summaryrefslogtreecommitdiffstats
path: root/xlators/protocol/client
Commit message (Collapse)AuthorAgeFilesLines
* protocol: Remove lock recovery logic from client and serverAnoop C S2018-01-295-589/+14
| | | | | | Change-Id: I27f5e1e34fe3eac96c7dd88e90753fb5d3d14550 BUG: 1272030 Signed-off-by: Anoop C S <anoopcs@redhat.com>
* protocol: make on-wire-change of protocol using new XDR definition.Amar Tumballi2018-01-197-295/+9029
| | | | | | | | | | | | | | | | | | | | | | With this patchset, some major things are changed in XDR, mainly: * Naming: Instead of gfs3/gfs4 settle for gfx_ for xdr structures * add iattx as a separate structure, and add conversion methods * the *_rsp structure is now changed, and is also reduced in number (ie, no need for different strucutes if it is similar to other response). * use proper XDR methods for sending dict on wire. Also, with the change of xdr structure, there are changes needed outside of xlator protocol layer to handle these properly. Mainly because the abstraction was broken to support 0-copy RDMA with payload for write and read FOP. This made transport layer know about the xdr payload, hence with the change of xdr payload structure, transport layer needed to know about the change. Updates #384 Change-Id: I1448fbe9deab0a1b06cb8351f2f37488cefe461f Signed-off-by: Amar Tumballi <amarts@redhat.com>
* rpc/*: auth-header changesAmar Tumballi2018-01-171-10/+15
| | | | | | | | | | | | | | | | | Introduce another authentication header which can now send more data. This is useful because this data can be common for all the fops, and we don't need to change all the signatures. As part of this, made rpc-clnt.c little more modular to support multiple authentication structures. stack.h changes are placeholder for the ctime etc, can be moved later based on need. updates #384 Change-Id: I6111c13cfd2ec92e2b4e9295896bf62a8a33b2c7 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* locks: added inodelk/entrylk contention upcall notificationsXavier Hernandez2018-01-162-1/+100
| | | | | | | | | | | | | | The locks xlator now is able to send a contention notification to the current owner of the lock. This is only a notification that can be used to improve performance of some client side operations that might benefit from extended duration of lock ownership. Nothing is done if the lock owner decides to ignore the message and to not release the lock. For forced release of acquired resources, leases must be used. Change-Id: I7f1ad32a0b4b445505b09908a050080ad848f8e0 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
* protocol/client: reduce lock contentionZhang Huan2017-12-266-58/+53
| | | | | | | | | | | | Current use of a per-client mutex to protect fdctx introduces lock contentions when there are dozens of file operations active. Use finer grain spinlock to reduce contention, and put retrieving fdctx out of lock. Change-Id: Iea3e2eb481e76a5d73a582ba81529180c5b88248 BUG: 1519598 Signed-off-by: Zhang Huan <zhanghuan@open-fs.com>
* all: Simplify component message id's definitionXavier Hernandez2017-12-141-634/+78
| | | | | | | | | This patch creates a new way of defining message id's that is easier and less error prone because it doesn't require so many manual changes each time a new component is defined or a new message created. Change-Id: I71ba8af9ac068f5add7e74f316a2478bc991c67b Signed-off-by: Xavier Hernandez <jahernan@redhat.com>
* glusterfs: Use gcc builtin ATOMIC operator to increase/decreate refcount.Mohit Agrawal2017-12-122-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In glusterfs code base we call mutex_lock/unlock to take reference/dereference for a object.Sometime it could be reason for lock contention also. Solution: There is no need to use mutex to increase/decrease ref counter, instead of using mutex use gcc builtin ATOMIC operation. Test: I have not observed yet how much performance gain after apply this patch specific to glusterfs but i have tested same with below small program(mutex and atomic both) and get good difference. static int numOuterLoops; static void * threadFunc(void *arg) { int j; for (j = 0; j < numOuterLoops; j++) { __atomic_add_fetch (&glob, 1,__ATOMIC_ACQ_REL); } return NULL; } int main(int argc, char *argv[]) { int opt, s, j; int numThreads; pthread_t *thread; int verbose; int64_t n = 0; if (argc < 2 ) { printf(" Please provide 2 args Num of threads && Outer Loop\n"); exit (-1); } numThreads = atoi(argv[1]); numOuterLoops = atoi (argv[2]); if (1) { printf("\tthreads: %d; outer loops: %d;\n", numThreads, numOuterLoops); } thread = calloc(numThreads, sizeof(pthread_t)); if (thread == NULL) { printf ("calloc error so exit\n"); exit (-1); } __atomic_store (&glob, &n, __ATOMIC_RELEASE); for (j = 0; j < numThreads; j++) { s = pthread_create(&thread[j], NULL, threadFunc, NULL); if (s != 0) { printf ("pthread_create failed so exit\n"); exit (-1); } } for (j = 0; j < numThreads; j++) { s = pthread_join(thread[j], NULL); if (s != 0) { printf ("pthread_join failed so exit\n"); exit (-1); } } printf("glob value is %ld\n",__atomic_load_n (&glob,__ATOMIC_RELAXED)); exit(0); } time ./thr_count 800 800000 threads: 800; outer loops: 800000; glob value is 640000000 real 1m10.288s user 0m57.269s sys 3m31.565s time ./thr_count_atomic 800 800000 threads: 800; outer loops: 800000; glob value is 640000000 real 0m20.313s user 1m20.558s sys 0m0.028 Change-Id: Ie5030a52ea264875e002e108dd4b207b15ab7cc7 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* rio/everywhere: add icreate/namelink fopSusant Palai2017-12-052-0/+254
| | | | | | | | | | | | | | | | | | | | | icreate creates inode, while namelink links the basename to it's parent gfid. For now mkdir is the primary user of these fops. Better distribution is acheived by creating the inode on ,(say) mds1 and linking the basename to it's parent gfid on mds2. The inode serves readdirp, stat etc. More details about the fops are present at: https://review.gluster.org/#/c/13395/3/design/DHT2/DHT2_Icreate_Namelink_Notes.md This backport of three patches from experimental branch. 1- https://review.gluster.org/#/c/18085/ 2- https://review.gluster.org/#/c/18086/ 3- https://review.gluster.org/#/c/18094/ Updates gluster/glusterfs#243 Change-Id: I1bd3d5a441a3cfab1acfeb52f15c6c867d362592 Signed-off-by: Susant Palai <spalai@redhat.com>
* protocol/client: Update xlator options tableKaushal M2017-11-281-13/+32
| | | | | | | Updates #302 Change-Id: Ia78e5d8f7b9ee6410965296808ad316c3cfb1d61 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* rpc : Change the way client uuid is builtPoornima G2017-11-201-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Today the main users of client uuid are protocol layers, locks, leases. Protocol layers requires each client uuid to be unique, even across connects and disconnects. Locks and leases on the server side also use the same client uid which changes across file migrations. Which makes the graph switch and file migration tedious for locks and leases. file migration across bricks becomes difficult as client uuid for the same client, is different on the other brick. The exact set of issues exists for leases as well. Solution would be to introduce a constant in the client-uid string which the locks and leases can use to identify the owner client across bricks. Client uuid currently: %s(ctx uuid)-%s(protocol client name)-%d(graph id)%s(setvolume count/reconnect count) Proposed Client uuid: "CTX_ID:%s-GRAPH_ID:%d-PID:%d-HOST:%s-PC_NAME:%s-RECON_NO:%s" - CTX_ID: This is will be constant per client. - GRAPH_ID, PID, HOST, PC_NAME(protocol client name), RECON_NO(setvolume count) remains the same. Change-Id: Ia81d57a9693207cd325d7b26aee4593fcbd6482c BUG: 1369028 Signed-off-by: Susant Palai <spalai@redhat.com>
* Coverity Issue: PW.INCLUDE_RECURSION in several filesGirjesh Rajoria2017-11-091-1/+0
| | | | | | | | | | | | | | Coverity ID: 407, 408, 409, 410, 411, 412, 413, 414, 415, 416, 417, 418, 419, 423, 424, 425, 426, 427, 428, 429, 436, 437, 438, 439, 440, 441, 442, 443 Issue: Event include_recursion Removed redundant, recursive includes from the files. Change-Id: I920776b1fa089a2d4917ca722d0075a9239911a7 BUG: 789278 Signed-off-by: Girjesh Rajoria <grajoria@redhat.com>
* rpc: bring a new protocol versionAmar Tumballi2017-11-072-0/+175
| | | | | | | | | | * xdr: add gfid to on wire format for fsetattr/rchecksum * as it is change in on wire XDR format, needed backward compatible RPC programs. Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 827334 Change-Id: Id0a2da3632516dc1a5560dde2b151b2e5f0be8e5
* xlators/client-rpc-fops: Fix Coverity IssuesMohammed Azhar Padariyakam2017-11-061-2/+2
