From b20b60027c7212d7ecba96a7d75b5f5cbcc08989 Mon Sep 17 00:00:00 2001
From: Ashish Pandey <aspandey@redhat.com>
Date: Fri, 6 Sep 2019 14:47:04 +0530
Subject: cluster/ec: Scripts to find and reset files which can be healed.

gfid_needing_heal_parallel.sh - Finds out if a file is healable or not.

correct_pending_heals.sh - Makes necessary changes in xattrs to enable
heal for those files which could be healed.

fixes: #723
Change-Id: I38177888df0fda9486343ee546dc02836b06a5fc
---
 extras/ec-heal-script/README.md                    |  69 ++++
 extras/ec-heal-script/correct_pending_heals.sh     | 415 +++++++++++++++++++++
 .../ec-heal-script/gfid_needing_heal_parallel.sh   | 278 ++++++++++++++
 3 files changed, 762 insertions(+)
 create mode 100644 extras/ec-heal-script/README.md
 create mode 100755 extras/ec-heal-script/correct_pending_heals.sh
 create mode 100755 extras/ec-heal-script/gfid_needing_heal_parallel.sh

(limited to 'extras/ec-heal-script')

diff --git a/extras/ec-heal-script/README.md b/extras/ec-heal-script/README.md
new file mode 100644
index 00000000000..aaefd6681f6
--- /dev/null
+++ b/extras/ec-heal-script/README.md
@@ -0,0 +1,69 @@
+# gluster-heal-scripts
+Scripts to correct extended attributes of fragments of files to make them healble.
+
+Following are the guidelines/suggestions to use these scripts.
+
+1 - Passwordless ssh should be setup for all the nodes of the cluster.
+
+2 - Scripts should be executed from one of these nodes.
+
+3 - Make sure NO "IO" is going on for the files for which we are running
+these two scripts.
+
+4 - There should be no heal going on for the file for which xattrs are being
+set by correct_pending_heals.sh. Disable the self heal while running this script.
+
+5 - All the bricks of the volume should be UP to identify good and bad fragments
+and to decide if an entry is healble or not.
+
+6 - If correct_pending_heals.sh is stopped in the middle while it was processing
+healble entries, it is suggested to re-run gfid_needing_heal_parallel.sh to create
+latest list of healble and non healble entries and "potential_heal" "can_not_heal" files.
+
+7 - Based on the number of entries, these files might take time to get and set the
+stats and xattrs of entries.
+
+8 - A backup of the fragments will be taken on <brick path>/.glusterfs/correct_pending_heals
+    directory with a file name same as gfid.
+
+9 - Once the correctness of the file gets verified by user, these backup should be removed.
+
+10 - Make sure we have enough space on bricks to take these backups.
+
+11 - At the end this will create two files -
+     1 - modified_and_backedup_files - Contains list of files which have been modified and should be healed.
+     2 - can_not_heal - Contains list of files which can not be healed.
+
+12 - It is suggested that the integrity of the data of files, which were modified and healed,
+     should be checked by the user.
+
+
+Usage:
+
+Following are the sequence of steps to use these scripts -
+
+1 - ./gfid_needing_heal_parallel.sh <volume name>
+
+    Execute gfid_needing_heal_parallel.sh with volume name to create list of files which could
+    be healed and can not be healed. It creates "potential_heal" and "can_not_heal" files.
+    During execution, it also displays the list of files on consol with the verdict.
+
+2 - ./correct_pending_heals.sh
+
+    Execute correct_pending_heals.sh without any argument. This script processes entries present
+    in "heal" file. It asks user to enter how many files we want to process in one attempt.
+    Once the count is provided, this script will fetch the entries one by one from "potential_heal" file and takes necessary action.
+    If at this point also a file can not be healed, it will be pushed to "can_not_heal" file.
+    If a file can be healed, this script will modify the xattrs of that file fragments and create an entry in "modified_and_backedup_files" file
+
+3 - At the end, all the entries of "potential_heal" will be processed and based on the processing only two files will be left.
+
+     1 - modified_and_backedup_files - Contains list of files which have been modified and should be healed.
+     2 - can_not_heal - Contains list of files which can not be healed.
