summaryrefslogtreecommitdiffstats
path: root/xlators
Commit message (Collapse)AuthorAgeFilesLines
* glusterd: ensure volinfo->caps is set to correct valueSanju Rakonde2018-11-051-0/+2
| | | | | | | | | | | | | | | | | | | | | With the commit febf5ed4848, during the volume create op, we are setting volinfo->caps to 0, only if any of the bricks belong to the same node and brickinfo->vg[0] is null. Previously, we used to set volinfo->caps to 0, when either brick doesn't belong to the same node or brickinfo->vg[0] is null. With this patch, we set volinfo->caps to 0, when either brick doesn't belong to the same node or brickinfo->vg[0] is null. (as we do earlier without commit febf5ed4848). > BUG: bz#1635820 > Change-Id: I00a97415786b775fb088ac45566ad52b402f1a49 > Signed-off-by: Sanju Rakonde <srakonde@redhat.com> fixes: bz#1643052 Change-Id: I00a97415786b775fb088ac45566ad52b402f1a49 Signed-off-by: Sanju Rakonde <srakonde@redhat.com>
* posix/ctime: Avoid log flood in posix_update_utime_in_mdataKotresh HR2018-11-051-5/+0
| | | | | | | | | | | | posix_update_utime_in_mdata() unconditionally logs an error if consistent time attributes features is not enabled. This log does not add any value, prints an incorrect errno & floods the log file. Hence nuking this log message in this patch. fixes: bz#1644524 Change-Id: I01736d2ed48d14f12ccd8a808521f59145e42ccb Signed-off-by: Kotresh HR <khiremat@redhat.com>
* features/locks: add buffer overflow checks in pl_getxattrRavishankar N2018-11-021-1/+4
| | | | | | | | | | | | | | | | | | | | | | Problem: A compromised client can send a variable length buffer value for the GF_XATTR_CLRLK_CMD virtual xattr. If the length is greater than the size of the "key" used to send the response back, locks xlator can segfault when it tries to do a dict_set because of the buffer overflow in strncpy of pl_getxattr(). Fix: Perform size checks while forming the 'key'. Note: This fix is already there in the master branch upstream as a part of the commit 052849983e51a061d7fb2c3ffd74fa78bb257084 (https://review.gluster.org/#/c/glusterfs/+/20933/) This patch just picks the code change needed to fix the vulnerability. Fixes: CVE-2018-14652 fixes: bz#1645363 Change-Id: I101693e91f9ea2bd26cef6c0b7d82527fefcb3e2 Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* afr/lease: Read child nodes from lease structureroot2018-10-311-1/+1
| | | | | | | | | | For lease operation, we allocate and store child nodes data in lease structure. Use the same in afr_lease_cbk() while checking for the quorum. Change-Id: If1fdd5a0798888afd39ad3df57d96487baf9d1e6 fixes: bz#1644474 Signed-off-by: Soumya Koduri <skoduri@redhat.com>
* leases:Mark the fop conflicting if lease_id not setSoumya Koduri2018-10-241-4/+8
| | | | | | | | | | | | | | | | | | | Glusterfs leases expects lease_id to be set and sent for each fop to determine conflict resolution with the existing lease. Incase if not set (most likely if there is an older client in a mixed cluster), it makes sense to consider it as conflicitng fop and recall the lease. Also fixed the return status check for __remove_lease(), wherein non-negative value is considered as success case. This is backport of below mainline patch - https://review.gluster.org/21458 Change-Id: I5bcfba4f7c71a5af7cdedeb03436d0b818e85783 updates: #350 Signed-off-by: Soumya Koduri <skoduri@redhat.com>
* afr: prevent winding inodelks twice for arbiter volumesRavishankar N2018-10-101-1/+1
| | | | | | | | | | | | | | | | | | | | Backport of https://review.gluster.org/#/c/glusterfs/+/21380/ Problem: In an arbiter volume, if there is a pending data heal of a file only on arbiter brick, self-heal takes inodelks twice due to a code-bug but unlocks it only once, leaving behind a stale lock on the brick. This causes the next write to the file to hang. Fix: Fix the code-bug to take lock only once. This bug was introduced master with commit eb472d82a083883335bc494b87ea175ac43471ff Thanks to Pranith Kumar K <pkarampu@redhat.com> for finding the RCA. fixes: bz#1637953 Change-Id: I15ad969e10a6a3c4bd255e2948b6be6dcddc61e1 Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* afr: fix incorrect reporting of directory split-brainRavishankar N2018-10-057-16/+22
