported at DEBUG level. The possible non-standard errnos are reported with their POSIX name instead of their description to avoid confusion. (Eg. for ENOENT we don't log "no such file or directory", we log indeed literal "ENOENT".) Change-Id: I510158843e4b1d482bdc496c2e97b1860dc1ba93 updates: bz#1193929 Signed-off-by: Csaba Henk <csaba@redhat.com>
* Avoid buffer overwrite due to uuid_utoa() misuseDmitry Antipov2019-12-271-14/+22
| | | | | | | | | | | | | | | Code like: f(..., uuid_utoa(x), uuid_utoa(y)); is not valid (causes undefined behaviour) because uuid_utoa() uses the only static thread-local buffer which will be overwritten by the subsequent call. All such cases should be converted to use uuid_utoa_r() with explicitly specified buffer. Change-Id: I5e72bab806d96a9dd1707c28ed69ca033b9c8d6c Updates: bz#1193929 Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
* fuse: add missing unlockXie Changlong2019-12-101-1/+3
| | | | | | updates: bz#1193929 Change-Id: I50f75f730ea6970e99347fcee661ce9dc8477725 Signed-off-by: Xie Changlong <xiechanglong@cmss.chinamobile.com>
* ctime: Fix ctime inconsisteny with utimensatKotresh HR2019-12-101-0/+8
| | | | | | | | | | | | | | | | | | | | Problem: When touch is used to create a file, the ctime is not matching atime and mtime which ideally should match. There is a difference in nano seconds. Cause: When touch is used modify atime or mtime to current time (UTIME_NOW), the current time is taken from kernel. The ctime gets updated to current time when atime or mtime is updated. But the current time to update ctime is taken from utime xlator. Hence the difference in nano seconds. Fix: When utimesat uses UTIME_NOW, use the current time from kernel. fixes: bz#1773530 Change-Id: I9ccfa47dcd39df23396852b4216f1773c49250ce Signed-off-by: Kotresh HR <khiremat@redhat.com>
* Improve logging of fusedump creation failureCsaba Henk2019-11-071-4/+10
| | | | | | updates bz#1193929 Signed-off-by: Csaba Henk <csaba@redhat.com> Change-Id: I12cbe1d87f60fb497654d0e13e12171940867f76
* Multiple files: make root gfid a static variableYaniv Kaul2019-10-141-3/+1
| | | | | | | | | | | | | In many places we use it, compare to it, etc. It could be a static variable, as it really doesn't change. I think it's better than initializing to 0 and then doing gfid[15] = 1 or other tricks. I think there are additional oppportunuties to make more variables static. This is an attempt at an easy one. Change-Id: I7f23a30a94056d8f043645371ab841cbd0f90d19 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* glusterfs/fuse: Reduce the default lru-limit valueN Balachandran2019-09-242-2/+2
| | | | | | | | | | The current lru-limit value still uses memory for upto 128K inodes. Reduce the default value of lru-limit to 64K. Change-Id: Ica2dd4f8f5fde45cb5180d8f02c3d86114ac52b3 Fixes: bz#1753880 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* mount/fuse - Fixing a coverity issueBarak Sason2019-08-201-0/+1
| | | | | | | | | | Fixed resource leak of dict_value and newkey variables CID: 1398630 Updates: bz#789278 Change-Id: I589fdc0aecaeb4f446cd29f95bad36ccd7a35beb Signed-off-by: Barak Sason <bsasonro@redhat.com>
* mount.glusterfs: make fcache-keep-open option take a valuePhilip Spencer2019-08-161-8/+14
| | | | | | Fixes: bz#1158130 Change-Id: Ifdeaed7c9fbe85f7ce421f7c89cbe7265e45f77c Signed-off-by: Amar Tumballi <amarts@redhat.com>
* fuse: Set limit on invalidate queue sizeN Balachandran2019-08-143-16/+55
| | | | | | | | | | | | | If the glusterfs fuse client process is unable to process the invalidate requests quickly enough, the number of such requests quickly grows large enough to use a significant amount of memory. We are now introducing another option to set an upper limit on these to prevent runaway memory usage. Change-Id: Iddfff1ee2de1466223e6717f7abd4b28ed947788 Fixes: bz#1732717 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* fuse: rate limit reading from fuse device upon receiving EPERMCsaba Henk2019-08-083-0/+31
| | | | | | Fixes: bz#1644322 Change-Id: I53e8fa362cd8c7d04fb1c4abb606a9abb642c592 Signed-off-by: Csaba Henk <csaba@redhat.com>
* fuse: add missing GF_FREE to fuse_interruptCsaba Henk2019-07-251-1/+4
