summaryrefslogtreecommitdiffstats
path: root/xlators/storage
Commit message (Collapse)AuthorAgeFilesLines
* posix: Set correct d_type for readdirp() callsPrashanth Pai2016-05-021-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | dirent.d_type can contain the type of the directory entry. The 'd_type' struct member in dirent is present in Linux and many BSD flavours. However, filling d_type with correct value requires support from the underlying filesystem. If not, d_type is set to DT_UNKNOWN. XFS added support for d_type as part of their newer version 5 on-disk format. However, this requires Linux >= 3.15, xfsprogs >= 3.2.0 and the bricks to be formatted using the new format. This patch enables posix xlator to set d_type to the right value even when the underlying filesystem does not support it. d_type can be set using information previously fetched by stat() on the dir entry. This will aid FUSE applications to leverage d_type to avoid the expense of calling lstat() if further actions depend on the type of the file. Refer `man 3 readdir` and `man 2 getdents` BUG: 1175711 Change-Id: Ic5a262fe4c64122726b4fae2d1bea375c559ca04 Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: http://review.gluster.org/14095 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* dht/afr/client/posix: Fail mkdir without gfid-reqPranith Kumar K2016-04-291-1/+9
| | | | | | | | | | | | | | | Do not allow directory creations without gfids as after the directories are created, operations on them fail anyway. So it is better to fail mkdir. BUG: 1317361 Change-Id: I8f8e3b38bbded1960b7215bac0432500f7e78038 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13690 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* storage/posix: change the conflicting msg-idRaghavendra G2016-04-261-2/+4
| | | | | | | | | | | | Change-Id: I11b2ffb73b2358380771921548fa2c51da6ad93f BUG: 1323040 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/14062 Reviewed-by: N Balachandran <nbalacha@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/distribute: detect stale layouts in entry fopsRaghavendra G2016-04-222-13/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dht_mkdir () { first-hashed-subvol = hashed-subvol for "bname" in in-memory layout of "parent"; inodelk (SETLKW, parent, "LAYOUT_HEAL_DOMAIN", "can be any subvol, but we choose first-hashed-subvol randomly"); { begin: hashed-subvol = hashed-subvol for "bname" in in-memory layout of "parent"; hash-range = extract hashe-range from layout of "parent"; ret = mkdir (parent/bname, hashed-subvol, hash-range); if (ret == "hash-value doesn't fall into layout stored on the brick (this error is returned by posix-mkdir)") { refresh_parent_layout (); goto begin; } } inodelk (UNLCK, parent, "LAYOUT_HEAL_DOMAIN", "first-hashed-subvol"); proceed with other parts of dht_mkdir; } posix_mkdir (parent/bname, client-hash-range) { disk-hash-range = getxattr (parent, "dht-layout-key"); if (disk-hash-range != client-hash-range) { fail-with-error ("hash-value doesn't fall into layout stored on the brick"); return 0; } continue-with-posix-mkdir; } Similar changes need to be done for dentry operations like create, symlink, link, unlink, rmdir, rename. These will be addressed in subsequent patches. This patch addresses only mkdir codepath. This change breaks stripe tests, as on some striped subvols dht layout xattrs are not set for some reason. This results in failure of mkdir. Since striped volumes are always created with dht, some tests associated with stripe also fail. So, I am making following tests changes (since stripe is out of maintainance): * modify ./tests/basic/rpc-coverage.t to not to use striped volumes * mark all (2) tests in tests/bugs/stripe/ as bad tests Change-Id: Idd1ae879f24a48303dc743c1bb4d91f89a629e25 BUG: 1323040 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/13885 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com>
* posix: Add lease() fopPoornima G2016-04-212-1/+24
| | | | | | | | | | | Change-Id: I20007d7ff4536ae8180425c84a1aa7863a6f2447 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11598 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* arbiter: write performance improvementRavishankar N2016-04-111-14/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: The throughput for a 'dd' workload was much less for arbiter configuration when compared to normal replica-3 volume. There were 2 issues: i)arbiter_writev was using the request dict as response dict while unwinding, leading to incorect GLUSTERFS_WRITE_IS_APPEND and GLUSTERFS_OPEN_FD_COUNT values (=4), leading to immediate post-ops because is_afr_delayed_changelog_post_op_needed() failed due to afr_are_multiple_fds_opened() check. ii) The arbiter code in afr was setting local->transaction.