| | | | | | | | | | | | | | | | | | | Backport of https://review.gluster.org/#/c/glusterfs/+/21135/ Problem: When a directory has dirty xattrs due to failed post-ops or when replace/reset brick is performed, AFR does a conservative merge as expected, but heal-info reports it as split-brain because there are no clear sources. Fix: Modify pending flag to contain information about pending heals and split-brains. For directories, if spit-brain flag is not set,just show them as needing heal and not being in split-brain. Change-Id: I09ef821f6887c87d315ae99e6b1de05103cd9383 fixes: bz#1633634 Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* glusterd: make sure that brickinfo->uuid is not nullSanju Rakonde2018-10-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: After an upgrade from the version where shared-brick-count option is not present to a version which introduced this option causes issue at the mount point i.e, size of the volume at mount point will be reduced by shared-brick-count value times. Cause: shared-brick-count is equal to the number of bricks that are sharing the file system. gd_set_shared_brick_count() calculates the shared-brick-count value based on uuid of the node and fsid of the brick. https://review.gluster.org/#/c/glusterfs/+/19484 handles setting of fsid properly during an upgrade path. This patch assumed that when the code path is reached, brickinfo->uuid is non-null. But brickinfo->uuid is null for all the bricks, as the uuid is null https://review.gluster.org/#/c/glusterfs/+/19484 couldn't reached the code path to set the fsid for bricks. So, we had fsid as 0 for all bricks, which resulted in gd_set_shared_brick_count() to calculate shared-brick-count in a wrong way. i.e, the logic written in gd_set_shared_brick_count() didn't work as expected since fsid is 0. Solution: Before control reaches the code path written by https://review.gluster.org/#/c/glusterfs/+/19484, adding a check for whether brickinfo->uuid is null and if brickinfo->uuid is having null value, calling glusterd_resolve_brick will set the brickinfo->uuid to a proper value. When we have proper uuid, fsid for the bricks will be set properly and shared-brick-count value will be caluculated correctly. Please take a look at the bug https://bugzilla.redhat.com/show_bug.cgi?id=1632889 for complete RCA Steps followed to test the fix: 1. Created a 2 node cluster, the cluster is running with binary which doesn't have shared-brick-count option 2. Created a 2x(2+1) volume and started it 3. Mouted the volume, checked size of volume using df 4. Upgrade to a version where shared-brick-count is introduced (upgraded the nodes one by one i.e, stop the glusterd, upgrade the node and start the glusterd). 5. after upgrading both the nodes, bumped up the cluster.op-version 6. At mount point, df shows the correct size for volume. > BUG: 1632889 > Change-Id: Ib9f078aafb15e899a01086eae113270657ea916b > Signed-off-by: Sanju Rakonde <srakonde@redhat.com> (cherry picked from commit f1e9b878ce2067db83a0baa5f384eda87287719d) fixes: bz#1633479 Change-Id: Ib9f078aafb15e899a01086eae113270657ea916b Signed-off-by: Sanju Rakonde <srakonde@redhat.com>
* cluster/afr: Make data eager-lock decision based on number of locksPranith Kumar K2018-10-053-10/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For both Virt and block workloads the file is opened multiple times leading to dynamically setting eager-lock to off for the workload. Instead of depending on the number-of-open-fds, if we change the logic to depend on number of inodelks, then it will give better performance than the earlier logic. When there is an eager-lock and number of inodelks is more than 1 we know that there is a conflicting lock, so depend on that information to decide whether to keep the current transaction go through delayed-post-op or not. Locks xlator doesn't have implementation to query number of locks in fxattrop in releases older than 3.10 so to keep things backward compatible in 3.12, data transactions will use new logic where as fxattrop transactions will use old logic. I am planning to send one more patch which makes metadata domain locks also depend on inodelk-count Profile info for a dd of 500MB to a file with another fd opened on the file using exec 250>filename Without this patch: 0.14 67.41 us 16.72 us 3870.82 us 892 FINODELK 0.59 279.87 us 95.71 us 2085.89 us 898 FXATTROP 3.46 366.43 us 81.75 us 6952.79 us 4000 WRITE 95.79 148733.99 us 50568.12 us 919127.86 us 273 FSYNC With this patch: 0.00 51.01 us 38.07 us 80.16 us 4 FINODELK 0.00 235.43 us 235.43 us 235.43 us 1 TRUNCATE 0.00 125.07 us 56.80 us 193.33 us 2 GETXATTR 0.00 135.86 us 62.13 us 209.59 us 2 INODELK 0.00 197.88 us 155.39 us 253.90 us 4 FXATTROP 0.00 450.59 us 394.28 us 506.89 us 2 XATTROP 0.00 56.96 us 19.06 us 406.59 us 23 FLUSH 37.81 273648.93 us 48.43 us 6017657.05 us 44 LOOKUP 62.18 4951.86 us 93.80 us 1143154.75 us 3999 WRITE postgresql benchmark performance changed from ~1130 TPS to ~2300TPS randio fio job inside Ovirt based VM went from ~600IOPs to ~2000IOPS fixes bz#1635980 Change-Id: If7f7388d2f08cf7f17ca517a4ea222560661dc36 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* cluster/afr: Batch writes in same lock even when multiple fds are openPranith Kumar K2018-10-051-9/+2
