summaryrefslogtreecommitdiffstats
path: root/xlators/protocol/server/src/server-rpc-fops.c
Commit message (Collapse)AuthorAgeFilesLines
* core: run many bricks within one glusterfsd processJeff Darcy2017-02-011-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Backport of: > Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb > BUG: 1385758 > Reviewed-on: https://review.gluster.org/14763 Change-Id: I4bce9080f6c93d50171823298fdf920258317ee8 BUG: 1418091 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16496 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* client,server: Free xdr-allocated compound req/rsp arraysKrutika Dhananjay2016-12-201-0/+1
| | | | | | | | | | | Change-Id: I9e1829f4f73f001bba33005032e030f289e8d003 BUG: 1406252 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16210 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/server: capture offset in seekRavishankar N2016-11-281-0/+1
| | | | | | | | | | | | | | | | | | | | | Problem: http://review.gluster.org/11482 implemented seek FOP but http://review.gluster.org/#/c/14137/ 'undid' the change where we pack the offset returned by seek in server xlator before sending it to the client. As a result, seek always returns zero to the client for SEEK_HOLE/ SEEK_DATA. Fix: I think 14137 removed it unintentionally, hence adding it back again. Signed-off-by: Ravishankar N <ravishankar@redhat.com> Change-Id: I67a1f7b53214b043c5291f5704be4a50b698f91c BUG: 1398076 Reviewed-on: http://review.gluster.org/15920 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/server: Print pargfid in logs for rename errorPranith Kumar K2016-11-271-2/+2
| | | | | | | | | | | BUG: 1394548 Change-Id: I42ee627c8cdf54158f083f9019a096ace449e3cc Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15872 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* protocol/server: Remove unused variableAnoop C S2016-11-221-2/+0
| | | | | | | | | | | Change-Id: I0d0a786b2d02d4db37c4da6194ee4b4feac31b63 BUG: 1198849 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/15899 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/server: Print error-xlator namePranith Kumar K2016-11-161-182/+255
| | | | | | | | | | | | | | | | | | | | Problem: At the moment from which xlator the errors are stemming from is a mystery. Fix: With this patch we can find on the server side which xlator first gave the errno received by server xlator. I am not yet sure how to get this done for client side which has lot of copy_frame()s. May be another patch. Change-Id: Ie13307b965facf2a496123e81ce0bd6756f98ac9 BUG: 1394548 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15836 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* compound fops: Fix file corruption issueKrutika Dhananjay2016-10-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Address of a local variable @args is copied into state->req in server3_3_compound (). But even after the function has gone out of scope, in server_compound_resume () this pointer is accessed and dereferenced. This patch fixes that. 2. Compound fops, by virtue of NOT having a vector sizer (like the one writev has), ends up having both the header and the data (in case one of its member fops is WRITEV) in the same hdr_iobuf. This buffer was not being preserved through the lifetime of the compound fop, causing it to be overwritten by a parallel write fop, even when the writev associated with the currently executing compound fop is yet to hit the desk, thereby corrupting the file's data. This is fixed by associating the hdr_iobuf with the iobref so its memory remains valid through the lifetime of the fop. 3. Also fixed a use-after-free bug in protocol/client in compound fops cbk, missed by Linux but caught by NetBSD. Finally, big thanks to Pranith Kumar K and Raghavendra Gowdappa for their help in debugging this file corruption issue. Change-Id: I6d5c04f400ecb687c9403a17a12683a96c2bf122 BUG: 1378778 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15654 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* compound fops: Some fixes to compound fops frameworkAnuradha Talur2016-08-301-26/+38
| | | | | | | | | | | Change-Id: I808fd5f9f002a35bff94d310c5d61a781e49570b BUG: 1360169 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15010 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/server: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-271-15/+4
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I5a48055c4b0a4a07dd511ad4f2e9ef823b9c60b2 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15255 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/server: readlink rsp xdr will fail while readlink got an errorRyan Ding2016-08-241-0/+2
