summaryrefslogtreecommitdiffstats
path: root/xlators
Commit message (Collapse)AuthorAgeFilesLines
...
* cluster/dht: Rebalance on all nodes should migrate filesN Balachandran2017-05-176-16/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Rebalance compares the node-uuid of a file against its own to and migrates a file only if they match. However, the current behaviour in both AFR and EC is to return the node-uuid of the first brick in a replica set for all files. This means a single node ends up migrating all the files if the first brick of every replica set is on the same node. Fix: AFR and EC will return all node-uuids for the replica set. The rebalance process will divide the files to be migrated among all the nodes by hashing the gfid of the file and using that value to select a node to perform the migration. This patch makes the required DHT and tiering changes. Some tests in rebal-all-nodes-migrate.t will need to be uncommented once the AFR and EC changes are merged. > BUG: 1366817 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: https://review.gluster.org/17239 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Amar Tumballi <amarts@redhat.com> > Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> > Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> (cherry picked from commit b23bd3dbc2c153171d0bb1205e6804afe022a55f) Change-Id: I5ce41600f5ba0e244ddfd986e2ba8fa23329ff0c BUG: 1451573 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17312 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/dht: Fix crash in dht rmdirN Balachandran2017-05-171-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Using local->call_cnt to check STACK_WINDs can cause dht_rmdir_do to be called erroneously if dht_rmdir_readdirp_cbk unwinds before we check if local->call_cnt is zero in dht_rmdir_opendir_cbk. This can cause frame corruptions and crashes. Thanks to Shyam (srangana@redhat.com) for the analysis. > BUG: 1451083 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: https://review.gluster.org/17305 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> (cherry picked from commit 6f7d55c9d58797beaf8d5393c03a5a545bed8bec) Change-Id: I5362cf78f97f21b3fade0b9e94d492002a8d4a11 BUG: 1451586 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17314 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* afr: propagate correct errno for fop failures in arbiterRavishankar N2017-05-164-15/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: If quorum is not met in fop cbk, arbiter sends an ENOTCONN error to the upper xlators. In a VM workload with sharding enabled, this was leading to the VM pausing when replace-brick was performed as described in the BZ. Fix: Move the fop cbk arbitration logic to afr_handle_quorum() because in normal replica volumes, that is the function that has the quorum and errno checks in the fop cbk path before doing a post-op. Thanks to Pranith for suggesting this approach. > Reviewed-on: https://review.gluster.org/17235 > Smoke: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> (cherry picked from commit 93c850dd2a513fab75408df9634ad3c970a0e859) Change-Id: Ie6315db30c5e36326b71b90a01da824109e86796 BUG: 1450933 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/17294 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* glusterd: Make reset-brick work correctly if brick-mux is onSamikshan Bairagya2017-05-169-80/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | Reset brick currently kills of the corresponding brick process. However, with brick multiplexing enabled, stopping the brick process would render all bricks attached to it unavailable. To handle this correctly, we need to make sure that the brick process is terminated only if brick-multiplexing is disabled. Otherwise, we should send the GLUSTERD_BRICK_TERMINATE rpc to the respective brick process to detach the brick that is to be reset. > Reviewed-on: https://review.gluster.org/17128 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> (cherry picked from commit 74383e3ec6f8244b3de9bf14016452498c1ddcf0) Change-Id: I69002d66ffe6ec36ef48af09b66c522c6d35ac58 BUG: 1449933 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17245 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* nl-cache: free nlc_conf_t in fini()Niels de Vos2017-05-161-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The (xlator_t*)->private structure in negative-lookup-cache is allocated in the init() function of the xlator, but never free'd. Valgrind detected this as: 656 bytes in 1 blocks are definitely lost in loss record X of Y at 0x..+ calloc (/builddir/build/BUILD/valgrind-3.11.0/coregrind/m_replacemalloc/vg_replace_malloc.c:711) by 0x.. __gf_calloc (/usr/src/debug/glusterfs-3.11dev/libglusterfs/src/mem-pool.c:117) by 0x.. init (/usr/src/debug/glusterfs-3.11dev/xlators/performance/nl-cache/src/nl-cache.c:669) by 0x.. __xlator_init (/usr/src/debug/glusterfs-3.11dev/libglusterfs/src/xlator.c:472) by 0x.. xlator_init (/usr/src/debug/glusterfs-3.11dev/libglusterfs/src/xlator.c:498) by 0x.. glusterfs_graph_init (/usr/src/debug/glusterfs-3.11dev/libglusterfs/src/graph.c:321) by 0x.. glusterfs_graph_activate (/usr/src/debug/glusterfs-3.11dev/libglusterfs/src/graph.c:693) by 0x.. glfs_process_volfp (/usr/src/debug/glusterfs-3.11dev/api/src/glfs-mgmt.c:79) by 0x.. glfs_volumes_init (/usr/src/debug/glusterfs-3.11dev/api/src/glfs.c:160) by 0x.. glfs_init_common (/usr/src/debug/glusterfs-3.11dev/api/src/glfs.c:868) by 0x.. glfs_init@@GFAPI_3.4.0 (/usr/src/debug/glusterfs-3.11dev/api/src/glfs.c:913) by 0x.. main (/root/gluster-debug/gfapi-load-volfile/gfapi-load-volfile.c:54) When the xlators is unloaded, it should free the resources it allocated. This can easily be done in the fini() function. Cherry picked from commit d7e9dcfad228f385ad64526b1f06b55e98b06964: > Change-Id: I079e78cc207145bc542e2282fc4cf2bb4dadc28a > BUG: 1442569 > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: https://review.gluster.org/17143 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Change-Id: I079e78cc207145bc542e2282fc4cf2bb4dadc28a BUG: 1450267 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17263 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: Poornima G <pgurusid@redhat.com>