+
+Logs and other files -
+
+1 - modified_and_backedup_files  - It contains all the files which could be healed and the location of backup of each fragments.
+2 - can_not_heal - It contains all the files which can not be healed.
+3 - potential_heal - List of files which could be healed and should be processed by "correct_pending_heals.sh"
+4 - /var/log/glusterfs/ec-heal-script.log - It contains logs of both the files.
diff --git a/extras/ec-heal-script/correct_pending_heals.sh b/extras/ec-heal-script/correct_pending_heals.sh
new file mode 100755
index 00000000000..c9f19dd7c89
--- /dev/null
+++ b/extras/ec-heal-script/correct_pending_heals.sh
@@ -0,0 +1,415 @@
+#!/bin/bash
+#  Copyright (c) 2019-2020 Red Hat, Inc. <http://www.redhat.com>
+#  This file is part of GlusterFS.
+#
+#  This file is licensed to you under your choice of the GNU Lesser
+#  General Public License, version 3 or any later version (LGPLv3 or
+#  later), or the GNU General Public License, version 2 (GPLv2), in all
+#  cases as published by the Free Software Foundation.
+
+# This script finally resets the xattrs of all the fragments of a file
+# which can be healed as per gfid_needing_heal_parallel.sh.
+# gfid_needing_heal_parallel.sh will produce two files, potential_heal and can_not_heal.
+# This script takes potential_heal as input and resets xattrs of all the fragments
+# of those files present in this file and which could be healed as per
+# trusted.ec.size xattar of the file else it will place the entry in can_not_heal
+# file.  Those entries which must be healed will be place in must_heal file
+# after setting xattrs so that user can track those files.
+
+
+MOD_BACKUP_FILES="modified_and_backedup_files"
+CAN_NOT_HEAL="can_not_heal"
+LOG_DIR="/var/log/glusterfs"
+LOG_FILE="$LOG_DIR/ec-heal-script.log"
+LINE_SEP="==================================================="
+
+function heal_log()
+{
+    echo "$1" >> "$LOG_FILE"
+}
+
+function desc ()
+{
+    echo ""
+    echo "This script finally resets the xattrs of all the fragments of a file
+which can be healed as per gfid_needing_heal_parallel.sh.
+gfid_needing_heal_parallel.sh will produce two files, potential_heal and can_not_heal.
+This script takes potential_heal as input and resets xattrs of all the fragments
+of those files present in this file and which could be healed as per
+trusted.ec.size xattar of the file else it will place the entry in can_not_heal
+file.  Those entries which must be healed will be place in must_heal file
+after setting xattrs so that user can track those files."
+}
+
+function _init ()
+{
+    if [ $# -ne 0 ]
+    then
+        echo "usage: $0"
+        desc
+        exit 2
+    fi
+
+    if [ ! -f "potential_heal" ]
+    then
+        echo "Nothing to correct. File "potential_heal" does not exist"
+        echo ""
+        desc
+        exit 2
+    fi
+}
+
+function total_file_size_in_hex()
+{
+    local frag_size=$1
+    local size=0
+    local hex_size=""
+
+    size=$((frag_size * 4))
+    hex_size=$(printf '0x%016x' $size)
+    echo "$hex_size"
+}
+
+function backup_file_fragment()
+{
+    local file_host=$1
+    local file_entry=$2
+    local gfid_actual_paths=$3
+    local brick_root=""
+    local temp=""
+    local backup_dir=""
+    local cmd=""
+    local gfid=""
+
+    brick_root=$(echo "$file_entry" | cut -d "#" -f 1)
+    temp=$(echo "$(basename "$BASH_SOURCE")" | cut -d '.' -f 1)
+    backup_dir=$(echo "${brick_root}/.glusterfs/${temp}")
+    file_entry=${file_entry//#}
+
+    gfid=$(echo "${gfid_actual_paths}" | cut -d '|' -f 1 | cut -d '/' -f 5)
