summaryrefslogtreecommitdiffstats
path: root/xlators/protocol/client
Commit message (Collapse)AuthorAgeFilesLines
* rpc: transport may be destroyed while rpc isn'tKrishnan Parthasarathi2014-03-052-2/+2
| | | | | | | | | | | | | | | | rpc_clnt object is destroyed after the corresponding transport object is destroyed. But rpc_clnt_reconnect, a timer driven function, refers to the transport object beyond its 'life'. Instead, using the embedded connection object prevents use after free problem wrt transport object. Also, access transport object under conn->lock. Change-Id: Iae28e8a657d02689963c510114ad7cb7e6764e62 BUG: 962619 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6751 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: conn-id should be unique when lk-heal is offPranith Kumar K2014-02-172-8/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: It was observed that in some cases client disconnects and re-connects before server xlator could detect that a disconnect happened. So it still uses previous fdtable and ltable. But it can so happen that in between disconnect and re-connect an 'unlock' fop may fail because the fds are marked 'bad' in client xlator upon disconnect. Due to this stale locks remain on the brick which lead to hangs/self-heals not happening etc. For the exact bug RCA please look at https://bugzilla.redhat.com/show_bug.cgi?id=1049932#c0 Fix: When lk-heal is not enabled make sure connection-id is different for every setvolume. This will make sure that a previous connection's resources are not re-used in server xlator. Change-Id: Id844aaa76dfcf2740db72533bca53c23b2fe5549 BUG: 1049932 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6669 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/client: Fix the possible resource leaks.Poornima2014-02-151-7/+10
| | | | | | | | | | Change-Id: Ib86dee366f5a6f0971c6472d1fb2c32dbf7f0102 BUG: 789278 Signed-off-by: Poornima <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/6985 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol: pass the size of the data in the WRITE on-wire FOPNiels de Vos2014-01-241-0/+1
| | | | | | | | | | | | | | | | | | | | | Capturing GlusterFS traffic with tcpdump and displaying it in Wireshark shows that the size of all WRITEs are 0 bytes. It seems that the attribute is not used, and the size is calculated an other way. Even if the size attribute is not used (yet), it should be set correctly to prevent confusing while debugging network traffic with Wireshark or other tools. Note that the on-wire format is not being changed with this patch. The size is already part of the structure that is exchanged between the client and server. Change-Id: I9d67fe17bf203672116dea4948328e2af4004677 BUG: 1057264 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6766 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vikhyat Umrao <vumrao@redhat.com>
* mgmt/glusterd: Improve the description in volume set help outputVarun Shastry2014-01-121-2/+8
| | | | | | | | | Change-Id: I785648970f53033a69922c23110b5eea9e47feb3 BUG: 1046030 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6573 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/client: handle network disconnect/reconnect properlyAnand Avati2013-12-031-0/+1
| | | | | | | | | | | | | if client/server state versions match, we still need to notify parent xlators of reconnection (CHILD_UP) because they were notified of CHILD_DOWN at the time of disconnection. Change-Id: I36c4bde6d8c3db9cb0c48eeb10663b56897c932e BUG: 1037267 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6396 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* core: fix errno for non-existent GFIDAnand Avati2013-11-261-1/+2
| | | | | | | | | | | | | | | | | | | When clients refer to a GFID which does not exist, the errno to be returned in ESTALE (and not ENOENT). Even though ENOENT might look "proper" most of the time, as the application eventually expects ENOENT even if a parent directory does not exist, not returning ESTALE results in resolvers (FUSE and GFAPI) to not retry resolution in uncached mode. This can result in spurious ENOENTs during concurrent path modification operations. Change-Id: I7a06ea6d6a191739f2e9c6e333a1969615e05936 BUG: 1032894 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6318 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Fixes for ZF reported by coverityM. Mohan Kumar2013-11-191-1/+3
| | | | | | | | | BUG: 1028673 Change-Id: I7c75738cca22c81c5629d579ef5bea24000e622e Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/6291 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* zerofill: Change the type of len argument of glfs_zerofill() to off_tBharata B Rao2013-11-141-1/+1