* afr: include quorum type and count when dumping afr privRavishankar N2017-05-121-0/+8
| | | | | | | | | | | | | | | | | | | | | Squash of https://review.gluster.org/17196 and https://review.gluster.org/17215 Dump the client quorum type ('auto', 'fixed' or 'none'). If it is 'fixed', also dump the quorum-count. This information will be available in the client statedump and in /<fuse_mount>/.meta/graphs/active/testvol-replicate-X/private. Also added a test-case. Change-Id: I91367c5250b26efb35e5f7d7c397def09cc77cbc BUG: 1449921 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/17243 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* afr: send the correct iatt values in fsync cbkRavishankar N2017-05-121-25/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: afr unwinds the fsync fop with an iatt buffer from one of its children on whom fsync was successful. But that child might not be a valid read subvolume for that inode because of pending heals or because it happens to be the arbiter brick etc. Thus we end up sending the wrong iatt to mdcache which will in turn serve it to the application on a subsequent stat call as reported in the BZ. Fix: Pick a child on whom the fsync was successful *and* that is readable as indicated in the inode context. > Reviewed-on: https://review.gluster.org/17227 > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.org> (cherry picked from commit 1a8fa910ccba7aa941f673302c1ddbd7bd818e39) Change-Id: Ie8647289219cebe02dde4727e19a729b3353ebcf BUG: 1449924 RCA'ed-by: Miklós Fokin <miklos.fokin@appeartv.com> Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/17244 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* posix: Send SIGKILL in 2nd attemptAtin Mukherjee2017-05-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Commit 21c7f7ba changed the signal from SIGKILL to SIGTERM for the 2nd attempt to terminate the brick process if SIGTERM fails. This patch fixes this problem. >Reviewed-on: https://review.gluster.org/17208 >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.org> >(cherry picked from commit 4f4ad03e0c4739d3fe1b0640ab8b4e1ffc985374) Change-Id: I856df607b7109a215f2a2a4827ba3ea42d8a9729 BUG: 1449004 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17260 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: MOHIT AGRAWAL <moagrawa@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* core: make the per glusterfs_ctx_t timer-wheel refcountedNiels de Vos2017-05-124-27/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xlators can use a 'global' timer-wheel for scheduling events. This timer-wheel is managed per glusterfs_ctx_t, but does not need to be allocated for every graph. When an xlator wants to use the timer-wheel, it will be instanciated on demand, and provided to xlators that request it later on. By adding a reference counter to the glusterfs_ctx_t for the timer-wheel, the threads and structures can be cleaned up when the last xlator does not have a need for it anymore. In general, the xlators request the timer-wheel in init(), and they should return it in fini(). Because the timer-wheel is managed per glusterfs_ctx_t, the functions can be added to ctx.c and do not need to live in their very minimal tw.[ch] files. >Reported-by: Poornima G <pgurusid@redhat.com> >Signed-off-by: Niels de Vos <ndevos@redhat.com> >Reviewed-on: https://review.gluster.org/17068 >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Smoke: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Amar Tumballi <amarts@redhat.com> >Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> >Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> >(cherry picked from commit 73fcf3a874b2049da31d01b8363d1ac85c9488c2) Change-Id: I19d225b39aaa272d9005ba7adc3104c3764f1572 BUG: 1450267 Reviewed-on: https://review.gluster.org/17262 Tested-by: Poornima G <pgurusid@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/ec: fix incorrect answer check in seek fopXavier Hernandez2017-05-111-15/+8
| | | | | | | | | | | | | | | | | | | | | | | | A bad check in the answer of a seek request caused a segmentation fault when seek reported an error. > Change-Id: Ifb25ae8bf7cc4019d46171c431f7b09b376960e8 > BUG: 1439068 > Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> > Reviewed-on: https://review.gluster.org/16998 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Amar Tumballi <amarts@redhat.com> > Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Change-Id: Ifb25ae8bf7cc4019d46171c431f7b09b376960e8 BUG: 1448345 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: https://review.gluster.org/17233 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: cleanup pidfile on pmap signoutAtin Mukherjee2017-05-103-5/+92
| | | | | | | | | | | | | | | | | | | | | | | | This patch ensures 1. brick pidfile is cleaned up on pmap signout 2. pmap signout evemt is sent for all the bricks when a brick process shuts down. >Reviewed-on: https://review.gluster.org/17168 >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> >(cherry picked from commit 3d35e21ffb15713237116d85711e9cd1dda1688a) Change-Id: I7606a60775b484651d4b9743b6037b40323931a2 BUG: 1449004 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17211 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* glusterd: socketfile & pidfile related fixes for brick multiplexing featureMohit Agrawal2017-05-108-41/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: While brick-muliplexing is on after restarting glusterd, CLI is not showing pid of all brick processes in all volumes. Solution: While brick-mux is on all local brick process communicated through one UNIX socket but as per current code (glusterd_brick_start) it is trying to communicate with separate UNIX socket for each volume which is populated based on brick-name and vol-name.Because of multiplexing design only one UNIX socket is opened so it is throwing poller error and not able to fetch correct status of brick process through cli process. To resolve the problem write a new