| | | | | | | | | | | | | | | | | | Coverity Id: 803, 804 from [1] Problem: USE_AFTER_FREE code at client3_3_lookup: 3371 USE_AFTER_FREE at client3_3_readdir: 5562 Solution: Postponed iobuf_unref(rsp_iobuf) to a location after all dereferences of rsp_iobuf [1]:https://download.gluster.org/pub/gluster/glusterfs/static-analysis/master/glusterfs-coverity/2017-10-30-9aa574a5/html/ Change-Id: I34f90d72b1248e5526ff1d2b3273cdab619cf4f8 BUG: 789278 Signed-off-by: Mohammed Azhar Padariyakam <mpadariy@redhat.com>
* xlators/client-rpc-fops: Fix Coverity IssuesMohammed Azhar Padariyakam2017-11-061-23/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Coverity Id: 557,175,177,184,711,182,180,181,178 from [1] Problem: Unreachable code at client3_3_fgetxattr: 4771 Unreachable code at client3_3_fxattrop: 5087 Unreachable code at client3_3_getxattr: 4890 Unreachable code at client3_3_lookup: 3412 Unreachable code at client3_3_readdir: 5604 Unreachable code at client3_3_readdirp: 5704 Unreachable code at client3_3_xattrop: 4982 NULL checking deref ptr at client3_3_compound: 6045 Unused Value for op_errno at client3_3_getxattr: 4859 Solution: Removed The Unreachable Dead Code Removed NULL Check of dereferenced pointer Removed assignment of op_errno which is overwritten later [1]:https://download.gluster.org/pub/gluster/glusterfs/static-analysis/master/glusterfs-coverity/2017-10-30-9aa574a5/html/ Change-Id: Ie26a026dd1475c892faf00dd844bf38092e0a780 BUG: 789278 Signed-off-by: Mohammed Azhar Padariyakam <mpadariy@redhat.com>
* core: make gf_boolean_t a C99 bool instead of an enumJeff Darcy2017-11-031-1/+4
| | | | | | | | | | | | This reduces the space used from four bytes to one, and allows new code to use familiar C99 types/values interoperably with our old cruft. It does *not* change current declarations or code; that will be left for a separate - much larger - patch. Updates: #80 Change-Id: I5baedd17d3fb05b38f0d8b8bb9dd62824475842e Signed-off-by: Jeff Darcy <jdarcy@fb.com>
* protocol/client: handle the subdir handshake properly for add-brickAmar Tumballi2017-10-291-1/+9
| | | | | | | | | There should be different way we handle handshake in case of subdir mount for the first time, and in case of subsequent graph changes. Change-Id: I2a7ba836433bb0a0f4a861809e2bb0d7fbc4da54 BUG: 1505323 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* Coverity issue fix: checked returnKartik_Burmee2017-10-041-1/+1
| | | | | | | | | | | issue:Calling "client_submit_request" without checking return value (as is done elsewhere 52 out of 58 times). function: client_fdctx_destroy Change-Id: I66a295dd114fc20f04eb1aca9a5b274df53be090 BUG: 789278 fix: typecasted function return value using void Signed-off-by: Kartik_Burmee <kburmee@redhat.com>
* protocol/client: Coverity Fix IDENTICAL_BRANCHES in client3_3_flush_cbkMohammed Azhar Padariyakam2017-09-291-2/+1
| | | | | | | | | | | | | | | Issue : The same code is executed when the condition "ret < 0" is true or false, because the code in the if-then branch and after the if statement is identical. Solution : Remove the if-condition whose output does not alter the program flow of control Fix : The identical branching condition was removed. Change-Id: Iae40f068e5a03946273e1091886ba7011460fcc8 BUG: 789278 Signed-off-by: Mohammed Azhar Padariyakam <mpadariy@redhat.com>
* Infra to indentify processhari gowtham2017-08-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: currently we can't identify which process is running and how many instances of it are available. Fix: name the process when its spawned and send it to the server and save it in the client_t The processes that abide by this change from this patch are: 1) fuse mount, 2) rebalance, 3) selfheal, 4) tier, 5) quota, 6) snapshot, 7) brick. 8) gfapi (by default. gfapi.<processname> if processname is found) Note: fuse gets a process name as native-fuse-client by default. If the user gives a name for the fuse and spawns it, it will be of this type --process-name native-fuse-client.