| | | | | | | | | | | | | | glfs_zerofill() can be potentially called to zero-out entire file and hence allow for bigger value of length parameter. Change-Id: I75f1d11af298915049a3f3a7cb3890a2d72fca63 BUG: 1028673 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-on: http://review.gluster.org/6266 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: M. Mohan Kumar <mohan@in.ibm.com> Tested-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: zerofill supportM. Mohan Kumar2013-11-102-0/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in the specified range. This fop will be useful when a whole file needs to be initialized with zero (could be useful for zero filled VM disk image provisioning or during scrubbing of VM disk images). Client/application can issue this FOP for zeroing out. Gluster server will zero out required range of bytes ie server offloaded zeroing. In the absence of this fop, client/application has to repetitively issue write (zero) fop to the server, which is very inefficient method because of the overheads involved in RPC calls and acknowledgements. WRITESAME is a SCSI T10 command that takes a block of data as input and writes the same data to other blocks and this write is handled completely within the storage and hence is known as offload . Linux ,now has support for SCSI WRITESAME command which is exposed to the user in the form of BLKZEROOUT ioctl. BD Xlator can exploit BLKZEROOUT ioctl to implement this fop. Thus zeroing out operations can be completely offloaded to the storage device , making it highly efficient. The fop takes two arguments offset and size. It zeroes out 'size' number of bytes in an opened file starting from 'offset' position. This patch adds zerofill support to the following areas: - libglusterfs - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi Client applications can exloit this fop by using glfs_zerofill introduced in libgfapi.FUSE support to this fop has not been added as there is no system call for this fop. Changes from previous version 3: * Removed redundant memory failure log messages Changes from previous version 2: * Rebased and fixed build error Changes from previous version 1: * Rebased for latest master TODO : * Add zerofill support to trace xlator * Expose zerofill capability as part of gluster volume info Here is a performance comparison of server offloaded zeofill vs zeroing out using repeated writes. [root@llmvm02 remote]# time ./offloaded aakash-test log 20 real 3m34.155s user 0m0.018s sys 0m0.040s [root@llmvm02 remote]# time ./manually aakash-test log 20 real 4m23.043s user 0m2.197s sys 0m14.457s [root@llmvm02 remote]# time ./offloaded aakash-test log 25; real 4m28.363s user 0m0.021s sys 0m0.025s [root@llmvm02 remote]# time ./manually aakash-test log 25 real 5m34.278s user 0m2.957s sys 0m18.808s The argument log is a file which we want to set for logging purpose and the third argument is size in GB . As we can see there is a performance improvement of around 20% with this fop. Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18 BUG: 1028673 Signed-off-by: Aakash Lal Das <aakash@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5327 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Add monotonic clocking counter for timer threadHarshavardhana2013-10-153-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/rpc: move latest added procedures to the end of the arrayNiels de Vos2013-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | While looking at the newly introduced procedures FALLOCATE and DISCARD, it seems that these were added with already existing procedure numbers. This makes the protocol incompatible with existing roll-outs. It is very confusing when new procedures are added somewhere in the middle of the array. This will cause the number of existing procedures to change. It is much preferred to add new procedures at the end of the array. This changes not only corrects the enum that generates the procedure numbers, but also the ordering in the client and server fops-array for clarity. Correcting this greatly simplifies adding support for these new procedures in Wireshark and will prevent confusion to the people reading network traces (with or without Wireshark). Change-Id: Ib9e7978531d016c7230d756b855cb94cb0793b0f BUG: 974976 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5215 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: discard (hole punch) supportBrian Foster2013-06-132-0/+136