function glusterd_set_socket_filepath_for_mux that will call by glusterd_brick_start to validate about the existence of socketpath. To avoid the continuous EPOLLERR erros in logs update socket_connect code. Test: To reproduce the issue followed below steps 1) Create two distributed volumes(dist1 and dist2) 2) Set cluster.brick-multiplex is on 3) kill glusterd 4) run command gluster v status After apply the patch it shows correct pid for all volumes > BUG: 1444596 > Change-Id: I5d10af69dea0d0ca19511f43870f34295a54a4d2 > Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> > Reviewed-on: https://review.gluster.org/17101 > Smoke: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Prashanth Pai <ppai@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> > (cherry picked from commit 21c7f7baccfaf644805e63682e5a7d2a9864a1e6) Change-Id: Ia95b9d36e50566b293a8d6350f8316dafc27033b BUG: 1449004 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: https://review.gluster.org/17212 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: disallow rebalance & remove-brick on a sharded volumeAtin Mukherjee2017-05-092-0/+19
| | | | | | | | | | | | | | | | | Change-Id: Idfbdbc61ca18054fdbf7556f74e195a63cd8a554 BUG: 1447607 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17160 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> (cherry picked from commit 8375b3d70d5c6268c6770b42a18b2e1bc09e411e) Reviewed-on: https://review.gluster.org/17181 Tested-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* Halo Replication feature for AFR translatorKevin Vigor2017-05-0816-108/+565
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of https://review.gluster.org/16177 https://review.gluster.org/17174 Merged both these patches to make sure IPV6 changes don't make it to 3.11 at all. Summary: Halo Geo-replication is a feature which allows Gluster or NFS clients to write locally to their region (as defined by a latency "halo" or threshold if you like), and have their writes asynchronously propagate from their origin to the rest of the cluster. Clients can also write synchronously to the cluster simply by specifying a halo-latency which is very large (e.g. 10seconds) which will include all bricks. In other words, it allows clients to decide at mount time if they desire synchronous or asynchronous IO into a cluster and the cluster can support both of these modes to any number of clients simultaneously. There are a few new volume options due to this feature: halo-shd-latency: The threshold below which self-heal daemons will consider children (bricks) connected. halo-nfsd-latency: The threshold below which NFS daemons will consider children (bricks) connected. halo-latency: The threshold below which all other clients will consider children (bricks) connected. halo-min-replicas: The minimum number of replicas which are to be enforced regardless of latency specified in the above 3 options. If the number of children falls below this threshold the next best (chosen by latency) shall be swapped in. New FUSE mount options: halo-latency & halo-min-replicas: As descripted above. This feature combined with multi-threaded SHD support (D1271745) results in some pretty cool geo-replication possibilities. Operational Notes: - Global consistency is gaurenteed for synchronous clients, this is provided by the existing entry-locking mechanism. - Asynchronous clients on the other hand and merely consistent to their region. Writes & deletes will be protected via entry-locks as usual preventing concurrent writes into files which are undergoing replication. Read operations on the other hand should never block. - Writes are allowed from _any_ region and propagated from the origin to all other regions. The take away from this is care should be taken to ensure multiple writers do not write the same files resulting in a gfid split-brain which will require resolution via split-brain policies (majority, mtime & size). Recommended method for preventing this is using the nfs-auth feature to define which region for each share has RW permissions, tiers not in the origin region should have RO perms. TODO: - Synchronous clients (including the SHD) should choose clients from their own region as preferred sources for reads. Most of the plumbing is in place for this via the child_latency array. - Better GFID split brain handling & better dent type split brain handling (i.e. create a trash can and move the offending files into it). - Tagging in addition to latency as a means of defining which children you wish to synchronously write to Test Plan: - The usual suspects, clang, gcc w/ address sanitizer & valgrind - Prove tests Reviewers: jackl, dph, cjh, meyering Reviewed By: meyering Subscribers: ethanr Differential Revision: https://phabricator.fb.com/D1272053 Tasks: 4117827 >Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1 >BUG: 1428061 >Signed-off-by: Kevin Vigor <kvigor@fb.com> >Reviewed-on: http://review.gluster.org/16099 >Reviewed-on: https://review.gluster.org/16177 >Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> BUG: 1448416 Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: https://review.gluster.org/17192 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: skip nfs svc reconfigure if nfs xlator is not installedAtin Mukherjee2017-05-071-0/+9
| | | | | | | | | | | | | | | | | | | | | | | With 83abcba, nfs svc is not (re)started or stopped if NFS so file is not installed. However the same check was missing in nfs svc reconfigure which was causing all volume set command to fail. >Reviewed-on: https://review.gluster.org/17149 >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Niels de Vos <ndevos@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> >(cherry picked from commit 316e3300cfaa646b7fa45fcc7f57b81c7bb15a0e) Change-Id: Ie87b5dba44ac59e890cbd60f85944f8e685ad52b BUG: 1447604 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17156 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* SELinux : implementation of SELinux translatorManikandan Selvaganesh2017-05-0410-6/+526