+    echo "${file_host}:${backup_dir}/${gfid}" >> "$MOD_BACKUP_FILES"
+
+    cmd="mkdir -p ${backup_dir} && yes | cp -af ${file_entry} ${backup_dir}/${gfid} 2>/dev/null"
+    ssh -n "${file_host}" "${cmd}"
+}
+
+function set_frag_xattr ()
+{
+    local file_host=$1
+    local file_entry=$2
+    local good=$3
+    local cmd1=""
+    local cmd2=""
+    local cmd=""
+    local version="0x00000000000000010000000000000001"
+    local dirty="0x00000000000000010000000000000001"
+
+    if [[ $good -eq 0 ]]
+    then
+            version="0x00000000000000000000000000000000"
+    fi
+
+    cmd1=" setfattr -n trusted.ec.version -v ${version} ${file_entry} &&"
+    cmd2=" setfattr -n trusted.ec.dirty -v ${dirty} ${file_entry}"
+    cmd=${cmd1}${cmd2}
+    ssh -n "${file_host}" "${cmd}"
+}
+
+function set_version_dirty_xattr ()
+{
+    local file_paths=$1
+    local good=$2
+    local gfid_actual_paths=$3
+    local file_entry=""
+    local file_host=""
+    local bpath=""
+
+    for bpath in ${file_paths//,/ }
+    do
+        file_host=$(echo "$bpath" | cut -d ":" -f 1)
+        file_entry=$(echo "$bpath" | cut -d ":" -f 2)
+        backup_file_fragment "$file_host" "$file_entry" "$gfid_actual_paths"
+        file_entry=${file_entry//#}
+        set_frag_xattr "$file_host" "$file_entry" "$good"
+    done
+}
+
+function match_size_xattr_quorum ()
+{
+    local file_paths=$1
+    local file_entry=""
+    local file_host=""
+    local cmd=""
+    local size_xattr=""
+    local bpath=""
+    declare -A xattr_count
+
+    for bpath in ${file_paths//,/ }
+    do
+        size_xattr=""
+        file_host=$(echo "$bpath" | cut -d ":" -f 1)
+        file_entry=$(echo "$bpath" | cut -d ":" -f 2)
+        file_entry=${file_entry//#}
+
+        cmd="getfattr -n trusted.ec.size -d -e hex ${file_entry} 2>/dev/null | grep -w "trusted.ec.size" | cut -d '=' -f 2"
+        size_xattr=$(ssh -n "${file_host}" "${cmd}")
+        if [[ -n $size_xattr ]]
+        then
+            count=$((xattr_count["$size_xattr"] + 1))
+            xattr_count["$size_xattr"]=${count}
+            if [[ $count -ge 4 ]]
+            then
+                echo "${size_xattr}"
+                return
+            fi
+        fi
+    done
+    echo "False"
+}
+
+function match_version_xattr ()
+{
+    local file_paths=$1
+    local file_entry=""
+    local file_host=""
+    local cmd=""
+    local version=""
+    local bpath=""
+    declare -A ver_count
+
+    for bpath in ${file_paths//,/ }
+    do
+        version=""
+        file_host=$(echo "$bpath" | cut -d ":" -f 1)
+        file_entry=$(echo "$bpath" | cut -d ":" -f 2)
+        file_entry=${file_entry//#}
+
+        cmd="getfattr -n trusted.ec.version -d -e hex ${file_entry} 2>/dev/null | grep -w "trusted.ec.version" | cut -d '=' -f 2"
+        version=$(ssh -n "${file_host}" "${cmd}")
+        ver_count["$version"]=$((ver_count["$version"] + 1))
+    done
+    for key in "${ver_count[@]}"
+    do
+        if [[ $key -ge 4 ]]
+        then
+            echo "True"
+            return
+        else
+            echo "False"
+            return
+        fi
+    done
+}
+
+function match_stat_size_with_xattr ()
+{
+    local bpath=$1
+    local size=$2
+    local file_stat=$3
+    local xattr=$4
+    local file_entry=""
+    local file_host=""
+    local cmd=""
+    local stat_output=""
+    local hex_size=""
+
+    file_host=$(echo "$bpath" | cut -d ":" -f 1)
+    file_entry=$(echo "$bpath" | cut -d ":" -f 2)
+
+    file_entry=${file_entry//#}