| | | | | | | | | | | | | | | | Add support for the DISCARD file operation. Discard punches a hole in a file in the provided range. Block de-allocation is implemented via fallocate() (as requested via fuse and passed on to the brick fs) but a separate fop is created within gluster to emphasize the fact that discard changes file data (the discarded region is replaced with zeroes) and must invalidate caches where appropriate. BUG: 963678 Change-Id: I34633a0bfff2187afeab4292a15f3cc9adf261af Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/5090 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gluster: add fallocate fop supportBrian Foster2013-06-132-0/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement support for the fallocate file operation. fallocate allocates blocks for a particular inode such that future writes to the associated region of the file are guaranteed not to fail with ENOSPC. This patch adds fallocate support to the following areas: - libglusterfs - mount/fuse - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi BUG: 949242 Change-Id: Ice8e61351f9d6115c5df68768bc844abbf0ce8bd Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/4969 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Prevent excessive logging of client's "disconnect" messages.Venkatesh Somyajulu2013-05-283-3/+18
| | | | | | | | | | | | | | | | | | | | | Problem: Currently when gluster volume start force is executed, client process will talk to glusterd to get the port of the brick. But if brick's path is not available it cannot return brick's port. So client process will keep connecting and disconnecting from glusterd for port-query which is ultimately responsible for execssive logging of disconnect messages. Fix: Message will be logged just once at INFO level after the first disconnect from glusterd. Afterwards "disconnect" messages will be logged in DEBUG mode. Change-Id: I2b787f3820b5da45e090c562e5698fcfe24a02cd BUG: 959969 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4953 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* logging: Fix to avoid excessive logging.Venkatesh Somyajulu2013-05-281-2/+2
| | | | | | | | | | | | | | | | | | | | | mem_get function: Log message related to mem_pool calloc is removed as its been calculated in mempool 'stats'. This messgae is consuming nearly half of the total log messages in DEBUG mode. dht_hash_compute function: Changed log level from DEBUG to TRACE. client_fdctx_destroy function: Changed log level from DEBUG to TRACE. Change-Id: Ic948db0419e76df4e95ebd0cabaf66eadbaada6b BUG: 966851 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/5086 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* client: Reset remote-port on first disconnect from brickKrishnan Parthasarathi2013-05-161-5/+9
| | | | | | | | | | Change-Id: I8940358788a7c4f8be81d705749f668a43422b8e BUG: 962930 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4988 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol/client: Print valid loc identifiersPranith Kumar K2013-04-031-35/+27
| | | | | | | | | | Change-Id: I45f91105862a2484b8906a7a63b98ab4aaf80d05 BUG: 924643 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4683 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Use proper libtool option -avoid-version instead of bogus -avoidversionAnand Avati2013-02-071-1/+1
| | | | | | | | | | Change-Id: I1c9541058c7d07786539a3266ca125a6a15287d8 BUG: 859835 Signed-off-by: Anand Avati <avati@redhat.com> Original-author: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Signed-off-by: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Reviewed-on: http://review.gluster.org/3967 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/client: Avoid double free of framePranith Kumar K2013-02-041-2/+1
| | | | | | | | | | | | | | | When client_submit_request fails it calls cbk. The cleanups should happen only in cbk. The code committed as part of http://review.gluster.org/4357 violates this. Also found that clnt_release_reopen_fd violates this as well. This patch fixes these issue. Change-Id: Ic02ba278724b03c65c00b686c39fd7846122618a BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4464 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Periodically attempt reopensPranith Kumar K2013-02-034-92/+262
| | | | | | | | | | | | | | | | | | | | | | If the brick is taken down and the hard disk is replaced and the brick is brought back up, the re-opens of the open-fds will fail because the file is not present on the brick. Re-opens are not attempted even if the files are re-created by self-heal until the brick is brought down after the files are re-created and brought back up. This is a problem with a VM-store in a replica-setup. Until the fd is re-opened the writes will never happen on the brick where the hard-disk is replaced. To handle this situation gracefully, client xlator is enhanced to perform finodelk, fxattrop, writev, readv using anonymous fds if the file is yet to be re-opened. If the fop succeeds then client xlator attempts re-open. Change-Id: I1cc6d1bbf8227cd996868ab2ed0a57fb05e00017 BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4358 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol/client: Add fdctx back to saved-list after reopenPranith Kumar K2013-02-034-451/+76