| | | | | | Change-Id: Id7e003e4a53d0a0057c1c84e1cd704c80a6cb015 Fixes: bz#1728047 Signed-off-by: Csaba Henk <csaba@redhat.com>
* ibverbs/rdma: remove from buildAmar Tumballi2019-07-131-10/+0
| | | | | | | | | | | | | | | We have proposed about this an year ago, and with recent smoke failures, it looks like the right time to take such call. ref: https://lists.gluster.org/pipermail/gluster-users/2018-July/034400.html With this, glusterfs-8.0 wouldn't have rdma feature, and would allow some modularity changes possible with rpc layer (as we would have just 1 transport) Updates: bz#1635688 Change-Id: Ia277dca4d4b1f0cffae20819024a52b075b775e5 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* Remove hadoop related code from the codebaseVijay Bellur2019-07-092-25/+12
| | | | | | | | | As Hadoop is no longer supported, dropping code for handling Hadoop access. Fixes: bz#1728417 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Change-Id: I8fcf4faacb364f1c9a8abb0c48faec337087f845
* core: use multiple servers while mounting a volume using ipv6Sanju Rakonde2019-07-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | According to man page: mount -t glusterfs [-o <options>] <server1>,<server2>, <server3>,..<serverN>:/<volname>[/<subdir>] <mount_point> When we try mount -t glusterfs 52:54:00:23:5a:b6,52:54:00:a0:be:ed:/ta-vol1 /mnt/ta we see the below msg in log: [2019-06-17 11:41:36.085809] I [MSGID: 100030] [glusterfsd.c:2867:main] 0-/usr/local/sbin/glusterfs: Started running /usr/local/sbin/glusterfs version 7dev (args: /usr/local/sbin/glusterfs --process-name fuse --volfile-server=52:54:00:23:5a --volfile-id=/ta-vol1 /mnt/ta) With this change, we'll able to give multiple volfile servers while mounting the volume using ipv6. After the change, I see the following in log: [2019-06-17 12:00:21.183658] I [MSGID: 100030] [glusterfsd.c:2867:main] 0-/usr/local/sbin/glusterfs: Started running /usr/local/sbin/glusterfs version 7dev (args: /usr/local/sbin/glusterfs --process-name fuse --volfile-server=52:54:00:23:5a:b6 --volfile-server=52:54:00:a0:be:ed --volfile-id=/ta-vol1 /mnt/ta) fixes: bz#1719290 credits: Aga <aga_1990@hotmail.com> Change-Id: Icf89bea3ba15d8374ef428aeb59f2ef55ad544ec Signed-off-by: Sanju Rakonde <srakonde@redhat.com>
* stack: Make sure to have unique call-stacks in all casesPranith Kumar K2019-05-302-8/+8
| | | | | | | | | | | | | | | At the moment new stack doesn't populate frame->root->unique in all cases. This makes it difficult to debug hung frames by examining successive state dumps. Fuse and server xlators populate it whenever they can, but other xlators won't be able to assign 'unique' when they need to create a new frame/stack because they don't know what 'unique' fuse/server xlators already used. What we need is for unique to be correct. If a stack with same unique is present in successive statedumps, that means the same operation is still in progress. This makes 'finding hung frames' part of debugging hung frames easier. fixes bz#1714098 Change-Id: I3e9a8f6b4111e260106c48a2ac3a41ef29361b9e Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* mount.glusterfs: change the error messageAmar Tumballi2019-03-291-2/+7
| | | | | | | | | | | | | | | In scenarios where a mount fails before creating log file, doesn't make sense to give message to 'check log file'. See below: ``` ERROR: failed to create logfile "/var/log/glusterfs/mnt.log" (No space left on device) ERROR: failed to open logfile /var/log/glusterfs/mnt.log Mount failed. Please check the log file for more details. ``` Fixes: bz#1688068 Change-Id: I1d837caa4f9bc9f1a37780783e95007e01ae4e3f Signed-off-by: Amar Tumballi <amarts@redhat.com>
* fuse : fix high sev coverity issueSunny Kumar2019-03-211-1/+7
| | | | | | | | | | | | This patch fixed coverity issue in fuse-bridge.c. CID : 1398630 : Resource leak CID : 1399757 : Uninitialized pointer read updates: bz#789278 Change-Id: I69f8591400ee56a5d215eeac443a8e3d7777db27 Signed-off-by: Sunny Kumar <sunkumar@redhat.com>
* mount/fuse: Fix spelling mistakePranith Kumar K2019-03-151-1/+2