{start and len} =0 to take full file locks. What this meant was even for simultaenous but non-overlapping writevs, afr_transaction_eager_lock_init() was not happening because afr_locals_overlap() always stays true. Consequently is_afr_delayed_changelog_post_op_needed() failed due to local->delayed_post_op not being set. Fix: i) Send appropriate response dict values in arbiter_writev. ii) Modify flock params instead of local->transaction.{start and len} to take full file locks in the transaction. Also changed _fill_writev_xdata() in posix to fill rsp_xdata for whatever key is requested for. Change-Id: I1c5fc5e98aba49ade540bb441a022e65b753432a BUG: 1324004 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Robert Rauch <robert.rauch@gns-systems.de> Reported-by: Russel Purinton <russell.purinton@gmail.com> Reviewed-on: http://review.gluster.org/13906 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* dht: add "nuke" functionality for efficient server-side deletionJeff Darcy2016-04-071-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This turns a special xattr into an rmdir with flags set. When that hits the posix translator on the server side, that causes the file/directory to be moved into the special "landfill" directory. From there, the posix janitor thread will take care of deleting it entirely on the server side - traversing it recursively if necessary. A couple of secondary issues were fixed to make this effective. * FUSE now ensures that setxattr values are NUL terminated. * The janitor thread now gets woken up immediately when something is placed in 'landfill' instead of only when file descriptors need to be closed. * The default landfill-emptying interval was reduced to 10s. To use the feature, issue a setxattr something like this: setfattr -n glusterfs.dht.nuke -v "" /mnt/glusterfs/vol/some_dir The value doesn't actually matter; the mere receipt of a request with this key is sufficient. Some day it might be useful to allow setting a required value as a sort of password, so that only those who know it can access the underlying special functionality. Change-Id: I8a343c2cdb40a76d5a06c707191fb67babb8514f Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/13878 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* storage/posix: send proper iatt attributes for the root inodeRaghavendra Bhat2016-03-263-15/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * changes in posix to send proper iatt attributes for the root directory when ancestry is built. Before posix was filling only the gfid and the inode type in the iatt structure keeping rest of the fields zeros. This was cached by posix-acl and used to send EACCES when some fops came on that object if the uid of the caller is same as the uid of the object on the disk. * getting and setting inode_ctx in function 'posix_acl_ctx_get' is not atomic and can lead to memory leak when there are multiple looups for an inode at same time. This patch fix this problem * Linking an inode in posix_build_ancestry, can cause a race in posix_acl. When parent inode is linked in posix_build_ancestry, and before it reaches posix_acl_readdirp_cbkc, reate/lookup can come on a leaf-inode, as parent-inode-ctx not yet updated in posix_acl_readdirp_cbk, create/lookup can fail with EACCESS. So do the inode linking in the quota xlator Change-Id: I3101eefb65551cc4162c4ff2963be1b73deacd6d BUG: 1320818 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/13730 Tested-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* storage/posix: Typo in log messageN Balachandran2016-03-171-6/+6
| | | | | | | | | | | | | | Fixed missing spaces between some words in a log message. Signed-off-by: N Balachandran <nbalacha@redhat.com> Change-Id: I24398e6dd2ab83956827fc905f43cffd7e699c51 BUG: 1318107 Reviewed-on: http://review.gluster.org/13747 Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: N Balachandran <nbalacha@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* posix: Filter gsyncd stime xattrKotresh HR2016-03-151-0/+3
| | | | | | | | | | | | | | | | | Filter gsyncd stime xattr in lookup as well. The value of stime would be different among replica bricks and EC bricks. AFR and EC should not take any action on these as it could be different. Change-Id: If577f6115b36e036af2292ea0eaae93110f006ba BUG: 1296496 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13678 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* geo-rep: Mask xtime and stime xattrsKotresh HR2016-02-261-0/+13