<name_specified>. This can be made use by the process like aux mount done by quota, geo-rep, etc by adding another option in the aux mount " -o process-name=gsync_mount" Updates: #178 Signed-off-by: hari gowtham <hgowtham@redhat.com> Change-Id: Ie4d02257216839338043737691753bab9a974d5e Reviewed-on: https://review.gluster.org/17957 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterfsd: allow subdir mountAmar Tumballi2017-08-041-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: 1. Take subdir mount option in client (mount.gluster / glusterfsd) 2. Pass the subdir mount to server-handshake (from client-handshake) 3. Handle subdir-mount dir's lookup in server-first-lookup and handle all fops resolution accordingly with proper gfid of subdir 4. Change the auth/addr module to handle the multiple subdir entries in option, and valid parsing. How to use the feature: `# mount -t glusterfs $hostname:/$volname/$subdir /$mount_point` Or `# mount -t glusterfs $hostname:/$volname -osubdir_mount=$subdir /$mount_point` Option can be set like: `# gluster volume set <volname> auth.allow "/subdir1(192.168.1.*),/(192.168.10.*),/subdir2(192.168.8.*)"` Updates #175 Change-Id: I7ea57f76ddbe6c3862cfe02e13f89e8a39719e11 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/17141 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Remove uneeded gotos, as it jump to the next lineMichael Scherer2017-05-081-70/+0
| | | | | | | | | | | | | | | Found by coverity Signed-off-by: Michael Scherer <misc@redhat.com> Change-Id: I1fef09a427d18bbeb9af0bf4f5c82c77aa3c0d3d BUG: 789278 Reviewed-on: https://review.gluster.org/17195 Tested-by: Michael Scherer <misc@fedoraproject.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Smoke: Gluster Build System <jenkins@build.gluster.org>
* Halo Replication feature for AFR translatorKevin Vigor2017-05-022-46/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Halo Geo-replication is a feature which allows Gluster or NFS clients to write locally to their region (as defined by a latency "halo" or threshold if you like), and have their writes asynchronously propagate from their origin to the rest of the cluster. Clients can also write synchronously to the cluster simply by specifying a halo-latency which is very large (e.g. 10seconds) which will include all bricks. In other words, it allows clients to decide at mount time if they desire synchronous or asynchronous IO into a cluster and the cluster can support both of these modes to any number of clients simultaneously. There are a few new volume options due to this feature: halo-shd-latency: The threshold below which self-heal daemons will consider children (bricks) connected. halo-nfsd-latency: The threshold below which NFS daemons will consider children (bricks) connected. halo-latency: The threshold below which all other clients will consider children (bricks) connected. halo-min-replicas: The minimum number of replicas which are to be enforced regardless of latency specified in the above 3 options. If the number of children falls below this threshold the next best (chosen by latency) shall be swapped in. New FUSE mount options: halo-latency & halo-min-replicas: As descripted above. This feature combined with multi-threaded SHD support (D1271745) results in some pretty cool geo-replication possibilities. Operational Notes: - Global consistency is gaurenteed for synchronous clients, this is provided by the existing entry-locking mechanism. - Asynchronous clients on the other hand and merely consistent to their region. Writes & deletes will be protected via entry-locks as usual preventing concurrent writes into files which are undergoing replication. Read operations on the other hand should never block. - Writes are allowed from _any_ region and propagated from the origin to all other regions. The take away from this is care should be taken to ensure multiple writers do not write the same files resulting in a gfid split-brain which will require resolution via split-brain policies (majority, mtime & size). Recommended method for preventing this is using the nfs-auth feature to define which region for each share has RW permissions, tiers not in the origin region should have RO perms. TODO: - Synchronous clients (including the SHD) should choose clients from their own region as preferred sources for reads. Most of the plumbing is in place for this via the child_latency array. - Better GFID split brain handling & better dent type split brain handling (i.e. create a trash can and move the offending files into it). - Tagging in addition to latency as a means of defining which children you wish to synchronously write to Test Plan: - The usual suspects, clang, gcc w/ address sanitizer & valgrind - Prove tests Reviewers: jackl, dph, cjh, meyering Reviewed By: meyering Subscribers: ethanr Differential Revision: https://phabricator.fb.com/D1272053 Tasks: 4117827 Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1 BUG: 1428061 Signed-off-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: http://review.gluster.org/16099 Reviewed-on: https://review.gluster.org/16177 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol-client: Initialize the list_head before usingPoornima G2017-03-261-2/+4