| | | | | | updates bz#1193929 Change-Id: I55ffa8f086ad9570f2526d91c196d7de9ffe6add Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* fuse : fix memory leakSunny Kumar2019-02-251-0/+4
| | | | | | | | | | | | | | | | | | | | This patch fixes memory leak reported by ASan. Tracebacks: ERROR: LeakSanitizer: detected memory leaks Direct leak of 712 byte(s) in 1 object(s) allocated from: #0 0x7f35139dc848 in __interceptor_malloc (/lib64/libasan.so.5+0xef848) #1 0x7f35136efb29 in __gf_malloc ../libglusterfs/src/mem-pool.c:136 #2 0x7f3510591ce9 in fuse_thread_proc ../xlators/mount/fuse/src/fuse-bridge.c:5929 #3 0x7f351336d58d in start_thread (/lib64/libpthread.so.0+0x858d) SUMMARY: AddressSanitizer: 712 byte(s) leaked in 1 allocation(s). updates: bz#1633930 Change-Id: Ie5b4da6b338d8e5fc770c5b2da1238e3462468ac Signed-off-by: Sunny Kumar <sunkumar@redhat.com>
* core: implement a global thread poolXavi Hernandez2019-02-182-21/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a thread pool that is wait-free for adding jobs to the queue and uses a very small locked region to get jobs. This makes it possible to decrease contention drastically. It's based on wfcqueue structure provided by urcu library. It automatically enables more threads when load demands it, and stops them when not needed. There's a maximum number of threads that can be used. This value can be configured. Depending on the workload, the maximum number of threads plays an important role. So it needs to be configured for optimal performance. Currently the thread pool doesn't self adjust the maximum for the workload, so this configuration needs to be changed manually. For this reason, the global thread pool has been made optional, so that volumes can still use the thread pool provided by io-threads. To enable it for bricks, the following option needs to be set: config.global-threading = on This option has no effect if bricks are already running. A restart is required to activate it. It's recommended to also enable the following option when running bricks with the global thread pool: performance.iot-pass-through = on To enable it for a FUSE mount point, the option '--global-threading' must be added to the mount command. To change it, an umount and remount is needed. It's recommended to disable the following option when using global threading on a mount point: performance.client-io-threads = off To enable it for services managed by glusterd, glusterd needs to be started with option '--global-threading'. In this case all daemons, like self-heal, will be using the global thread pool. Currently it can only be enabled for bricks, FUSE mounts and glusterd services. The maximum number of threads for clients and bricks can be configured using the following options: config.client-threads config.brick-threads These options can be applied online and its effect is immediate most of the times. If one of them is set to 0, the maximum number of threads will be calcutated as #cores * 2. Some distributions use a very old userspace-rcu library (version 0.7) for this reason, some header files from version 0.10 have been copied into contrib/userspace-rcu and are used if the detected version is 0.7 or older. An additional change has been made to io-threads to prevent that threads are started when iot-pass-through is set. Change-Id: I09d19e246b9e6d53c6247b29dfca6af6ee00a24b updates: #532 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* mount/fuse: fix bug related to --auto-invalidation in mount scriptRaghavendra Gowdappa2019-02-091-1/+1
| | | | | | | | | | | | When "auto-invalidation" option was not specified for mount script, glusterfs cmdline ended with "--auto-invalidation=" option. This patch fixes that bug in mount script. Thanks to Amar for reporting it. Change-Id: Ie5cd4c6ffb3ac644d9d2b032035f914a935d05a8 Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> updates: bz#1664934
* fuse: correctly handle setxattr valuesXavi Hernandez2019-02-071-4/+16