| | | | | | | | | | | | | | | | | | | | | | Problem: When eager-lock is disabled because of multiple-fds opened and app writes come on conflicting regions, the number of locks grows very fast leading to all the CPU being spent just in locking and unlocking by traversing huge queues in locks xlator for granting locks. Fix: Reduce the number of locks in transit by bundling the writes in the same lock and disable delayed piggy-pack when we learn that multiple fds are open on the file. This will reduce the size of queues in the locks xlator. This also reduces the number of network calls like inodelk/fxattrop. Please note that this problem can still happen if eager-lock is disabled as the writes will not be bundled in the same lock. fixes bz#1635979 Change-Id: I8fd1cf229aed54ce5abd4e6226351a039924dd91 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* mgmt/glusterd: use proper path to the volfileRaghavendra Bhat2018-10-043-8/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Till now, glusterd was generating the volfile path for the snapshot volume's bricks like this. /snaps/<snap name>/<brick volfile> But in reality, the path to the brick volfile for a snapshot volume is /snaps/<snap name>/<snap volume name>/<brick volfile> The above workaround was used to distinguish between a mount command used to mount the snapshot volume, and a brick of the snapshot volume, so that based on what is actually happening, glusterd can return the proper volfile (client volfile for the former and the brick volfile for the latter). But, this was causing problems for snapshot restore when brick multiplexing is enabled. Because, with brick multiplexing, it tries to find the volfile and sends GETSPEC rpc call to glusterd using the 2nd style of path i.e. /snaps/<snap name>/<snap volume name>/<brick volfile> So, when the snapshot brick (which is multiplexed) sends a GETSPEC rpc request to glusterd for obtaining the brick volume file, glusterd was returning the client volume file of the snapshot volume instead of the brick volume file. Change-Id: I28b2dfa5d9b379fe943db92c2fdfea879a6a594e fixes: bz#1636218 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* cluster/afr: Delegate name-heal when possiblePranith Kumar K2018-09-212-27/+85
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: When name-self-heal is triggered on the mount, it blocks lookup until name-self-heal completes. But that can lead to hangs when lot of clients are accessing a directory which needs name heal and all of them trigger heals waiting for other clients to complete heal. Fix: When a name-heal is needed but quorum number of names have the file and pending xattrs exist on the parent, then better to delegate the heal to SHD which will be completed as part of entry-heal of the parent directory. We could also do the same for quorum-number of names not present but we don't have any known use-case where this is a frequent occurrence so not changing that part at the moment. When there is a gfid mismatch or missing gfid it is important to complete the heal so that next rename doesn't assume everything is fine and perform a rename etc fixes bz#1625575 Change-Id: I8b002c85dffc6eb6f2833e742684a233daefeb2c Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* cluster/afr: Delegate metadata heal with pending xattrs to SHDPranith Kumar K2018-09-213-38/+47
| | | | | | | | | | | | | | | | | | | Problem: When metadata-self-heal is triggered on the mount, it blocks lookup until metadata-self-heal completes. But that can lead to hangs when lot of clients are accessing a directory which needs metadata heal and all of them trigger heals waiting for other clients to complete heal. Fix: Only when the heal is needed but the pending xattrs are not set, trigger metadata heal that could block lookup. This is the only case where different clients may give different metadata to the clients without heals, which should be avoided. Updates bz#1625575 Change-Id: I6089e9fda0770a83fb287941b229c882711f4e66 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* libgfchangelog: Fix changelog history APIKotresh HR2018-09-211-5/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: If requested start time and end time doesn't fall into first HTIME file, then history API fails even though continuous changelogs are avaiable for the requested range in other HTIME files. This is induced by changelog disable and enable which creates fresh HTIME index file. Cause and Analysis: Each HTIME index file