| | | | | | | | | | | | | | | | set gfs3_readlink_rsp.path with an empty string while error happen, to make xdr_gfs3_readlink_rsp happy. otherwise the original errno will be lost, and return an rpc internal errno instead. Change-Id: I36655b66df8b9f164e5bd21eb17244722c2f5a52 BUG: 1369530 Signed-off-by: Ryan Ding <ryan.ding@open-fs.com> Reviewed-on: http://review.gluster.org/15299 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/ec: Use correct log levelsAshish Pandey2016-05-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | Problem : Misleading messages are getting logged in mount logs and bricks log. "Mismatching xdata" and "Heal failed" are getting logged Solution : Reduce the level of logs from INFO, WARNING and NOTICE to DEBUG level wherever applicable OR use fop_log_level to get proper log level. Change-Id: Ia824c71e75ab683d3cb8949e1966ea09c9ccce72 BUG: 1231224 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13266 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/server: address double free'sPrasanna Kumar Kalever2016-05-021-4/+0
| | | | | | | | | | | | | Change-Id: Ic8a8fe85cf91c5c7aa93dce872cedbc67464e4ea BUG: 1227667 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/14150 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* protocol/server: Implementation of compound fopv3.9devAnuradha Talur2016-05-011-243/+248
| | | | | | | | | | | Change-Id: I981258afa527337dd2ad33eecba7fc8084238e6d BUG: 1303829 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/14137 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* protocol: add setactivelk () fopSusant Palai2016-05-011-1/+125
| | | | | | | | | | | Change-Id: I60fe2d59c454095febce4c0fbef87a2dad9636e4 BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/14013 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* protocol: add getactivelk () fopSusant Palai2016-05-011-0/+129
| | | | | | | | | | | Change-Id: Ie38198db990f133fe163ba160cdf647e34f83f4f BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/13994 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* Protocol: Add lease fopPoornima G2016-04-291-0/+111
| | | | | | | | | | | | Change-Id: I64c361d3e4ae86d57dc18bb887758d044c861237 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11597 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* dht/afr/client/posix: Fail mkdir without gfid-reqPranith Kumar K2016-04-291-2/+5
| | | | | | | | | | | | | | | Do not allow directory creations without gfids as after the directories are created, operations on them fail anyway. So it is better to fail mkdir. BUG: 1317361 Change-Id: I8f8e3b38bbded1960b7215bac0432500f7e78038 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13690 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* server: send lookup on root inode when itable is createdvmallika2016-03-301-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | * xlators like quota, marker, posix_acl can cause problems if inode-ctx are not created. sometime these xlarors may not get lookup on root inode with below cases 1) client may not send lookup on root inode (like NSR leader) 2) if the xlators on one of the bricks are not up, and client sending lookup during this time: brick can miss the lookup It is always better to make sure that there is one lookup on root. So send a first lookup when the inode table is created * When sending lookup on root, new inode is created, we need to use itable->root instead Change-Id: Iff2eeaa1a89795328833a7761789ef588f11218f BUG: 1320818 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13837 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol/server: Do not log ENOENT/ESTALE in fd based fopsPranith Kumar K2016-03-151-20/+30
| | | | | | | | | | | | | | | When fd-fops come on anon-fds there is a chance to log ENOENT/ESTALE for them. Log it as DEBUG. Change-Id: I8ae53c29d6a66f6a65081c281a9a5c205f53766b BUG: 1315168 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13621 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com>
* NSR: Volgen SupportJeff Darcy2016-02-081-2/+6
| | | | | | | | | | | | | | | | Allows the user to convert an afr-volume to a nsr-volume by using cluster.nsr option in the volume set command gluster volume set <volname> cluster.nsr <on/off> Change-Id: Ia1c5aa89d27535f7275d474cf312dc5efb8e222f BUG: 1158654 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/12943 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Avra Sengupta <asengupt@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* protocol: implement seek() FOPNiels de Vos2016-02-041-2/+123
| | | | | | | | | | | | | | | Network protocol extensions for the seek() FOP. The format is based on the SEEK procedure in NFSv4.2. Change-Id: I060768a8a4b9b1c80f4a24c0f17d630f7f028690 BUG: 1220173 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11482 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol/server : porting missing gf_log's to gf_msgManikandan Selvaganesh2015-08-261-4/+4