| | | | | | | | | | The setxattr function receives a pointer to raw data, which may not be null-terminated. When this data needs to be interpreted as a string, an explicit null termination needs to be added before using the value. Change-Id: Id110f9b215b22786da5782adec9449ce38d0d563 updates: bz#1193929 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* mount/fuse: expose auto-invalidation as a mount optionRaghavendra Gowdappa2019-02-023-10/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Auto invalidation is necessary when same (meta)data is shared/access across multiple mounts. However, if (meta)data is not shared, all relevant I/O goes through the cache of single mount and hence is coherent with (meta)data on bricks always. So, fuse-auto-invalidation can be disabled for this case which gives a huge performance boost for workloads that write data and then immediately read the data they just wrote. From glusterfs --help, <snip> --auto-invalidation[=BOOL] controls whether fuse-kernel can auto-invalidate attribute, dentry and page-cache. Disable this only if same files/directories are not accessed across two different mounts concurrently [default: "on"] </snip> Details on how disabling auto-invalidation helped to reduce pgbench init times can be found at [1]. Time taken for pgbench init of scale 8000 was 8340s. That will be an improvement of 86% (59280s vs 8340s) with auto-invalidations turned off along with other optimizations. Just disabling auto-invalidation contributed 56% improvement by reducing the total time taken by 33260s. [1] https://www.spinics.net/lists/gluster-devel/msg25907.html Change-Id: I0ed730dba9064bd9c576ad1800170a21e100e1ce Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> updates: bz#1664934
* fix 32-bit-build-smoke warningsIraj Jamali2019-01-111-1/+1
| | | | | | | fixes: bz#1622665 Change-Id: I777d67b1b62c284c62a02277238ad7538eef001e Signed-off-by: Iraj Jamali <ijamali@redhat.com>
* Revert "iobuf: Get rid of pre allocated iobuf_pool and use per thread mem pool"Amar Tumballi2019-01-081-1/+2
| | | | | | | | | This reverts commit b87c397091bac6a4a6dec4e45a7671fad4a11770. There seems to be some performance regression with the patch and hence recommended to have it reverted. Updates: #325 Change-Id: Id85d6203173a44fad6cf51d39b3e96f37afcec09
* multiple-files: clang-scan fixesAmar Tumballi2018-12-311-3/+12
| | | | | | updates: bz#1622665 Change-Id: I9f3a75ed9be3d90f37843a140563c356830ef945 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* iobuf: Get rid of pre allocated iobuf_pool and use per thread mem poolPoornima G2018-12-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation of iobuf_pool has two problems: - prealloc of 12.5MB memory, this limits the scale factor of the gluster processes due to RAM requirements - lock contention, as the current implementation has one global iobuf_pool lock. Credits for debugging and addressing the same goes to Krutika Dhananjay <kdhananj@redhat.com>. Issue: #410 Hence changing the iobuf implementation to use per thread mem pool. This may theoritically appear to cause perf dip as there is no preallocation. But per thread mem pool will not have significant perf impact as the last allocated memory is kept alive for subsequent allocs, for some time. The worst case would be if iobufs requested are of random sizes each time. The best case is, if we get iobuf request of the same size. From the perf tests, this patch did not seem to cause any perf decrease. Note that, with this patch, the rdma performance is going to degrade drastically. In one of the previous patchsets we had fixes to not degrade rdma perf, but rdma is not supported and also not tested [1]. Hence the decision was to not have code in rdma that is not tested and not supported. [1] https://lists.gluster.org/pipermail/gluster-users.old/2018-July/034400.html Updates: #325 Change-Id: Ic2ef3bd498f9250dea25f25ba0c01fde19584b27 Signed-off-by: Poornima G <pgurusid@redhat.com>
* fuse: SETLKW interruptCsaba Henk2018-12-141-0/+130
| | | | | | | | | Use the (f)getxattr based clearlocks interface to interrupt a pending lock request. updates: #465 Change-Id: I4e91a4d8791fc688fed400a02de4c53487e61be2 Signed-off-by: Csaba Henk <csaba@redhat.com>