| | | | | | | | | | | | | | | | | | | | | Allow access to xtime and stime xattrs only to gsyncd client and mask them for the rest. This is to prevent afr from performing self healing on marker xtime and geo-rep stime xattr which is not expected as each of which gets updated them from backend brick and should not be healed. Change-Id: I24c30f3cfac636a55fd55be989f8db9f8ca10856 BUG: 1296496 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13242 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* all: fixes for clang compile warningsKaleb S KEITHLEY2016-02-153-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cli/src/cli-cmd-parser.c (chenk) cli/src/cli-xml-output.c (spandit) cli/src/cli.c (chenk) libglusterfs/src/common-utils.c (vmallika) libglusterfs/src/gfdb/gfdb_sqlite3.c (jfernand +1) rpc/rpc-transport/socket/src/socket.c (?) xlators/cluster/afr/src/afr-transaction.c (?) xlators/cluster/dht/src/dht-common.h (srangana +2) xlators/cluster/dht/src/dht-selfheal.c (srangana +2) xlators/debug/io-stats/src/io-stats.c (R. Wareing) xlators/features/barrier/src/barrier.c (vshastry) xlators/features/bit-rot/src/bitd/bit-rot-scrub.h (vshankar +1) xlators/features/shard/src/shard.c (kdhananj +1) xlators/mgmt/glusterd/src/glusterd-ganesha.c (skoduri) xlators/mgmt/glusterd/src/glusterd-handler.c (atinmu) xlators/mgmt/glusterd/src/glusterd-op-sm.h (atinmu) xlators/mgmt/glusterd/src/glusterd-snapshot.c (spandit) xlators/mgmt/glusterd/src/glusterd-syncop.c (atinmu) xlators/mgmt/glusterd/src/glusterd-volgen.c (atinmu) xlators/protocol/client/src/client-messages.h (mselvaga +1) xlators/storage/bd/src/bd-helper.c (M. Mohan Kumar) xlators/storage/bd/src/bd.c (M. Mohan Kumar) xlators/storage/posix/src/posix.c (nbalacha +1) Change-Id: I85934fbcaf485932136ef3acd206f6ebecde61dd BUG: 1293133 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13031 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* NSR : nsr server code generation patchJeff Darcy2016-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NSR-server with this patch, appoints the first node on every replica subvolume, as the leader for that subvolume. On receiving a 'write' fop, the leader first checks if there is quorum in the replica subvolume to proceeed. In case there isn't it fails with EROFS. If there is quorum, the leader forwards the fop to the followers. The followers on receiving the fop, perform the operation, and based on the success or failure of the outcome send a +ve or a -ve ack to the leader. The leader after receiving acks from the followers performs a quorum check of the acks, to see if it should even try to perform the fop. If quorum is not being met, and the leader's outcome wouldn't affect quorum, then it would send -ve ack to the client without even performing the fop. If quorum is being met, the leader will then try the fop on itself, and based on it's outcome perform a quorum check of all the acks received (this time, including it's own). Based on the result of the quorum check (irrespective of the outcome on the leader), a +ve or -ve ack is send back to the client. Change-Id: I860654b74c53e9b139b37dba43848e5504df6dce Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12705 Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: Jeff Darcy <jdarcy@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* posix: implement seek() FOPNiels de Vos2016-02-102-1/+82
| | | | | | | | | | | | | | The only lseek() options we need are SEEK_HOLE and SEEK_DATA. Change-Id: I5d15533c53fd710497f97c3cb4a8ea29fba47271 BUG: 1220173 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11484 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* features/shard: Implement zerofill FOPKrutika Dhananjay2016-01-221-8/+20
| | | | | | | | | | | | Change-Id: Iabb89a502cc560edd7fe3755623c74a2ccb853d5 BUG: 1261841 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13234 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features/shard: Implement fallocate FOPKrutika Dhananjay2016-01-181-10/+20
| | | | | | | | | | | | Change-Id: I6f07074e94b115f6c6c2c59a8a1b58ba44b1c12a BUG: 1261841 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13196 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* tier/unlink: symlink failed to unlinkMohammed Rafi KC2015-12-291-1/+2
| | | | | | | | | | | | | | | | | | | | | during unlink of a file, we will get stat just after deleting the file, to see if the file is under migration or not. but this stat call will fail for symlink if the actual file was deleted. So it is better not to send stat request from client if it is a symlink as we are not migrating symlink. Change-Id: Idc033b24fa3522b5261e579889d2195b43419682 BUG: 1293963 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13074 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* build: export minimum symbols from xlators for correct resolutionKaleb S KEITHLEY2015-12-222-2/+2
| | | | | | | | | | | | | | | | | | | | | | Revisiting http://review.gluster.org/#/c/11814/, which unintentionally introduced warnings from libtool about the xlator .so names. According to [1], the -module option must appear in the Makefile.am file(s); if -module is defined in a macro, e.g. in configure(.ac), then libtool will not recognize that this is a module and will emit a warning. [1] http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078 BUG: 1248669 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13003 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* core: add preadv, pwritev, pread, pwrite syscall wrappersKaleb S KEITHLEY2015-12-222-9/+9