| | | | | | | | | | | | | | | In client3_3_readdir(p)_cbk, in case of error conditions, it is possible that the list_head is used before initializing. Hence move the initialization before usage. Change-Id: Ie58902d079fdc58416d17b5fa5f61375decb1c99 BUG: 1435943 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16948 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rpc/clnt: remove locks while notifying CONNECT/DISCONNECTRaghavendra G2017-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Locking during notify was introduced as part of commit aa22f24f5db7659387704998ae01520708869873 [1]. The fix was introduced to fix out-of-order CONNECT/DISCONNECT events from rpc-clnt to parent xlators [2]. However as part of handling DISCONNECT protocol/client does unwind saved frames (with failure) waiting for responses. This saved_frames_unwind can be a costly operation and hence ideally shouldn't be included in the critical section of notifylock, as it unnecessarily delays the reconnection to same brick. Also, its not a good practise to pass control to other xlators holding a lock as it can lead to deadlocks. So, this patch removes locking in rpc-clnt while notifying parent xlators. To fix [2], two changes are present in this patch: * notify DISCONNECT before cleaning up rpc connection (same as commit a6b63e11b7758cf1bfcb6798, patch [3]). * protocol/client uses rpc_clnt_cleanup_and_start, which cleans up rpc connection and does a start while handling a DISCONNECT event from rpc. Note that patch [3] was reverted as rpc_clnt_start called in quick_reconnect path of protocol/client didn't invoke connect on transport as the connection was not cleaned up _yet_ (as cleanup was moved post notification in rpc-clnt). This resulted in clients never attempting connect to bricks. Note that one of the neater ways to fix [2] (without using locks) is to introduce generation numbers to map CONNECT and DISCONNECTS across epochs and ignore DISCONNECT events if they don't belong to current epoch. However, this approach is a bit complex to implement and requires time. So, current patch is a hacky stop-gap fix till we come up with a more cleaner solution. [1] http://review.gluster.org/15916 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1386626 [3] http://review.gluster.org/15681 Change-Id: I62daeee8bb1430004e28558f6eb133efd4ccf418 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1427012 Reviewed-on: https://review.gluster.org/16784 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/client: Add gfid in request for better tcpdumpsPranith Kumar K2017-02-271-0/+2
| | | | | | | | | | | | | | | | | It is difficult to match opendir/releasedir or open/release calls without gfid associlation to find fd-leaks on the bricks. So assigning gfid also in the request which was already there in the on-wire format. BUG: 1425676 Change-Id: Iec908eeaa2f97295d45140a529b7f8fb834a1553 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: https://review.gluster.org/16706 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* libglusterfs, gfdb, glusterfs: Add missing breaksNigel Babu2017-02-261-0/+1
| | | | | | | | | | | | | | | | A few switches did not have breaks causing fall throughs. Most of them have been fixed with fall through comments for those that are intentional. Change-Id: I84c85726b542f38504b50fefab5eba5dbcd27a07 BUG: 1424894 Signed-off-by: Nigel Babu <nigelb@redhat.com> Reviewed-on: https://review.gluster.org/16677 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* protocol/client: Fix double free of client fdctx destroyRavishankar N2017-02-133-34/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the race between fd re-open code and fd release code, both of which free the fd context due to a race in certain variable checks as explained below: 1. client process (shd in the case of this BZ) sends an opendir to its children (client xlators) which send the fop to the bricks to get a valid fd. 2. Client xlator loses connection to the brick. fdctx->remotefd is -1 3. Client re-establishes connection. After handshake, it reopens the dir and sets fdctx->remotefd to a valid fd in client3_3_reopendir_cbk(). 