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch implement a part of SELinux translator to support setting SELinux contexts on files in a glusterfs volume. URL: https://github.com/gluster/glusterfs-specs/blob/master/accepted/SELinux-client-support.md Upstream reference : >Change-Id: Id8916bd8e064ccf74ba86225ead95f86dc5a1a25 >BUG: 1318100 >Fixes : #55 >Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> >Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> >Signed-off-by: Niels de Vos <ndevos@redhat.com> >Reviewed-on: https://review.gluster.org/13762 >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Change-Id: Id8916bd8e064ccf74ba86225ead95f86dc5a1a25 BUG: 1447597 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: https://review.gluster.org/17159 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* core: remove experimental xlators and associated testsKaleb S. KEITHLEY2017-05-0350-5808/+2
| | | | | | | | | | | | | | | | | | | | | | | | experimental xlators not included in 3.11 Cherry picked from 4231c40973c60999f5ef759db450d25e129ef6ba: > Change-Id: I547480ee5e7912664784643e436feb198b6d16d0 > BUG: 1415866 > Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> > Reviewed-on: https://review.gluster.org/16447 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> > Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Change-Id: I547480ee5e7912664784643e436feb198b6d16d0 BUG: 1447543 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: https://review.gluster.org/17154 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* fuse: enhance fusedump to include timestamp and a signaturev3.12devCsaba Henk2017-04-301-12/+67
| | | | | | | | | | | | | | (Also referred to as "fusedump v2".) Change-Id: I837944024efd1b9055c2f5f91bd5723ef350e688 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/16422 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* mount/fuse: Replace GF_LOG_OCCASIONALLY with gf_log() to report fop failure ↵Krutika Dhananjay2017-04-301-5/+2
| | | | | | | | | | | | | at all times Change-Id: Ibd8e1c6172812951092ff6097ba4bed943051b7c BUG: 1440051 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/17086 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* cluster/dht: Make rebalance throttle option tuned by numberSusant Palai2017-04-294-30/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current rebalance throttle options: lazy/normal/aggressive may not always be sufficient for the purpose of throttling. In our recent test, we observed for certain setups, normal and aggressive modes behaved similarly consuming full disk bandwidth. So in cases like this admin should be able to tune it down(or vice versa) depending on the need. Along with old throttle configurations, thread counts are tuned based on number. e.g. gluster v set vol-name cluster-rebal.throttle 5. Admin can tune up/down between 0 and the number of cores available. Note: For heterogenous servers, validation will fail on the old server if "number" is given for throttle configuration. The message looks something like this: "volume set: failed: Staging failed on vm2. Error: cluster.rebal-throttle should be {lazy|normal|aggressive}" Test: Manual test by logging active thread number after reconfiguring throttle option. testcase: tests/basic/distribute/throttle-rebal.t Change-Id: I46e3cde546900307831028b344ecf601fd9b02c3 BUG: 1438370 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16980 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: send lookup on old name inside rename with bname and pargfidSusant Palai2017-04-291-9/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | Inside rename, a lookup is done on the source name to make sure that the file is there. But we used to do a gfid based lookup and hence, even if the source name was renamed to a new name from some other client, lookup will be successful as server3_3_lookup will fetch the new path based on the gfid. So even if the source file does not exist any more rename will carry on, and as server3_3_link(destination is hashed to a different brick other than source cached scenario) also does gfid based resolve, it wont detect that the source name does not exist and hardlink creation will be successful (since gfid based resolve will get the new dentry). To solve this problem, do a name based lookup inside rename. So that rename will fail right away if the source does not exist. Change-Id: Ieba8bdd6675088dbf18de90ed4622df043d163bd BUG: 1412135 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16375 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: rebalance perf enhancementSusant Palai2017-04-292-108/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Throttle settings "normal" and "aggressive" for rebalance did not have performance difference. normal mode spawns $(no. of cores - 4)/2 threads and aggressive spawns $(no. of cores - 4) threads. Though aggressive mode has twice the number of threads compared to that of normal mode, there was no performance gain when switched to aggressive mode from normal mode. RCA: During the course of debugging the above problem, we tried assigning migration job to migration threads spawned by rebalance, rather than synctasks(as there is more overhead associated to manage the task queue and threads). This gave us a significant improvement over rebalance under synctasks. This patch does not really gurantee that there will be a clear performance difference between normal and aggressive mode, but this patch certainly maximized the disk utilization for 1GBfiles run. Results: Test enviroment: Gluster Config: Number of Bricks: 2 (one brick per disk(RAID-6 12 disk)) Bricks: Brick1: server1:/brick/test1/1 Brick2: server2:/brick/test1/1 Options Reconfigured: performance.readdir-ahead: on server.event-threads: 4 client.event-threads: 4 1000 files with 1GB each were created/renamed such that all files will have server1 as cached and server2 as hashed, so that all files will be migrated. Test machines had 24 cores each. Results with/without synctask based migration: ----------------------------------------------- mode normal(10threads) aggressive(20threads) timetaken 0:55:30 (h:m:s) 0:56:3 (h:m:s) withsynctask