+    cmd="stat --format=%F:%B:%s $file_entry 2>/dev/null"
+    stat_output=$(ssh -n "${file_host}" "${cmd}")
+    echo "$stat_output" | grep -w "${file_stat}" > /dev/null
+
+    if [[ $? -eq 0 ]]
+    then
+        cmd="getfattr -n trusted.ec.size -d -e hex ${file_entry} 2>/dev/null | grep -w "trusted.ec.size" | cut -d '=' -f 2"
+        hex_size=$(ssh -n "${file_host}" "${cmd}")
+
+        if [[ -z $hex_size || "$hex_size" != "$xattr" ]]
+        then
+            echo "False"
+            return
+        fi
+        size_diff=$(printf '%d' $(( size - hex_size )))
+        if [[ $size_diff -gt 2047 ]]
+        then
+            echo "False"
+            return
+        else
+            echo "True"
+            return
+        fi
+    else
+        echo "False"
+        return
+    fi
+}
+
+function find_file_paths ()
+{
+    local bpath=$1
+    local file_entry=""
+    local file_host=""
+    local cmd=""
+    local brick_root=""
+    local gfid=""
+    local actual_path=""
+    local gfid_path=""
+
+    file_host=$(echo "$bpath" | cut -d ":" -f 1)
+    file_entry=$(echo "$bpath" | cut -d ":" -f 2)
+    brick_root=$(echo "$file_entry" | cut -d "#" -f 1)
+
+    gfid=$(echo "${file_entry}" | grep ".glusterfs")
+    if [[ -n "$gfid" ]]
+    then
+        gfid_path=$(echo "$file_entry" | cut -d "#" -f 2)
+        file_entry=${file_entry//#}
+        cmd="find -L '$brick_root' -samefile '$file_entry' 2>/dev/null | grep -v '.glusterfs' "
+        actual_path=$(ssh -n "${file_host}" "${cmd}")
+        #removing absolute path so that user can refer this from mount point
+        actual_path=${actual_path#"$brick_root"}
+    else
+        actual_path=$(echo "$file_entry" | cut -d "#" -f 2)
+        file_entry=${file_entry//#}
+        cmd="find -L '$brick_root' -samefile '$file_entry' 2>/dev/null | grep '.glusterfs' "
+        gfid_path=$(ssh -n "${file_host}" "${cmd}")
+        gfid_path=${gfid_path#"$brick_root"}
+    fi
+
+    echo "${gfid_path}|${actual_path}"
+}
+
+function log_can_not_heal ()
+{
+    local gfid_actual_paths=$1
+    local file_paths=$2
+    file_paths=${file_paths//#}
+
+    echo "${LINE_SEP}" >> "$CAN_NOT_HEAL"
+    echo "Can Not Heal : $(echo "$gfid_actual_paths" | cut -d '|' -f 2)" >> "$CAN_NOT_HEAL"
+    for bpath in ${file_paths//,/ }
+    do
+        echo "${bpath}" >> "$CAN_NOT_HEAL"
+    done
+}
+
+function check_all_frag_and_set_xattr ()
+{
+    local file_paths=$1
+    local total_size=$2
+    local file_stat=$3
+    local bpath=""
+    local healthy_count=0
+    local match="False"
+    local matching_bricks=""
+    local bad_bricks=""
+    local gfid_actual_paths=""
+
+    for bpath in ${file_paths//,/ }
+    do
+        if [[ -n "$gfid_actual_paths" ]]
+        then
+            break
+        fi
+        gfid_actual_paths=$(find_file_paths "$bpath")
+    done
+
+   match=$(match_size_xattr_quorum "$file_paths")
+
+#   echo "${match} : $bpath" >> "$MOD_BACKUP_FILES"
+
+    if [[ "$match" != "False" ]]
+    then
+        xattr="$match"
+        for bpath in ${file_paths//,/ }
+        do
+            match="False"
+            match=$(match_stat_size_with_xattr "$bpath" "$total_size" "$file_stat" "$xattr")
+            if [[ "$match" == "True" ]]
+            then
+                matching_bricks="${bpath},${matching_bricks}"
+                healthy_count=$((healthy_count + 1))
+            else
+                bad_bricks="${bpath},${bad_bricks}"
+            fi
+        done
+    fi
+
+    if [[ $healthy_count -ge 4 ]]
+    then
+        match="True"