4. Meanwhile, shd sends a fd unref after it is done with the opendir. This triggers a releasedir (since fd->refcount becomes 0). 5. client3_3_releasedir() sees that fdctx-->remotefd is a valid number (i.e not -1), sets fdctx->released=1 and calls client_fdctx_destroy() 6. As a continuation of step3, client_reopen_done() is called by client3_3_reopendir_cbk(), which sees that fdctx->released==1 and again calls client_fdctx_destroy(). Depending on when step-5 does GF_FREE(fdctx), we may crash at any place in step-6 in client3_3_reopendir_cbk() when it tries to access fdctx->{whatever}. Change-Id: Ia50873d11763e084e41d2a1f4d53715438e5e947 BUG: 1418629 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16521 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* core: run many bricks within one glusterfsd processJeff Darcy2017-01-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/14763 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gluster: Typos in logs and commentsN Balachandran2017-01-191-1/+1
| | | | | | | | | | | | | | | Replaced 'recieve' with 'receive'. Change-Id: I4c1c9147db5437feb81e4c83ed074440aaa28e07 BUG: 1414645 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/16429 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> Tested-by: Manikandan Selvaganesh <manikandancs333@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: Add info on op-version for clients in vol status outputSamikshan Bairagya2017-01-121-0/+6
| | | | | | | | | | | | | | | | | | | | | Currently the `gluster volume status <VOLNAME|all> clients` command gives us the following information on clients: 1. Brick name 2. Client count for each brick 3. hostname:port for each client 4. Bytes read and written for each client There is no information regarding op-version for each client. This patch adds that to the output. Change-Id: Ib2ece93ab00c234162bb92b7c67a7d86f3350a8d BUG: 1409078 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/16303 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* socket: socket disconnect should wait for poller thread exitRajesh Joseph2016-12-211-2/+2
| | | | | | | | | | | | | | | | | | | | | When SSL is enabled or if "transport.socket.own-thread" option is set then socket_poller is run as different thread. Currently during disconnect or PARENT_DOWN scenario we don't wait for this thread to terminate. PARENT_DOWN will disconnect the socket layer and cleanup resources used by socket_poller. Therefore before disconnect we should wait for poller thread to exit. Change-Id: I71f984b47d260ffd979102f180a99a0bed29f0d6 BUG: 1404181 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/16141 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* client,server: Free xdr-allocated compound req/rsp arraysKrutika Dhananjay2016-12-201-1/+1
| | | | | | | | | | | Change-Id: I9e1829f4f73f001bba33005032e030f289e8d003 BUG: 1406252 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16210 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/client: Fix potential mem-leaksKrutika Dhananjay2016-12-162-4/+1
| | | | | | | | | | | | | | | Commit 93eaeb9c93be3232f24e840044d560f9f0e66f71 introduces leaks in INODELK callback where a dict is unserialized twice, leading to dict leaks. Change-Id: I219ccb2279f237ebc2e4fc366af4775a461929b8 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16156 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr, client: More mem-leak fixes in COMPOUND fop cbkKrutika Dhananjay2016-12-044-273/+168
| | | | | | | | | | | | | | | | | | | | | | Bugs found and fixed: 1. Use correct subvolume index in pre-op-writev compound cbk 2. Prevent use-after-free of local->compound_args members in compound fops cbk in protocol/client 3. Fix xdata and xattr leaks in client_process_response 4. Fix possible leak of xdata in client_pre_writev() in test mode. 5. Free req->compound_req_array.compound_req_array_val as well after freeing its members 6. Free tmp_rsp->flock.lk_owner.lk_owner_val in LK fop. Change-Id: I15b646d7d4e0e5cd4ea3d2d6452c815cf2eaf68f BUG: 1401218 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16020 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/client: Fix iobref and iobuf leaks in COMPOUND fopKrutika Dhananjay2016-11-161-1/+2