timetaken with migrator 0:38:3 (h:m:s) 0:23:41 (h:m:s) threads From above table it can be seen that, there is a clear 2x perf gain between rebalance with synctask vs rebalance with migrator threads. Additionally this patch modifies the code so that caller will have the exact error number returned by dht_migrate_file(earlier the errno meaning was overloaded). This will help avoiding scenarios where migration failure due to ENOENT, can result in rebalance abort/failure. Change-Id: I8904e2fb147419d4a51c1267be11a08ffd52168e BUG: 1420166 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16427 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Fix removing pmap entry on rpc disconnectPrashanth Pai2017-04-282-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | Problem: The following line of code intended to remove pmap entry for the connection during disconnects: pmap_registry_remove (this, 0, NULL, GF_PMAP_PORT_NONE, xprt); However, no pmap entry will have it's type set to GF_PMAP_PORT_NONE at any point in time. So a call to pmap_registry_search_by_xprt() in pmap_registry_remove() will always fail to find a match. Fix: Optionally ignore pmap entry's type in pmap_registry_search_by_xprt(). BUG: 1193929 Change-Id: I705f101739ab1647ff52a92820d478354407264a Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: https://review.gluster.org/17129 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* build: conditionally build legacy gNFS server and associated sub-packagingKaleb S. KEITHLEY2017-04-287-52/+45
| | | | | | | | | | | | | | | | | | | Plus some additional logic in glusterd to ensure gnfs (glusterfs) daemons are never started if server/nfs xlator is not installed. As a service, nfs is still initialized. The glusterfs-gnfs RPM may be installed or uninstalled independent of anything else, including on a system where gluster is actively running, so the existence of the xlator is always tested before trying to start gnfs. Change-Id: I56743ad1cb36a84917226d7d26cb9d015d441e66 BUG: 1326219 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16958 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/dht: Pass the correct xdata in fremovexattr fopKrutika Dhananjay2017-04-281-8/+4
| | | | | | | | | | | Change-Id: Id84bc87e48f435573eba3b24d3fb3c411fd2445d BUG: 1440051 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/17126 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* fuse: clean up mount flag processingCsaba Henk2017-04-271-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In general, when one invokes a mount helper program -- basically anything that mounts something based on its command line, so thinking of mount(8), mount.<fs-type> or fusermount, but also of FUSE servers in general, including glusterfs -- the command line arguments that are to affect mount(2) are mapped to a bitmask called the mount flags, which is passed to mount(2), so that the kernel can interpret the flag bits and adjusts properties of the mount accordingly. There is a traditional syntax for this mechanism as implemented in mount(8): one passes "-ocomma,separated,mount,options" and the individual option name strings are mapped to flag bits in mount(8). FUSE further explores this idea and typically the FUSE server command lines allow further option names to be used in the "-ooption,name,list" which are then separated from the kernel sanctioned option names (to which we'll refer as "system mount options") and are passed to a platform specific lower level fuse mount helper interface. The separation of system mount option names and FUSE specific option names is also platform specific, so the general mount interface function, which in case of glusterfs is gf_fuse_mount(), should abstract this away. Therefore we change the signature of this function from int gf_fuse_mount (const char *mountpoint, char *fsname, unsigned long mountflags, char *mnt_param, pid_t *mtab_pid, int status_fd); to int gf_fuse_mount (const char *mountpoint, char *fsname, char *mnt_param, pid_t *mtab_pid, int status_fd); and deal with flag extraction in platform specific mount code. Note that the sole purpose of the mountflags argument was to indicate read-only mounting. The other system mount option names were expected to reside in the comma-separated mnt_param string, but they were not properly processed (see the referred BUG). With the new gf_fuse_mount signature read-only mounting is to be indicated as a "ro" component in mnt_param. - For Darwin, which has a dedicated, separate gf_fuse_mount implementation, gf_fuse_mount was ignoring mountflags, so only the signature had to to be adjusted. However, as bonus, we gain read-only support for Darwin, which was missing so far, given that it was indicated via the ignored mountflags. Darwin's low level mount helper relies on the "ro" component of the option string, which agrees with the new calling convention of gf_fuse_mount. - On Linux, system mount option name handling (apart from the distinguished read-only option) used to have the inadvertent side effect of adding "nosuid,nodev" as indicated in BUG; since Ia89d975d1e27fcfa5ab2036ba546aa8fa0d2d1b0 this side effect is removed, but system mount option name handling was left broken (passing system mount options other than "ro" fails to mount). - On other platforms, system mount option name handling is broken (expect for the distinguished read-only option). As of this change, in the general (non-Darwin) implementation of gf_fuse_mount we take care of proper separation of system mount names and their conversion to mount flags. For Linux, we adopt the conversion table from FUSE upstream. For other systems we just provide a best effort to support those system mount options which are understood across all Unices (nosuid,nodev,noatime,noexec,ro). (This can be improved later to provide proper plaform support.) BUG: 1297182 Change-Id: I5d10b5df46feba7a02bf5bf1018db69e6b52260a Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/16313 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Amar Tumballi <amarts@redhat.com>
* libglusterfs/stack.h: reduce duplication of codeAmar Tumballi2017-04-271-5/+5