* fuse: add --lru-limit optionAmar Tumballi2018-12-143-51/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The inode LRU mechanism is moot in fuse xlator (ie. there is no limit for the LRU list), as fuse inodes are referenced from kernel context, and thus they can only be dropped on request of the kernel. This might results in a high number of passive inodes which are useless for the glusterfs client, causing a significant memory overhead. This change tries to remedy this by extending the LRU semantics and allowing to set a finite limit on the fuse inode LRU. A brief history of problem: When gluster's inode table was designed, fuse didn't have any 'invalidate' method, which means, userspace application could never ask kernel to send a 'forget()' fop, instead had to wait for kernel to send it based on kernel's parameters. Inode table remembers the number of times kernel has cached the inode based on the 'nlookup' parameter. And 'nlookup' field is not used by no other entry points (like server-protocol, gfapi etc). Hence the inode_table of fuse module always has to have lru-limit as '0', which means no limit. GlusterFS always had to keep all inodes in memory as kernel would have had a reference to it. Again, the reason for this is, kernel's glusterfs inode reference was pointer of 'inode_t' structure in glusterfs. As it is a pointer, we could never free it (to prevent segfault, or memory corruption). Solution: In the inode table, handle the prune case of inodes with 'nlookup' differently, and call a 'invalidator' method, which in this case is fuse_invalidate(), and it sends the request to kernel for getting the forget request. When the kernel sends the forget, it means, it has dropped all the reference to the inode, and it will send the forget with the 'nlookup' parameter too. We just need to make sure to reduce the 'nlookup' value we have when we get forget. That automatically cause the relevant prune to happen. Credits: Csaba Henk, Xavier Hernandez, Raghavendra Gowdappa, Nithya B fixes: bz#1560969 Change-Id: Ifee0737b23b12b1426c224ec5b8f591f487d83a2 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* copy_file_range support in GlusterFSRaghavendra Bhat2018-12-122-0/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * libglusterfs changes to add new fop * Fuse changes: - Changes in fuse bridge xlator to receive and send responses * posix changes to perform the op on the backend filesystem * protocol and rpc changes for sending and receiving the fop * gfapi changes for performing the fop * tools: glfs-copy-file-range tool for testing copy_file_range fop - Although, copy_file_range support has been added to the upstream fuse kernel module, no release has been made yet of a kernel which contains the support. It is expected to come in the upcoming release of linux-4.20 So, as of now, executing copy_file_range fop on a fused based filesystem results in fuse kernel module sending read on the source fd and write on the destination fd. Therefore a small gfapi based tool has been written to be able test the copy_file_range fop. This tool is similar (in functionality) to the example program given in copy_file_range man page. So, running regular copy_file_range on a fuse mount point and running gfapi based glfs-copy-file-range tool gives some idea about how fast, the copy_file_range (or reflink) can be. On the local machine this was the result obtained. mount -t glusterfs workstation:new /mnt/glusterfs [root@workstation ~]# cd /mnt/glusterfs/ [root@workstation glusterfs]# ls file [root@workstation glusterfs]# cd [root@workstation ~]# time /tmp/a.out /mnt/glusterfs/file /mnt/glusterfs/new real 0m6.495s user 0m0.000s sys 0m1.439s [root@workstation ~]# time glfs-copy-file-range $(hostname) new /tmp/glfs.log /file /rrr OPEN_SRC: opening /file is success OPEN_DST: opening /rrr is success FSTAT_SRC: fstat on /rrr is success copy_file_range successful real 0m0.309s user 0m0.039s sys 0m0.017s This tool needs following arguments 1) hostname 2) volume name 3) log file path 4) source file path (relative to the gluster volume root) 5) destination file path (relative to the gluster volume root) "glfs-copy-file-range <hostname> <volume> <log file path> <source> <destination>" - Added a testcase as well to run glfs-copy-file-range tool * io-stats changes to capture the fop for profiling * NOTE: - Added conditional check to see whether the