| | | | | | | | | | | | | add additional system calls plus pick up a couple missed unwrapped system calls that seem to have slipped into the master branch. Change-Id: If268ccd5e9a139ac3ffd38293c67cd2f62ea5b58 BUG: 1289258 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12895 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* tier:delete the linkfile if data file creation failsMohammed Rafi KC2015-12-222-1/+18
| | | | | | | | | | | | | | | | | | | | | | | If we are creating data file in a hot subvolume then we will create a linkfile in cold subvolume. Linkfile creation happens first. If linkfile creation was successful and data file creation failed, then linkfile in cold subvolume will become stale. This patch will delete the linkfile as well, if data file creation fails. Also this code duplicates dht_create to make tier_create Change-Id: I377a90dad47f288e9576c7323b23cf694a91a7a3 BUG: 1290677 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12948 Reviewed-by: N Balachandran <nbalacha@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* cluster/afr: Fix data loss due to race between sh and ongoing writeKrutika Dhananjay2015-12-223-7/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When IO is happening on a file and a brick goes down comes back up during this time, protocol/client translator attempts reopening of the fd on the gfid handle of the file. But if another client renames this file while a brick was down && writes were in progress on it, once this brick is back up, there can be a race between reopening of the fd and entry self-heal replaying the effect of the rename() on the sink brick. If the reopening of the fd happens first, the application's writes continue to go into the data blocks associated with the gfid. Now entry-self-heal deletes 'src' and creates 'dst' file on the sink, marking dst as a 'newentry'. Data self-heal is also completed on 'dst' as a result and self-heal terminates. If at this point the application is still writing to this fd, all writes on the file after self-heal would go into the data blocks associated with this fd, which would be lost once the fd is closed. The result - the 'dst' file on the source and sink are not the same and there is no pending heal on the file, leading to silent corruption on the sink. Fix: Leverage http://review.gluster.org/#/c/12816/ to ensure the gfid handle path gets saved in .glusterfs/unlink until the fd is closed on the file. During this time, when self-heal sends mknod() with gfid of the file, do the following: link() the gfid handle under .glusterfs/unlink to the new path to be created in mknod() and rename() the gfid handle to go back under .glusterfs/ab/cd/. Change-Id: I86ef1f97a76ffe11f32653bb995f575f7648f798 BUG: 1292379 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13001 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tier/unlink: open fd for special file for fdstatMohammed Rafi KC2015-12-211-11/+10
| | | | | | | | | | | | | | | | | DUring unlink of a file, dht request stat to see whether the file is under migration or not. But in posix_unlink currently we are opening for regular files. so the fdstat for special files are failing with EBAD Change-Id: Ic0678e42e7701c3dffb91d98272e664b0fc646b5 BUG: 1293256 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13034 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Susant Palai <spalai@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* tier:unlink during migrationMohammed Rafi KC2015-12-162-58/+107
| | | | | | | | | | | | | | | | | | | | | | files deleted during promotion were not deleting as the files are moving from hashed to non-hashed. On deleting a file that is undergoing promotion, the unlink call is not sent to the dst file as the hashed subvol == cached subvol. This causes the file to reappear once the migration is complete. This patch also fixes a problem with stale linkfile deleting. Change-Id: I4b02a498218c9d8eeaa4556fa4219e91e7fa71e5 BUG: 1282390 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12829 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* storage/posix: Implement .unlink directoryAshish Pandey2015-12-155-23/+276
| | | | | | | | | | | | | | | | | | | | | | | | Problem: For EC volume, If a file descriptor is open and file has been unlinked, any further write on that fd will fail. When a write request comes, EC internally reads some blocks using anonymous fd. This read will fail as the file has already been unlinked. Solution: To solve this issue, we are using .unlink directory to keep track of unlinked file. If a file is to be unlinked while its fd is open, move this to .unlink directory and unlink it from .glusterfs and real path. Once all the fd will be closed, remove this entry form .unlink directory. Change-Id: I8344edb0d340bdb883dc46458c16edbc336916b9 BUG: 1286029 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/12816 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* storage/posix: fix dict leak in posix_fgetxattrSusant Palai2015-12-101-2/+1