represents the availability of continuous changelogs. If changelog is disabled and enabled, a new HTIME index file is created represents non availability of continuous changelogs. So as long as the requested start and end falls into single HTIME index file and not across, history API should succeed. But History API checks for the changelogs only in first HTIME index file and errors out if not available. Fix: Check in all HTIME index files for availability of continuous changelogs for requested change. Backport of: > Patch: https://review.gluster.org/21016/ > BUG: bz#1622549 > Change-Id: I80eeceb5afbd1b89f86a9dc4c320e161907d3559 > Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit 35aa67001c8fac99b040fbc61f36ef4f1b1590ac) fixes: bz#1630141 Change-Id: I80eeceb5afbd1b89f86a9dc4c320e161907d3559 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* geo-rep: Fix issues related config setKotresh HR2018-09-212-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | 1. '--ignore-mising-args' option for rsync is not being used even though the rsync version is greater than 3.1.0. Fixed the same. 2. '--existing' option for rsync is also not being used. Fixed the same. 3. geo-rep config fails to set rsync-options as the value contains '--'. Interestingly, python argsparse treats the value with '--' (e.g., --ignore-missing-args) as option. But when passed with something like --value=--ignore-missing-args, it succeeds. Fixed the same. Backport of: > Patch: https://review.gluster.org/21191 > Change-Id: Iaeb838acaff1c2920fee9c7f920c99edce13a0a1 > Signed-off-by: Kotresh HR <khiremat@redhat.com> > BUG: 1629561 Change-Id: Iaeb838acaff1c2920fee9c7f920c99edce13a0a1 Signed-off-by: Kotresh HR <khiremat@redhat.com> fixes: bz#1630140
* storage/posix: Avoid log flood in posix_set_parent_ctime()Vijay Bellur2018-09-171-4/+0
| | | | | | | | | | | | | | | | | | | | posix_set_parent_ctime() unconditionally logs an error if consistent time attributes is not enabled. This log does not add any value, prints an incorrect errno & floods the log file. Hence nuking this log message in this patch. Backport of : > Patch: https://review.gluster.org/20547/ > Change-Id: I82a78f2f8ce5ab518f8cdf6d9086a97049712f75 > BUG: 1607049 > Signed-off-by: Vijay Bellur <vbellur@redhat.com> (cherry picked from commit e0df887ba044ce92e9a2822be9261d0f712b02bd) Change-Id: I82a78f2f8ce5ab518f8cdf6d9086a97049712f75 fixes: bz#1629548 Signed-off-by: Vijay Bellur <vbellur@redhat.com>
* posix: disable open/read/write on special filesAmar Tumballi2018-09-061-0/+33
| | | | | | | | | | | | | | | | | | | In the file system, the responsibility w.r.to the block and char device files is related to only support for 'creating' them (using mknod(2)). Once the device files are created, the read/write syscalls for the specific devices are handled by the device driver registered for the specific major number, and depending on the minor number, it knows where to read from. Hence, we are at risk of reading contents from devices which are handled by the host kernel on server nodes. By disabling open/read/write on the device file, we would be safe with the bypass one can achieve from client side (using gfapi) Fixes: bz#1625096 Change-Id: I48c776b0af1cbd2a5240862826d3d8918601e47f Signed-off-by: Amar Tumballi <amarts@redhat.com>
* protocol: don't use allocaAmar Tumballi2018-09-062-103/+58
| | | | | | | | | | | | current implementation of alloca can cause issues when strings larger than the allocated buffer is passed to the xdr. Hence it makes sense to allow XDR decode functions to deal with memory allocations, which we can free later. Fixes: bz#1625097 Change-Id: I3a05553f5702de9575c244649ca0e5ac9abaac94 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* io-stats: dump io-stats info in /var/run/glusterAmar Tumballi2018-09-061-9/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | It wouldn't make sense to allow iostats file to be written in *any* directory. While the formating makes sure we try to append io-stats-name for the file, so overwriting existing file is slim, but in any case it makes sense to restrict dumping to one directory. Below are the sample commands, and files created for the corresponding values: $ setfattr -n trusted.io-stats-dump -v file-for-dump $M0 In this case, the file would be in /var/run/gluster/file-for-dump $ setfattr -n trusted.io-stats-dump -v /dir1/dir2/file-for-dump $M0 In this case, then the dump file is in /var/run/gluster/dir1-dir2-file-for-dump Note that the value passed for this virtual xattr would be treated as a file, and even if the value has '/' in it, it would be changed to '-' for sanity. Fixes: bz#1625106 Change-Id: Id9ae6a40a190b8937c51662e6e1c2a0f6c86a0e0 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* server-protocol: don't allow '../' path in 'name'Amar Tumballi2018-09-062-0/+18