| | | | | | | | | Change-Id: I01caa1b51570359e6e3ffe1ffb7279cbdb0b0c64 BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4357 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd/cli: Updated the options descriptions for "volume set help"Avra Sengupta2013-01-211-2/+5
| | | | | | | | | Change-Id: I0db00b7334bb9707ab48bd661ac03a3ad818d6e4 BUG: 893458 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4393 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: print a message regarding brick status in case of failureKrutika Dhananjay2012-12-201-1/+3
| | | | | | | | | | | | | | that way, it would help admins to look at the corresponding brick directly. All credit goes to Amar. Change-Id: I959df59111864cc0574945d827f8fe5f2d919491 BUG: 839021 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/4341 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/client: log ENOENT errors in debug mode.Raghavendra Bhat2012-12-041-2/+3
| | | | | | | | | Change-Id: I9b4ffb4a2f6be7ff5a0521f6582a9bc6f172e26c BUG: 872490 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4153 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: add an option to filter O_DIRECT flag in openAmar Tumballi2012-11-282-2/+26
| | | | | | | | | | | | | | | | with the option, the idea is all client-side caching will be disabled, where as on server side process, the fd will be treated as a regular fd, thus helping the performance better. "gluster volume set <VOLNAME> remote-dio enable" would set this option in client protocol volumes. Change-Id: Id2255a167137f8fee20849513e3011274dc829b4 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 845213 Reviewed-on: http://review.gluster.org/4206 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocols: Suppress getxattr log when errno is ENOENTPranith Kumar K2012-10-281-1/+3
| | | | | | | | | Change-Id: I3f4fe3f382aec5fd142cc409b80bd73aebd8b39b BUG: 861015 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4097 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/client: Conditional logging in client3_3_unlink_cbkVenkatesh Somyajulu2012-10-121-1/+5
| | | | | | | | | Change-Id: I4af398362cdb3f99782dcd3728988e4cf1fbb479 BUG: 861925 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4069 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* client-handshake: synchronize config.remote_port setting b/wRaghavendra G2012-10-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | rpc_clnt_reconnect and client_query_portmap_cbk problem: ------- Theoretically there is a possibility that we could complete querying the remote brick's port number before rpc_transport_connect can return. If rpc_clnt_reconnect happens to be the caller of rpc_transport_connect and we've already got the remote brick's port number by the time rpc_transport_connect returns, without synchronization, rpc_clnt_connect resets config.remote_port to zero even before we have attempted a connection with remote brick. fix: --- By making only poll thread do setting and resetting of config.remote_port, we avoid the race-condition. Change-Id: I51879ba1cac651a80ff5c9c070ec7fe1ceea9e05 BUG: 765051 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.org/4044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: split CPPFLAGS from CFLAGSJeff Darcy2012-10-031-2/+4
| | | | | | | | | | | | | | | | | Automake provides a separate variable for preprocessor flags (*_CPPFLAGS). They are already uses in a few places, so make it consistent and use it everywhere. Note that cflags obtained from pkg-config often are cppflags, which is why LIBXML2_CFLAGS moves with into AM_CPPFLAGS, for example. Change-Id: I15feed1d18b2ca497371271c4b5876d5ec6289dd BUG: 862082 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4029 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: remove useless explicit -fPIC -shared fromJeff Darcy2012-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | CFLAGS libtool will automatically add "-fPIC" to the compiler command line as needed, so there is no need to specify it separately. "-shared" is normally a linker flag and has an odd effect when used with libtool --mode=compile, namely that it inhibits production of static objects. For that however, using AC_DISABLE_STATIC is a lot simpler. Change-Id: Ic4cba0fad18ffd985cf07f8d6951a976ae59a48f BUG: 862082 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4027 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: remove -nostartfiles flagJeff Darcy2012-10-021-1/+1