+        echo "${LINE_SEP}" >> "$MOD_BACKUP_FILES"
+        echo "Modified : $(echo "$gfid_actual_paths" | cut -d '|' -f 2)" >> "$MOD_BACKUP_FILES"
+        set_version_dirty_xattr  "$matching_bricks" 1 "$gfid_actual_paths"
+        set_version_dirty_xattr  "$bad_bricks" 0 "$gfid_actual_paths"
+    else
+        log_can_not_heal "$gfid_actual_paths" "${file_paths}"
+    fi
+
+    echo "$match"
+}
+function set_xattr()
+{
+    local count=$1
+    local heal_entry=""
+    local file_stat=""
+    local frag_size=""
+    local total_size=""
+    local file_paths=""
+    local num=""
+    local can_heal_count=0
+
+    heal_log "Started $(basename $BASH_SOURCE) on $(date) "
+
+    while read -r heal_entry
+    do
+        heal_log "$LINE_SEP"
+        heal_log "${heal_entry}"
+
+        file_stat=$(echo "$heal_entry" | cut -d "|" -f 1)
+        frag_size=$(echo "$file_stat" | rev | cut -d ":" -f 1 | rev)
+        total_size="$(total_file_size_in_hex "$frag_size")"
+        file_paths=$(echo "$heal_entry" | cut -d "|" -f 2)
+        match=$(check_all_frag_and_set_xattr "$file_paths" "$total_size" "$file_stat")
+        if [[ "$match" == "True" ]]
+        then
+            can_heal_count=$((can_heal_count + 1))
+        fi
+
+        sed -i '1d' potential_heal
+        count=$((count - 1))
+        if [ $count == 0 ]
+        then
+            num=$(cat potential_heal | wc -l)
+            heal_log "$LINE_SEP"
+            heal_log "${1} : Processed"
+            heal_log "${can_heal_count} : Modified to Heal"
+            heal_log "$((${1} - can_heal_count)) : Moved to can_not_heal."
+            heal_log "${num} : Pending as Potential Heal"
+            exit 0
+        fi
+
+    done < potential_heal
+}
+
+function main ()
+{
+    local count=0
+
+    read -p "Number of files to correct: [choose between 1-1000] (0 for All):" count
+    if [[ $count -lt 0 || $count -gt 1000 ]]
+    then
+        echo "Provide correct value:"
+        exit 2
+    fi
+
+    if [[ $count -eq 0 ]]
+    then
+        count=$(cat potential_heal | wc -l)
+    fi
+    set_xattr "$count"
+}
+
+_init "$@" && main "$@"
diff --git a/extras/ec-heal-script/gfid_needing_heal_parallel.sh b/extras/ec-heal-script/gfid_needing_heal_parallel.sh
new file mode 100755
index 00000000000..d7f53c97c33
--- /dev/null
+++ b/extras/ec-heal-script/gfid_needing_heal_parallel.sh
@@ -0,0 +1,278 @@
+#!/bin/bash
+#  Copyright (c) 2019-2020 Red Hat, Inc. <http://www.redhat.com>
+#  This file is part of GlusterFS.
+#
+#  This file is licensed to you under your choice of the GNU Lesser
+#  General Public License, version 3 or any later version (LGPLv3 or
+#  later), or the GNU General Public License, version 2 (GPLv2), in all
+#  cases as published by the Free Software Foundation.
+
+# This script provides a list of all the files which can be healed or not healed.
+# It also generates two files, potential_heal and can_not_heal, which contains the information
+# of all theose files. These files could be used by correct_pending_heals.sh to correct
+# the fragmnets so that files could be healed by shd.
+
+CAN_NOT_HEAL="can_not_heal"
+CAN_HEAL="potential_heal"
+LINE_SEP="==================================================="
+LOG_DIR="/var/log/glusterfs"
+LOG_FILE="$LOG_DIR/ec-heal-script.log"
+
+function heal_log()
+{
+    echo "$1" >> "$LOG_FILE"
+}
+
+function _init ()
+{
+    if [ $# -ne 1 ]; then
+    echo "usage: $0 <gluster volume name>";
+    echo "This script provides a list of all the files which can be healed or not healed.