| | | | | | | | | | | | | This will prevent any arbitrary file creation through glusterfs by modifying the client bits. Also check for the similar flaw inside posix too, so we prevent any changes in layers in-between. Fixes: bz#1625095 Signed-off-by: Amar Tumballi <amarts@redhat.com> Change-Id: Id9fe0ef6e86459e8ed85ab947d977f058c5ae06e
* posix: remove not supported get/set contentAmar Tumballi2018-09-063-186/+1
| | | | | | | | | | | | | | | | getting and setting a file's content using extended attribute worked great as a GET/PUT alternative when an object storage is supported on top of Gluster. But it needs application changes, and also, it skips some caching layers. It is not used over years, and not supported any more. Removing the dead code. Fixes: bz#1625102 Change-Id: Ide3b3f1f644f6ca58558bbe45561f346f96b95b7 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* storage/posix: Increment trusted.pgfid in posix_mknodN Balachandran2018-08-291-4/+14
| | | | | | | | | | The value of trusted.pgfid.xx was always set to 1 in posix_mknod. This is incorrect if posix_mknod calls posix_create_link_if_gfid_exists. Change-Id: Ibe87ca6f155846b9a7c7abbfb1eb8b6a99a5eb68 fixes: bz#1623317 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* dht: Delete MDS internal xattr from dict in dht_getxattr_cbkMohit Agrawal2018-08-162-31/+4
| | | | | | | | | | | | | | | | | | Problem: At the time of fetching xattr to heal xattr by afr it is not able to fetch xattr because posix_getxattr has a check to ignore if xattr name is MDS Solution: To ignore same xattr update a check in dht_getxattr_cbk instead of having a check in posix_getxattr Backport of: > BUG: 1584098 > Change-Id: I86cd2b2ee08488cb6c12f407694219d57c5361dc > Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Change-Id: I86cd2b2ee08488cb6c12f407694219d57c5361dc fixes: bz#1611116 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* geo-rep : fix possible crashSunny Kumar2018-08-161-2/+5
| | | | | | | | | | | | | | | | | Problem : In 'glusterd_verify_slave' while tokenizing error message we call 'strtok_r' and store return value in 'tmp' which can be NULL. We are passing this 'tmp' as 1st argument to 'strcmp' which will lead to segmentation fault. Solution : before calling 'strcmp' we should NULL check 'tmp'. Backport of: > Change-Id: Ifd3864b904afe6cd09d9e5a4b55c6d0578e22b9d > BUG: 1602121 > Signed-off-by: Sunny Kumar <sunkumar@redhat.com> Change-Id: Ifd3864b904afe6cd09d9e5a4b55c6d0578e22b9d fixes: bz#1611115 Signed-off-by: Sunny Kumar <sunkumar@redhat.com>
* glusterd: memory leak in geo-rep statusSanju Rakonde2018-08-161-2/+6
| | | | | | | | | | | Backport of: > BUG: 1580352 > Change-Id: I9648e73090f5a2edbac663a6fb49acdb702cdc49 > Signed-off-by: Sanju Rakonde <srakonde@redhat.com> fixes: bz#1611110 Change-Id: I9648e73090f5a2edbac663a6fb49acdb702cdc49 Signed-off-by: Sanju Rakonde <srakonde@redhat.com>
* glusterd/geo-rep: Fix glusterd crashKotresh HR2018-08-151-1/+1
| | | | | | | | | | | | | | | | | Using strdump instead of gf_strdup crashes during free if mempool is being used. gf_free checks the magic number in the header which will not be taken care if strdup is used. Backport of: > BUG: 1576392 > Change-Id: Iab36496554b838a036af9d863e3f5fd07fd9780e > Signed-off-by: Kotresh HR <khiremat@redhat.com> fixes: bz#1611106 Change-Id: Iab36496554b838a036af9d863e3f5fd07fd9780e Signed-off-by: Kotresh HR <khiremat@redhat.com>
* storage/posix: Fix excessive logging in WRITE fop pathKrutika Dhananjay2018-08-101-0/+3
| | | | | | | | | | | | | | | Backport of: https://review.gluster.org/#/c/glusterfs/+/20250 I was running some write-intensive tests on my volume, and in a matter of 2 hrs, the 50GB space in my root partition was exhausted. On inspecting further, figured that excessive logging in bricks was the cause - specifically in posix write when posix_check_internal_writes() does dict_get() without a NULL-check on xdata. Change-Id: I89de57a3a90ca5c375e5b9477801a9e5ff018bbf fixes: bz#1596686 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> (cherry picked from commit 81701e4d92ae7b1d97e5bc955703719f2e9e773a)
* glusterd: _is_prefix should handle 0-length pathsKaushal M2018-07-241-0/+9
| | | | | | | | | If one of the paths given to _is_prefix is 0-length, then it is not a prefix of the other. Hence, _is_prefix should return false. Change-Id: I54aa577a64a58940ec91872d0d74dc19cff9106d fixes: bz#1599785 Signed-off-by: Kaushal M <kaushal@redhat.com>