| | | | | | | | | | | | | | | | * Use STACK_UNWIND_STRICT everywhere. * Provide STACK_WIND_COMMON as both STACK_WIND_COOKIE and STACK_WIND differ by just 1 line and 1 option. Updates gluster/glusterfs#137 Change-Id: Ifbb6b9c4702b02f4a02834824f509fd10c78f0ce Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/16915 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* io-stats: fix some memory leak after finiKinglong Mee2017-04-271-0/+4
| | | | | | | | | | | | Change-Id: Id057b711d7f615c6d2db1ebbca2f17d0afacb2ae BUG: 1444023 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17089 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* nfs: Check for null buf, and set op_errno to EIO not 0Richard Wareing2017-04-261-0/+6
| | | | | | | | | | | | | | | | | | | | Summary: - Prevent crashes for the case where "getattr" actually failed and returned with a NULL buf, but the op_errno was set to 0. - This is a cherry-pick of D1571184 Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: Ia2d6ad7539df714f9420dcf063c7c14e727bb7e3 BUG: 1428064 Reviewed-on: http://review.gluster.org/16152 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: https://review.gluster.org/16803 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* nfs: Tear down transports for requests that arrive before the volume is ↵Shreyas Siravara2017-04-261-0/+43
| | | | | | | | | | | | | | | | | | | | | | initialized Summary: - Disconnects RPC transports for requests that cannot be serviced because volumes are not ready. - This is a cherry-pick of D2991403 Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: I07ff0795b81d25624541ff981b5f2586d078e9a6 BUG: 1428068 Reviewed-on: http://review.gluster.org/16154 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kevin Vigor <kvigor@fb.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-on: https://review.gluster.org/16805 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* cluster/dht Remove redundant logs in dht rmdirN Balachandran2017-04-261-8/+7
| | | | | | | | | | | | | | | Removing redundant logs were introduced in https://review.gluster.org/#/c/17065/ Change-Id: I0d6055488b51a13c91d2121e87f653cdb94888b0 BUG: 1445590 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17118 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Susant Palai <spalai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* nl-cache: Fix the issue in refd_inode counting and prune the cachePoornima G2017-04-263-6/+13
| | | | | | | | | | | | | Change-Id: I5b9beb8502667bc3876385900bc01b6491348716 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17110 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* feature/dht: Directory synchronizationKotresh HR2017-04-2610-1141/+1897
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Design doc: https://review.gluster.org/16876 Directory creation is now synchronized with blocking inodelk of the parent on the hashed subvolume followed by the entrylk on the hashed subvolume between dht_mkdir, dht_rmdir, dht_rename_dir and lookup selfheal mkdir. To maintain internal consistency of directories across all subvols of dht, we need locks. Specifically we are interested in: 1. Consistency of layout of a directory. Only one writer should modify the layout at a time. A writer (layout setting during directory heal as part of lookup) shouldn't modify the layout while there are readers (all other fops like create, mkdir etc., which consume layout) and readers shouldn't read the layout while a writer is in progress. Readers can read the layout simultaneously. Writer takes a WRITE inodelk on the directory (whose layout is being modified) across ALL subvols. Reader takes a READ inodelk on the directory (whose layout is being read) on ANY subvol. 2. Consistency of directory namespace across subvols. The path and associated gfid should be same on all subvols. A gfid should not be associated with more than one path on any subvol. All fops that can change directory names (mkdir, rmdir, renamedir, directory creation phase in lookup-heal) takes an entrylk on hashed subvol of the directory. NOTE1: In point 2 above, since dht takes entrylk on hashed subvol of a directory, the transaction itself is a consumer of layout on parent directory. So, the transaction is a reader of parent layout and does an inodelk on parent directory just like any other layout reader. So a mkdir (dir/subdir) would: > Acquire a READ inodelk on "dir" on any subvol. > Acquire an entrylk (dir, "subdir") on hashed subvol of "subdir". > creates directory on hashed subvol and possibly on non-hashed subvols. > UNLOCK (entrylk) > UNLOCK (inodelk) NOTE2: mkdir fop while setting the layout of the directory being created is considered as a reader, but NOT a writer. The reason is for a fop which can consume the layout of a directory to come either of the following conditions has to be true: > mkdir syscall from application has to complete. In this case no need of synchronization. > A lookup issued on the directory racing with mkdir has to complete. Since layout setting by a lookup is considered as a writer, only one of either mkdir or lookup will set the layout. Code re-organization: All the lock related routines are moved to "dht-lock.c" file. New wrapper function is introduced to take blocking inodelk followed by entrylk 'dht_protect_namespace' Updates #191 Change-Id: I01569094dfbe1852de6f586475be79c1ba965a31 Signed-off-by: Kotresh HR <khiremat@redhat.com> BUG: 1443373 Reviewed-on: https://review.gluster.org/15472 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* debug/sink: add xlator to aid in resource leak debuggingNiels de Vos2017-04-254-1/+96