| | | | | | | | | | Change-Id: I8c53805993570e6f37786dde2103cb884c026791 BUG: 1285230 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/12916 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* posix: fix posix_fgetxattr to return the correct errorSusant Palai2015-12-081-3/+23
| | | | | | | | | | | | | | | posix_fgetxattr used to not updating op_ret and op_errno (initialized to -1 and ENOENT respectively) on success cases. Hence, it can return ENOENT even if all the opertions were sucessful. Change-Id: I5db3c1821208166a052d734b0be2553d009b8ee4 BUG: 1285230 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/12745 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* core: use syscall wrappers instead of direct syscalls - tail(2)Kaleb S KEITHLEY2015-11-171-1/+1
| | | | | | | | | | | | | | | | | | | tail, as in dog chasing its tail. These are the unwrapped syscalls that have crept in (or were missed) in the previous patches. various xlators and other components are invoking system calls directly instead of using the libglusterfs/syscall.[ch] wrappers. If not using the system call wrappers there should be a comment in the source explaining why the wrapper isn't used. Change-Id: I6015f97109c4250a5a049496a214d19835e4ae19 BUG: 1267967 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12590 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* marker: do remove xattr only for last linkvmallika2015-11-092-44/+33
| | | | | | | | | | | | | | | | | | With unlink, rename, rmdir, contribution xattrs are removed. If the file is a last link then remove_xattr will fail with ENOENT. So it better to perform remove_xattr only if there are more links to the file Change-Id: Ifc1e7fda4d310fd87f6f28a635c9ea78b8f3929d BUG: 1257694 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12033 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: heal directory path if the directory is not presentMohammed Rafi KC2015-11-081-3/+3
| | | | | | | | | | | | | | | | | | | After a successful nameless lookup if the directory is not present on any of the subvol, then we will get the path of the directory and will recursively send a named lookp on each parent directory. This will help particularly for the scenarios like add brick and attach-tier. Change-Id: I64c2118a5ab03bbaa59b0dfc62babdf4472a92a3 BUG: 1272949 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12376 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* Revert "fuse: resolve complete path after a graph switch"Mohammed Rafi KC2015-11-081-3/+3
| | | | | | | | | | | | | | This reverts commit d0edb6d555d687f76837515207b9408be0bdd55e. The same functionality will be provided in a different patch Change-Id: I3139478b218fa32e803bb088df585fbbdf94af34 BUG: 1272949 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12375 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* core: use syscall wrappers instead of direct syscalls - miscellaneousKaleb S. KEITHLEY2015-10-285-113/+114
| | | | | | | | | | | | | | | various xlators and other components are invoking system calls directly instead of using the libglusterfs/syscall.[ch] wrappers. If not using the system call wrappers there should be a comment in the source explaining why the wrapper isn't used. Change-Id: I1f47820534c890a00b452fa61f7438eb2b3f667c BUG: 1267967 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12276 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* afr: write zeros to sink for non-sparse filesRavishankar N2015-10-281-8/+35
| | | | | | | | | | | | | | | | | Problem: If a file is created with zeroes ('dd', 'fallocate' etc.) when a brick is down, the self-heal does not write the zeroes to the sink after it comes up. Consequenty, there is a mismatch in disk-usage amongst the bricks of the replica. Fix: If we definitely know that the file is not sparse, then write the zeroes to the sink even if the checksums match. Change-Id: Ic739b3da5dbf47d99801c0e1743bb13aeb3af864 BUG: 1272460 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/12371 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* fuse: resolve complete path after a graph switchMohammed Rafi KC2015-10-081-3/+3
| | | | | | | | | | | | | | | | | | If a graph switch has happended as part of a attach-tier, then there is a chance to hash fops to newly added brick before fix-layout. This causes on going i/o to fail. This patch will resolve a path, for graph switch by sending recursive lookup to the parent directories. Those lookups will help to heal the directory. Change-Id: Ia2bb4b43a21e5cc6875ba1205628744c3f0ce4e5 BUG: 1263549 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12184 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* cluster/ec : Mark new entry changelog in entry self-healAshish Pandey2015-10-061-1/+1