* afr: switch lk_owner only when pre-op succeedsRavishankar N2018-07-232-15/+10
| | | | | | | | | | | | | | | | | | | | Problem: In a disk full scenario, we take a failure path in afr_transaction_perform_fop() and go to unlock phase. But we change the lk-owner before that, causing unlock to fail. When mount issues another fop that takes locks on that file, it hangs. Fix: Change lk-owner only when we are about to perform the fop phase. Also fix the same issue for arbiters when afr_txn_arbitrate_fop() fails the fop. Also removed the DISK_SPACE_CHECK_AND_GOTO in posix_xattrop. Otherwise truncate to zero will fail pre-op phase with ENOSPC when the user is actually trying to freee up space. Change-Id: Ic4c8a596b4cdf4a7fc189bf00b561113cf114353 fixes: bz#1603056 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit ec0d7d77de3e4bd485a4fa2e53c9137e25c71ce7)
* posix: check before removing stale symlinkRavishankar N2018-07-231-4/+8
| | | | | | | | | | | | | | | BZ 1564071 complains of directories with missing gfid symlinks and corresponding "Found stale gfid handle" messages in the logs. Hence add a check to see if the symlink points to an actual directory before removing it. Note: Removing stale symlinks was added via commit 3e9a9c029fac359477fb26d9cc7803749ba038b2 Change-Id: I5d91fab8e5f3a621a9ecad4a1f9c898a3c2d346a Updates: bz#1603099 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 9ab218be5e69b9f71fe4eea9ca8d114b78cafd25)
* cluster/afr: Prevent execution of code after call_count decrementingPranith Kumar K2018-07-101-7/+8
| | | | | | | | | | | | | | | Problem: When call_count is decremented by one thread, another thread can go ahead with the operation leading to undefined behavior for the thread executing statements after decrementing call count. Fix: Do the operations necessary before decrementing call count. fixes bz#1599629 Change-Id: Icc90cd92ac16e5fbdfe534d9f0a61312943393fe Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> (cherry picked from commit 03f1f5bdc46076178f1afdf8e2a76c5b973fe11f)
* afr: heal gfids when file is not present on all bricksRavishankar N2018-07-095-12/+51
| | | | | | | | | | | | commit 20fa80057eb430fd72b4fa31b9b65598b8ec1265 introduced a regression wherein if a file is present in only 1 brick of replica *and* doesn't have a gfid associated with it, it doesn't get healed upon the next lookup from the client. Fix it. Change-Id: I7d1111dcb45b1b8b8340a7d02558f05df70aa599 fixes: bz#1597117 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit eb472d82a083883335bc494b87ea175ac43471ff)
* cluster/afr: Make sure lk-owner is assigned at the time of lockPranith Kumar K2018-07-041-2/+1
| | | | | | | | | | | | | | | Problem: In the new eager-lock implementation lk-owner is assigned after the 'local' is added to the eager-lock list, so there exists a possibility of lock being sent even before lk-owner is assigned. Fix: Make sure to assign lk-owner before adding local to eager-lock list fixes bz#1598193 Change-Id: I26d1b7bcf3e8b22531f1dc0b952cae2d92889ef2 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> (cherry picked from commit c6f93e422855f656d3a86461a8458f37ad0103eb)
* posix/ctime: Fix differential ctime duing entry operationsKotresh HR2018-07-021-51/+60
| | | | | | | | | | | | | | | | | | | | | | | | We should not be relying on backend file's time attributes to load the initial ctime time attribute structure. This is incorrect as each replica set would have witnessed the file creation at different times. For new file creation, ctime, atime and mtime should be same, hence initiate the ctime structure with the time from the frame. But for the files which were created before ctime feature is enabled, this is not accurate but still fine as the times would get eventually accurate. Backport of: > Patch: https://review.gluster.org/#/c/20281/ > BUG: 1592275 > Change-Id: I206a469c83ee7b26da2fe096ae7bf8ff5986ad67 > Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit 841991130c94e3fcf4076917be6da9ce90406932) fixes: bz#1593537 Change-Id: I206a469c83ee7b26da2fe096ae7bf8ff5986ad67 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* afr: don't update readables if inode refresh failed on all childrenRavishankar N2018-07-024-32/+50