| | | | | | | | | Change-Id: I8818931fafea3c013551a5de23a9f77c81164841 BUG: 1252808 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/11895 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/server: forget the inodes which got ENOENT in lookupRaghavendra Bhat2015-08-201-22/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | If a looked up object is removed from the backend, then upon getting a revalidated lookup on that object ENOENT error is received. protocol/server xlator handles it by removing dentry upon which ENOENT is received. But the inode associated with it still remains in the inode table, and whoever does nameless lookup on the gfid of that object will be able to do it successfully despite the object being not present. For handling this issue, upon getting ENOENT on a looked up entry in revalidate lookups, protocol/server should forget the inode as well. Though removing files directly from the backend is not allowed, in case of objects corrupted due to bitrot and marked as bad by scrubber, objects are removed directly from the backend in case of replicate volumes, so that the object is healed from the good copy. For handling this, the inode of the bad object removed from the backend should be forgotten. Otherwise, the inode which knows the object it represents is bad, does not allow read/write operations happening as part of self-heal. Change-Id: I23b7a5bef919c98eea684aa1e977e317066cfc71 BUG: 1238188 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/11489 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: remove 'null' for directory/file path from brick log for many operationsSakshi2015-08-121-3/+6
| | | | | | | | | | Change-Id: I39cd2089240c0ad62b749f176847cc5337e57f73 BUG: 1231264 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/11206 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-291-5/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/client,server: Move EEXIST logs in mkdir and mknod to DEBUG levelKrutika Dhananjay2015-05-271-2/+2
| | | | | | | | | | Change-Id: I0481258de8da36cbee7c046f53b20359badaf064 BUG: 1221889 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/10791 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/server : port log messages to new framework.Manikandan Selvaganesh2015-04-291-80/+128
| | | | | | | | | | Change-Id: I7901f55d06716161cc31d2b79a600a16b5ec2ef8 BUG: 1194640 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/9874 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* Avoid conflict between contrib/uuid and system uuidEmmanuel Dreyfus2015-04-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterfs relies on Linux uuid implementation, which API is incompatible with most other systems's uuid. As a result, libglusterfs has to embed contrib/uuid, which is the Linux implementation, on non Linux systems. This implementation is incompatible with systtem's built in, but the symbols have the same names. Usually this is not a problem because when we link with -lglusterfs, libc's symbols are trumped. However there is a problem when a program not linked with -lglusterfs will dlopen() glusterfs component. In such a case, libc's uuid implementation is already loaded in the calling program, and it will be used instead of libglusterfs's implementation, causing crashes. A possible workaround is to use pre-load libglusterfs in the calling program (using LD_PRELOAD on NetBSD for instance), but such a mechanism is not portable, nor is it flexible. A much better approach is to rename libglusterfs's uuid_* functions to gf_uuid_* to avoid any possible conflict. This is what this change attempts. BUG: 1206587 Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10017 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* core: Add inode context merge callbackVenky Shankar2015-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain translators may require to update the inode context of an already linked inode before unwinding the call to the client. Normally, such a case in encountered during parallel operations when a fresh inode is chosen at call (wind) time. In the callback path, one of inodes is successfully linked in the inode table, thereby the other inodes being thrown away (and the inode pointers for these calls being pointed to the linked inode). Translators which may have strict dependency on the correct value in the inode context would get stale values in inode context. This patch introduces a new callback which provides gives translators an opportunity to "patch" their respective