| | | | | | | | | | | | | | | | | | | | Problem : When a new entry is created dirty mark xattrs are not created this will need full heal to be performed, even when there are partial failures. Solution : Marks new entry changelog in self-heal. PS: Also fixed erasing of dirty markers when no data heal is required. BUG: 1254121 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Change-Id: I156e3d3201afa77efe118e1aaace1d91c90a9613 Reviewed-on: http://review.gluster.org/11938 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* storage/posix: Reduce number of getxattrs for internal xattrsPranith Kumar K2015-10-011-4/+53
| | | | | | | | | | | | | | | Most of the gluster internal xattrs don't exceed 256 bytes. So try getxattr with ~256 bytes. If it gives ERANGE then go the old way of getxattr with NULL 'buf' to find the length and then getxattr with allocated 'buf' to fill the data. This way we reduce lot of getxattrs. Change-Id: I716d484bc9ba67a81d0cedb5ee3e72a5ba661f6d BUG: 1265893 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12240 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* posix: xattrop 'GF_XATTROP_ADD_ARRAY_WITH_DEFAULT' implementationvmallika2015-09-281-10/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implementation of xattrop type: GF_XATTROP_ADD_ARRAY_WITH_DEFAULT GF_XATTROP_ADD_ARRAY64_WITH_DEFAULT These operations are similar to 'GF_XATTROP_ADD_ARRAY', except that it adds a default value if xattr is missing or its value is zero on disk. One use-case of this operation is in inode-quota. When a new directory is created, its default dir_count should be set to 1. So when a xattrop performed setting inode-xattrs, it should account initial dir_count 1 if the xattrs are not present Here is the usage of this operation value required in xdata for each key struct array { int32_t newvalue_1; int32_t newvalue_2; ... int32_t newvalue_n; int32_t default_1; int32_t default_2; ... int32_t default_n; }; or struct array { int32_t value_1; int32_t value_2; ... int32_t value_n; } data[2]; fill data[0] with new value to add fill data[1] with default value xattrop GF_XATTROP_ADD_ARRAY_WITH_DEFAULT for i from 1 to n { if (xattr (dest_i) is zero or not set in the disk) dest_i = newvalue_i + default_i else dest_i = dest_i + newvalue_i } value in xdata after xattrop is successful struct array { int32_t dest_1; int32_t dest_2; ... int32_t dest_n; }; Change-Id: Ic6a08473e99fd98299a839d4d8416081a7534efd BUG: 1243946 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/11702 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* storage/posix: Prevent extra handle-pathPranith Kumar K2015-09-281-12/+2
| | | | | | | | | | | | | | In readdirp_fill we already have the path of the file/directory. No need to construct handle-path again. This saves two lstats and at least two readlink calls per directory. Change-Id: I8d1b2afeda3e053265a243d4e9a101192f5f509e BUG: 1265893 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12222 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* build: export minimum symbols from xlators for correct resolutionKaleb S. KEITHLEY2015-09-242-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've been lucky that we haven't had any symbol collisions until now. Now we have a collision between the snapview-client's svc_lookup() and libntirpc's svc_lookup() with nfs-ganesha's FSAL_GLUSTER and libgfapi. As a short term solution all the snapview-client's FOP methods were changed to static scope. See http://review.gluster.org/11805. This works in snapview-client because all the FOP methods are defined in a single source file. This solution doesn't work for other xlators with FOP methods defined in multiple source files. To address this we link with libtool's '-export-symbols $symbol-file' (a wrapper around `ld --version-script ...` --- on linux anyway) and only export the minimum required symbols from the xlator sharedlib. N.B. the libtool man page says that the symbol file should be named foo.sym, thus the rename of *.exports to *.sym. While foo.exports worked, we will follow the documentation. Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 1248669 Change-Id: I1de68b3e3be58ae690d8bfb2168bfc019983627c Reviewed-on: http://review.gluster.org/11814 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* storage/posix: Prevent malformed internal link creationsPranith Kumar K2015-09-011-33/+43
| | | | | | | | | | Change-Id: Ia3408f795dcfac143fe898fc5f4d31d2c6f236c1 BUG: 1212110 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10999 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* all: reduce "inline" usageJeff Darcy2015-09-012-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155 BUG: 1245331 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/11769 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* posix.c posix-helpers.c: porting new log messagesHari Gowtham2015-08-312-7/+7
| | | | | | | | | Change-Id: I0c306d796ff49263d8a6c191b24a41da8a21bd2c BUG: 1252695 Signed-off-by: Hari Gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/11609 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/dht: Don't set posix acls on linkto filesNithya Balachandran2015-08-313-7/+23