copy_file_range syscall is available or not. If not, then return ENOSYS. - Added conditional check for kernel minor version in fuse_kernel.h and fuse-bridge while referring to copy_file_range. And the kernel minor version is kept as it is. i.e. 24. Increment it in future when there is a kernel release which contains the support for copy_file_range fop in fuse kernel module. * The document which contains a writeup on this enhancement can be found at https://docs.google.com/document/d/1BSILbXr_knynNwxSyyu503JoTz5QFM_4suNIh2WwrSc/edit Change-Id: I280069c814dd21ce6ec3be00a884fc24ab692367 updates: #536 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* all: add xlator_api to many translatorsAmar Tumballi2018-12-061-0/+14
| | | | | | Fixes: #164 Change-Id: I93ad6f0232a1dc534df099059f69951e1339086f Signed-off-by: Amar Tumballi <amarts@redhat.com>
* libglusterfs: Move devel headers under glusterfs directoryShyamsundarR2018-12-053-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | libglusterfs devel package headers are referenced in code using include semantics for a program, this while it works can be better especially when dealing with out of tree xlator builds or in general out of tree devel package usage. Towards this, the following changes are done, - moved all devel headers under a glusterfs directory - Included these headers using system header notation <> in all code outside of libglusterfs - Included these headers using own program notation "" within libglusterfs This change although big, is just moving around the headers and making it correct when including these headers from other sources. This helps us correctly include libglusterfs includes without namespace conflicts. Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b Updates: bz#1193929 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* core: fix strncpy warningsKaleb S. KEITHLE2018-11-152-2/+2
| | | | | | | | | | | | | | | | | | | Since gcc-8.2.x (fedora-28 or so) gcc has been emitting warnings about buggy use of strncpy. e.g. warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length and warning: ‘strncpy’ specified bound depends on the length of the source argument Since we're copying string fragments and explicitly null terminating use memcpy to silence the warning Change-Id: I413d84b5f4157f15c99e9af3e154ce594d5bcdc1 updates: bz#1193929 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* fuse: diagnostic FLUSH interruptCsaba Henk2018-11-063-2/+69
| | | | | | | | | | | | | | | | | | | We add dummy interrupt handling for the FLUSH fuse message. It can be enabled by the "--fuse-flush-handle-interrupt" hidden command line option, or "-ofuse-flush-handle-interrupt=yes" mount option. It serves no other than diagnostic & demonstational purposes -- to exercise the interrupt handling framework a bit and to give an usage example. Documentation is also provided that showcases interrupt handling via FLUSH. Change-Id: I522f1e798501d06b74ac3592a5f73c1ab0590c60 updates: #465 Signed-off-by: Csaba Henk <csaba@redhat.com>
* fuse: interrupt handling frameworkCsaba Henk2018-11-063-1/+512
| | | | | | | | | | | | | | | | | | | | - add sub-framework to send timed responses to kernel - add interrupt handler queue - implement INTERRUPT fuse_interrupt looks up handlers for interrupted messages in the queue. If found, it invokes the handler function. Else responds with EAGAIN with a delay. See spec at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/filesystems/fuse.txt?h=v4.17#n148 and explanation in comments. Change-Id: I1a79d3679b31f36e14b4ac8f60b7f2c1ea2badfb updates: #465 Signed-off-by: Csaba Henk <csaba@redhat.com>
* all: fix the format string exceptionsAmar Tumballi2018-11-051-3/+3
| | | | | | | | | | | | | | | | Currently, there are possibilities in few places, where a user-controlled (like filename, program parameter etc) string can be passed as 'fmt' for printf(), which can lead to segfault, if the user's string contains '%s', '%d' in it. While fixing it, makes sense to make the explicit check for such issues across the codebase, by making the format call properly. Fixes: CVE-2018-14661 Fixes: bz#1644763 Change-Id: Ib547293f2d9eb618594cbff0df3b9c800e88bde4 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* mount.glusterfs: A more explicit check to avoid identical mountsHan Han2018-10-241-1/+1