| | | | | | | | | | | Change-Id: I408879aa2bbd8ea176fbc0d0eba5567e5df1b2b3 BUG: 1395687 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15860 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* protocol/client: reduce memory usageN Balachandran2016-10-241-1/+1
| | | | | | | | | | | | | | | readdirp calls use a lot of memory in case of a large number of files. The dict->extra_free is not used here so free buf immediately. Change-Id: I097f5dde2df471f5834264152711110a3bdb7e9a BUG: 1380249 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/15593 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* compound fops: Fix file corruption issueKrutika Dhananjay2016-10-241-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Address of a local variable @args is copied into state->req in server3_3_compound (). But even after the function has gone out of scope, in server_compound_resume () this pointer is accessed and dereferenced. This patch fixes that. 2. Compound fops, by virtue of NOT having a vector sizer (like the one writev has), ends up having both the header and the data (in case one of its member fops is WRITEV) in the same hdr_iobuf. This buffer was not being preserved through the lifetime of the compound fop, causing it to be overwritten by a parallel write fop, even when the writev associated with the currently executing compound fop is yet to hit the desk, thereby corrupting the file's data. This is fixed by associating the hdr_iobuf with the iobref so its memory remains valid through the lifetime of the fop. 3. Also fixed a use-after-free bug in protocol/client in compound fops cbk, missed by Linux but caught by NetBSD. Finally, big thanks to Pranith Kumar K and Raghavendra Gowdappa for their help in debugging this file corruption issue. Change-Id: I6d5c04f400ecb687c9403a17a12683a96c2bf122 BUG: 1378778 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15654 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* protocol/client: fix op_errno handling, was unused variableKaleb S. KEITHLEY2016-09-151-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | see comment in patch set one. Match the general logic flow of the other fop-cbks and eliminate the unused variable and its associated warning also see comment in patch set seven, re: correct handling of client_process_response(); and the associated BZ https://bugzilla.redhat.com/show_bug.cgi?id=1376328 http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: I7421ba3550770acc5564b7d6aba3290e027591f2 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15482 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* protocol/client (no 4): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-24/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. BUG: 1369124 Change-Id: I7edef3c060b798fcb81d881caa04b346cef7a131 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@linux.keithley.org> Reviewed-on: http://review.gluster.org/15356 Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com>
* protocol/client (no 5): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-051-4/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. BUG: 1369124 Change-Id: Ic209b1291927c56f009544eadebdc51ba5f77475 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@linux.keithley.org> Reviewed-on: http://review.gluster.org/15357 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* protocol/client (no 2): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-052-7/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. BUG: 1369124 Change-Id: I54055b3b1038374b4e21432da48fdaeca2938289 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15339 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anuradha Talur <atalur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* protocol/client (no 1): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-052-4/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. BUG: 1369124 Change-Id: I8a24e3c02144860859d653ab7115895fb3066378 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15338 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* compound fops: Some fixes to compound fops frameworkAnuradha Talur2016-08-304-93/+287