| | | | | | | | | | | | | | | | | | | | Posix acls on a linkto file change the file's permission bits and cause DHT to treat it as a non-linkto file.This happens on the migration failure of a file on which posix acls were set. The fix prevents posix acls from being set on a linkto file and copies them across only after a file has been successfully migrated. Change-Id: Iccf7ff6fba49fe05d691d9b83bf76a240848b212 BUG: 1247563 Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/12025 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* posix: xattrop 'GF_XATTROP_GET_AND_SET' implementationvmallika2015-08-271-6/+32
| | | | | | | | | | | | | | | | | | GF_XATTROP_GET_AND_SET stores the existing xattr value in xdata and sets the new value xattrop was reusing input xattr dict to set the results instead of creating new dict. This can be problem for server side xlators as the inout dict will have the value changed. Change-Id: I43369082e1d0090d211381181e9f3b9075b8e771 BUG: 1251454 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/11995 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* posix: posix_make_ancestryfromgfid shouldn't log ENOENTvmallika2015-08-133-8/+16
| | | | | | | | | | | | | | posix_make_ancestryfromgfid shouldn't log ENOENT and it should set proper op_errno Change-Id: I8a87f30bc04d33cab06c91c74baa9563a1c7b45d BUG: 1251449 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/11861 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* quota: fix parents caching during build ancestryvmallika2015-07-291-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In build ancestry, we get the list of parents for a file, these parents are cached in inode ctx. This caching is not happening because posix is not setting d_stat information in the leaf node entry This patch fixes the issue Inode-ctx is not updated with new parent when rename performed on same directory. This patch fixes the issue There is a possibility of caching stale entries, consider below example: 1) build_ancestry invoked on a file 2) rename is invoked on the same file 3) buils_ancestry prepared entries of old parent 4) rename completed and in cbk old parent is replaced with new parent in inode ctx 5) now build_ancestry cbk adds old parent to inode ctx In this patch we also remove stale entries in writev and fallocate Change-Id: Ib1854a41b47b14eb775326588352015c83d034de BUG: 1240949 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/11574 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* posix,shard: Fill in ia_size and ia_blocks before unwinding (f)setattrKrutika Dhananjay2015-07-261-2/+14
| | | | | | | | | | | | | | The shard xlator will request for size xattrs in its request and posix will perform xattr_fill of requested keys before unwinding (f)setattr. Change-Id: I4ec4779568be6f805724b875b1b4215787112e7f BUG: 1246082 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/11754 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* dict: dict_set_bin() should never free the pointer on errorNiels de Vos2015-07-241-19/+12
| | | | | | | | | | | | | | | | | | | | | | dict_set_bin() is handling the pointer that it passed inconsistently. Depending on the errors that can occur, the pointer passed to the dict can be free'd, but there is no guarantee. It is cleaner to have the caller free the pointer that allocated it and dict_set_bin() returned an error. When dict_set_bin() returned success, the given pointer will be free'd when dict_unref() calls data_destroy(). Many callers of dict_set_bin() already take care of free'ing the pointer on error. The ones that did not, are corrected with this change too. Change-Id: I39a4f7ebc0cae6d403baba99307d7ce408f25966 BUG: 1242280 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11638 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* libglusterfs: Even anonymous fds must have fd->flags setRaghavendra Talur2015-07-201-5/+13
| | | | | | | | | | | | | | | | | | | | | | We do not set the same flags to anonymous fd that posix uses to open an anonymous fd in the backend. If there are any xlators which rely on these flags for their operation they may not work well. Add proper flags to anonymous fds at the time of their creation and refer to them for subsequent operations. Change-Id: Ia99b7ea7d38839f099c7b4aae3c7ead123bc8c67 BUG: 1211221 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/10219 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* storage/posix: Check xdata for NULL before dict_getRaghavendra Talur2015-07-181-4/+4
| | | | | | | | | | | | | | Performing a dict_get on xdata can lead to frequent logging if xdata is NULL. Change-Id: I1666f0cc958c639ccd816e3738dd4a1efebbff82 BUG: 1235921 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/11390 Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* posix: fix mem-leak in posix xattropvmallika2015-07-161-2/+4
| | | | | | | | | | Change-Id: I1dd70f74a98c5875eb316f3c3e560047f128685b BUG: 1243890 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/11700 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-17 21:21:41 +0000