+It also generates two files, potential_heal and can_not_heal, which contains the information
+of all theose files. These files could be used by correct_pending_heals.sh to correct
+the fragmnets so that files could be healed by shd."
+    exit 2;
+    fi
+
+    volume=$1;
+}
+
+function get_pending_entries ()
+{
+    local volume_name=$1
+
+    gluster volume heal "$volume_name" info | grep -v ":/" | grep -v "Number of entries" | grep -v "Status:" | sort -u | sed '/^$/d'
+}
+
+function get_entry_path_on_brick()
+{
+    local path="$1"
+    local gfid_string=""
+    if [[ "${path:0:1}" == "/" ]];
+    then
+        echo "$path"
+    else
+        gfid_string="$(echo "$path" | cut -f2 -d':' | cut -f1 -d '>')"
+        echo "/.glusterfs/${gfid_string:0:2}/${gfid_string:2:2}/$gfid_string"
+    fi
+}
+
+function run_command_on_server()
+{
+	local subvolume="$1"
+	local host="$2"
+	local cmd="$3"
+	local output
+        output=$(ssh -n "${host}" "${cmd}")
+	if [ -n "$output" ]
+	then
+            echo "$subvolume:$output"
+	fi
+}
+
+function get_entry_path_all_bricks ()
+{
+    local entry="$1"
+    local bricks="$2"
+    local cmd=""
+    for brick in $bricks
+    do
+	    echo "${brick}#$(get_entry_path_on_brick "$entry")"
+    done | tr '\n' ','
+}
+
+function get_stat_for_entry_from_all_bricks ()
+{
+    local entry="$1"
+    local bricks="$2"
+    local subvolume=0
+    local host=""
+    local bpath=""
+    local cmd=""
+
+    for brick in $bricks
+    do
+        if [[ "$((subvolume % 6))" == "0" ]]
+        then
+            subvolume=$((subvolume+1))
+        fi
+        host=$(echo "$brick" | cut -f1 -d':')
+        bpath=$(echo "$brick" | cut -f2 -d':')
+
+	cmd="stat --format=%F:%B:%s $bpath$(get_entry_path_on_brick "$entry") 2>/dev/null"
+    run_command_on_server "$subvolume" "${host}" "${cmd}" &
+    done | sort | uniq -c | sort -rnk1
+}
+
+function get_bricks_from_volume()
+{
+    local v=$1
+    gluster volume info "$v" | grep -E "^Brick[0-9][0-9]*:" | cut -f2- -d':'
+}
+
+function print_entry_gfid()
+{
+    local host="$1"
+    local dirpath="$2"
+    local entry="$3"
+    local gfid
+    gfid="$(ssh -n "${host}" "getfattr -d -m. -e hex $dirpath/$entry 2>/dev/null | grep trusted.gfid=|cut -f2 -d'='")"
+    echo "$entry" - "$gfid"
+}
+
+function print_brick_directory_info()
+{
+    local h="$1"
+    local dirpath="$2"
+    while read -r e
+    do
+        print_entry_gfid "${h}" "${dirpath}" "${e}"
+    done < <(ssh -n "${h}" "ls $dirpath 2>/dev/null")
+}
+
+function print_directory_info()
+{
+    local entry="$1"
+    local bricks="$2"
+    local h
+    local b
+    local gfid
+    for brick in $bricks;
+    do
+        h="$(echo "$brick" | cut -f1 -d':')"
+        b="$(echo "$brick" | cut -f2 -d':')"
+        dirpath="$b$(get_entry_path_on_brick "$entry")"
+	print_brick_directory_info "${h}" "${dirpath}" &
+    done | sort | uniq -c
+}
+
+function print_entries_needing_heal()
+{
+    local quorum=0
+    local entry="$1"
+    local bricks="$2"
+    while read -r line
+    do
+        quorum=$(echo "$line" | awk '{print $1}')
+        if [[ "$quorum" -lt 4 ]]
+        then
+            echo "$line - Not in Quorum"
+        else
+            echo "$line - In Quorum"
+        fi
+    done < <(print_directory_info "$entry" "$bricks")
+}
+
+function find_file_paths ()
+{
+    local bpath=$1
+    local file_entry=""
+    local file_host=""
+    local cmd=""
+    local brick_root=""
+    local gfid=""
+    local actual_path=""
+    local gfid_path=""