| | | | | | | | | | | | | | | The "-nostartfiles" is a discouraged option and is documented to potentially result in undesired behavior. Since I see no reason why it should be in glusterfs, remove it. Change-Id: I56f2b08874516ebad91447b2583ca2fb776bb7ab BUG: 862082 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4018 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: consolidate common compilation flags into one variableJeff Darcy2012-10-011-1/+1
| | | | | | | | | | | | | | | Some -D flags are present in all files, so collect them. This adds -D${GF_HOST_OS} to some compiler command lines, but this should not be a problem. Change-Id: I1aeb346143d4984c9cc4f2750c465ce09af1e6ca BUG: 862082 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4013 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: quick-reconnect after portmap queryAnand Avati2012-09-253-1/+11
| | | | | | | | | | | | | | | | | | Currently the disconnect after a portmap query is treated like an ordinary disconnect and the reconnection attempt (in this case, to the brick) is attempted only after 3 secs. This results in a delay which is unnecessary. Mark the disconnection happening because of a successful portmap query as needing a 'quick reconnect' to avoid the delay for this special case. Change-Id: I43c8292ff0c30858d883ff3569a3761acbf2f5eb BUG: 860220 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/3994 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* protocol/client: Fix negative return in client_setvolumeKrutika Dhananjay2012-08-011-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: The function dict_serialized_length could, owing to an error, return a negative integer (-EINVAL) that gets assigned to an unsigned int member 'dict_len' of gf_setvolume_req structure. FIX: Hold the value returned by dict_serialized_length in local variable ret (which is a signed int). Test if ret is negative, in which case the control would anyway branch to the label fail where the function returns. Otherwise dict_len is assigned with ret, in turn giving a more meaningful value to the attribute length. TEST: Attached gdb to glusterfs mount process, set breakpoint at client_setvolume, forced dict_serialized_length to return -EINVAL (indirectly by forcing _dict_serialized_length to return -EINVAL after setting count to -1 within its body) and checked the value of ret (which is now sure to contain a negative value) whose value will be appropriately tested to decide the next course of action within client_setvolume: whether to simply exit due to an error or execute the subsequent statements. Change-Id: Ib22ad8f30d8ae04acaf2ff5bfee9c348a2c47148 BUG: 789278 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.com/3755 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* remove useless if-before-free (and free-like) functionsJim Meyering2012-07-134-286/+142
| | | | | | | | | | | | See comments in http://bugzilla.redhat.com/839925 for the code to perform this change. Signed-off-by: Jim Meyering <meyering@redhat.com> BUG: 839925 Change-Id: I10e4ecff16c3749fe17c2831c516737e08a3205a Reviewed-on: http://review.gluster.com/3661 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: variable name changesAmar Tumballi2012-07-122-192/+192
| | | | | | | | | | | | | 's/3_1/3_3/g' in case of glusterfs protocol 's/3_1_/_/g' in case of CLI and mgmt protocol Change-Id: I6e6510d02c05f68f290c52ed284c04576326e12c Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 764890 Reviewed-on: http://review.gluster.com/3632 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: add extra arguments to _callback's actor functionAmar Tumballi2012-07-112-4/+5
| | | | | | | | | | | | | Need to differentiate the callback functions based on which rpc-clnt the callback is received. without it, all callback actor handling will be like global. BUG: 839345 Change-Id: Ide024f5585eab3c5fe6c3b33250772fb6e8ad655 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.com/3656 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* xlators/protocol: better filenameAmar Tumballi2012-07-042-2/+3
| | | | | | | | | | | | | | 3_1 name was used for very first version of GlusterFS which used RPC for its protocol, even though we changed protocol after 3.1.x, we kept the name of few files as is. Changed the file names to something better. Change-Id: I297f1979e7c7e909e60674eec2e632506bc776f5 BUG: 764890 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.com/3628 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Re-open should not have O_CREAT|O_TRUNC|O_EXCLPranith Kumar K2012-06-193-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RCA The bug is observed in 3.2.x because posix xlator changes the uid/gid of file as per frame->root-uid/gid if O_CREAT flag is set in open fop. Posix does not do this in 3.3.x so that bug does not appear anymore but this issue exposed the actual bug in client xlator re-open. Re-open of a file on re-connection should not perform