inode contexts. Note that, as of now, this callback is only invoked during create()s unwind path. Although this might needed to be done for all dentry fops and lookup, but let that be done as an when required (bitrot stub requires this *only* for create()). Change-Id: I6cd91c2af473c44d1511208060d3978e580c67a6 BUG: 1170075 Original-Author: Raghavendra Bhat <rabhat@redhat.com> Original-Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9913 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* every/where: add GF_FOP_IPC for inter-translator communicationJeff Darcy2015-03-171-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several features - e.g. encryption, erasure codes, or NSR - involve multiple cooperating translators which sometimes need a "private" means of communication amongst themselves. Historically we've used virtual or synthetic xattrs, but that's not very elegant and clutters up the getxattr/setxattr path which must also handle real xattr requests. This new fop should address that. The only argument is an int32_t "op" which should be recognized by the target translator. It is recommended that translators using these feature follow some convention regarding the ops that they define, to avoid conflicts. Using a hash of the target translator's type string as a base for a series of ops would probably be a good start. Any other information can be passed in both directions using xdata. The default behavior for this fop, as with any other, is to pass through to FIRST_CHILD. That makes use of this fop "transparent" to other translators that were written before it existed, but it also means that it only really works with pass-through translators. If a routing translator (such as DHT) or a fan-out translator (such as AFR) is involved, the IPC might not reach its intended destination unless those translators are modified to forward IPC fops along all paths. If an IPC gets all the way to storage/posix it is considered an error, much like an uncaught exception. We don't actually *do* anything in that case, but we do log it send back an EOPNOTSUPP error. This makes the "unrecognized opcode" condition distinguishable from the "no IPC support" condition (which would yield an RPC error instead) so clients can probe for the presence of a handler for their own favorite opcode and either use that or use old-school xattrs depending on the result. BUG: 1158628 Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I84af1b17babe5b30ec03ecf027ae37d09b873968 Reviewed-on: http://review.gluster.org/8812 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/server: Fix possible memory leaks of xdataXavier Hernandez2015-01-091-4/+13
| | | | | | | | | | | | | There was a memory leak of xdata argument in fops (f)setxattr, (f)xattrop and statfs. This leak was minor because xdata is rarely, or even not used at all, in this fops. Change-Id: Ie1083ae227755a11cf72f8d89595520a5afb3042 BUG: 1127653 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8434 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* logs: Do selective logging for errnosPranith Kumar K2014-10-201-35/+0
| | | | | | | | | | | | | | | | | | | | | Problem: Just after replace-brick the mount logs are filled with ENOENT/ESTALE warning logs because the file is yet to be self-healed now that the brick is new. Fix: Do conditional logging for the logs. ENOENT/ESTALE will be logged at lower log level. Only when debug logs are enabled, these logs will be written to the logfile. Change-Id: If203d09e2479e8c2415ebc14fb79d4fbb81dfc95 BUG: 1151303 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8918 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: statedump supportAtin Mukherjee2014-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although glusterd currently has statedump support but it doesn't dump its context information. Implementing glusterd_dump_priv function to export per-node glusterd information would be useful for debugging bugs. Once implemented, we could enhance sos-report to fetch this information. This would potentially reduce our time to root cause and data needed for debugability can be dumped gradually. Following is the main items of the dump list targeted in this patch : * Supported max/min op-version and current op-version * Information about peer list * Information about peer list involved while a transaction is going on (xaction_peers) * option dictionary in glusterd_conf_t * mgmt_v3_lock in glusterd_conf_t * List of connected clients * uuid of glusterd * A section of rpc related information like live connections and their statistics There are couple of issues which were found during implementation and testing phase: - xaction_peers of glusterd_conf_t was not initialized in init because of which traversing through this list head was crashing when there was no active transaction - gf_free was not setting the typestr to NULL if the the alloc count becomes 0 for a mem-type earlier allocated. Change-Id: Ic9bce2d57682fc1771cd2bc6af0b7316ecbc761f BUG: 1139682 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8665 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* protocol: Log ENODATA & ENOATTR logs at DEBUG loglevel in removexattr_cbk.Vijay Bellur2014-09-241-1/+7