| | | | | | | | | | | | | | | | | | | | | | This new xlator does not allocate any resources on init(). This makes it a good option to use for debugging xlator releated resources leaks on fini(). By putting the sink xlator as single xlator in a .vol file, and loading it through gfapi, we can investigate the resource leaks that are happening through gfapi (and the Gluster core). By extending the .vol file with additional xlators, it is possible to analyze resource leaks of single xlators. Change-Id: Idb5faa861b623dd5b2a988b181e669b0d52c2a0e BUG: 1425623 Fixes: #176 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16806 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/dht: correct space check for rebalanceSusant Palai2017-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | With rebalance doing fallocate on destination, we don't need to add file size to the "destination available space" to decide whether to migrate the file or not. Notes: Fallocate would have already occupied the file size space on destination Change-Id: If7f6a6654e6257726680cf20d618482a6e9095a6 BUG: 1441508 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17104 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/ec: Implement self-heal-window_size optionSunil Kumar Acharya2017-04-254-3/+21
| | | | | | | | | | | | | | | | Fix implements the heal window size option for EC. This option control the maximum size of read/write operation carried out in self-heal process. BUG: 1441491 Change-Id: I6c0ef65c9ca18b0828f91b319d4f52ac5b77d0d8 Signed-off-by: Sunil Kumar Acharya <sheggodu@redhat.com> Reviewed-on: https://review.gluster.org/17098 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd/geo-rep: Fix snapshot create in geo-rep setupKotresh HR2017-04-241-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterd persists geo-rep sessions in glusterd info file which is represented by dictionary 'volinfo->gsync_slaves' in memory. Glusterd also maintains in memory active geo-rep sessions in dictionary 'volinfo->gsync_active_slaves' whose key is "<slave_url>::<slavhost>". When glusterd is restarted while the geo-rep sessions are active, it builds the 'volinfo->gsync_active_slaves' from persisted glusterd info file. Since slave volume uuid is added to "voinfo->gsync_slaves" with the commit "http://review.gluster.org/13111", it builds it with key "<slave_url>::<slavehost>:<slavevol_uuid>" which is wrong. So during snapshot pre-validation which checks whether geo-rep is active or not, it always says it is ACTIVE, as geo-rep stop would not deleted this key. Fixed the same in this patch. Change-Id: I185178910b4b8a62e66aba406d88d12fabc5c122 BUG: 1443977 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17093 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/dht: Pass the req dict instead of NULL in dht_attr2()Krutika Dhananjay2017-04-243-54/+71
| | | | | | | | | | | | | | | | | | | | | This bug was causing VMs to pause during rebalance. When qemu winds down a STAT, shard fills the trusted.glusterfs.shard.file-size attribute in the req dict which DHT doesn't wind its STAT fop with upon detecting the file has undergone migration. As a result shard doesn't find the value to this key in the unwind path, causing it to fail the STAT with EINVAL. Also, the same bug exists in other fops too, which is also fixed in this patch. Change-Id: Id7823fd932b4e5a9b8779ebb2b612a399c0ef5f0 BUG: 1440051 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/17085 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* debug/error-gen: Use STACK_WIND_TAIL instead of STACK_WINDZhou Zhengping2017-04-211-566/+87
| | | | | | | | | | | | | | | | | Also remove unnecessary fop cbks, which are no longer necessary. 1.We don't need to call STACK_WIND if we care nothing in cbk stack, so I use STACK_WIND_TAIL instead of STACK_WIND without new a frame 2.Fix several indent problems 3.Fix return value issues in init and reconfigure Change-Id: Id57a68fec39b5b47cd4ff77664399ed3ef1d3888 Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-on: https://review.gluster.org/17062 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Smoke: Gluster Build System <jenkins@build.gluster.org>
* cluster/dht: rm -rf fails if dir has stale linkto filesN Balachandran2017-04-211-45/+203
| | | | | | | | | | | | | | | | | | | rm -rf <dir> fails with ENOENT if dir contains a lot of stale linkto files. This is because a single readdirp is sent as part of the rmdir which would return and delete only as many linkto files on the bricks as would fit in one readdirp buffer. Running rm -rf <dir> multiple times will eventually delete all the files. The fix sends readdirp on each subvol until no more entries are returned. Change-Id: I447f2d193de4bd8ac16e4541c6b919d22250e39e BUG: 1442724 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17065 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/afr: GFID split brain resolution with favorite-child-policykarthik-us2017-04-202-45/+162
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently the automatic split brain resolution with favorite child policy is not resolving the GFID split brains. Fix: When there is a GFID split brain and the favorite child policy is set to size/mtime/ctime/majority, based on the policy decide on the source and sinks. Delete the entry from the sinks and recreate it from the source. Mark the appropriate pending attributes and resolve the GFID split brain. When the heal takes place it will complete the pending heals and reset the attributes. Change-Id: Ie30e5373f94ca6f276745d9c3ad662b8acca6946 BUG: 1430719 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16878 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: set conn->reconnect to null on timer cancellationAtin Mukherjee2017-04-201-0/+1
| | | | | | | | | | | Change-Id: Ic48e6652f431daeb0db027660f6c9de16d893f08 BUG: 1443896 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17088 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* Implement negative lookup cachePoornima G2017-04-209-1/+2200