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: If inode refresh failed on all children of afr due to ENOENT (say file migrated by dht), it resets the readables to zero. Any inflight txn which then later comes on the inode fails with EIO because no readable children present for the inode. Fix: Don't update readables when inode refresh fails on *all* children of afr. In that way any inflight txns will either proceed with its own inode refresh if needed and fail it with the right errno or use the old value of readables and continue with the txn. Also, add quorum checks to the beginning of afr_transaction(). Otherwise, we seem to be winding the lock and checking for quorum only in pre-op pahse. Note: This should ideally fix BZ 1329505 since the stop gap fix for it is has been reverted at https://review.gluster.org/#/c/20028. Change-Id: Ia638c092d8d12dc27afb3cdad133394845061319 updates: bz#1597116 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 0f13eed0c1fa74cefed486538b02e0c8a8708456)
* ctime: Fix self heal of symlink in EC volumeKotresh HR2018-07-025-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since IEEE Std 1003.1-2001 does not require any association of file times with symbolic links, there is no requirement that file times be updated by readlink() states [1]. stat on symlink file was generating a readlink fop on one of the subvolumes of ec set which in turn updates atime on that subvolume. This causes mdata xattr to be different across ec set and hence self heal fails. So based on [1], atime is no longer updated by readlink fop. [1] http://pubs.opengroup.org/onlinepubs/009695399/functions/readlink.html Backport of: > Patch: https://review.gluster.org/#/c/20311/ > BUG: 1592509 > Change-Id: I08bd3ca3bdb222bd18160b1aa58fc2f7630c8083 > Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit c097a7894d458e33a41f6db6092677108ef30fec) fixes: bz#1593536 Change-Id: I08bd3ca3bdb222bd18160b1aa58fc2f7630c8083 Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit c097a7894d458e33a41f6db6092677108ef30fec)
* storage/posix: Fix posix_symlinks_match()Pranith Kumar K2018-07-021-3/+13
| | | | | | | | | | | 1) snprintf into linkname_expected should happen with PATH_MAX 2) comparison should happen with linkname_actual with complete string linkname_expected fixes bz#1595524 Change-Id: Ic3b3c362dc6c69c046b9a13e031989be47ecff14 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> (cherry picked from commit 3099d3e6ba81d3e1abf37385b13aabf5837b9c5e)
* glusterfs: access trusted peer group via remote-host commandMohit Agrawal2018-06-251-5/+0
| | | | | | | | | | | | | | | | Problem: In SSL environment the user is able to access volume via remote-host command without adding node in a trusted pool Solution: Change the list of rpc program in glusterd.c at the time of initialization while SSL is enabled > Change-Id: I987e433b639e68ad17b77b6452df1e22dbe0f199 > cherry picked from commit 234d611160840899bcfd5ab1c17a6253673d38ed BUG: 1593525 fixes: bz#1593525 Change-Id: Ice4eda3d8104a4d5641de3cffd7249e46080d48f Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* storage/posix: Handle ENOSPC correctly in zero_fillPranith Kumar K2018-06-141-1/+22
| | | | | | | Change-Id: Icc521d86cc510f88b67d334b346095713899087a fixes: bz#1591185 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> (cherry picked from commit 6ef91480f9e75f63100585bfd19694deb0c2457b)
* protocol/server: Fix xdata leak in seek fopPranith Kumar K2018-06-121-2/+1
| | | | | | | Change-Id: I6125283ed22c04564f0b77bb7a50579a83e02eb0 fixes: bz#1590128 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> (cherry picked from commit fd5b48ea0afd907deb08604415bee14ab65f378b)
* posix/ctime: Fix fops racing in updating mtime/atimeKotresh HR2018-06-081-11/+31
| | | | | | | | | | | | | | | | | | | | | | | | In distributed systems, there could be races with fops updating mtime/atime which could result in different mtime/atime for same file. So updating them only if time is greater than the existing makes sure, only the highest time is retained. If the mtime/atime update comes from the explicit utime syscall, it is allowed to set to previous time. Thanks Xavi for helping in rooting the issue. Backport of: > Patch: https://review.gluster.org/#/c/20120/ > BUG: 1584981 > Change-Id: If1230a75b96d7f9a828795189fcc699049e7826e > Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit a6f0e7a4f1ca203762cae2ed5e426b52124c74dc) fixes: bz#1585894 Change-Id: If1230a75b96d7f9a828795189fcc699049e7826e Signed-off-by: Kotresh HR <khiremat@redhat.com>
* features/shard: Fix missing unlock in shard_fsync_shards_cbk()Vijay Bellur2018-06-061-0/+1
| | | | | | | | | | | | | Backport of: > Change-Id: I745a98e957cf3c6ba69247fcf6b58dd05cf59c3c > Signed-off-by: Vijay Bellur <vbellur@redhat.com> > (cherry picked from commit b21f742f96d46b4adfa87281dd9a2e48fea8d031) > BUG: 789278 Change-Id: I745a98e957cf3c6ba69247fcf6b58dd05cf59c3c fixes: bz#1587908 Signed-off-by: Vijay Bellur <vbellur@redhat.com> (cherry picked from commit b21f742f96d46b4adfa87281dd9a2e48fea8d031)
* protocol/client: Don't send fops till SETVOLUME is completev4.1.0rc0Raghavendra G2018-05-312-3/+9