re-open with the same flags at the time of open/create/opendir. Imagine a case where a file is opened with O_TRUNC|O_RDWR and some data is written to it, now if the brick goes down and comes back the file will be truncated. When I tested this case, the file is not truncated because locks xlator resets O_TRUNC unconditionally. Client xlator re-open bug and locks xlator bug cancel each other. Fix Reset O_CREAT|O_TRUNC|O_EXCL flags in re-open. Locks xlator should not reset O_TRUNC. Additional changes Removed wbflags as it is not assigned at all. Testcases Automated go program is at: ://bugzilla.redhat.com/show_bug.cgi?id=807976#c2 Change-Id: I0080344fdda2e62e7c976c35a5bf5f1fa8838891 BUG: 807976 Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/3582 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Remember the gfid of opened fdPranith Kumar K2012-06-063-112/+107
| | | | | | | | | | | | | | | | This is needed when the fresh lookup triggers self-heal, gfid won't be present in inode yet. Similar situation happens with Rebalance as it does not perform inode_link. Added similar fix for re-opendir. Removed inode from fdctx and removed some duplication of code. Change-Id: Ic94e5738c8585ed86801d2eed9ddab1015246710 BUG: 826080 Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/3517 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* replicate: default read_child to a local brick if there is one.Jeff Darcy2012-06-051-2/+2
| | | | | | | | | | | Controlled by the "choose-local" option (on by default). Change-Id: I560f27c81703f2c9c62fdb51532c8eb763826df7 BUG: 806462 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.com/3005 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: do not ignore the xdata received for some fopsRaghavendra Bhat2012-06-031-0/+11
| | | | | | | | | | | | | opendir, fsetattr, fsync, lk were sending NULL xdata to the server even though it (xdata) had values within it. Change-Id: Ic274ab903c5c1e443409dd250ede80cd85d10b36 BUG: 826923 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.com/3502 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: provide a buffer for storing reply of readlink.Raghavendra G2012-06-011-7/+46
| | | | | | | | | | | | | since a readlink response can be bigger than size of rdma-msges that can be inlined, we need to provide a buffer where server can do an rdma-write of response. Change-Id: I6ab06c3a94702f810ab0c57b409aaaf35cc93057 BUG: 822337 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.com/3464 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: do not access the local object after being freedRaghavendra Bhat2012-05-311-2/+2
| | | | | | | | | | Change-Id: I2d3aeb084168b9ed68a670b91e09126917f82968 BUG: 826588 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.com/3494 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol: do not log getxattr/ENODATA as warningAnand Avati2012-05-291-1/+1
| | | | | | | | | | | | When SELinux is enabled, most of the files do not have labels and result is a ton of unnecessary logs Change-Id: I0e781e2fb6bcfb3fb12298175a41f7b981af9c39 BUG: 811217 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.com/3486 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* protocol/client: use correct xlator object while creating framesRaghavendra G2012-05-231-2/+2
| | | | | | | | | | | during reopening files and reacquiring locks. Change-Id: I29f42fcfa9e782ce9e323e53024e5034029914a7 BUG: 822337 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.com/3420 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: do not print the null gfid when symlink failsRaghavendra Bhat2012-05-221-3/+6
| | | | | | | | | Change-Id: I1a2748768bc30a00c4f7b2e2fda1d282bc581658 BUG: 823880 Signed-off-by: Raghavendra Bhat <raghavendrabhat@gluster.com> Reviewed-on: http://review.gluster.com/3411 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol: handle proper vector size for writev()/readv()Amar Tumballi2012-05-211-0/+15
| | | | | | | | | | | | | | | * fixes the offset handling issue when 'xdata' is sent in writev/readv fop at the transport layer itself. * client_writev() was not sending xdata on wire, fixed Change-Id: Ib5ced64c84d415f07032662017979c65d9a1a128 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 808078 Reviewed-on: http://review.gluster.com/3182 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: free the 'loc2' variable of client_localAmar Tumballi2012-05-211-0/+1
| | | | | | | | | | | | in common client_local_wipe(), local->loc2 was not getting freed up, but its used in few functions for logging purpose. Change-Id: I05715843b59aa216a79f5164a152c605dc9ad114 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 823133 Reviewed-on: http://review.gluster.com/3388 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>