| | | | | | | | | | | | | | | | | | | Prevents messages of the following type from being seen by default in the log files: [2014-09-19 07:57:39.877806] W [client-rpc-fops.c:1232:client3_3_removexattr_cbk] 0-<volume_name>-client-0: remote operation failed: No data available [2014-09-19 07:57:39.877963] W [client-rpc-fops.c:1232:client3_3_removexattr_cbk] 0-<volume_name>-client-1: remote operation failed: No data available Change-Id: I3b1a121b0fc272eb772547275bb8085ed19db5a1 BUG: 1144527 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/8781 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* user servicable snapshotsRaghavendra Bhat2014-05-291-2/+3
| | | | | | | | | | Change-Id: Idbf27dbe088e646a8ab81cedc5818413795895ea Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Anand Subramanian <anands@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/7700 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpcsvc: Validate RPC procedure number before fetchSantosh Kumar Pradhan2014-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | While accessing the procedures of given RPC program in, rpcsvc_get_program_vector_sizer(), It was not checking boundary conditions which would cause buffer overflow and subsequently SEGV. Make sure rpcsvc_actor_t arrays have numactors number of actors. FIX: Validate the RPC procedure number before fetching the actor. Special Thanks to: Murray Ketchion, Grant Byers Change-Id: I8b5abd406d47fab8fca65b3beb73cdfe8cd85b72 BUG: 1096020 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/7726 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client,server: Suppress ESTALE logsPranith Kumar K2014-05-161-61/+74
| | | | | | | | | | | Change-Id: I5c5e016138be2417eacf81812313dc854907fa47 BUG: 1095256 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/7696 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Ping timer implmentationKrishnan Parthasarathi2014-04-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch refactors the existing client ping timer implementation, and makes use of the common code for implementing both client ping timer and the glusterd ping timer. A new gluster rpc program for ping is introduced. The ping timer is only started for peers that have this new program. The deafult glusterd ping timeout is 30 seconds. It is configurable by setting the option 'ping-timeout' in glusterd.vol . Also, this patch introduces changes in the glusterd-handshake path. The client programs for a peer are now set in the callback of dump_versions, for both the older handshake and the newer op-version handshake. This is the only place in the handshake process where we know what programs a peer supports. Change-Id: I035815ac13449ca47080ecc3253c0a9afbe9016a BUG: 1038261 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5202 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-241-2/+2
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Reduce logging caused by non-existing extended attributesNiels de Vos2014-03-011-1/+3
| | | | | | | | | | | | | | | | | This changes the following log messages from INFO (default value) to DEBUG. We do not really care if someone tries to read extended attributes that do not exist. [2013-12-09 12:19:05.924497] E [posix.c:3539:posix_fgetxattr] 0-dis-rep-posix: fgetxattr failed on key system.posix_acl_access (No data available) [2013-12-09 12:19:05.924545] I [server-rpc-fops.c:863:server_fgetxattr_cbk] 0-dis-rep-server: 13074: FGETXATTR 1 (b8381953-ffa5-40fa-90dd-ae122335cc4b) (system.posix_acl_access) ==> (No data available) Change-Id: Idbbeb026f81e67025a2b36d7bfeb125ad2a1f61b BUG: 1027174 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7171 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol: pass the size of the data in the WRITE on-wire FOPNiels de Vos2014-01-241-0/+1
| | | | | | | | | | | | | | | | | | | | | Capturing GlusterFS traffic with tcpdump and displaying it in Wireshark shows that the size of all WRITEs are 0 bytes. It seems that the attribute is not used, and the size is calculated an other way. Even if the size attribute is not used (yet), it should be set correctly to prevent confusing while debugging network traffic with Wireshark or other tools. Note that the on-wire format is not being changed with this patch. The size is already part of the structure that is exchanged between the client and server. Change-Id: I9d67fe17bf203672116dea4948328e2af4004677 BUG: 1057264 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6766 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vikhyat Umrao <vumrao@redhat.com>