+
+    file_host=$(echo "$bpath" | cut -d ":" -f 1)
+    file_entry=$(echo "$bpath" | cut -d ":" -f 2)
+    brick_root=$(echo "$file_entry" | cut -d "#" -f 1)
+
+    gfid=$(echo "${file_entry}" | grep ".glusterfs")
+
+    if [[ -n "$gfid" ]]
+    then
+        gfid_path=$(echo "$file_entry" | cut -d "#" -f 2)
+        file_entry=${file_entry//#}
+        cmd="find -L '$brick_root' -samefile '$file_entry' 2>/dev/null | grep -v '.glusterfs' "
+        actual_path=$(ssh -n "${file_host}" "${cmd}")
+        #removing absolute path so that user can refer this from mount point
+        actual_path=${actual_path#"$brick_root"}
+    else
+        actual_path=$(echo "$file_entry" | cut -d "#" -f 2)
+        file_entry=${file_entry//#}
+        cmd="find -L '$brick_root' -samefile '$file_entry' 2>/dev/null | grep '.glusterfs' "
+        gfid_path=$(ssh -n "${file_host}" "${cmd}")
+        gfid_path=${gfid_path#"$brick_root"}
+    fi
+
+    echo "${gfid_path}|${actual_path}"
+}
+
+function log_can_not_heal ()
+{
+    local gfid_actual_paths=$1
+    local file_paths=$2
+    file_paths=${file_paths//#}
+
+    echo "${LINE_SEP}" >> "$CAN_NOT_HEAL"
+    echo "Can Not Heal : $(echo "$gfid_actual_paths" | cut -d '|' -f 2)" >> "$CAN_NOT_HEAL"
+    for bpath in ${file_paths//,/ }
+    do
+        echo "${bpath}" >> "$CAN_NOT_HEAL"
+    done
+}
+
+function main ()
+{
+    local bricks=""
+    local quorum=0
+    local stat_info=""
+    local file_type=""
+    local gfid_actual_paths=""
+    local bpath=""
+    local file_paths=""
+    local good=0
+    local bad=0
+    bricks=$(get_bricks_from_volume "$volume")
+    rm -f "$CAN_HEAL"
+    rm -f "$CAN_NOT_HEAL"
+    mkdir "$LOG_DIR" -p
+
+    heal_log "Started $(basename "$BASH_SOURCE") on $(date) "
+    while read -r heal_entry
+    do
+        heal_log "------------------------------------------------------------------"
+        heal_log "$heal_entry"
+
+        gfid_actual_paths=""
+        file_paths="$(get_entry_path_all_bricks "$heal_entry" "$bricks")"
+        stat_info="$(get_stat_for_entry_from_all_bricks "$heal_entry" "$bricks")"
+        heal_log "$stat_info"
+
+        quorum=$(echo "$stat_info" | head -1 | awk '{print $1}')
+        good_stat=$(echo "$stat_info" | head -1 | awk '{print $3}')
+        file_type="$(echo "$stat_info" | head -1 | cut -f2 -d':')"
+        if [[ "$file_type" == "directory" ]]
+        then
+            print_entries_needing_heal "$heal_entry" "$bricks"
+        else
+            if [[ "$quorum" -ge 4 ]]
+            then
+                good=$((good + 1))
+                heal_log "Verdict: Healable"
+
+                echo "${good_stat}|$file_paths" >> "$CAN_HEAL"
+            else
+                bad=$((bad + 1))
+                heal_log "Verdict: Not Healable"
+                for bpath in ${file_paths//,/ }
+                do
+                    if [[ -z "$gfid_actual_paths" ]]
+                    then
+                        gfid_actual_paths=$(find_file_paths "$bpath")
+                    else
+                        break
+                    fi
+                done
+                log_can_not_heal "$gfid_actual_paths" "${file_paths}"
+            fi
+        fi
+    done < <(get_pending_entries "$volume")
+    heal_log "========================================="
+    heal_log "Total number of  potential heal : ${good}"
+    heal_log "Total number of can not heal    : ${bad}"
+    heal_log "========================================="
+}
+
+_init "$@" && main "$@"
-- 
cgit