| | | | | | | | | | | | | | | | | | | | | Before creating any file negative lookups(1 in Fuse, 4 in SMB etc.) are sent to verify if the file already exists. By serving these lookups from the cache when possible, increases the create performance by multiple folds in SMB access and some percentage in Fuse/NFS access. Feature page: https://review.gluster.org/#/c/16436 Updates #82 Change-Id: Ib1c0e7ac7a386f943d84f6398c27f9a03665b2a4 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16952 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/dht: Skip file migration if the subvol that meets min-free-diskSusant Palai2017-04-193-25/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | criteria happens to be the same subvol containing data-file Rebalance need to figure out a new subvol in case the hashed subvol does not have enough space. In the process of figuring out the new subvol, we need to ignore the source subvol, otherwise it will lead to data loss. Test: Manual Ran the following sizeof /tmp/1: 1.5GB sizeof /brick/1: 16GB sizeof /tmp/2: 1.5GB <start> glusterd; gluster v create test1 vm1:/brick/1 vm1:/tmp/1; gluster v start test1; mount -t glusterfs vm1:test1 /mnt; for i in {1..2000} do dd if=/dev/zero of=/mnt/file$i bs=1KB count=1 &> /dev/null; done gluster v add-brick test1 vm1:/tmp/2 gluster v set test1 min-free-disk 12GB gluster v remove-brick test1 vm1:/tmp/1 star <end> file count and data were intact. Change-Id: Ib8fc8467a3d48a7c12958824c4f0b88e160b86c1 BUG: 1441508 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17064 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/bit-rot-stub: bring in optional versioningRaghavendra Bhat2017-04-184-59/+305
| | | | | | | | | | | | | | | | * As of now bit-rot-stub does versioning always. This leads lots of getxattr calls being made in lookups. So make object versioning optional. Change-Id: I83713e45ae59fb28004bb3cfa008f2d69edebbfa BUG: 1359599 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/14442 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: don't do a post-op on a brick if op failedRavishankar N2017-04-181-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In afr-v2, self-blaming xattrs are not there by design. But if the FOP failed on a brick due to an error other than ENOTCONN (or even due to ENOTCONN, but we regained connection before postop was wound), we wind the post-op also on the failed brick, leading to setting self-blaming xattrs on that brick. This can lead to undesired results like healing of files in split-brain etc. Fix: If a fop failed on a brick on which pre-op was successful, do not perform post-op on it. This also produces the desired effect of not resetting the dirty xattr on the brick, which is how it should be because if the fop failed on a brick, there is no reason to clear the dirty bit which actually serves as an indication of the failure. Change-Id: I5f1caf4d1b39f36cf8093ccef940118638caa9c4 BUG: 1438255 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16976 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* worm: add check for internal processes in ftruncate()Amar Tumballi2017-04-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fixes the recently seen issues with worm_sh.t test. RCA: - $ git log --oneline xlators/features/read-only/src/worm.c 1b01bdc worm: allow Self-heal-Daemon to perform some operations c5a4a77 features/worm: Adding implementation for ftruncate - These two patches were merged in reverse order of their submission, and hence the check added for internal processes got missed in new fop 'ftruncate()'. The worm_sh.t passed the tests as while that patch got submitted there was no ftruncate() in worm xlator. Change-Id: I81a8a45fa2679917a2c859c4f5224a2c3edbc784 BUG: 1423413 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/17048 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: David Spisla <david.spisla@iternity.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Fix snapshot failure in non-root geo-rep setupKotresh HR2017-04-181-2/+5
| | | | | | | | | | | | | | | | | | | | Geo-replication session directory name has the form '<mastervol>_<slavehost>_<slavevol>'. But in non-root geo-replication setup, while preparing geo-replication session directory name, glusterd is including 'user@' resulting in "<mastervol>_<user@slavehost>_<slavevol>". Hence snapshot is failing to copy geo-rep specific session files. Fixing the same. Change-Id: Id214d3186e40997d2827a0bb60d3676ca2552df7 BUG: 1442760 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17067 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* dht: Add readdir-ahead in rebalance graph if parallel-readdir is onPoornima G2017-04-182-5/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: The value of linkto xattr is generally the name of the dht's next subvol, this requires that the next subvol of dht is not changed for the life time of the volume. But with parallel readdir enabled, the readdir-ahead loaded below dht, is optional. The linkto xattr for first subvol, when: - parallel readdir is enabled : "<volname>-readdir-head-0" - plain distribute volume : "<volname>-client-0" - distribute replicate volume : "<volname>-afr-0" The value of linkto xattr is "<volname>-readdir-head-0" when parallel readdir is enabled, and is "<volname>-client-0" if its disabled. But the dht_lookup takes care of healing if it cannot identify which linkto subvol, the xattr points to. In dht_lookup_cbk, if linkto xattr is found to be "<volname>-client-0" and parallel readdir is enabled, then it cannot understand the value "<volname>-client-0" as it expects "<volname>-readdir-head-0". In that case, dht_lookup_everywhere is issued and then the linkto file is unlinked and recreated with the right linkto xattr. The issue is when parallel readdir is enabled, mount point accesses the file that is currently being migrated. Since rebalance process doesn't have parallel-readdir feature, it expects "<volname>-client-0" where as mount expects "<volname>-readdir-head-0". Thus at some point either the mount or rebalance will fail. Solution: Enable parallel-readdir for rebalance as well and then do not allow enabling/disabling parallel-readdir if rebalance is in progress. Change-Id: I241ab966bdd850e667f7768840540546f5289483 BUG: 1436090 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17056 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Add brick capacity details to get-state CLI outputSamikshan Bairagya2017-04-141-0/+19
| | | | | | | | | | | Change-Id: I53fe180e71d41d56b129254b93bb74014a2cdb43 BUG: 1431192 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17029 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-09 05:52:54 +0000