* protocol/server: Change log message severityVijay Bellur2013-12-271-2/+2
| | | | | | | | | Change-Id: Ia6aaf8a106c26fa7118c86fadb6805d2877bb6ee BUG: 849630 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6610 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* server/rpc: bricks goes offline and comes back online, with lots of "No such ↵Vikhyat Umrao2013-11-121-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | file or directory" log messages Problem: Messages were getting logged very frequently at log level INFO. [2013-03-01 11:34:28.029222] I [server3_1-fops.c:1541:server_open_cbk] vol-server: 993888: OPEN (null) (--) ==> -1 (No such file or directory) [2013-03-01 11:34:28.031579] I [server3_1-fops.c:252:server_inodelk_cbk] vol-server: 993896: INODELK (null) (--) ==> -1 (No such file or directory) [2013-03-01 11:34:28.034041] I [server3_1-fops.c:252:server_inodelk_cbk] vol-server: 993914: INODELK (null) (--) ==> -1 (No such file or directory) [2013-03-01 11:34:28.040435] I [server3_1-fops.c:1338:server_flush_cbk] vol-server: 993938: FLUSH -2 (--) ==> -1 (No such file or directory) Solution: Moved them to DEBUG log level if error number equlas to ENOENT else to ERROR log level. It will help in decreasing the size of log files at INFO log level. For server_open_cbk and for some other functions we already have a patch, below is the URL for it. URL- http://review.gluster.org/6241 This patch solves logging problem for functions server_inodelk_cbk and server_flush_cbk. Change-Id: I57372e851371e466f1674726015e28378b826f5f BUG: 1029372 Signed-off-by: Vikhyat Umrao<vumrao@redhat.com> Reviewed-on: http://review.gluster.org/6252 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* server/rpc: Numerous entries of error - "No such file or directory" in ↵Vikhyat Umrao2013-11-111-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bricks log Problem: Messages were getting logged very frequently at log level INFO. One of the log file snippet - [2013-10-27 00:05:01.501355] I [server3_1-fops.c:1707:server_stat_cbk] 0-vol-server: 24846575: STAT (null) (--) ==> -1 (No such file or directory) [2013-10-27 00:05:01.505101] I [server3_1-fops.c:1707:server_stat_cbk] 0-vol-server: 24846577: STAT (null) (--) ==> -1 (No such file or directory) [2013-10-27 00:05:01.507299] I [server3_1-fops.c:1707:server_stat_cbk] 0-vol-server: 24846578: STAT (null) (--) ==> -1 (No such file or directory) [2013-10-20 19:50:35.554563] I [server3_1-fops.c:1538:server_open_cbk] 0-vol-server: 18714687: OPEN <gfid:01c70ca0-1952-4e82-abee-a07205757d8e> (01c70ca0-1952-4e82-abee-a07205757d8e) ==> -1 (No such file or directory) [2013-10-20 19:50:35.555520] I [server3_1-fops.c:1538:server_open_cbk] 0-vol-server: 18714697: OPEN <gfid:01c70ca0-1952-4e82-abee-a07205757d8e> (01c70ca0-1952-4e82-abee-a07205757d8e) ==> -1 (No such file or directory) [2013-10-20 19:50:35.558292] I [server3_1-fops.c:1538:server_open_cbk] 0-vol-server: 18714712: OPEN (null) (--) ==> -1 (No such file or directory) Solution: Moved them to DEBUG log level if error number equlas to ENOENT else to ERROR log level. It will help in decreasing the size of log files at INFO log level. Change-Id: I23d74320c9c21bbce4805c20295556cc2cc0a8d8 BUG: 808073 Signed-off-by: Vikhyat Umrao <vumrao@redhat.com> Reviewed-on: http://review.gluster.org/6241 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterfs: zerofill supportM. Mohan Kumar2013-11-101-0/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in the specified range. This fop will be useful when a whole file needs to be initialized with zero (could be useful for zero filled VM disk image provisioning or during scrubbing of VM disk images). Client/application can issue this FOP for zeroing out. Gluster server will zero out required range of bytes ie server offloaded zeroing. In the absence of this fop, client/application has to repetitively issue write (zero) fop to the server, which is very inefficient method because of the overheads involved in RPC calls and acknowledgements. WRITESAME is a SCSI T10 command that takes a block of data as input and writes the same data to other blocks and this write is handled completely within the storage and hence is known as offload . Linux ,now has support for SCSI WRITESAME command which is exposed to the user in the form of BLKZEROOUT ioctl. BD Xlator can exploit BLKZEROOUT ioctl