| | | | | | | | | | | Change check condition from "[[:space:]+]${mount_point}[[:space:]+]fuse" to "[[:space:]+]${mount_point}[[:space:]+]fuse.glusterfs". Fix false postive check result for mount points of other FUSEes, such as "fuse.sshfs". Change-Id: I13898b50a651a8f5ecc3a94d01b3b5de37ec4cbc fixes: bz#1640026 Signed-off-by: Han Han <hhan@redhat.com>
* mount/fuse: return ESTALE instead of ENOENT on all inode based operationsRaghavendra Gowdappa2018-10-201-2/+115
| | | | | | | | | | | | | | | | | | | | This patch is continuation of commit fb4b914ce84bc83a5f418719c5ba7c25689a9251. This patch extends that logic to all inode based operations and not just open(dir). <snip> mount/fuse: never fail open(dir) with ENOENT open(dir) being an operation on inode should never fail with ENOENT. If gfid is not present, the appropriate error is ESTALE. This will enable kernel to retry open after a revalidate lookup. </snip> Change-Id: I6313f520827e9af725485631cb6a9d9718243bc4 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Fixes: bz#1627620
* all: fix warnings on non 64-bits architecturesXavi Hernandez2018-10-101-1/+1
| | | | | | | | | | When compiling in other architectures there appear many warnings. Some of them are actual problems that prevent gluster to work correctly on those architectures. Change-Id: Icdc7107a2bc2da662903c51910beddb84bdf03c0 fixes: bz#1632717 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* fuse: prevent error message "can't shift that many"Niels de Vos2018-10-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | On systems where /bin/sh is not Bash, running plain mount.glusterfs gives the unhelpful error "can't shift that many". The argument parsing can be a little improved. Adding a check for the number of arguments, minimal two (Gluster ip:/volume, and mountpoint), but possibly more (-o, -v etc.). With the additional check, running 'mount.glusterfs -h' now shows the following messags: Usage: /sbin/mount.glusterfs <server>:<volume/subdir> <mountpoint> -o<options> Options: man 8 mount.glusterfs To display the version number of the mount helper: /sbin/mount.glusterfs -V Change-Id: I50e3ade0c6217fab4155f35ad8cb35d99d52e133 Fixes: bz#1564890 Reported-by: Alexander Zimmermann <alexander.zimmermann96@gmail.com> Signed-off-by: Niels de Vos <ndevos@redhat.com>
* Land part 2 of clang-format changesGluster Ant2018-09-123-5816/+5624
| | | | | Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4 Signed-off-by: Nigel Babu <nigelb@redhat.com>
* Land clang-format changesGluster Ant2018-09-122-361/+373
| | | | Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b
* mount/fuse: convert ENOENT to ESTALE in open(dir)_resumeRaghavendra G2018-09-111-0/+9
| | | | | | | | | | | | | | | | | | | | | | This patch is continuation of commit fb4b914ce84bc83a5f418719c5ba7c25689a9251. <snip> mount/fuse: never fail open(dir) with ENOENT open(dir) being an operation on inode should never fail with ENOENT. If gfid is not present, the appropriate error is ESTALE. This will enable kernel to retry open after a revalidate lookup. </snip> Earlier commit failed to fix codepath where error response is sent back on gfid resolution failures in fuse_open(dir)_resume. Current patch completes that work Change-Id: Ia07e3cece404811703c8cfbac9b402ca5fe98c1e Signed-off-by: Raghavendra G <rgowdapp@redhat.com> updates: bz#1627620
* Multiple files: calloc -> mallocYaniv Kaul2018-09-042-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xlators/storage/posix/src/posix-inode-fd-ops.c: xlators/storage/posix/src/posix-helpers.c: xlators/storage/bd/src/bd.c: xlators/protocol/client/src/client-lk.c: xlators/performance/quick-read/src/quick-read.c: xlators/performance/io-cache/src/page.c xlators/nfs/server/src/nfs3-helpers.c xlators/nfs/server/src/nfs-fops.c xlators/nfs/server/src/mount3udp_svc.c xlators/nfs/server/src/mount3.c xlators/mount/fuse/src/fuse-helpers.c xlators/mount/fuse/src/fuse-bridge.c xlators/mgmt/glusterd/src/glusterd-utils.c xlators/mgmt/glusterd/src/glusterd-syncop.h