| | | | | | | | | | | Change-Id: I808fd5f9f002a35bff94d310c5d61a781e49570b BUG: 1360169 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15010 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/client: Unserialize xdata even if lookup failsAnuradha Talur2016-08-172-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: AFR relies on xdata returned by lookup to determine if there are any files that need healing. This info is further used to optimize readdirp. In case of lookups with negative return value, client xlator was sending NULL xdata. Due to absence of xdata, AFR conservatively assumes that there are files that need healing, which is incorrect. Solution: Even in case of unsuccessful lookups, send the xdata received by protocol client so that higher xlators can get the info that they rely on. Change-Id: Id3a1023eb536180888eb2c0b39050000b76f7226 BUG: 1366284 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15120 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com> Tested-by: Poornima G <pgurusid@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/server: Fix client/server compatibilityAvra Sengupta2016-06-281-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | The 3.8 client expects a child_up key from the server indicating the status of the server translators. This key is not being sent by the servers running older versions, thereby breaking compatibility. With this patch we are treating the absence of the said key as an indication that the server trying to connect to this client is running an older version and hence in such a case we are setting conf->child_up as _gf_true explicitly. This should suffice in emulating the older behavior. Due to the nature of this bug, requiring two version to be reproducible, there are no testcases added for the same. Change-Id: I29e0a5c63b55380dc9db8e42852d7e95b64a2b2e BUG: 1350327 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14811 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.org>
* protocol: Add framework to send transaction id with recallPoornima G2016-06-101-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | Issue: The upcall(cache invalidation/recall) event is sent from the bricks to clients. In AFR/EC setup, it can so happen that all the bricks will send the upcall for the same event, and if AFR/EC doesn't filter out these duplicate notifications, the logic above cluster xlators can fail. Solution: Use transaction id to filter out duplicate notifications. This patch adds framework for duplicate notifications. AFR/EC can build up on this patch for deduping the notifications Change-Id: I66b08e63b8799bc5932f2b2545376138a5701168 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/14647 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/client: Reflect readv/writev changes in filter-O_DIRECT descriptionPranith Kumar K2016-05-311-4/+5
| | | | | | | | | | | | | | | | Commit 74837896c38bafdd862f164d147b75fcbb619e8f introduced filtering of O_DIRECT option even for readv/writev but the option description is not updated. Change-Id: I7c2b69fdb496ca27d1b06a458f2f3eab0d16d417 BUG: 1322214 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14441 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/ec: Use correct log levelsAshish Pandey2016-05-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | Problem : Misleading messages are getting logged in mount logs and bricks log. "Mismatching xdata" and "Heal failed" are getting logged Solution : Reduce the level of logs from INFO, WARNING and NOTICE to DEBUG level wherever applicable OR use fop_log_level to get proper log level. Change-Id: Ia824c71e75ab683d3cb8949e1966ea09c9ccce72 BUG: 1231224 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13266 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* core: Honour mandatory lock flags during lock migrationAnoop C S2016-05-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | lk_flags from posix_lock_t structure is the primary key used to differentiate locks as either advisory and mandatory type. During lock migration this field is not read in getactivelk() call path. So in order to copy the exact lock state from source to destination it is necessary to include lk_flags within lock_migration_info_t structure to maintain accurate state. This change also includes minor modifications to setactivelk() call to consider lk_flags during lock migration. Change-Id: I20a7b6b6a0f3bdac5734cce8a2cd2349eceff195 BUG: 1332501 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/14189 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Susant Palai <spalai@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-19 16:10:25 +0000