| | | | | | | | | | | | | | | | | | An earlier commit set conf->connected just after rpc layer sends RPC_CLNT_CONNECT event. However, success of socket level connection connection doesn't indicate brick stack is ready to receive fops, as an handshake has to be done b/w client and server after RPC_CLNT_CONNECT event. Any fop sent to brick in the window between, * protocol/client receiving RPC_CLNT_CONNECT event * protocol/client receiving a successful setvolume response can end up accessing an uninitialized brick stack. So, set conf->connected only after a successful SETVOLUME. Change-Id: I139a03d2da6b0d95a0d68391fcf54b00e749decf fixes: bz#1584633 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> (cherry picked from commit 430e4872db43447c8a15b638760d23c188257139)
* cluster/dht: Fix rebalance log msgN Balachandran2018-05-311-2/+2
| | | | | | | | | | Corrected the name of the xattr and fixed the code to log an error only if op_errno is not ENODATA or ENOATTR. Change-Id: I42c5b1d838eec586ac7bed2471eb1d27ff09a9ea fixes: bz#1583769 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* posix/ctime: Fix updating mtime to older timeKotresh HR2018-05-251-5/+11
| | | | | | | | | | | | | | | | | | With ctime feature enabled, the mtime is not updated when it's set to time older than the existing one. Fixed the same. But the ctime is not allowed to change to older dates. Backport of: > Patch: https://review.gluster.org/#/c/20055/ > BUG: 1581035 > Change-Id: If520922df42d6ce084c8df3046c138f8367164e5 (cherry picked from commit e9e3699456e738635685c9f42d1c4206c6177510) fixes: bz#1582531 Change-Id: If520922df42d6ce084c8df3046c138f8367164e5 Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit e9e3699456e738635685c9f42d1c4206c6177510)
* afr: fix bug-1363721.t failureRavishankar N2018-05-253-0/+55
| | | | | | | | | | | | | | | | | | | | | | | Problem: In the .t, when the only good brick was brought down, writes on the fd were still succeeding on the bad bricks. The inflight split-brain check was marking the write as failure but since the write succeeded on all the bad bricks, afr_txn_nothing_failed() was set to true and we were unwinding writev with success to DHT and then catching the failure in post-op in the background. Fix: Don't wind the FOP phase if the write_subvol (which is populated with readable subvols obtained in pre-op cbk) does not have at least 1 good brick which was up when the transaction started. Note: This fix is not related to brick muliplexing. I ran the .t 10 times with this fix and brick-mux enabled without any failures. Change-Id: I915c9c366aa32cd342b1565827ca2d83cb02ae85 updates: bz#1581548 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 985a1d15db910e012ddc1dcdc2e333cc28a9968b)
* cluster/ec: Fix pre-op xattrop managementXavi Hernandez2018-05-253-32/+66
| | | | | | | | | | | | | | | | | | | | | | | Multiple pre-op xattrop can be simultaneously being processed. On the cbk it was checked if the fop was waiting for some specific data (like size and version) and, if so, it was assumed that this answer should contain that data. This is not true, since a fop can be waiting for some data, but it may come from the xattrop of another fop. This patch differentiates between needing some information and providing it. This is related to parallel writes. Disabling them fixed the problem, but also prevented concurrent reads. A change has been made so that disabling parallel writes still allows parallel reads. Backport of: > BUG: 1578325 Fixes: bz#1582056 Change-Id: I74772ad6b80b7b37805da93d5ec3ae099e96b041 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* storage/posix: use proper FOP for unwinding readdir(p)Raghavendra Bhat2018-05-251-3/+8
| | | | | | | | | | As of now, even for readdirp, posix is unwinding with readdir signature. Change-Id: I6440c8a253c5d78bbcc97043e4e6e208e3d47cd1 fixes: bz#1582199 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> (cherry picked from commit de9b8c06b89b6129154693f048985554ccc5a7e7)
* Revert "glusterfsd: Memleak in glusterfsd process while brick mux is on"Mohit Agrawal2018-05-2523-207/+126
| | | | | | | Updates: bz#1582286 This reverts commit 7c3cc485054e4ede1efb358552135b432fb7047a. Change-Id: I831d646112bcfa13d0c2153482ad00ff1b23aa6c Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* Revert "gluster: Sometimes Brick process is crashed at the time of stopping ↵Mohit Agrawal2018-05-259-190/+61
| | | | | | | | brick" Updates: bz#1582286 This reverts commit 0043c63f70776444f69667a4ef9596217ecb42b7. Change-Id: Iab3b4f4a54e122c589e515add93c6effc966b3e0
generated by cgit (git 2.34.1) at 2024-05-21 01:19:34 +0000