xlators/mgmt/glusterd/src/glusterd-snapshot.c xlators/mgmt/glusterd/src/glusterd-rpc-ops.c xlators/mgmt/glusterd/src/glusterd-replace-brick.c xlators/mgmt/glusterd/src/glusterd-op-sm.c xlators/mgmt/glusterd/src/glusterd-mgmt.c xlators/meta/src/subvolumes-dir.c xlators/meta/src/graph-dir.c xlators/features/trash/src/trash.c xlators/features/shard/src/shard.h xlators/features/shard/src/shard.c xlators/features/marker/src/marker-quota.c xlators/features/locks/src/common.c xlators/features/leases/src/leases-internal.c xlators/features/gfid-access/src/gfid-access.c xlators/features/cloudsync/src/cloudsync-plugins/src/cloudsyncs3/src/libcloudsyncs3.c xlators/features/bit-rot/src/bitd/bit-rot.c xlators/features/bit-rot/src/bitd/bit-rot-scrub.c bxlators/encryption/crypt/src/metadata.c xlators/encryption/crypt/src/crypt.c xlators/performance/md-cache/src/md-cache.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible It doesn't make sense to calloc (allocate and clear) memory when the code right away fills that memory with data. It may be optimized by the compiler, or have a microscopic performance improvement. In some cases, also changed allocation size to be sizeof some struct or type instead of a pointer - easier to read. In some cases, removed redundant strlen() calls by saving the result into a variable. 1. Only done for the straightforward cases. There's room for improvement. 2. Please review carefully, especially for string allocation, with the terminating NULL string. Only compile-tested! .. and allocate memory as much as needed. xlators/nfs/server/src/mount3.c : Don't blindly allocate PATH_MAX, but strlen() the string and allocate appropriately. Also, align error messges. updates: bz#1193929 Original-Author: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: Ibda6f33dd180b7f7694f20a12af1e9576fe197f5
* performance/readdir-ahead: keep stats of cached dentries in sync with ↵Krutika Dhananjay2018-08-181-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | modifications PROBLEM: Stats of dentries that are readdirp'd ahead can become stale due to fops like writes, truncate etc that modify the file pointed by dentries. When a readdir is finally wound at offset corresponding to these entries, the iatts that are returned to the application come from readdir-ahead's cache, which are stale by now. This problem gets further aggravated when caching translators/modules cache and continue to serve this stale information. FIX: * Store the iatt in context of the inode pointed by dentry. * Whenever the inode pointed by dentry undergoes modification, in cbk of modification fop, update the iatt stored in inode-ctx to reflect the modification. * When serving a readdirp response from application, update iatts of dentries with the iatts stored in the context of inodes pointed by these dentries. * Some fops don't have valid iatts in their responses. For eg., write response whose data is still cached in write-behind will have zeroed out stat. In this case keep only ia_type and ia_gfid and reset rest of the iatt members to zero. - fuse-bridge in this case just sends "entry" information back to kernel and attr is not sent. - gfapi sets entry->inode to NULL and zeroes out the entire stat * There is one tiny race between the entry creation and a readdirp on its parent dir, which could cause the inode-ctx setting and inode ctx reading to happen on two different inode objects. To prevent this, when entry->inode doesn't eqaul to linked_inode, - fuse-bridge is made to send only "entry" information without attributes - gfapi sets entry->inode to NULL and zeroes out the entire stat. Change-Id: Ia27ff49a61922e88c73a1547ad8aacc9968a69df BUG: 1390050 Updates: bz#1390050 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
* All: run codespell on the code and fix issues.Yaniv Kaul2018-07-221-1/+1
| | | | | | | | | | | | Please review, it's not always just the comments that were fixed. I've had to revert of course all calls to creat() that were changed to create() ... Only compile-tested! Change-Id: I7d02e82d9766e272a7fd9cc68e51901d69e5aab5 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-15 15:17:41 +0000