to implement this fop. Thus zeroing out operations can be completely offloaded to the storage device , making it highly efficient. The fop takes two arguments offset and size. It zeroes out 'size' number of bytes in an opened file starting from 'offset' position. This patch adds zerofill support to the following areas: - libglusterfs - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi Client applications can exloit this fop by using glfs_zerofill introduced in libgfapi.FUSE support to this fop has not been added as there is no system call for this fop. Changes from previous version 3: * Removed redundant memory failure log messages Changes from previous version 2: * Rebased and fixed build error Changes from previous version 1: * Rebased for latest master TODO : * Add zerofill support to trace xlator * Expose zerofill capability as part of gluster volume info Here is a performance comparison of server offloaded zeofill vs zeroing out using repeated writes. [root@llmvm02 remote]# time ./offloaded aakash-test log 20 real 3m34.155s user 0m0.018s sys 0m0.040s [root@llmvm02 remote]# time ./manually aakash-test log 20 real 4m23.043s user 0m2.197s sys 0m14.457s [root@llmvm02 remote]# time ./offloaded aakash-test log 25; real 4m28.363s user 0m0.021s sys 0m0.025s [root@llmvm02 remote]# time ./manually aakash-test log 25 real 5m34.278s user 0m2.957s sys 0m18.808s The argument log is a file which we want to set for logging purpose and the third argument is size in GB . As we can see there is a performance improvement of around 20% with this fop. Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18 BUG: 1028673 Signed-off-by: Aakash Lal Das <aakash@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5327 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* client_t: phase 2, refactor server_ctx and locks_ctx outKaleb S. KEITHLEY2013-10-311-449/+421
| | | | | | | | | | | | | | remove server_ctx and locks_ctx from client_ctx directly and store as into discrete entities in the scratch_ctx hooking up dump will be in phase 3 BUG: 849630 Change-Id: I94cea328326db236cdfdf306cb381e4d58f58d4c Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5678 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc/rpc-lib: rpcsvc should reply when rpc_err is setPranith Kumar K2013-09-111-176/+179
| | | | | | | | | | | | | | | | | | | | | Problem: When requests are received on a connection before setvolume is done, creating frame from the requests fail because there is no association of the transport with the conn(i.e. xl_private). xl_private is set only on set_volume. In such cases error response is not sent from server xlator to that request because of which operations on mount point are hanging. Fix: Set actor return value to RPCSVC_ACTOR_ERROR so that response is sent even in these cases. Change-Id: I74d7bc6849fde6c734008d67c1f4bc9d9f7a84f9 BUG: 1006367 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5892 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/locks : Improves debuggability of inode/entry locks.Anuradha Talur2013-09-031-0/+32
| | | | | | | | | | | | | | | | | Prints, in the statedump, the information about the mount that performed the inode/entry lk. For the entrylks that are granted after a blocked state, the blocked time is not printed. A patch for that will be sent later. Change-Id: Ib0c1ed21fa9328b435f96b590dd343f59814a08d BUG: 915629 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/5712 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs/client_t client_t implementation, phase 1Kaleb S. KEITHLEY2013-07-291-316/+277
| | | | | | | | | | | | | | | | | | | | | | | | Implementation of client_t The feature page for client_t is at http://www.gluster.org/community/documentation/index.php/Planning34/client_t In addition to adding libglusterfs/client_t.[ch] it also extracts/moves the locktable functionality from xlators/protocol/server to libglusterfs, where it is used; thus it may now be shared by other xlators too. This patch is large as it is. Hooking up the state dump is left to do in phase 2 of this patch set. (N.B. this change/patch-set supercedes previous change 3689, which was corrupted during a rebase. That change will be abandoned.) BUG: 849630 Change-Id: I1433743190630a6d8119a72b81439c0c4c990340 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/3957 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* protocol/server: Initialize connection variablePranith Kumar K2013-06-271-0/+2
| | | | | | | | | Change-Id: I46badd812e9b936911ddd2793cef7ce30ec220a6 BUG: 979237 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5266 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
generated by cgit (git 2.34.1) at 2024-11-18 23:57:56 +0000